RMG: don't store and load geometry during emulation start or end

ref: #461

.github/workflows/build.yml

@@ -3,61 +3,138 @@ name: RMG
 on: [push, pull_request]
 
 jobs:
-  Linux:
-    runs-on: ubuntu-22.04
+  build-linux:
+    strategy:
+      matrix:
+        include:
+          - { os: ubuntu-24.04, features: ON, architecture: x86_64, configuration: Release }
+          - { os: ubuntu-24.04, features: ON, architecture: x86_64, configuration: Debug }
+          - { os: ubuntu-24.04, features: OFF, architecture: x86_64, configuration: Release }
+          - { os: ubuntu-24.04, features: OFF, architecture: x86_64, configuration: Debug }
+          - { os: ubuntu-24.04-arm, features: ON, architecture: aarch64, configuration: Release }
+          - { os: ubuntu-24.04-arm, features: ON, architecture: aarch64, configuration: Debug }
+          - { os: ubuntu-24.04-arm, features: OFF, architecture: aarch64, configuration: Release }
+          - { os: ubuntu-24.04-arm, features: OFF, architecture: aarch64, configuration: Debug }
+    runs-on: ${{ matrix.os }}
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v6
         with:
           fetch-depth: 0
-      - uses: hendrikmuhs/ccache-action@v1.2.5
+      - uses: hendrikmuhs/ccache-action@v1.2
         with:
-          key: Linux
+          key: linux-${{ matrix.architecture }}-${{ matrix.features }}-${{ matrix.configuration }}
       - name: Install Packages
         run: |
-          sudo apt-get -qq update
-          sudo apt-get upgrade
-          sudo apt-get -y install cmake ninja-build libhidapi-dev libsamplerate0-dev libspeex-dev libminizip-dev libsdl2-dev libfreetype6-dev libgl1-mesa-dev libglu1-mesa-dev pkg-config zlib1g-dev binutils-dev libspeexdsp-dev qt6-base-dev libqt6svg6-dev build-essential nasm git zip
+          # remove and disable snap, this fixes long update times
+          # taken from https://github.com/ading2210/gh-actions-remove-snap/blob/main/workflow.sh
+          sudo systemctl disable --now snapd
+          sudo apt-get purge -y snapd
+          echo "Package: snapd"    | sudo tee /etc/apt/preferences.d/disable-snap.pref
+          echo "Pin: release a=*"  | sudo tee -a /etc/apt/preferences.d/disable-snap.pref
+          echo "Pin-Priority: -10" | sudo tee -a /etc/apt/preferences.d/disable-snap.pref
+          sudo apt-mark hold firefox
+
+          sudo apt-get -y update
+          sudo apt-get -y upgrade
+          sudo apt-get -y install cmake libusb-1.0-0-dev libhidapi-dev libsamplerate0-dev libspeex-dev libminizip-dev libfreetype6-dev \
+            libgl1-mesa-dev libglu1-mesa-dev pkg-config zlib1g-dev binutils-dev libspeexdsp-dev qt6-base-dev libqt6svg6-dev libqt6websockets6-dev libvulkan-dev \
+            build-essential nasm git zip appstream xvfb qt6ct mesa-vulkan-drivers
+
+          # sdl3 dependencies
+          sudo apt-get -y install build-essential git make \
+            pkg-config cmake ninja-build gnome-desktop-testing libasound2-dev libpulse-dev \
+            libaudio-dev libjack-dev libsndio-dev libx11-dev libxext-dev \
+            libxrandr-dev libxcursor-dev libxfixes-dev libxi-dev libxss-dev libxtst-dev \
+            libxkbcommon-dev libdrm-dev libgbm-dev libgl1-mesa-dev libgles2-mesa-dev \
+            libegl1-mesa-dev libdbus-1-dev libibus-1.0-dev libudev-dev
       - name: Prepare Environment
         run: |
           echo "GIT_REVISION=$(git describe --tags --always)" >> $GITHUB_ENV
-      - name: Build RMG (Portable)
-        run: ./Source/Script/Build.sh Release
+      - name: Build SDL3
+        run: |
+          export sdl_dir="$(pwd)/../SDL3"
+
+          git clone https://github.com/libsdl-org/SDL.git "$sdl_dir" -b release-3.2.28 --depth=1
+
+          mkdir -p "$sdl_dir/build"
+          cmake -S "$sdl_dir" -B "$sdl_dir/build" \
+                -DCMAKE_BUILD_TYPE="Release" \
+                -DCMAKE_INSTALL_LIBDIR="lib/${{ matrix.architecture }}-linux-gnu" \
+                -DCMAKE_INSTALL_FULL_LIBDIR="/usr/lib/${{ matrix.architecture }}-linux-gnu" \
+                -DCMAKE_C_COMPILER_LAUNCHER=ccache \
+                -DCMAKE_CXX_COMPILER_LAUNCHER=ccache
+
+          cmake --build "$sdl_dir/build" --parallel "$(nproc)"
+          sudo cmake --install "$sdl_dir/build" --prefix /usr/
+      - name: Build RMG (AppImage)
+        run: |
+          export src_dir="$(pwd)"
+          export build_dir="$(pwd)/Build/AppImage"
+          export bin_dir="$(pwd)/Bin/AppImage"
+    
+          mkdir $build_dir Bin/ -p
+          cmake -S "$src_dir" -B "$build_dir" -DCMAKE_BUILD_TYPE="${{ matrix.configuration }}" \
+                -DNETPLAY=${{ matrix.features }} \
+                -DVRU=${{ matrix.features }} \
+                -DUSE_ANGRYLION=${{ matrix.features }} \
+                -DUPDATER=${{ matrix.features }} \
+                -DAPPIMAGE_UPDATER=${{ matrix.features }} \
+                -DPORTABLE_INSTALL=OFF \
+                -DCMAKE_INSTALL_PREFIX="/usr" \
+                -DCMAKE_INSTALL_LIBDIR="lib"  \
+                -G "Unix Makefiles"
+
+          cmake --build "$build_dir" --parallel "$(nproc)"
+          cmake --install "$build_dir" --strip --prefix="$bin_dir/usr"
         shell: bash
-      - name: Upload RMG (Portable)
-        uses: actions/upload-artifact@v3
+      - name: Create AppImage
+        if: ${{ matrix.features == 'ON' && matrix.architecture == 'x86_64' && matrix.configuration == 'Release' }}
+        run: |
+          ./Package/AppImage/Create.sh
+        shell: bash
+      - name: Upload RMG (AppImage)
+        if: ${{ matrix.features == 'ON' && matrix.architecture == 'x86_64' && matrix.configuration == 'Release' }}
+        uses: actions/upload-artifact@v5
         with:
           name: RMG-Portable-Linux64-${{ env.GIT_REVISION }}
-          path: Bin/Release/*
+          path: Bin/*.AppImage
 
-  Windows:
-    runs-on: windows-2019
+  build-windows:
+    runs-on: windows-2025
+    strategy:
+      matrix:
+        include:
+          - { features: ON, configuration: Release }
+          - { features: ON, configuration: Debug }
+          - { features: OFF, configuration: Release }
+          - { features: OFF, configuration: Debug }
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v6
         with:
           fetch-depth: 0
-      - uses: hendrikmuhs/ccache-action@v1.2.5
+      - uses: hendrikmuhs/ccache-action@v1.2
         with:
-          key: Windows
+          key: windows-${{ matrix.features }}-${{ matrix.configuration }}
       - uses: msys2/setup-msys2@v2
         with:
           path-type: inherit
           update: true
+          msystem: ucrt64
           install: >-
             make
-            mingw-w64-x86_64-cmake
-            mingw-w64-x86_64-ninja
-            mingw-w64-x86_64-gcc
-            mingw-w64-x86_64-hidapi
-            mingw-w64-x86_64-freetype
-            mingw-w64-x86_64-libpng
-            mingw-w64-x86_64-SDL2
-            mingw-w64-x86_64-qt6
-            mingw-w64-x86_64-SDL2
-            mingw-w64-x86_64-hidapi
-            mingw-w64-x86_64-speexdsp
-            mingw-w64-x86_64-libsamplerate
-            mingw-w64-x86_64-nasm
-            mingw-w64-x86_64-minizip
+            mingw-w64-ucrt-x86_64-cmake
+            mingw-w64-ucrt-x86_64-gcc
+            mingw-w64-ucrt-x86_64-freetype
+            mingw-w64-ucrt-x86_64-libpng
+            mingw-w64-ucrt-x86_64-sdl3
+            mingw-w64-ucrt-x86_64-qt6
+            mingw-w64-ucrt-x86_64-libusb
+            mingw-w64-ucrt-x86_64-hidapi
+            mingw-w64-ucrt-x86_64-speexdsp
+            mingw-w64-ucrt-x86_64-libsamplerate
+            mingw-w64-ucrt-x86_64-nasm
+            mingw-w64-ucrt-x86_64-minizip
+            mingw-w64-ucrt-x86_64-vulkan-headers
             git
       - name: Prepare Environment
         run: |
@@ -65,17 +142,38 @@ jobs:
           echo "GIT_REVISION=$env:revision" >> $env:GITHUB_ENV
         shell: pwsh
       - name: Build RMG (Portable)
-        run: ./Source/Script/Build.sh Release
+        run: |
+          export src_dir="$(pwd)"
+          export build_dir="$(pwd)/Build/${{ matrix.configuration }}"
+
+          cmake -S "$src_dir" -B "$build_dir" -DCMAKE_BUILD_TYPE="${{ matrix.configuration }}" \
+                -DNETPLAY=${{ matrix.features }} \
+                -DVRU=${{ matrix.features }} \
+                -DUSE_ANGRYLION=${{ matrix.features }} \
+                -DUPDATER=${{ matrix.features }} \
+                -DPORTABLE_INSTALL=ON \
+                -G "MSYS Makefiles"
+
+          cmake --build "$build_dir" --parallel "$(nproc)"
+          cmake --install "$build_dir" --strip --prefix="$src_dir"
+          cmake --build "$build_dir" --target=bundle_dependencies
         shell: msys2 {0}
       - name: Create Installer
+        if: ${{ matrix.features == 'ON' && matrix.configuration == 'Release' }}
         run: .\Build\Release\Source\Installer\CreateInstaller.bat
+      - name: Configure RMG (Portable)
+        if: ${{ matrix.features == 'ON' && matrix.configuration == 'Release' }}
+        run: touch Bin/Release/portable.txt
+        shell: msys2 {0}
       - name: Upload RMG (Portable)
-        uses: actions/upload-artifact@v3
+        if: ${{ matrix.features == 'ON' && matrix.configuration == 'Release' }}
+        uses: actions/upload-artifact@v5
         with:
           name: RMG-Portable-Windows64-${{ env.GIT_REVISION }}
           path: Bin/Release/*
       - name: Upload RMG (Installer)
-        uses: actions/upload-artifact@v3
+        if: ${{ matrix.features == 'ON' && matrix.configuration == 'Release' }}
+        uses: actions/upload-artifact@v5
         with:
           name: RMG-Setup-Windows64-${{ env.GIT_REVISION }}
           path: Bin/*.exe

.gitignore

@@ -8,5 +8,18 @@ Package/ArchLinux/pkg/
 Package/ArchLinux/rmg/
 Package/ArchLinux/src/
 Package/ArchLinux/*.pkg.*
+# Fedora Package
+Package/Fedora/*.rpm
+Package/Fedora/*.tar.gz
+Package/Fedora/results_*/
 # Clangd compile_commands.json
-compile_commands.json
+compile_commands.json
+# AppImage
+squashfs-root
+*.AppImage
+Package/AppImage/appimagetool
+Package/AppImage/lib4bin
+Package/AppImage/sharun
+# 3rdParty Build
+Source/3rdParty/mupen64plus-core/src/asm_defines/asm_defines_gas.h
+Source/3rdParty/mupen64plus-core/src/asm_defines/asm_defines_nasm.h

CMakeLists.txt

@@ -4,21 +4,34 @@
 cmake_minimum_required(VERSION 3.15)
 
 option(PORTABLE_INSTALL "Portable Installation" ON)
-option(NO_GIT_CLONE     "Disables git clone usage for 3rdParty dependencies" OFF)
-option(UPDATER          "Enables updater" ${PORTABLE_INSTALL})
-option(DISCORD_RPC      "Enables Discord Rich Presence" ON)
+option(UPDATER          "Enables updater" ${WIN32})
+option(APPIMAGE_UPDATER "Enables AppImage updater" OFF)
+option(KCA_DRAG_DROP    "Enables drag and drop using KCoreAddons" OFF) # https://bugreports.qt.io/browse/QTBUG-91357
+option(NETPLAY          "Enables netplay" ON)
+option(VRU              "Enables VRU support in RMG-Input" ON)
 option(USE_CCACHE       "Enables usage of ccache when ccache has been found" ON)
+option(NO_ASM           "Disables the usage of assembly in the mupen64plus-core" OFF)
+option(USE_ANGRYLION    "Enables building angrylion-rdp-plus which uses a non-GPL compliant license" OFF)
 
 project(RMG)
 
-find_package(Git REQUIRED)
-execute_process(
-    COMMAND ${GIT_EXECUTABLE} describe --tags --always
-    WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}"
-    OUTPUT_VARIABLE GIT_VERSION
-    ERROR_QUIET
-    OUTPUT_STRIP_TRAILING_WHITESPACE
-)
+find_package(Git)
+if (GIT_FOUND)
+    execute_process(
+        COMMAND ${GIT_EXECUTABLE} describe --tags --always
+        WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}"
+        RESULT_VARIABLE GIT_RESULT
+        OUTPUT_VARIABLE GIT_VERSION
+        ERROR_QUIET
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+    )
+endif(GIT_FOUND)
+if (NOT GIT_FOUND OR NOT ${GIT_RESULT} EQUAL 0)
+    if (NOT ${GIT_RESULT} EQUAL 0)
+        message(WARNING "git failed to retrieve the current revision, falling back to VERSION file!")
+    endif()
+    file(STRINGS "VERSION" GIT_VERSION)
+endif()
 
 if (USE_CCACHE)
     find_program(CCACHE_FOUND ccache)
@@ -29,65 +42,110 @@ if (USE_CCACHE)
     endif(CCACHE_FOUND)
 endif(USE_CCACHE)
 
-if (NOT PORTABLE_INSTALL AND (WIN32 OR MSYS))
+if (NOT PORTABLE_INSTALL AND WIN32)
     message(WARNING "Not-Portable build not supported on windows, re-enabling PORTABLE_INSTALL!")
     set(PORTABLE_INSTALL ON)
 endif()
 
-if (NOT PORTABLE_INSTALL AND UPDATER)
+if (NOT PORTABLE_INSTALL AND UPDATER AND NOT APPIMAGE_UPDATER)
     message(WARNING "Not-Portable builds don't support the updater, disabling UPDATER")
     set(UPDATER OFF)
 endif()
 
+if (APPIMAGE_UPDATER AND WIN32)
+    message(WARNING "AppImage updater not supported on windows, disabling APPIMAGE_UPDATER!")
+    set(APPIMAGE_UPDATER OFF)
+endif()
+
+if (UPDATER AND NOT WIN32 AND NOT APPIMAGE_UPDATER)
+    message(WARNING "Only AppImage updater is supported on linux, disabling UPDATER!")
+    set(UPDATER OFF)
+endif()
+
+if (FORCE_XCB AND WIN32)
+    message(WARNING "XCB Qt platform not supported on windows, disabling FORCE_XCB!")
+    set(FORCE_XCB OFF)
+endif()
+
 if (PORTABLE_INSTALL)
     set(CMAKE_INSTALL_PREFIX "")
     set(INSTALL_PATH "Bin/${CMAKE_BUILD_TYPE}")
     set(RMG_INSTALL_PATH "${INSTALL_PATH}")
+    set(SYSTEM_LIB_INSTALL_PATH "${INSTALL_PATH}")
+    set(LIB_INSTALL_PATH "${INSTALL_PATH}")
     set(CORE_INSTALL_PATH "${INSTALL_PATH}/Core")
     set(PLUGIN_INSTALL_PATH "${INSTALL_PATH}/Plugin")
     set(DATA_INSTALL_PATH "${INSTALL_PATH}/Data")
     set(INSTALL_DESKTOP_FILE OFF)
 else()
-    set(RMG_INSTALL_PATH "bin")
-    set(CORE_INSTALL_PATH "lib/RMG/Core")
-    set(PLUGIN_INSTALL_PATH "lib/RMG/Plugin")
-    set(DATA_INSTALL_PATH "share/RMG")
+    include(GNUInstallDirs)
+    set(RMG_INSTALL_PATH "${CMAKE_INSTALL_BINDIR}")
+    set(SYSTEM_LIB_INSTALL_PATH "${CMAKE_INSTALL_LIBDIR}")
+    set(LIB_INSTALL_PATH "${SYSTEM_LIB_INSTALL_PATH}/RMG")
+    set(CORE_INSTALL_PATH "${SYSTEM_LIB_INSTALL_PATH}/RMG/Core")
+    set(PLUGIN_INSTALL_PATH "${SYSTEM_LIB_INSTALL_PATH}/RMG/Plugin")
+    set(DATA_INSTALL_PATH "${CMAKE_INSTALL_DATADIR}/RMG")
     set(INSTALL_DESKTOP_FILE ON)
-    set(APPDATA_INSTALL_PATH "share/metainfo/")
-    set(DESKTOP_INSTALL_PATH "share/applications")
-    set(ICON_INSTALL_PATH "share/icons/hicolor/scalable/apps/")
+    set(METAINFO_INSTALL_PATH "${CMAKE_INSTALL_DATADIR}/metainfo/")
+    set(DESKTOP_INSTALL_PATH "${CMAKE_INSTALL_DATADIR}/applications")
+    set(ICON_INSTALL_PATH "${CMAKE_INSTALL_DATADIR}/icons/hicolor/scalable/apps/")
 endif()
 
 add_subdirectory(Source/3rdParty)
+add_subdirectory(Source/3rdParty/lzma)
+if (VRU)
+    add_subdirectory(Source/3rdParty/vosk-api)
+endif(VRU)
 
 add_subdirectory(Source/RMG-Core)
 add_subdirectory(Source/RMG)
 add_subdirectory(Source/RMG-Audio)
 add_subdirectory(Source/RMG-Input)
+add_subdirectory(Source/RMG-Input-GCA)
+install(TARGETS RMG-Core
+    DESTINATION ${SYSTEM_LIB_INSTALL_PATH}
+)
 install(TARGETS RMG
     DESTINATION ${RMG_INSTALL_PATH}
 )
 install(TARGETS RMG-Audio
     DESTINATION ${PLUGIN_INSTALL_PATH}/Audio
 )
-install(TARGETS RMG-Input
+install(TARGETS RMG-Input RMG-Input-GCA
     DESTINATION ${PLUGIN_INSTALL_PATH}/Input
 )
 
 if (WIN32)
     add_subdirectory(Source/Installer)
-    
+
     add_custom_target(bundle_dependencies
-        COMMAND bash "${CMAKE_SOURCE_DIR}/Source/Script/BundleDependencies.sh" "${CMAKE_SOURCE_DIR}/Bin/${CMAKE_BUILD_TYPE}/RMG.exe" "${CMAKE_SOURCE_DIR}/Bin/${CMAKE_BUILD_TYPE}" "/mingw64/bin"
+        COMMAND bash "${CMAKE_SOURCE_DIR}/Source/Script/BundleDependencies.sh" "${CMAKE_SOURCE_DIR}/Bin/${CMAKE_BUILD_TYPE}/RMG.exe" "${CMAKE_SOURCE_DIR}/Bin/${CMAKE_BUILD_TYPE}"
 	)
 endif(WIN32)
 
+set(LIB_PERMISSIONS OWNER_READ OWNER_EXECUTE OWNER_WRITE
+                    GROUP_READ GROUP_EXECUTE
+                    WORLD_READ WORLD_EXECUTE)
+
 install(FILES ${MUPEN64PLUSCORE_LIB}
     DESTINATION ${CORE_INSTALL_PATH}
+    PERMISSIONS ${LIB_PERMISSIONS}
 )
 install(FILES ${MUPEN64PLUSCORE_INI} Data/font.ttf
     DESTINATION ${DATA_INSTALL_PATH}
 )
+if (VRU)
+    install(FILES ${VOSK_API_LIBRARY}
+        DESTINATION ${LIB_INSTALL_PATH}
+        PERMISSIONS ${LIB_PERMISSIONS}
+    )
+    install(FILES ${VOSK_API_MODEL}
+        DESTINATION ${DATA_INSTALL_PATH}
+    )
+endif(VRU)
+install(FILES ${SDL_GAMECONTROLLERDB} ${CMAKE_SOURCE_DIR}/Data/InputProfileDB.json
+    DESTINATION ${DATA_INSTALL_PATH}
+)
 file(GLOB GENERATED_CHEAT_FILES ${CMAKE_SOURCE_DIR}/Data/Cheats/Generated/*.cht)
 file(GLOB CUSTOM_CHEAT_FILES ${CMAKE_SOURCE_DIR}/Data/Cheats/Custom/*.cht)
 install(FILES ${GENERATED_CHEAT_FILES} ${CUSTOM_CHEAT_FILES}
@@ -95,27 +153,36 @@ install(FILES ${GENERATED_CHEAT_FILES} ${CUSTOM_CHEAT_FILES}
 )
 install(FILES ${MUPEN64PLUS_PLUGIN_RSP_CXD4}
     DESTINATION ${PLUGIN_INSTALL_PATH}/RSP
+    PERMISSIONS ${LIB_PERMISSIONS}
 )
 install(FILES ${MUPEN64PLUS_PLUGIN_RSP_HLE}
     DESTINATION ${PLUGIN_INSTALL_PATH}/RSP
+    PERMISSIONS ${LIB_PERMISSIONS}
 )
 install(FILES ${MUPEN64PLUS_PLUGIN_RSP_PARALLEL}
     DESTINATION ${PLUGIN_INSTALL_PATH}/RSP
+    PERMISSIONS ${LIB_PERMISSIONS}
 )
 install(FILES ${MUPEN64PLUS_PLUGIN_INPUT_RAPHNET}
     DESTINATION ${PLUGIN_INSTALL_PATH}/Input
+    PERMISSIONS ${LIB_PERMISSIONS}
 )
-install(FILES ${MUPEN64PLUS_PLUGIN_INPUT_GCA}
-    DESTINATION ${PLUGIN_INSTALL_PATH}/Input
-)
-install(FILES ${MUPEN64PLUS_PLUGIN_GFX_ANGRYLION}
-    DESTINATION ${PLUGIN_INSTALL_PATH}/GFX
-)
+if (USE_ANGRYLION)
+    install(FILES ${MUPEN64PLUS_PLUGIN_GFX_ANGRYLION}
+        DESTINATION ${PLUGIN_INSTALL_PATH}/GFX
+        PERMISSIONS ${LIB_PERMISSIONS}
+    )
+endif(USE_ANGRYLION)
 install(FILES ${MUPEN64PLUS_PLUGIN_GFX_GLIDEN64}
     DESTINATION ${PLUGIN_INSTALL_PATH}/GFX
+    PERMISSIONS ${LIB_PERMISSIONS}
+)
+install(FILES ${MUPEN64PLUS_PLUGIN_GFX_GLIDEN64_DATA}
+    DESTINATION ${DATA_INSTALL_PATH}
 )
 install(FILES ${MUPEN64PLUS_PLUGIN_GFX_PARALLEL}
     DESTINATION ${PLUGIN_INSTALL_PATH}/GFX
+    PERMISSIONS ${LIB_PERMISSIONS}
 )
 
 if (INSTALL_DESKTOP_FILE)
@@ -125,7 +192,7 @@ if (INSTALL_DESKTOP_FILE)
     install(FILES Package/com.github.Rosalie241.RMG.svg
         DESTINATION ${ICON_INSTALL_PATH}
     )
-    install(FILES Package/com.github.Rosalie241.RMG.appdata.xml
-        DESTINATION ${APPDATA_INSTALL_PATH}
+    install(FILES Package/com.github.Rosalie241.RMG.metainfo.xml
+        DESTINATION ${METAINFO_INSTALL_PATH}
     )
 endif(INSTALL_DESKTOP_FILE)

Data/Cheats/Custom/1FBAF161-2C1C54F1-41.cht

@@ -0,0 +1,64 @@
+[1FBAF161-2C1C54F1-C:41]
+Name=1080 Snowboarding (JU) (M2)
+
+$Enable All Levels & Boarders
+80255089 00FF
+8025508B 0005
+81255096 FCFF
+80255098 0007
+
+$Have All\Contest First Place Done
+80244098 0007
+
+$Have All\Match Levels Completed
+8025508A 0005
+
+$Have All\Trick Attacks Done
+81255096 FCFF
+
+$Infinite Damage All Players & Levels
+803F4C3C 0024
+807F4C3C 0024
+
+$Infinite Lives & Continues
+8026B1CB 0003
+
+$Always First Place (Player 1)
+81267B88 2400
+Note=The game will still show you in 2nd when you are behind. But when you cross the finish line, you will win!
+
+$Open Level Character Select
+Note=With these codes, you have to press the buttons listed below when you are viewing a certain boarders stats. Highlight Akari Hayami's stats, and then hold down the C-Left button and then press the A button to be the Crystal Boarder. Highlight Kensuke Kimachi's stats, and then hold down the C-Up button and then press the A button to be the Metal Boarder. Hightlight Rob Haywood's stats, and then hold down the C-Right button and then press the A button to be the Panda Boarder
+8125508A 00??
+01 Easy Level
+02 Easy & Normal Level
+03 Easy Normal & Hard Levels
+04 Easy Normal Hard Levels & Crystal Boarder
+05 Easy Normal Hard Levels & Crystal & Metal Boarders
+
+$Play As
+800200E7 00??
+00 Dion Blaster
+01 Kensuke Kimachi
+02 Akari Hayami
+03 Ricky Winterborn
+04 Rob Haywood
+05 Silver Boarder
+06 Gold Boarder
+07 Panda Boarder
+
+$Freeze Timer In\Match Race
+D1267B20 05E1
+81267B20 1000
+
+$Freeze Timer In\Time Attack
+D12660CC 05E1
+812660CC 1000
+
+$Freeze Timer In\Trick Attack
+D1266138 05E1
+81266138 1000
+
+$Freeze Timer In\Contest
+D126628C 05E1
+8126628C 1000

Data/Cheats/Custom/34AEB154-A4253B86-45.cht

@@ -0,0 +1,148 @@
+[34AEB154-A4253B86-C:45]
+Name=Conker's Bad Fur Day (U) [T+Spa1.1_Blade133bo]
+
+$$Acceso\Todos los Capítulos, Escenas & Personajes Multijugador
+50000401 0000
+800E9D01 00FF
+
+$$Acceso\Todos los Personajes & Armas en Multi Race
+810E9D02 ??FF
+FF Todos los Personajes & Bate de Béisbol
+FB Todos los Personajes & Sartén
+F3 Todos los Personajes & Huesos
+
+$$Seleccionar Velocidad de Conker
+810CC318 ????
+3F00 Conker Lento
+3F80 Conker Normal
+3FF0 Conker Rápido
+4030 Conker Superrápido
+
+$$Infinito\Recuento de Precisión Jugador 1
+Note=SOLO EN MULTI. Solo pon este código una vez que estés en el juego.
+800E0B67 0001
+
+$$Infinito\Bolsas En Heist
+800E0BE4 00FF
+
+$$Infinito\Bombas
+802055CA 0030
+
+$$Infinito\Recuento de Disparos a la Cabeza Jugador 1
+Note=SOLO EN MULTI. Solo pon este código una vez que estés en el juego. Una vez que recojas un arma y dispares una vez, acertarás al 100%.
+800E0B6B 03E7
+
+$$Infinito\Salud\Jugador 1
+800CC49A 0006
+
+$$Infinito\Salud\Jugador 2
+800CC7C6 270F
+
+$$Infinito\Salud\Jugador 3
+800CCAF2 270F
+
+$$Infinito\Salud\Jugador 4
+800CCE1E 270F
+
+$$Infinito\Vidas Jugador 1
+800D2144 0064
+
+$$Infinito\Máximo de Muertes Jugador 1
+800E0B47 03E7
+
+$$Infinito\Lotes de Dinero
+810D214A FFFF
+
+$$Infinito\Tiempo En Multi
+8108FD7A 7500
+
+$$Modo Matrix (En Cualquier Momento)
+Note=Pulsa R para activar y luego C-Derecha para salir.
+D1042A14 0010
+800BEA0C 0001
+D1042A14 0010
+810BE574 D202
+D1042A14 0001
+800BEA0C 0000
+D1042A14 0001
+810BE574 0000
+
+$$Jugar como Opción 1
+Note=Aquí puedes elegir con quién quieres jugar, pero solo una opción a la vez. La sombra no será visible, excepto cuando juegues como Conker.
+800D213F 00??
+01 Comadreja
+02 Comadreja (Traje negro)
+03 Tedi
+04 Ardilla de Combate
+05 Conker
+08 Tanque (No se puede mover)
+09 Dinosaurio (No se puede mover)
+0B Uga
+0C Cavernícola Calvo
+0D Cavernícola
+0E Cavernícola Mohicano
+0F Cavernícola Spikey
+10 Conker Neo
+11 Aldeano Masculino
+12 Aldeano Masculino (con gafas)
+13 Aldeano Masculino (con bigote)
+14 Aldeano Masculino (con gafas y bigote)
+15 Aldeano Masculino (con sombrero)
+16 Aldeano Masculino (con sombrero y gafas)
+17 Aldeano Masculino (con sombrero y bigote)
+18 Aldeano Masculino (con sombrero y gafas y bigote)
+19 Aldeano Masculino (con gorra)
+1A Aldeano Masculino (con gorra y gafas)
+1B Aldeano Masculino (con gorra y bigote)
+1C Aldeano Masculino (con gorra y gafas y bigote)
+1D Aldeana Femenina
+1F Aldeana Femenina (con capucha y gafas)
+21 Zombi Masculino
+22 Zombi Femenino
+23 Murciélago Enemigo
+24 Conker el Murciélago
+25 Capitán del Ejercito
+26 Jefe Tedi
+27 Gregg
+28 Gregg Huesudo
+
+$$Pulsa L Para Levitar\Jugador 1
+Note=Pulsa el Botón L para Levitar y Sueltalo para bajar
+D0042A15 0020
+810CC2F0 41CB
+
+$$Pulsa L Para Levitar\Jugador 2
+Note=Pulsa el Botón L para Levitar y Sueltalo para bajar
+D0042A1D 0020
+810CC61C 41CB
+
+$$Pulsa L Para Levitar\Jugador 3
+Note=Pulsa el Botón L para Levitar y Sueltalo para bajar
+D0042A25 0020
+810CC948 41CB
+
+$$Pulsa L Para Levitar\Jugador 4
+Note=Pulsa el Botón L para Levitar y Sueltalo para bajar
+D0042A2D 0020
+810CCC74 41CB
+
+$$Activador de Animación de Espera
+800CC5C8 00??
+00 Por defecto como máximo
+02 Animaciones de espera deshabilitadas
+
+$$Selección de Arma en Multi (Al recoger)
+Note=Selecciona el arma que quieras en el modo multijugador y luego, en una recogida de armas, tendrás el arma de tu elección. (Debes tener un arma ya recogida para cambiar por la próxima.)
+80180873 00??
+01 Espada
+02 Nada
+03 Motosierra Amarilla
+04 Cuchillos Arrojadizos
+05 Rifle
+06 Revolver con Mira
+07 Lanzacohetes
+08 Escopeta
+0A Rifle Francotirador Con Alcance
+0C Metralletas Dobles
+13 Máscara Antigás
+

Data/Cheats/Custom/3A03E50F-E78D1CA7-45.cht

@@ -0,0 +1,112 @@
+[3A03E50F-E78D1CA7-C:45]
+Name=GoldenEye 007 (U) [T+Spa2.0_Sogun&IlDucci]
+
+$$Modo Depuración
+Note=Pulsa A o Start para habilitar la opción actualmente seleccionada. Al pulsar Start cuando tengas el control del jugador, abrirá el menú reloj y cerrará el menú de depuración.
+80036FCB 0001
+
+$$Tener Todo\64 personajes en multijugador
+Note=Habilita todos los personajes seleccionables para jugar en multijugador
+8002B197 0040
+
+$$Tener Todo\Objetivos Completados
+80036FD3 0001
+
+$$Todo Desbloqueado\Guardado 1
+Note=Esto desbloquea todos los niveles, etapas, personajes en el modo multijugador y elementos del menú de trucos (habilite Invencible en el menú de trucos para tener salud infinita)
+50002902 0000
+810699EE FFFF
+
+$$Todo Desbloqueado\Guardado 2
+Note=Esto desbloquea todos los niveles, etapas, personajes en el modo multijugador y elementos del menú de trucos (habilite Invencible en el menú de trucos para tener salud infinita)
+50002902 0000
+8106992E FFFF
+
+$$Todo Desbloqueado\Guardado 3
+Note=Esto desbloquea todos los niveles, etapas, personajes en el modo multijugador y elementos del menú de trucos (habilite Invencible en el menú de trucos para tener salud infinita)
+50002902 0000
+81069A4E FFFF
+
+$$Todo Desbloqueado\Guardado 4
+Note=Esto desbloquea todos los niveles, etapas, personajes en el modo multijugador y elementos del menú de trucos (habilite Invencible en el menú de trucos para tener salud infinita)
+50002902 0000
+8106998E FFFF
+
+$$Infinito\Munición (Todos los Niveles)
+80079E3B 0001
+
+$$Tener\Tiempo Infinito 00:00 (Todos los Niveles)
+8004837E 0000
+8004838E 0000
+80048396 0000
+80079A22 0000
+80079F26 0000
+
+$$Infinito\Salud (Todos los Niveles)
+8100C0F4 0801
+8100C0F6 8090
+8100C0F8 AFA4
+8100C0FA 0000
+81060240 0004
+81060242 7600
+81060244 3C02
+81060246 8008
+81060248 8C42
+8106024A 9EE0
+8106024C 3401
+8106024E 3F80
+81060250 A441
+81060252 00DC
+81060254 0800
+81060256 303F
+
+$f
+80048673 0013
+81048678 3FC0
+80048677 00D0
+8004867F 000D
+80048683 000A
+8004868B 0013
+81048690 3FC0
+8004868F 00D0
+80048697 000D
+8004869B 000A
+800486A3 0019
+810486A8 3FC0
+800486A7 00D3
+800486AF 0006
+800486B3 0003
+800486BB 0019
+810486C0 3FC0
+800486BF 00D3
+800486C7 0006
+800486CB 0003
+800486D3 0013
+810486D8 3FC0
+800486D7 00D0
+800486DF 000D
+800486E3 000A
+800486EB 0013
+810486F0 3FC0
+800486EF 00D0
+800486F7 000D
+800486FB 000A
+80048703 0019
+81048708 3FC0
+80048707 00D3
+8004870F 0006
+80048713 0003
+8004871B 0019
+81048720 3FC0
+8004871F 00D3
+80048727 0006
+8004872B 0003
+812AEA50 476F
+812AEA52 6C64
+812AEA54 656E
+812AEA56 2047
+812AEA58 756E
+812AEA5A 2046
+812AEA5C 756E
+802AEA5E 0000
+

Data/Cheats/Custom/58FD3F25-D92EAA8D-50.cht

@@ -0,0 +1,55 @@
+[58FD3F25-D92EAA8D-C:50]
+Name=1080 Snowboarding (E) (M4)
+
+$Enable All Levels & Boarders
+80250AB9 00FF
+80250ABB 0005
+81250AC6 FCFF
+80250AC8 0007
+
+$Infinite Damage All Players and Levels
+803F4C00 0024
+807F4C00 0024
+
+$Infinite Lives & Continues
+802648A4 0003
+
+$Open Level Character Select
+Note=With these codes, you have to press the buttons listed below when you are viewing a certain boarders stats. Highlight Akari Hayami's stats, and then hold down the C-Left button and then press the A button to be the Crystal Boarder. Highlight Kensuke Kimachi's stats, and then hold down the C-Up button and then press the A button to be the Metal Boarder. Hightlight Rob Haywood's stats, and then hold down the C-Right button and then press the A button to be the Panda Boarder
+8125508A 00??
+01 Easy Level
+02 Easy & Normal Level
+03 Easy Normal & Hard Levels
+04 Easy Normal Hard Levels & Crystal Boarder
+05 Easy Normal Hard Levels & Crystal & Metal Boarders
+
+$Play As
+8001A0E7 00??
+00 Dion Blaster
+01 Kensuke Kimachi
+02 Akari Hayami
+03 Ricky Winterborn
+04 Rob Haywood
+05 Silver Boarder
+06 Gold Boarder
+07 Panda Boarder
+
+$Always First Place (Player 1)
+812679BC 2400
+Note=The game will still show you in 2nd when you are behind. But when you cross the finish line, you will win!
+
+$Freeze Timer In\Match Race
+D1267954 05E1
+81267954 1000
+
+$Freeze Timer In\Time Attack
+D1265D4C 05E1
+81265D4C 1000
+
+$Freeze Timer In\Trick Attack
+D1265DB8 05E1
+81265DB8 1000
+
+$Freeze Timer In\Contest
+D1265F48 05E1
+81265F48 1000

Data/Cheats/Custom/D8C74049-29CDD8C4-50.cht

@@ -0,0 +1,50 @@
+[D8C74049-29CDD8C4-C:50]
+Name=007 - The World is Not Enough (E) [T+Spa1.0.1_IlDucci]
+
+$$Acceso\Todos los Gadgets e Items
+801147DD 0001
+
+$$Acceso\Todas las Armas
+Note=Viene con munición
+801147DC 0001
+
+$$Acceso\Todos los Niveles & Dificultades
+81103B66 0021
+50000D01 0000
+80118F38 0001
+
+$$Infinito\Oxígeno
+800E25E4 0004
+
+$$Infinito\Tiempo
+81103B82 0000
+
+$$Invencible
+811147D8 0101
+
+$$Multijugador\Acceso a Todos los Personajes Malvados
+801147EB 0001
+811147EC 0101
+801147EE 0001
+
+$$Multijugador\Acceso a Todas las Arenas
+50005C0C 0000
+800C0167 0081
+
+$$Multijugador\Acceso a Todos los Escenarios
+801147EF 0001
+811147F0 0101
+
+$$Multijugador\Acceso a Todos los Modos de Armamento
+811147F2 0101
+801147F4 0001
+
+$$Multijugador\Acceso a Q Malvado
+800C06EF 0081
+
+$$Multijugador\Acceso a Q Bueno
+800C06EF 0001
+
+$$Multijugador\Invencible
+811147D8 0101
+

Data/Cheats/Generated/0A5D8F83-98C5371A-50.cht

@@ -377,3 +377,12 @@ Note=Put this code on and it will now take where you wanted to go, turn it back
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01F30F6 0008
+811E6F06 FFFD
+D01F30F6 0004
+811E6F06 0000
+D01F30F6 0002
+811E6F06 FFFE

Data/Cheats/Generated/5354631C-03A2DEF0-45.cht

@@ -421,3 +421,12 @@ D03E6B3A 0000
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01FB876 0008
+811EF686 FFFD
+D01FB876 0004
+811EF686 0000
+D01FB876 0002
+811EF686 FFFE

Data/Cheats/Generated/69AE0438-2C63F3F3-4A.cht

@@ -361,3 +361,12 @@ D03E6FCA 0000
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01FBC96 0008
+811EF726 FFFD
+D01FBC96 0004
+811EF726 0000
+D01FBC96 0002
+811EF726 FFFE

Data/Cheats/Generated/6AECEC4F-F0924814-50.cht

@@ -388,3 +388,12 @@ Note=Put this code on and it will now take where you wanted to go, turn it back
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01F0496 0008
+811E5496 FFFD
+D01F0496 0004
+811E5496 0000
+D01F0496 0002
+811E5496 FFFE

Data/Cheats/Generated/8473D0C1-23120666-4A.cht

@@ -383,3 +383,12 @@ Note=Put this code on and it will now take where you wanted to go, turn it back
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01F8836 0008
+811ED836 FFFD
+D01F8836 0004
+811ED836 0000
+D01F8836 0002
+811ED836 FFFE

Data/Cheats/Generated/B443EB08-4DB31193-45.cht

@@ -418,3 +418,12 @@ D03E4CFA 0000
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01F88A0 0008
+811ED846 FFFD
+D01F88A0 0004
+811ED846 0000
+D01F88A0 0002
+811ED846 FFFE

Data/Cheats/Generated/C0F6DB17-80E0D532-44.cht

@@ -1,5 +1,5 @@
 [C0F6DB17-80E0D532-C:44]
-Name=Armorines Project S.
+Name=Armorines - Project S.W.A.R.M. (G)
 
 $[Press L For Levitate]
 D10F7550 0020

Data/Cheats/Generated/E97955C6-BC338D38-50.cht

@@ -394,3 +394,12 @@ Note=Put this code on and it will now take where you wanted to go, turn it back
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01F2D56 0008
+811E6B66 FFFD
+D01F2D56 0004
+811E6B66 0000
+D01F2D56 0002
+811E6B66 FFFE

Data/Cheats/Generated/EC417312-EB31DE5F-4A.cht

@@ -361,3 +361,12 @@ D05EC55A 0000
 9214 Zora Shop
 B214 Snowhead (Path to temple - warp in)
 D214 East Clock Down
+
+$Time Control
+Note=Control the speed of time with the D-pad. Up stops the time, left enables double time, and down restores the notmal speed.
+D01FBA40 0008
+811EF476 FFFD
+D01FBA40 0004
+811EF476 0000
+D01FBA40 0002
+811EF476 FFFE

Data/InputProfileDB.json

@@ -0,0 +1,230 @@
+[
+    {
+        "DeviceName": [ "fallback_profile" ],
+        "DeviceType": 4,
+        "A_InputType": "0",
+        "A_Name": "a",
+        "A_Data": "0",
+        "A_ExtraData": "0",
+        "B_InputType": "0",
+        "B_Name": "x",
+        "B_Data": "2",
+        "B_ExtraData": "0",
+        "Start_InputType": "0",
+        "Start_Name": "start",
+        "Start_Data": "6",
+        "Start_ExtraData": "0",
+        "DpadUp_InputType": "0",
+        "DpadUp_Name": "dpup",
+        "DpadUp_Data": "11",
+        "DpadUp_ExtraData": "0",
+        "DpadDown_InputType": "0",
+        "DpadDown_Name": "dpdown",
+        "DpadDown_Data": "12",
+        "DpadDown_ExtraData": "0",
+        "DpadLeft_InputType": "0",
+        "DpadLeft_Name": "dpleft",
+        "DpadLeft_Data": "13",
+        "DpadLeft_ExtraData": "0",
+        "DpadRight_InputType": "0",
+        "DpadRight_Name": "dpright",
+        "DpadRight_Data": "14",
+        "DpadRight_ExtraData": "0",
+        "CButtonUp_InputType": "1",
+        "CButtonUp_Name": "righty-",
+        "CButtonUp_Data": "3",
+        "CButtonUp_ExtraData": "0",
+        "CButtonDown_InputType": "1",
+        "CButtonDown_Name": "righty+",
+        "CButtonDown_Data": "3",
+        "CButtonDown_ExtraData": "1",
+        "CButtonLeft_InputType": "1",
+        "CButtonLeft_Name": "rightx-",
+        "CButtonLeft_Data": "2",
+        "CButtonLeft_ExtraData": "0",
+        "CButtonRight_InputType": "1",
+        "CButtonRight_Name": "rightx+",
+        "CButtonRight_Data": "2",
+        "CButtonRight_ExtraData": "1",
+        "LeftTrigger_InputType": "0",
+        "LeftTrigger_Name": "leftshoulder",
+        "LeftTrigger_Data": "9",
+        "LeftTrigger_ExtraData": "0",
+        "RightTrigger_InputType": "0",
+        "RightTrigger_Name": "rightshoulder",
+        "RightTrigger_Data": "10",
+        "RightTrigger_ExtraData": "0",
+        "ZTrigger_InputType": "1",
+        "ZTrigger_Name": "lefttrigger+",
+        "ZTrigger_Data": "4",
+        "ZTrigger_ExtraData": "1",
+        "AnalogStickUp_InputType": "1",
+        "AnalogStickUp_Name": "lefty-",
+        "AnalogStickUp_Data": "1",
+        "AnalogStickUp_ExtraData": "0",
+        "AnalogStickDown_InputType": "1",
+        "AnalogStickDown_Name": "lefty+",
+        "AnalogStickDown_Data": "1",
+        "AnalogStickDown_ExtraData": "1",
+        "AnalogStickLeft_InputType": "1",
+        "AnalogStickLeft_Name": "leftx-",
+        "AnalogStickLeft_Data": "0",
+        "AnalogStickLeft_ExtraData": "0",
+        "AnalogStickRight_InputType": "1",
+        "AnalogStickRight_Name": "leftx+",
+        "AnalogStickRight_Data": "0",
+        "AnalogStickRight_ExtraData": "1"
+    },
+    {
+        "DeviceName": [ "Nintendo N64 Controller" ],
+        "DeviceType": 4,
+        "A_InputType": "0",
+        "A_Name": "a",
+        "A_Data": "0",
+        "A_ExtraData": "0",
+        "B_InputType": "0",
+        "B_Name": "b",
+        "B_Data": "1",
+        "B_ExtraData": "0",
+        "Start_InputType": "0",
+        "Start_Name": "start",
+        "Start_Data": "6",
+        "Start_ExtraData": "0",
+        "DpadUp_InputType": "0",
+        "DpadUp_Name": "dpup",
+        "DpadUp_Data": "11",
+        "DpadUp_ExtraData": "0",
+        "DpadDown_InputType": "0",
+        "DpadDown_Name": "dpdown",
+        "DpadDown_Data": "12",
+        "DpadDown_ExtraData": "0",
+        "DpadLeft_InputType": "0",
+        "DpadLeft_Name": "dpleft",
+        "DpadLeft_Data": "13",
+        "DpadLeft_ExtraData": "0",
+        "DpadRight_InputType": "0",
+        "DpadRight_Name": "dpright",
+        "DpadRight_Data": "14",
+        "DpadRight_ExtraData": "0",
+        "CButtonUp_InputType": "0",
+        "CButtonUp_Name": "y",
+        "CButtonUp_Data": "3",
+        "CButtonUp_ExtraData": "0",
+        "CButtonDown_InputType": "1",
+        "CButtonDown_Name": "righttrigger+",
+        "CButtonDown_Data": "5",
+        "CButtonDown_ExtraData": "1",
+        "CButtonLeft_InputType": "0",
+        "CButtonLeft_Name": "x",
+        "CButtonLeft_Data": "2",
+        "CButtonLeft_ExtraData": "0",
+        "CButtonRight_InputType": "0",
+        "CButtonRight_Name": "back",
+        "CButtonRight_Data": "4",
+        "CButtonRight_ExtraData": "0",
+        "LeftTrigger_InputType": "0",
+        "LeftTrigger_Name": "leftshoulder",
+        "LeftTrigger_Data": "9",
+        "LeftTrigger_ExtraData": "0",
+        "RightTrigger_InputType": "0",
+        "RightTrigger_Name": "rightshoulder",
+        "RightTrigger_Data": "10",
+        "RightTrigger_ExtraData": "0",
+        "ZTrigger_InputType": "1",
+        "ZTrigger_Name": "lefttrigger+",
+        "ZTrigger_Data": "4",
+        "ZTrigger_ExtraData": "1",
+        "AnalogStickUp_InputType": "1",
+        "AnalogStickUp_Name": "lefty-",
+        "AnalogStickUp_Data": "1",
+        "AnalogStickUp_ExtraData": "0",
+        "AnalogStickDown_InputType": "1",
+        "AnalogStickDown_Name": "lefty+",
+        "AnalogStickDown_Data": "1",
+        "AnalogStickDown_ExtraData": "1",
+        "AnalogStickLeft_InputType": "1",
+        "AnalogStickLeft_Name": "leftx-",
+        "AnalogStickLeft_Data": "0",
+        "AnalogStickLeft_ExtraData": "0",
+        "AnalogStickRight_InputType": "1",
+        "AnalogStickRight_Name": "leftx+",
+        "AnalogStickRight_Data": "0",
+        "AnalogStickRight_ExtraData": "1"
+    },
+	{
+        "DeviceName": [ "Nintendo GameCube Controller" ],
+        "DeviceType": 4,
+        "A_InputType": "0",
+        "A_Name": "a",
+        "A_Data": "0",
+        "A_ExtraData": "0",
+        "B_InputType": "0",
+        "B_Name": "b",
+        "B_Data": "1",
+        "B_ExtraData": "0",
+        "Start_InputType": "0",
+        "Start_Name": "start",
+        "Start_Data": "6",
+        "Start_ExtraData": "0",
+        "DpadUp_InputType": "0",
+        "DpadUp_Name": "dpup",
+        "DpadUp_Data": "11",
+        "DpadUp_ExtraData": "0",
+        "DpadDown_InputType": "0",
+        "DpadDown_Name": "dpdown",
+        "DpadDown_Data": "12",
+        "DpadDown_ExtraData": "0",
+        "DpadLeft_InputType": "0",
+        "DpadLeft_Name": "dpleft",
+        "DpadLeft_Data": "13",
+        "DpadLeft_ExtraData": "0",
+        "DpadRight_InputType": "0",
+        "DpadRight_Name": "dpright",
+        "DpadRight_Data": "14",
+        "DpadRight_ExtraData": "0",
+        "CButtonUp_InputType": "1;0",
+        "CButtonUp_Name": "righty-;y",
+        "CButtonUp_Data": "3;3",
+        "CButtonUp_ExtraData": "0;0",
+        "CButtonDown_InputType": "1",
+        "CButtonDown_Name": "righty+",
+        "CButtonDown_Data": "3",
+        "CButtonDown_ExtraData": "1",
+        "CButtonLeft_InputType": "1",
+        "CButtonLeft_Name": "rightx-",
+        "CButtonLeft_Data": "2",
+        "CButtonLeft_ExtraData": "0",
+        "CButtonRight_InputType": "1;0",
+        "CButtonRight_Name": "rightx+;x",
+        "CButtonRight_Data": "2;2",
+        "CButtonRight_ExtraData": "1;0",
+        "LeftTrigger_InputType": "0",
+        "LeftTrigger_Name": "rightshoulder",
+        "LeftTrigger_Data": "10",
+        "LeftTrigger_ExtraData": "0",
+        "RightTrigger_InputType": "1",
+        "RightTrigger_Name": "righttrigger+",
+        "RightTrigger_Data": "5",
+        "RightTrigger_ExtraData": "1",
+        "ZTrigger_InputType": "1",
+        "ZTrigger_Name": "lefttrigger+",
+        "ZTrigger_Data": "4",
+        "ZTrigger_ExtraData": "1",
+        "AnalogStickUp_InputType": "1",
+        "AnalogStickUp_Name": "lefty-",
+        "AnalogStickUp_Data": "1",
+        "AnalogStickUp_ExtraData": "0",
+        "AnalogStickDown_InputType": "1",
+        "AnalogStickDown_Name": "lefty+",
+        "AnalogStickDown_Data": "1",
+        "AnalogStickDown_ExtraData": "1",
+        "AnalogStickLeft_InputType": "1",
+        "AnalogStickLeft_Name": "leftx-",
+        "AnalogStickLeft_Data": "0",
+        "AnalogStickLeft_ExtraData": "0",
+        "AnalogStickRight_InputType": "1",
+        "AnalogStickRight_Name": "leftx+",
+        "AnalogStickRight_Data": "0",
+        "AnalogStickRight_ExtraData": "1"
+    }
+]

Package/AppImage/AppRun

@@ -0,0 +1,11 @@
+#!/usr/bin/env sh
+[ -f "$APPIMAGE".stylesheet ] && APPIMAGE_QT_THEME="$APPIMAGE.stylesheet"
+[ -f "$APPIMAGE_QT_THEME" ] && set -- "$@" "-stylesheet" "$APPIMAGE_QT_THEME"
+cur_dir="$(readlink -f "$(dirname "$0")")"
+
+exec "$cur_dir/bin/RMG" \
+		--lib-path="$cur_dir/shared/lib/RMG" \
+		--core-path="$cur_dir/shared/lib/RMG/Core" \
+		--plugin-path="$cur_dir/shared/lib/RMG/Plugin" \
+		--shared-data-path="$cur_dir/share/RMG" \
+		"$@"

Package/AppImage/Create.sh

@@ -0,0 +1,85 @@
+#!/usr/bin/env bash
+set -ex
+
+script_dir="$(dirname "$0")"
+toplvl_dir="$(realpath "$script_dir/../../")"
+bin_dir="$toplvl_dir/Bin/AppImage" # RMG should be installed here
+lib_dir="/usr/lib64"
+arch="$(uname -m)"
+
+
+XVFB_RUN="xvfb-run -a --"
+LIB4BIN_URL="https://raw.githubusercontent.com/VHSgunzo/sharun/refs/heads/main/lib4bin"
+APPIMAGETOOL_URL="https://github.com/AppImage/appimagetool/releases/download/continuous/appimagetool-$arch.AppImage"
+SHARUN_URL="https://github.com/VHSgunzo/sharun/releases/latest/download/sharun-$arch"
+
+export ARCH="$arch"
+export APPIMAGE_EXTRACT_AND_RUN=1
+export VERSION="$(git describe --tags --always)"
+export OUTPUT="$bin_dir/../RMG-Portable-Linux64-$VERSION.AppImage"
+export LD_LIBRARY_PATH="$toplvl_dir/Build/AppImage/Source/RMG-Core" # hack
+export SHARUN="$script_dir/sharun"
+
+if [[ ! -f "$script_dir/lib4bin" ]]
+then
+	curl -L "$LIB4BIN_URL" -o "$script_dir/lib4bin"
+	chmod +x "$script_dir/lib4bin"
+fi
+
+if [[ ! -f "$script_dir/appimagetool" ]]
+then
+	curl -L "$APPIMAGETOOL_URL" -o "$script_dir/appimagetool"
+	chmod +x "$script_dir/appimagetool"
+fi
+
+if [[ ! -f "$script_dir/sharun" ]]
+then
+	curl -L "$SHARUN_URL" -o "$script_dir/sharun"
+	chmod +x "$script_dir/sharun"
+fi
+
+if [[ "x$DISPLAY" != "x" ]]
+then
+	XVFB_RUN=""
+fi
+
+if [[ -d "/usr/lib/$arch-linux-gnu/" ]]
+then
+	lib_dir="/usr/lib/$arch-linux-gnu/"
+fi
+
+cp "$bin_dir/usr/share/applications/com.github.Rosalie241.RMG.desktop" "$bin_dir"
+cp "$bin_dir/usr/share/icons/hicolor/scalable/apps/com.github.Rosalie241.RMG.svg" "$bin_dir"
+ln -s com.github.Rosalie241.RMG.svg "$bin_dir"/.DirIcon
+mv "$bin_dir/usr/share" "$bin_dir/share"
+mv "$bin_dir/usr" "$bin_dir/shared"
+
+$XVFB_RUN "$script_dir/lib4bin" --dst-dir "$bin_dir" \
+	--hard-links --strip --with-hooks \
+	--strace-mode --with-sharun \
+	"$bin_dir/shared/bin/RMG" \
+	"$lib_dir"/libSDL* \
+	"$lib_dir"/libspeexdsp* \
+	"$lib_dir"/libhidapi-hidraw* \
+	"$lib_dir"/libGL* \
+	"$lib_dir"/libEGL* \
+	"$lib_dir"/libvulkan* \
+	"$lib_dir"/dri/* \
+	"$lib_dir"/libssl.so* \
+	"$lib_dir"/qt6/plugins/iconengines/* \
+	"$lib_dir"/qt6/plugins/imageformats/* \
+	"$lib_dir"/qt6/plugins/platforms/* \
+	"$lib_dir"/qt6/plugins/platformthemes/* \
+	"$lib_dir"/qt6/plugins/styles/* \
+	"$lib_dir"/qt6/plugins/xcbglintegrations/* \
+	"$lib_dir"/qt6/plugins/tls/* \
+	"$lib_dir"/qt6/plugins/wayland-*/*
+
+# Prepare sharun
+"$bin_dir/sharun" -g
+cp "$script_dir/AppRun" "$bin_dir"
+
+# make appimage
+"$script_dir/appimagetool" --comp zstd \
+	--mksquashfs-opt -Xcompression-level --mksquashfs-opt 22 \
+	-n "$bin_dir" "$OUTPUT"

Package/ArchLinux/PKGBUILD

@@ -1,46 +1,35 @@
 # Maintainer: Rosalie Wanders <rosalie@mailbox.org>
-_pkgname=rmg
-pkgname=${_pkgname}-git
-pkgver=git
+pkgname=rmg
+pkgver=0.8.8
 pkgrel=1
 pkgdesc="Rosalie's Mupen GUI"
-arch=('x86_64')
-url="https://github.com/Rosalie241/${_pkgname}"
-license=('GPLv3')
+arch=('x86_64' 'aarch64')
+url="https://github.com/Rosalie241/$pkgname"
+license=('GPL3')
 
-provides=("$_pkgname")
-conflicts=("$_pkgname")
+depends=("libusb" "hidapi" "libsamplerate" "speexdsp" "minizip" "sdl3" "zlib" "freetype2" "qt6-base" "qt6-svg" "qt6-websockets")
+makedepends=("git" "nasm" "cmake" "vulkan-headers")
 
-depends=("hidapi" "libsamplerate" "minizip" "sdl2" "zlib" "freetype2" "qt6-base" "qt6-svg" "xdg-user-dirs")
-makedepends=("git" "pkg-config" "nasm" "cmake" "cargo" "ninja")
-
-source=("git+https://github.com/Rosalie241/${_pkgname}.git")
+source=("git+https://github.com/Rosalie241/$pkgname.git#tag=v$pkgver")
 sha256sums=('SKIP')
 
-pkgver()
-{
-    cd "$_pkgname"
-
-    git describe --tags --always | sed -e 's|^v||;s|-|.|g'
-}
-
 prepare()
 {
-    mkdir -p "$srcdir/${_pkgname}/build"
+    mkdir -p "$srcdir/$pkgname/build"
 }
 
 build()
 {
-    cmake -S "$srcdir/${_pkgname}" -B "$srcdir/${_pkgname}/build" \
+    cmake -S "$srcdir/$pkgname" -B "$srcdir/$pkgname/build" \
                 -DCMAKE_BUILD_TYPE="Release" \
                 -DPORTABLE_INSTALL="OFF" \
                 -DCMAKE_INSTALL_PREFIX="/usr" \
-                -G "Ninja" \
+                -G "Unix Makefiles"
 
-    cmake --build "$srcdir/${_pkgname}/build"
+    cmake --build "$srcdir/$pkgname/build"
 }
 
 package()
 {
-    cmake --install "$srcdir/${_pkgname}/build" --prefix="$pkgdir/usr"
+    cmake --install "$srcdir/$pkgname/build" --prefix="$pkgdir/usr"
 }

Package/Fedora/RMG.spec

@@ -0,0 +1,65 @@
+Name:    RMG       
+Version: 0.8.8
+Release: %autorelease
+Summary: Rosalie's Mupen GUI 
+
+License: GPL-3.0-only       
+URL:     https://github.com/Rosalie241/RMG
+Source0: https://github.com/Rosalie241/RMG/archive/refs/tags/v%{version}.tar.gz       
+
+BuildRequires: gcc
+BuildRequires: g++
+BuildRequires: nasm
+BuildRequires: cmake
+BuildRequires: libusb1-devel
+BuildRequires: hidapi-devel
+BuildRequires: libsamplerate-devel
+BuildRequires: minizip-compat-devel
+BuildRequires: SDL3-devel
+BuildRequires: freetype-devel
+BuildRequires: mesa-libGL-devel
+BuildRequires: mesa-libGLU-devel
+BuildRequires: zlib-ng-devel
+BuildRequires: binutils-devel
+BuildRequires: speexdsp-devel
+BuildRequires: qt6-qtbase-devel
+BuildRequires: qt6-qtsvg-devel
+BuildRequires: qt6-qtwebsockets-devel
+BuildRequires: libxkbcommon-devel
+BuildRequires: libatomic
+
+Requires: libusb1
+Requires: hidapi
+Requires: SDL3
+Requires: zlib-ng
+Requires: libsamplerate
+Requires: speexdsp
+Requires: qt6-qtbase
+Requires: qt6-qtsvg
+Requires: qt6-qtwebsockets
+Requires: libatomic
+
+%description
+Rosalie's Mupen GUI is a free and open-source mupen64plus front-end written in C++
+
+%prep
+%autosetup
+
+%build
+%cmake -DCMAKE_BUILD_TYPE=RelWithDebInfo -DPORTABLE_INSTALL=OFF
+%cmake_build
+
+%install
+%cmake_install
+
+%files
+/usr/bin/RMG
+/usr/lib64/libRMG-Core.so
+/usr/lib64/RMG/
+/usr/share/RMG/
+/usr/share/applications/com.github.Rosalie241.RMG.desktop
+/usr/share/icons/hicolor/scalable/apps/com.github.Rosalie241.RMG.svg
+/usr/share/metainfo/com.github.Rosalie241.RMG.metainfo.xml
+
+%changelog
+%autochangelog

Package/com.github.Rosalie241.RMG.appdata.xml

@@ -1,262 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<component type="desktop">
-  <!--Created with jdAppdataEdit 2.1-->
-  <id>com.github.Rosalie241.RMG</id>
-  <name>Rosalie's Mupen GUI</name>
-  <summary>An easy to use &amp; cross-platform mupen64plus front-end written in C++ &amp; Qt</summary>
-  <developer_name>Rosalie</developer_name>
-  <launchable type="desktop-id">com.github.Rosalie241.RMG.desktop</launchable>
-  <metadata_license>CC0-1.0</metadata_license>
-  <project_license>GPL-3.0-only</project_license>
-  <description><p>Rosalie's Mupen GUI is an easy to use yet customizable mupen64plus front-end, allowing you to easily play N64 games.</p></description>
-  <screenshots>
-    <screenshot type="default">
-      <caption>The Rom Browser</caption>
-      <image type="source">https://github.com/Rosalie241/RMG/raw/master/Package/Screenshots/RomBrowser.png</image>
-    </screenshot>
-    <screenshot type="default">
-      <caption>During A Game</caption>
-      <image type="source">https://github.com/Rosalie241/RMG/raw/master/Package/Screenshots/InGame.png</image>
-    </screenshot>
-    <screenshot type="default">
-      <caption>Cheats</caption>
-      <image type="source">https://github.com/Rosalie241/RMG/raw/master/Package/Screenshots/Cheats.png</image>
-    </screenshot>
-    <screenshot type="default">
-      <caption>Settings</caption>
-      <image type="source">https://github.com/Rosalie241/RMG/raw/master/Package/Screenshots/Settings.png</image>
-    </screenshot>
-    <screenshot type="default">
-      <caption>Input Settings</caption>
-      <image type="source">https://github.com/Rosalie241/RMG/raw/master/Package/Screenshots/InputSettings.png</image>
-    </screenshot>
-  </screenshots>
-  <description/>
-  <releases>
-    <release version="v0.3.1" date="2023-02-04" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix taking a screenshot not working in some cases</li>
-          <li>Fix some games being unable to save due to having an illegal character in the save filename</li>
-          <li>Fix OSD tab crash in GLideN64</li>
-          <li>Fix an issue where the graphics plugin would show the 64DD IPL as ROM name in the settings even after booting a cartridge</li>
-          <li>Fix "Refresh ROM List" in Hotkeys tab in settings dialog not reverting back to defaults when clicking on 'restore defaults'</li>
-          <li>Fix "Remove Duplicate Keybindings" in settings dialog not behaving correctly in some cases</li>
-          <li>Fix fallback application icons not respecting system icon theme on linux</li>
-          <li>Add support for ndd/d64 files in zip files</li>
-          <li>Add support for using the basename of the ROM filename for covers</li>
-          <li>Add support for binding multiple inputs in RMG-Input</li>
-          <li>Improve behavior of window when launching RMG with a ROM using the commandline</li>
-          <li>Improve behavior of error message when emulation fails</li>
-          <li>Improve behavior of hotkey buttons in settings dialog</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.3.0" date="2023-01-23" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix GLideN64 not being able to load texture packs from relative paths</li>
-          <li>Fix "Save State Slot" keybindings not working in fullscreen</li>
-          <li>Fix deadzone percentage being incorrect when set to 0% in RMG-Input</li>
-          <li>Fix low deadzone value not working in RMG-Input (thank you porcino)</li>
-          <li>Fix toolbar being hidden when ending emulation while in fullscreen</li>
-          <li>Fix zip files with japanese characters in the file name not being able to be opened on windows</li>
-          <li>Fix ROM Browser not returning to a maximized state when ending emulation</li>
-          <li>Fix ROM Browser not opening maximized when closing RMG with it maximized</li>
-          <li>Fix window not being able to be maximized during emulation when scaling is enabled</li>
-          <li>Fix read-only ROM files not being able to be opened on linux</li>
-          <li>Remove "Allow Manual Window Resizing" setting due to it being always enabled</li>
-          <li>Remove Styles tab from settings dialog on windows</li>
-          <li>Add "Play Game with Cartridge" to context menu when a 64DD disk is selected in the ROM Browser</li>
-          <li>Add "Open ROM Directory" to context menu in the ROM Browser</li>
-          <li>Add an On-Screen Display (see the OSD tab in the settings dialog for settings)</li>
-          <li>Add Theme setting to settings dialog (see Interface -> Miscellaneous, this is a replacement for the previous Styles settings)</li>
-          <li>Improve error message when opening a zip file fails</li>
-          <li>Improve tab order and naming in settings dialog</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.9" date="2023-01-03" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix wrong 64DD Disk extension being listed in empty ROM browser</li>
-          <li>Fix memory corruption when having 64DD Disk files</li>
-          <li>Fix possible crash when render window wasn't visible yet</li>
-          <li>Fix RMG changing the current directory on non-portable installs</li>
-          <li>Remove Qt warning messages (you can view them by setting RMG_SHOW_DEBUG_QT_MESSAGES to 1)</li>
-          <li>Change "Choose ROM Directory" to "Change ROM Directory"</li>
-          <li>Add -q/--quit-after-emulation commandline option</li>
-          <li>Add 2 more icons to menubar menus/items</li>
-          <li>Add "Current Save State" tab to Hotkeys tab in settings dialog (this allows you to use a hotkey to change save state slots)</li>
-          <li>Improve behavior of Hotkeys tab in settings dialog</li>
-          <li>Improve behavior of window when exiting RMG while in-game</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.8" date="2023-01-01" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix 'Uniform Size (Grid View)' not being disabled during emulation</li>
-          <li>Fix toolbar not respecting the view setting</li>
-          <li>Fix being stuck at the loading screen when having more ROMs than the ROM search limit</li>
-          <li>Improve error message when opening a ROM fails</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.7" date="2022-12-29" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix core error not showing when the statusbar was hidden</li>
-          <li>Fix .ndd/.64d not being in the empty ROM Browser widget</li>
-          <li>Fix .jpg/.jpeg files not working on covers on Windows</li>
-          <li>Fix updater script not copying subdirectories on Windows (for portable installs)</li>
-          <li>Fix 64DD Disks which required the development IPL not working</li>
-          <li>Fix 64DD Disks showing the wrong internal ROM name (this fix requires clearing the ROM cache)</li>
-          <li>Fix cover filenames allowing invalid characters (they will now be replaced by _)</li>
-          <li>Add more icons to View menu in the menu bar</li>
-          <li>Add 'Uniform Size (Grid View)' to View menu in the menu bar</li>
-          <li>Add smooth scrolling to List View and Grid View</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.6" date="2022-12-28" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix default save state/game directory being incorrect on first run (on non-portable installs)</li>
-          <li>Fix angrylion-rdp-plus not loading settings correctly</li>
-          <li>Fix cheat settings not moving over when renaming a cheat</li>
-          <li>Remove fullscreen resolution combobox from GLideN64 because it did nothing</li>
-          <li>Remove File menu from menu bar</li>
-          <li>Implement disk support without requiring a cartridge</li>
-          <li>Add toolbar</li>
-          <li>Add View menu to menu bar</li>
-          <li>Add Grid view to ROM browser</li>
-          <li>Add icons to all menu bar items</li>
-          <li>Add log dialog</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.5" date="2022-12-14" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix incorrect controller being selected in RMG-Input when having 2 controllers with the same name</li>
-          <li>Fix some UI elements being enabled while the 'Controller Is Plugged In' checkbox is disabled in RMG-Input</li>
-          <li>Fix extra padding being added when having a controller selected and opening RMG-Input</li>
-          <li>Fix creating a new profile in GLideN64</li>
-          <li>Add Z-Trigger visualization in RMG-Input</li>
-          <li>Remove Debugger checkbox in the settings dialog because it did nothing</li>
-          <li>Remove About buttons in the plugin tab of the settings dialog because it did nothing</li>
-          <li>Implement close button on all dialogs</li>
-          <li>Implement custom style support (for Windows only)</li>
-          <li>Implement the ability to remove/reset the main profile in RMG-Input</li>
-          <li>Rename Interface tab in settings dialog to User Interface</li>
-          <li>Migrate to Qt6 (currently the flatpak will remain Qt5)</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.4" date="2022-12-08" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix Discord Rich Presence breaking when opening the settings dialog</li>
-          <li>Fix install update window not showing</li>
-          <li>Fix 'Limit FPS' not working with new RMG-Audio (this disables the 'synchronize audio' option)</li>
-          <li>Implement support for Japanese characters in the ROM header</li>
-          <li>Implement dynamic buffer sizes in the ROM browser cache (this reduces the ROM browser cache size)</li>
-          <li>Add more cheats from Gent</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.3" date="2022-12-05" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Add updater for portable installations</li>
-          <li>Add Discord Rich Presence</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.2" date="2022-12-03" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix trivial resampler not being available in RMG-Audio</li>
-          <li>Fix save games/states showing up in multiple patched ROMs based on the same game</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.1" date="2022-12-02" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Improve cheat error handling</li>
-          <li>Improve cheat dialog slightly (ok button is now disabled by default)</li>
-          <li>Improve RMG-Audio by using mupen64plus-audio-sdl as base</li>
-          <li>Add iQue cheats from Gent</li>
-          <li>Add CRLF support in cheat files</li>
-          <li>Add 'Remove Duplicate Keybindings' in settings dialog</li>
-          <li>Change maximum ROM browser cache items to 10000</li>
-          <li>Change default ROM browser limit to 250</li>
-          <li>Fix cheat settings being gone after opening the settings dialog in-game</li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.2.0" date="2022-11-29" type="stable">
-      <description>
-        <p>Changes:</p>
-        <ul>
-          <li>Fix out of bounds read in ROM browser cache</li>
-          <li>Fix --fullscreen not working like expected</li>
-          <li>Fix crash on windows when exiting</li>
-          <li>Implement octagon simulation in RMG-Input (thank you Jaxon)</li>
-          <li>implement cheat support</li>
-          <li>Add 'Invert Axis Mapped To LRZ' option to RMG-Input</li>
-          <li>Add --disk commandline argument (for opening N64 ROMs with 64DD disk files)</li>
-          <li>Add configuration GUI to angrylion-rdp-plus (thank you GhostlyDark)</li>
-          <li>Remove range setting from RMG-Input </li>
-        </ul>
-      </description>
-    </release>
-    <release version="v0.1.9" date="2022-11-19" type="stable"/>
-    <release version="v0.1.8" date="2022-11-17" type="stable"/>
-    <release version="v0.1.7" date="2022-11-14" type="stable"/>
-    <release version="v0.1.6" date="2022-09-12" type="stable"/>
-    <release version="v0.1.5" date="2022-09-10" type="stable"/>
-    <release version="v0.1.4" date="2022-03-13" type="stable"/>
-    <release version="v0.1.3" date="2022-02-14" type="stable"/>
-    <release version="v0.1.2" date="2022-01-21" type="stable"/>
-    <release version="v0.1.1" date="2022-01-19" type="stable"/>
-    <release version="v0.1.0" date="2022-01-07" type="stable"/>
-    <release version="v0.0.9" date="2021-12-25" type="stable"/>
-    <release version="v0.0.8" date="2021-12-24" type="stable"/>
-    <release version="v0.0.7" date="2021-12-23" type="stable"/>
-    <release version="v0.0.6" date="2021-10-18" type="stable"/>
-    <release version="v0.0.5" date="2021-10-17" type="stable"/>
-    <release version="v0.0.4" date="2021-10-06" type="stable"/>
-    <release version="v0.0.3" date="2021-10-04" type="stable"/>
-    <release version="v0.0.2" date="2021-09-26" type="stable"/>
-  </releases>
-  <url type="homepage">https://github.com/Rosalie241/RMG</url>
-  <url type="bugtracker">https://github.com/Rosalie241/RMG/issues</url>
-  <categories>
-    <category>Game</category>
-    <category>Emulator</category>
-    <category>Qt</category>
-  </categories>
-  <recommends>
-    <control>pointing</control>
-    <control>keyboard</control>
-  </recommends>
-  <content_rating type="oars-1.1"/>
-  <keywords>
-    <keyword>mupen64plus</keyword>
-    <keyword>RMG</keyword>
-  </keywords>
-</component>

Package/com.github.Rosalie241.RMG.desktop

@@ -1,9 +1,11 @@
 [Desktop Entry]
 Type=Application
 Name=Rosalie's Mupen GUI
-Comment=An easy to use & cross-platform mupen64plus front-end written in C++ & Qt
+Comment=An easy to use & cross-platform mupen64plus front-end written in C++ & Qt
 Exec=RMG %f
+TryExec=RMG
 Icon=com.github.Rosalie241.RMG
 Terminal=false
 Categories=Game;Emulator;Qt;
 MimeType=application/x-n64-rom;
+Keywords=emulator;mupen64plus;n64;RMG

README.md

@@ -1,12 +1,26 @@
 # Rosalie's Mupen GUI
 
-Rosalie's Mupen GUI is a free and open-source mupen64plus GUI written in C++.
+Rosalie's Mupen GUI is a free and open-source mupen64plus front-end written in C++.
 
 It offers a simple-to-use user interface.
 
+## Download
+
+#### Windows
+You can download Rosalie's Mupen GUI on ![Github Releases](https://github.com/Rosalie241/RMG/releases)
+
+#### Linux
+You can download Rosalie's Mupen GUI on 
+* [Github Releases (AppImage)](https://github.com/Rosalie241/RMG/releases)
+* [Flathub (Flatpak)](https://flathub.org/apps/details/com.github.Rosalie241.RMG)
+* [Arch User Repository](https://aur.archlinux.org/packages/rmg)
+* [Fedora COPR](https://copr.fedorainfracloud.org/coprs/rosalie/RMG/)
+
 ## Support
 
-Join the [Rosalie's Mupen GUI Discord Server](https://discord.gg/k9GuyJ2PpF) for support
+You can ask for help or report issues on
+* [Github](https://github.com/Rosalie241/RMG/issues/new)
+* [Discord](https://discord.gg/k9GuyJ2PpF)
 
 ## License
 
@@ -24,13 +38,25 @@ Rosalie's Mupen GUI is licensed under the [GNU General Public License v3.0](http
 * Portable Debian/Ubuntu
 
   ```bash
-  sudo apt-get -y install cmake libhidapi-dev libsamplerate0-dev libspeex-dev libminizip-dev libsdl2-dev libfreetype6-dev libgl1-mesa-dev libglu1-mesa-dev pkg-config zlib1g-dev binutils-dev libspeexdsp-dev qt6-base-dev libqt6svg6-dev build-essential nasm git zip ninja-build
+  sudo apt-get -y install cmake libusb-1.0-0-dev libhidapi-dev libsamplerate0-dev libspeex-dev libminizip-dev libsdl3-dev libfreetype6-dev libgl1-mesa-dev libglu1-mesa-dev pkg-config zlib1g-dev binutils-dev libspeexdsp-dev qt6-base-dev qt6-websockets-dev libqt6svg6-dev libvulkan-dev build-essential nasm git zip ninja-build
   ./Source/Script/Build.sh Release
   ```
   
 * Portable Fedora
   ```bash
-  sudo dnf install hidapi-devel libsamplerate-devel minizip-compat-devel SDL2-devel freetype-devel mesa-libGL-devel mesa-libGLU-devel zlib-ng-devel binutils-devel speexdsp-devel qt6-qtbase-devel qt6-qtsvg-devel gcc-c++ nasm git ninja-build
+  sudo dnf install libusb1-devel hidapi-devel libsamplerate-devel minizip-compat-devel SDL3-devel freetype-devel mesa-libGL-devel mesa-libGLU-devel pkgconfig zlib-ng-devel binutils-devel speexdsp-devel qt6-qtbase-devel qt6-qtsvg-devel qt6-qtwebsockets-devel vulkan-devel gcc-c++ nasm git ninja-build
+  ./Source/Script/Build.sh Release
+  ```
+
+* Portable Arch Linux
+  ```bash
+  sudo pacman -S --needed make cmake gcc libusb hidapi freetype2 libpng qt6 sdl3 libsamplerate nasm minizip pkgconf vulkan-headers git
+  ./Source/Script/Build.sh Release
+  ```
+
+* Portable OpenSUSE Tumbleweed
+  ```bash
+  sudo zypper install SDL3-devel cmake freetype2-devel gcc gcc-c++ libusb-1_0-devel libhidapi-devel libhidapi-hidraw0 libpng16-devel libsamplerate-devel make nasm ninja pkgconf-pkg-config speex-devel vulkan-devel zlib-devel qt6-tools-devel qt6-opengl-devel qt6-widgets-devel qt6-svg-devel minizip-devel git
   ./Source/Script/Build.sh Release
   ```
 
@@ -47,9 +73,9 @@ cmake --install "$build_dir" --prefix="/usr"
 ```
 
 #### Windows
-* Download & Install [MSYS2](https://www.msys2.org/)
+* Download & Install [MSYS2](https://www.msys2.org/) (UCRT64)
 ```bash
-pacman -S --needed make mingw-w64-x86_64-cmake mingw-w64-x86_64-gcc mingw-w64-x86_64-hidapi mingw-w64-x86_64-freetype mingw-w64-x86_64-libpng mingw-w64-x86_64-SDL2 mingw-w64-x86_64-qt6 mingw-w64-x86_64-SDL2 mingw-w64-x86_64-hidapi mingw-w64-x86_64-speexdsp mingw-w64-x86_64-libsamplerate mingw-w64-x86_64-nasm mingw-w64-x86_64-minizip git
+pacman -S --needed make mingw-w64-ucrt-x86_64-cmake mingw-w64-ucrt-x86_64-gcc mingw-w64-ucrt-x86_64-libusb mingw-w64-ucrt-x86_64-hidapi mingw-w64-ucrt-x86_64-freetype mingw-w64-ucrt-x86_64-libpng mingw-w64-ucrt-x86_64-qt6 mingw-w64-ucrt-x86_64-sdl3 mingw-w64-ucrt-x86_64-speexdsp mingw-w64-ucrt-x86_64-libsamplerate mingw-w64-ucrt-x86_64-libusb mingw-w64-ucrt-x86_64-nasm mingw-w64-ucrt-x86_64-minizip mingw-w64-ucrt-x86_64-vulkan-headers git
 ./Source/Script/Build.sh Release
 ```
 

Source/3rdParty/CMakeLists.txt

@@ -3,17 +3,9 @@
 #
 include(ExternalProject)
 
-set(THIRDPARTY_DIR ${CMAKE_BINARY_DIR}/Source/3rdParty)
+set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 
-find_program(RUST_CARGO cargo)
-if(${RUST_CARGO} STREQUAL "RUST_CARGO-NOTFOUND")
-    message(WARNING "mupen64plus-input-gca will not be built due to not having cargo installed")
-    set(BUILD_INPUT_GCA OFF)
-else()
-    set(BUILD_INPUT_GCA ON)
-endif()
-
-set(M64P_CORE_DIR ${THIRDPARTY_DIR}/mupen64plus-core)
+set(M64P_CORE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-core)
 if(WIN32)
     set(SO_EXT "dll")
     set(GCA_LIB "mupen64plus_input_gca.${SO_EXT}")
@@ -24,7 +16,9 @@ else(WIN32)
     set(CORE_FILE "libmupen64plus.so")
 endif(WIN32)
 
-set(BASE_CMAKE_CONFIGURE_ARGS -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE} -DCMAKE_C_COMPILER=${CMAKE_C_COMPILER} -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER})
+set(BASE_CMAKE_CONFIGURE_ARGS -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE} 
+    -DCMAKE_C_COMPILER=${CMAKE_C_COMPILER} -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}
+    -DCMAKE_C_FLAGS=${CMAKE_C_FLAGS} -DCMAKE_CXX_FLAGS=${CMAKE_CXX_FLAGS})
 if (USE_CCACHE)
     set(CMAKE_CONFIGURE_ARGS ${BASE_CMAKE_CONFIGURE_ARGS} -DCMAKE_CXX_COMPILER_LAUNCHER=ccache -DCMAKE_C_COMPILER_LAUNCHER=ccache)
     set(MAKE_CC_COMPILER "ccache ${CMAKE_C_COMPILER}")
@@ -35,227 +29,199 @@ else(USE_CCACHE)
     set(MAKE_CXX_COMPILER "${CMAKE_CXX_COMPILER}")
 endif(USE_CCACHE)
 
-if(NOT NO_GIT_CLONE)
-    set(MUPEN64PLUSCORE_URL           "https://github.com/Rosalie241/mupen64plus-core")
-    set(MUPEN64PLUSCORE_TAG           "fc8edd980a844d11fde64c719591090d09185264")
-    
-    set(MUPEN64PLUS_RSP_CXD4_URL      "https://github.com/mupen64plus/mupen64plus-rsp-cxd4")
-    set(MUPEN64PLUS_RSP_CXD4_TAG      "39f79201baa15890c4cbae92f2215a634cc3ee6d")
-    
-    set(MUPEN64PLUS_RSP_HLE_URL       "https://github.com/mupen64plus/mupen64plus-rsp-hle")
-    set(MUPEN64PLUS_RSP_HLE_TAG       "88093cb43499eff53d343653cddcae2132af17ef")
-    
-    set(MUPEN64PLUS_RSP_PARALLEL_URL  "https://github.com/Rosalie241/parallel-rsp")
-    set(MUPEN64PLUS_RSP_PARALLEL_TAG  "e67cee3131651c3e48343294d94fa68a6f8ec14c")
-    
-    set(MUPEN64PLUS_INPUT_RAPHNET_URL "https://github.com/raphnet/mupen64plus-input-raphnetraw")
-    set(MUPEN64PLUS_INPUT_RAPHNET_TAG "86112413e98a8648edb11d199673cc24d5799af8")
-	
-    set(MUPEN64PLUS_INPUT_GCA_URL     "https://github.com/amatho/mupen64plus-input-gca")
-    set(MUPEN64PLUS_INPUT_GCA_TAG     "21639fb13dfa797a7c0949ffd9bbda9a3456fc69")
+# use sub-make when available
+if ("${CMAKE_GENERATOR}" STREQUAL "Unix Makefiles" OR
+    "${CMAKE_GENERATOR}" STREQUAL "MSYS Makefiles")
+    set(MAKE_CMD "$(MAKE)")
+else()
+    set(MAKE_CMD "make")
+endif()
 
-    set(MUPEN64PLUS_GFX_ANGRYLION_URL "https://github.com/Rosalie241/angrylion-rdp-plus")
-    set(MUPEN64PLUS_GFX_ANGRYLION_TAG "158e74d4ec1c818289cd19c3a05e498c3ceff758")
+if ("${CMAKE_C_FLAGS}" STREQUAL "")
+    set(MAKE_OPTFLAGS "-O3")
+else()
+    set(MAKE_OPTFLAGS "${CMAKE_C_FLAGS}")
+endif()
 
-    set(MUPEN64PLUS_GFX_GLIDEN64_URL  "https://github.com/gonetz/GLideN64")
-    set(MUPEN64PLUS_GFX_GLIDEN64_TAG  "263a7bd2ca81759ece98209bd282a6c1173a129f")
+if ("${CMAKE_BUILD_TYPE}" STREQUAL "RelWithDebInfo")
+    set(MAKE_DEBUG "0")
+    set(MAKE_OPTFLAGS "${MAKE_OPTFLAGS} -g")
+elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "Debug")
+    set(MAKE_DEBUG "1")
+else()
+    set(MAKE_DEBUG "0")
+endif()
 
-    set(MUPEN64PLUS_GFX_PARALLEL_URL  "https://github.com/Rosalie241/parallel-rdp-standalone")
-    set(MUPEN64PLUS_GFX_PARALLEL_TAG  "48abaa5e082add7848e6f98648111c69c4a71632")
-
-    set(DISCORD_RPC_URL               "https://github.com/discord/discord-rpc")
-    set(DISCORD_RPC_TAG               "963aa9f3e5ce81a4682c6ca3d136cddda614db33")
-
-    set(IMGUI_URL                     "https://github.com/ocornut/imgui")
-    set(IMGUI_TAG                     "d7c8516a4b848c0291e3d75b627c0843f515f591")
-endif(NOT NO_GIT_CLONE)
+# TODO: when SDL3_net has made a release,
+# remove the vendored SDL3_net
+set(SDL3NET_DIR ${CMAKE_CURRENT_SOURCE_DIR}/SDL_net)
+set(SDL3NET_SOURCES
+    ${SDL3NET_DIR}/src/SDL_net.c
+)
+find_package(PkgConfig REQUIRED)
+pkg_check_modules(SDL3 REQUIRED sdl3)
+add_library(SDL3_net STATIC ${SDL3NET_SOURCES})
+target_include_directories(SDL3_net PRIVATE ${SDL3NET_DIR}/include)
+set(SDL3NET_CFLAGS "-DUSE_SDL3NET -I${SDL3NET_DIR}/include")
+# for some reason MingW needs SDL3 to be linked after SDL3_net,
+# else we get a lot of missing symbol errors, should be harmless
+# on other platforms
+set(SDL3NET_LDLIBS "$<TARGET_FILE:SDL3_net> -l${SDL3_LIBRARIES}")
+if (WIN32)
+    set(SDL3NET_LDLIBS "${SDL3NET_LDLIBS} -liphlpapi -lws2_32")
+endif (WIN32)
 
 ExternalProject_Add(mupen64plus-core
-    SOURCE_DIR mupen64plus-core/
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-core/
 
     CONFIGURE_COMMAND ""
     INSTALL_COMMAND ""
 
-    GIT_REPOSITORY ${MUPEN64PLUSCORE_URL}
-    GIT_TAG ${MUPEN64PLUSCORE_TAG}
-
-    BUILD_COMMAND make all OSD=0 NEW_DYNAREC=1 TARGET=${CORE_FILE} DEBUG=$<CONFIG:Debug> KEYBINDINGS=0 CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+    BUILD_COMMAND ${MAKE_CMD} all -f ${M64P_CORE_DIR}/projects/unix/Makefile 
+        SRCDIR=${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-core/src 
+        SUBDIR=${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-core/subprojects 
+        OSD=0 NEW_DYNAREC=1 NO_ASM=$<BOOL:${NO_ASM}> 
+        KEYBINDINGS=0 ACCURATE_FPU=1 VULKAN=0 NETPLAY=$<BOOL:${NETPLAY}> 
+        TARGET=${CORE_FILE} DEBUG=${MAKE_DEBUG}
+        CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+        OPTFLAGS=${MAKE_OPTFLAGS}
+        # TODO: when SDL3_net has made a release,
+        # remove the vendored SDL3_net
+        SDLNET_CFLAGS=${SDL3NET_CFLAGS} SDLNET_LDLIBS=${SDL3NET_LDLIBS}
     BUILD_IN_SOURCE False
+    BUILD_ALWAYS True
+    BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-core
 
-    BINARY_DIR ${M64P_CORE_DIR}/projects/unix
-    
-    BUILD_BYPRODUCTS ${M64P_CORE_DIR}/projects/unix/${CORE_FILE}
+    BUILD_BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-core/${CORE_FILE}
+    DEPENDS SDL3_net
 )
 
-set(APIDIR "${CMAKE_BINARY_DIR}/Source/3rdParty/mupen64plus-core/src/api")
+set(APIDIR "${CMAKE_SOURCE_DIR}/Source/3rdParty/mupen64plus-core/src/api")
 
 ExternalProject_Add(mupen64plus-rsp-cxd4
-    SOURCE_DIR mupen64plus-rsp-cxd4/
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-rsp-cxd4/
 
     CONFIGURE_COMMAND ""
     INSTALL_COMMAND ""
 
-    GIT_REPOSITORY ${MUPEN64PLUS_RSP_CXD4_URL}
-    GIT_TAG ${MUPEN64PLUS_RSP_CXD4_TAG}
-
-    BUILD_COMMAND make all APIDIR=${APIDIR} DEBUG=$<CONFIG:Debug> POSTFIX= CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+    BUILD_COMMAND ${MAKE_CMD} all -f ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-rsp-cxd4/projects/unix/Makefile
+        SRCDIR=${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-rsp-cxd4
+        APIDIR=${APIDIR} DEBUG=${MAKE_DEBUG} POSTFIX= 
+        CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+        OPTFLAGS=${MAKE_OPTFLAGS}
     BUILD_IN_SOURCE False
+    BUILD_ALWAYS True
+    BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-rsp-cxd4
 
-    BINARY_DIR ${THIRDPARTY_DIR}/mupen64plus-rsp-cxd4/projects/unix
-    
-    BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/mupen64plus-rsp-cxd4/projects/unix/mupen64plus-rsp-cxd4.${SO_EXT}
-    DEPENDS mupen64plus-core
+    BUILD_BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-rsp-cxd4/mupen64plus-rsp-cxd4.${SO_EXT}
 )
 
 ExternalProject_Add(mupen64plus-rsp-hle
-    SOURCE_DIR mupen64plus-rsp-hle/
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-rsp-hle/
 
     CONFIGURE_COMMAND ""
     INSTALL_COMMAND ""
 
-    GIT_REPOSITORY ${MUPEN64PLUS_RSP_HLE_URL}
-    GIT_TAG ${MUPEN64PLUS_RSP_HLE_TAG}
-
-    BUILD_COMMAND make all APIDIR=${APIDIR} DEBUG=$<CONFIG:Debug> CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+    BUILD_COMMAND ${MAKE_CMD} all -f ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-rsp-hle/projects/unix/Makefile
+        SRCDIR=${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-rsp-hle/src
+        APIDIR=${APIDIR} DEBUG=${MAKE_DEBUG}
+        CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+        OPTFLAGS=${MAKE_OPTFLAGS}
     BUILD_IN_SOURCE False
+    BUILD_ALWAYS True
+    BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-rsp-hle
 
-    BINARY_DIR ${THIRDPARTY_DIR}/mupen64plus-rsp-hle/projects/unix
-    
-    BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/mupen64plus-rsp-hle/projects/unix/mupen64plus-rsp-hle.${SO_EXT}
-    DEPENDS mupen64plus-core
+    BUILD_BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-rsp-hle/mupen64plus-rsp-hle.${SO_EXT}
 )
 
 ExternalProject_Add(mupen64plus-rsp-parallel
-    SOURCE_DIR mupen64plus-rsp-parallel
-
-    GIT_REPOSITORY ${MUPEN64PLUS_RSP_PARALLEL_URL}
-    GIT_TAG ${MUPEN64PLUS_RSP_PARALLEL_TAG}
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-rsp-parallel/
 
     INSTALL_COMMAND ""
 
-    BUILD_IN_SOURCE True
-    CMAKE_ARGS ${CMAKE_CONFIGURE_ARGS}
+    BUILD_IN_SOURCE False
+    BUILD_ALWAYS True
+    CMAKE_ARGS -DUSE_IPO=OFF ${CMAKE_CONFIGURE_ARGS}
+    BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-rsp-parallel
 
-    BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/mupen64plus-rsp-parallel/mupen64plus-rsp-parallel.${SO_EXT}
-    DEPENDS mupen64plus-core
+    BUILD_BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-rsp-parallel/mupen64plus-rsp-parallel.${SO_EXT}
 )
 
 ExternalProject_Add(mupen64plus-input-raphnetraw
-    SOURCE_DIR mupen64plus-input-raphnetraw/
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-input-raphnetraw/
 
     CONFIGURE_COMMAND ""
     INSTALL_COMMAND ""
 
-    GIT_REPOSITORY ${MUPEN64PLUS_INPUT_RAPHNET_URL}
-    GIT_TAG ${MUPEN64PLUS_INPUT_RAPHNET_TAG}
-
-    BUILD_COMMAND make all APIDIR=${APIDIR} DEBUG=$<CONFIG:Debug> CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+    BUILD_COMMAND ${MAKE_CMD} all -f ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-input-raphnetraw/projects/unix/Makefile
+        SRCDIR=${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-input-raphnetraw/src
+        APIDIR=${APIDIR} DEBUG=${MAKE_DEBUG}
+        CC=${MAKE_CC_COMPILER} CXX=${MAKE_CXX_COMPILER}
+        OPTFLAGS=${MAKE_OPTFLAGS}
     BUILD_IN_SOURCE False
+    BUILD_ALWAYS True
+    BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-input-raphnetraw
 
-    BINARY_DIR ${THIRDPARTY_DIR}/mupen64plus-input-raphnetraw/projects/unix
-    
-    BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/mupen64plus-input-raphnetraw/projects/unix/mupen64plus-input-raphnetraw.${SO_EXT}
-    DEPENDS mupen64plus-core
+    BUILD_BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-input-raphnetraw/mupen64plus-input-raphnetraw.${SO_EXT}
 )
 
-if (BUILD_INPUT_GCA)
-    ExternalProject_Add(mupen64plus-input-gca
-        SOURCE_DIR mupen64plus-input-gca/
+set(GLIDEN64_DIR "${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-video-GLideN64")
+set(GLIDEN64_BUILD_DIR "${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-video-GLideN64")
+set(GLIDEN64_CUSTOM_INI "${GLIDEN64_DIR}/ini/GLideN64.custom.ini")
+# taken from GLideN64's CMakeLists.txt
+if("${CMAKE_BUILD_TYPE}" STREQUAL "Release" OR
+    "${CMAKE_BUILD_TYPE}" STREQUAL "MinSizeRel" OR
+    "${CMAKE_BUILD_TYPE}" STREQUAL "RelWithDebInfo")
+    set(GLIDEN64_BUILD_TYPE Release)
+elseif("${CMAKE_BUILD_TYPE}" STREQUAL "Debug")
+    set(GLIDEN64_BUILD_TYPE Debug)
+endif()
+
+if (USE_ANGRYLION)
+    ExternalProject_Add(mupen64plus-video-angrylion-plus
+        SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-video-angrylion-plus
 
-        CONFIGURE_COMMAND ""
         INSTALL_COMMAND ""
 
-        GIT_REPOSITORY ${MUPEN64PLUS_INPUT_GCA_URL}
-        GIT_TAG ${MUPEN64PLUS_INPUT_GCA_TAG}
+        BUILD_IN_SOURCE False
+        BUILD_ALWAYS True
+        CMAKE_ARGS -DBUILD_MUPEN64PLUS=ON -DBUILD_PROJECT64=OFF -DUSE_QT5=OFF -DUSE_IPO=OFF ${CMAKE_CONFIGURE_ARGS}
+        BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-video-angrylion-plus
 
-        BUILD_COMMAND cargo build --release --features "m64p_compat"
-        BUILD_IN_SOURCE True
-
-        BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/mupen64plus-input-gca/target/release/${GCA_LIB}
-        DEPENDS mupen64plus-core
+        BUILD_BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-video-angrylion-plus/mupen64plus-video-angrylion-plus.${SO_EXT}
     )
-endif(BUILD_INPUT_GCA)
-
-set(GLIDEN64_DIR "${THIRDPARTY_DIR}/mupen64plus-video-GLideN64")
-set(GLIDEN64_BUILD_DIR "${GLIDEN64_DIR}/projects/cmake")
-set(GLIDEN64_CUSTOM_INI "${GLIDEN64_DIR}/ini/GLideN64.custom.ini")
-if (WIN32)
-	set(GLIDEN64_LIB "${GLIDEN64_BUILD_DIR}/mupen64plus-video-GLideN64.${SO_EXT}")
-else(WIN32)
-	set(GLIDEN64_LIB "${GLIDEN64_BUILD_DIR}/plugin/${CMAKE_BUILD_TYPE}/mupen64plus-video-GLideN64.${SO_EXT}")
-endif(WIN32)
-
-set(GLIDENUI_TRANSLATIONS_LANGS "de;es;fr;it;ja;pl;pt_BR")
-foreach(LANG ${GLIDENUI_TRANSLATIONS_LANGS})
-    list(APPEND GLIDENUI_TRANSLATIONS "${GLIDEN64_DIR}/translations/release/gliden64_${LANG}.qm")
-endforeach()
-
-ExternalProject_Add(mupen64plus-video-angrylion-plus
-    SOURCE_DIR mupen64plus-video-angrylion-plus
-
-    GIT_REPOSITORY ${MUPEN64PLUS_GFX_ANGRYLION_URL}
-    GIT_TAG ${MUPEN64PLUS_GFX_ANGRYLION_TAG}
-
-    INSTALL_COMMAND ""
-
-    BUILD_IN_SOURCE True
-    CMAKE_ARGS -DBUILD_MUPEN64PLUS=ON -DBUILD_PROJECT64=OFF -DUSE_QT5=OFF ${CMAKE_CONFIGURE_ARGS}
-
-    BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/mupen64plus-video-angrylion-plus/mupen64plus-video-angrylion-plus.${SO_EXT}
-    DEPENDS mupen64plus-core
-)
+endif(USE_ANGRYLION)
 
 ExternalProject_Add(mupen64plus-video-GLideN64
-    SOURCE_DIR mupen64plus-video-GLideN64
-
-    GIT_REPOSITORY ${MUPEN64PLUS_GFX_GLIDEN64_URL}
-    GIT_TAG ${MUPEN64PLUS_GFX_GLIDEN64_TAG}
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-video-GLideN64
 
     INSTALL_COMMAND ""
 
     BUILD_IN_SOURCE False
-    CMAKE_ARGS -DMUPENPLUSAPI=ON -DMUPENPLUSAPI_GLIDENUI=ON -DGLIDENUI_QT6=ON -DUSE_SYSTEM_LIBS=ON ${CMAKE_CONFIGURE_ARGS}
+    BUILD_ALWAYS True
+    CMAKE_ARGS -DMUPENPLUSAPI=ON -DMUPENPLUSAPI_GLIDENUI=ON -DGLIDENUI_QT6=ON -DUSE_IPO=OFF -DUSE_SYSTEM_LIBS=ON ${CMAKE_CONFIGURE_ARGS}
 
     SOURCE_SUBDIR ./src/
-    BINARY_DIR ${GLIDEN64_BUILD_DIR}
+    BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-video-GLideN64
 
-    BUILD_BYPRODUCTS ${GLIDEN64_LIB}
+    BUILD_BYPRODUCTS ${GLIDEN64_BUILD_DIR}/plugin/${GLIDEN64_BUILD_TYPE}/mupen64plus-video-GLideN64.${SO_EXT}
 )
 
 ExternalProject_Add(mupen64plus-video-parallel
-    SOURCE_DIR mupen64plus-video-parallel
-
-    GIT_REPOSITORY ${MUPEN64PLUS_GFX_PARALLEL_URL}
-    GIT_TAG ${MUPEN64PLUS_GFX_PARALLEL_TAG}
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/mupen64plus-video-parallel
 
     INSTALL_COMMAND ""
 
-    BUILD_IN_SOURCE True
-    CMAKE_ARGS -DUSE_QT5=OFF ${CMAKE_CONFIGURE_ARGS}
+    BUILD_IN_SOURCE False
+    BUILD_ALWAYS True
+    CMAKE_ARGS -DCONFIG_GUI=ON -DUSE_IPO=OFF ${CMAKE_CONFIGURE_ARGS}
+    BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-video-parallel
 
-    BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/mupen64plus-video-parallel/mupen64plus-video-parallel.${SO_EXT}
-    DEPENDS mupen64plus-core
+    BUILD_BYPRODUCTS ${CMAKE_CURRENT_BINARY_DIR}/mupen64plus-video-parallel/mupen64plus-video-parallel.${SO_EXT}
 )
 
-if (DISCORD_RPC)
-    ExternalProject_Add(discord-rpc
-        SOURCE_DIR discord-rpc
-
-        GIT_REPOSITORY ${DISCORD_RPC_URL}
-        GIT_TAG ${DISCORD_RPC_TAG}
-
-        INSTALL_COMMAND ""
-
-        BUILD_IN_SOURCE True
-        CMAKE_ARGS -DBUILD_EXAMPLES=OFF -DCMAKE_POSITION_INDEPENDENT_CODE=ON ${CMAKE_CONFIGURE_ARGS}
-
-        BUILD_BYPRODUCTS ${THIRDPARTY_DIR}/discord-rpc/src/libdiscord-rpc.a
-    )
-endif(DISCORD_RPC)
-
-set(IMGUI_DIR ${THIRDPARTY_DIR}/imgui)
-set(IMGUI_BUILD_DIR ${IMGUI_DIR}/build)
-set(IMGUI_SOURCES_IN
+set(IMGUI_DIR ${CMAKE_CURRENT_SOURCE_DIR}/imgui)
+set(IMGUI_SOURCES
     ${IMGUI_DIR}/imgui_draw.cpp
     ${IMGUI_DIR}/imgui_tables.cpp 
     ${IMGUI_DIR}/imgui_widgets.cpp 
@@ -264,26 +230,25 @@ set(IMGUI_SOURCES_IN
     ${IMGUI_DIR}/backends/imgui_impl_opengl3.h 
     ${IMGUI_DIR}/backends/imgui_impl_opengl3_loader.h 
 )
-set(IMGUI_SOURCES_OUT
-    ${IMGUI_BUILD_DIR}/imgui_draw.cpp
-    ${IMGUI_BUILD_DIR}/imgui_tables.cpp
-    ${IMGUI_BUILD_DIR}/imgui_widgets.cpp
-    ${IMGUI_BUILD_DIR}/imgui.cpp
-    ${IMGUI_BUILD_DIR}/imgui_impl_opengl3.cpp
-    ${IMGUI_BUILD_DIR}/imgui_impl_opengl3.h 
-    ${IMGUI_BUILD_DIR}/imgui_impl_opengl3_loader.h 
+add_library(imgui STATIC ${IMGUI_SOURCES})
+target_include_directories(imgui PRIVATE ${IMGUI_DIR})
+
+set(SDL_GAMECONTROLLERDB_DIR ${CMAKE_CURRENT_SOURCE_DIR}/SDL_GameControllerDB)
+set(SDL_GAMECONTROLLERDB_BUILD_DIR ${CMAKE_CURRENT_BINARY_DIR}/SDL_GameControllerDB)
+set(SDL_GAMECONTROLLERDB_SOURCES_IN
+    ${SDL_GAMECONTROLLERDB_DIR}/gamecontrollerdb.txt
 )
-ExternalProject_Add(imgui
-    SOURCE_DIR imgui
+set(SDL_GAMECONTROLLERDB_SOURCES_OUT
+    ${SDL_GAMECONTROLLERDB_BUILD_DIR}/gamecontrollerdb.txt
+)
+ExternalProject_Add(SDL_GameControllerDB
+    SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/SDL_GameControllerDB
 
-    GIT_REPOSITORY ${IMGUI_URL}
-    GIT_TAG ${IMGUI_TAG}
-
-    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E make_directory ${IMGUI_BUILD_DIR}
-    BUILD_COMMAND ${CMAKE_COMMAND} -E copy ${IMGUI_SOURCES_IN} ${IMGUI_BUILD_DIR}
+    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E make_directory ${SDL_GAMECONTROLLERDB_BUILD_DIR}
+    BUILD_COMMAND ${CMAKE_COMMAND} -E copy ${SDL_GAMECONTROLLERDB_SOURCES_IN} ${SDL_GAMECONTROLLERDB_SOURCES_OUT}
     INSTALL_COMMAND ""
 
-    BUILD_BYPRODUCTS ${IMGUI_SOURCES_OUT}
+    BUILD_BYPRODUCTS ${SDL_GAMECONTROLLERDB_SOURCES_OUT}
 )
 
 ExternalProject_Get_property(mupen64plus-core BUILD_BYPRODUCTS)
@@ -302,25 +267,19 @@ set(MUPEN64PLUS_PLUGIN_RSP_PARALLEL ${BUILD_BYPRODUCTS} PARENT_SCOPE)
 ExternalProject_Get_property(mupen64plus-input-raphnetraw BUILD_BYPRODUCTS)
 set(MUPEN64PLUS_PLUGIN_INPUT_RAPHNET ${BUILD_BYPRODUCTS} PARENT_SCOPE)
 
-if (BUILD_INPUT_GCA)
-    ExternalProject_Get_property(mupen64plus-input-gca BUILD_BYPRODUCTS)
-    set(MUPEN64PLUS_PLUGIN_INPUT_GCA ${BUILD_BYPRODUCTS} PARENT_SCOPE)
-endif(BUILD_INPUT_GCA)
-
-ExternalProject_Get_property(mupen64plus-video-angrylion-plus BUILD_BYPRODUCTS)
-set(MUPEN64PLUS_PLUGIN_GFX_ANGRYLION ${BUILD_BYPRODUCTS} PARENT_SCOPE)
+if (USE_ANGRYLION)
+    ExternalProject_Get_property(mupen64plus-video-angrylion-plus BUILD_BYPRODUCTS)
+    set(MUPEN64PLUS_PLUGIN_GFX_ANGRYLION ${BUILD_BYPRODUCTS} PARENT_SCOPE)
+endif(USE_ANGRYLION)
 
 ExternalProject_Get_property(mupen64plus-video-GLideN64 BUILD_BYPRODUCTS)
-set(MUPEN64PLUS_PLUGIN_GFX_GLIDEN64 ${BUILD_BYPRODUCTS} ${GLIDENUI_TRANSLATIONS} ${GLIDEN64_CUSTOM_INI} PARENT_SCOPE)
+set(MUPEN64PLUS_PLUGIN_GFX_GLIDEN64 ${BUILD_BYPRODUCTS} PARENT_SCOPE)
+set(MUPEN64PLUS_PLUGIN_GFX_GLIDEN64_DATA ${GLIDEN64_CUSTOM_INI} PARENT_SCOPE)
 
 ExternalProject_Get_property(mupen64plus-video-parallel BUILD_BYPRODUCTS)
 set(MUPEN64PLUS_PLUGIN_GFX_PARALLEL ${BUILD_BYPRODUCTS} PARENT_SCOPE)
 
-if (DISCORD_RPC)
-    ExternalProject_Get_property(discord-rpc BUILD_BYPRODUCTS)
-    set(DISCORD_RPC_LIB ${BUILD_BYPRODUCTS} PARENT_SCOPE)
-endif(DISCORD_RPC)
+set(IMGUI_DIR ${CMAKE_CURRENT_SOURCE_DIR}/imgui PARENT_SCOPE)
 
-ExternalProject_Get_property(imgui BUILD_BYPRODUCTS)
-set(IMGUI_SOURCES ${BUILD_BYPRODUCTS} PARENT_SCOPE)
-set(IMGUI_DIR ${THIRDPARTY_DIR}/imgui PARENT_SCOPE)
+ExternalProject_Get_property(SDL_GameControllerDB BUILD_BYPRODUCTS)
+set(SDL_GAMECONTROLLERDB ${BUILD_BYPRODUCTS} PARENT_SCOPE)

Source/3rdParty/SDL_GameControllerDB/.github/workflows/check.yml

@@ -0,0 +1,11 @@
+name: Data check
+on:
+  push:
+    branches: [master]
+jobs:
+  duplicates:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+    - run: |
+        python duplicates.py

Source/3rdParty/SDL_GameControllerDB/.gitrepo

@@ -0,0 +1,12 @@
+; DO NOT EDIT (unless you know what you are doing)
+;
+; This subdirectory is a git "subrepo", and this file is maintained by the
+; git-subrepo command. See https://github.com/ingydotnet/git-subrepo#readme
+;
+[subrepo]
+	remote = git@github.com:/gabomdq/SDL_GameControllerDB.git
+	branch = master
+	commit = 65490d3c39825a84f9c2cb4fa9bc359284f37ca2
+	parent = 8552e07ed8d2d06bf9638aa76ac30c06d58ff147
+	method = merge
+	cmdver = 0.4.9

Source/3rdParty/SDL_GameControllerDB/LICENSE

@@ -0,0 +1,18 @@
+Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+  
+This software is provided 'as-is', without any express or implied
+warranty.  In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+  
+1. The origin of this software must not be misrepresented; you must not
+   claim that you wrote the original software. If you use this software
+   in a product, an acknowledgment in the product documentation would be
+   appreciated but is not required. 
+2. Altered source versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
+

Source/3rdParty/SDL_GameControllerDB/README.md

@@ -0,0 +1,61 @@
+# SDL_GameControllerDB
+
+A community sourced database of game controller mappings to be used with SDL2 and SDL3 Game Controller functionality.
+
+## Usage
+Download gamecontrollerdb.txt, place it in your app's directory and load it.
+
+SDL2:
+```c
+SDL_GameControllerAddMappingsFromFile("gamecontrollerdb.txt");
+```
+
+SDL3:
+```c
+SDL_AddGamepadMappingsFromFile("gamecontrollerdb.txt");
+```
+
+The database is compatible with SDL v2.0.10 and newer.
+
+## Create New Mappings
+A mapping looks like this:
+```
+030000004c050000c405000000010000,PS4 Controller,a:b1,b:b2,back:b8,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b12,leftshoulder:b4,leftstick:b10,lefttrigger:a3,leftx:a0,lefty:a1,rightshoulder:b5,rightstick:b11,righttrigger:a4,rightx:a2,righty:a5,start:b9,x:b0,y:b3,platform:Mac OS X,
+```
+It includes controller GUID (`030000004c050000c405000000010000`), a name (`PS4 Controller`), button / axis mappings (`leftshoulder:b4`) and a platform (`platform:Mac OS X`).
+
+Please make sure to check that the name is a good description of the controller. If relevant, include the controller's name and model number.
+
+## Mapping Guide
+
+![SDL Game Controller Mapping Guide](mapping_guide.png)
+
+## Mapping Tools
+There are a few different tools that let you create mappings.
+
+### [SDL2 Gamepad Tool](http://www.generalarcade.com/gamepadtool/)
+Third party cross-platform tool with GUI (Windows, macOS and Linux)
+
+*While convenient, this tool has fallen out of date as SDL has amended and added new features for gamepad support (see [#478](https://github.com/gabomdq/SDL_GameControllerDB/issues/476)). Maps authored with this tool require maintainer scrutiny to ensure they will not break support for explicit mappings the SDL project provides.*
+
+### [SDL](https://github.com/libsdl-org/SDL/releases/latest)
+[testcontroller (SDL3)](https://github.com/libsdl-org/SDL/blob/main/test/testcontroller.c) and [controllermap (SDL2)](https://github.com/libsdl-org/SDL/blob/SDL2/test/controllermap.c) utilities are the official tools to create these mappings on all SDL supported platforms (Windows, Mac, Linux, iOS, Android, etc).
+
+## Contributing
+
+First, please confirm for yourself
+- Your device is a gamepad
+- Your mapping best represents the Xbox layout per the [mapping guide](https://github.com/mdqinc/SDL_GameControllerDB/blob/master/mapping_guide.png)
+- An acceptable mapping is not [already present in the DB](https://github.com/mdqinc/SDL_GameControllerDB/blob/master/gamecontrollerdb.txt), searching by platform and GUID
+- Adding the mapping to the db improves, and does not degrade, the experience of using the gamepad
+
+Contribute by [opening a pull request](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request), or [creating an issue](https://github.com/mdqinc/SDL_GameControllerDB/issues/new)
+
+## Resources
+
+### [SDL2](https://wiki.libsdl.org/SDL2/)
+* [Game Controller Support](https://wiki.libsdl.org/SDL2/CategoryGameController)
+* [SDL_GameControllerAddMappingsFromFile](https://wiki.libsdl.org/SDL2/SDL_GameControllerAddMappingsFromFile)
+### [SDL3](https://wiki.libsdl.org/SDL3/)
+* [Gamepad Support](https://wiki.libsdl.org/SDL3/CategoryGamepad)
+* [SDL_AddGamepadMappingsFromFile](https://wiki.libsdl.org/SDL3/SDL_AddGamepadMappingsFromFile)

Source/3rdParty/SDL_GameControllerDB/duplicates.py

@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: Zlib
+
+import difflib
+import sys
+
+CROSS_PLATFORM=False
+
+cdict = {}
+for i, l in enumerate(open("gamecontrollerdb.txt")):
+    l = l.strip()
+    if l.startswith("#") or not l:
+        continue
+    
+    c = l.split(",")
+    key = tuple([c[0]]+[ce for ce in c[1:] if "platform:" in ce])
+    if CROSS_PLATFORM:
+        key = c[0]
+
+    if key in cdict:
+        print("Duplicate:", c[1], "at line", i + 1)
+        out = list(difflib.unified_diff(cdict[key], sorted(c), n=0))[3:]
+        out = [o for o in out if not o.startswith("@@")]
+        print("\t", " ".join(out))
+        if not CROSS_PLATFORM:
+            sys.exit(1)
+    cdict[key] = sorted(c)

Source/3rdParty/SDL_net/.github/actions/setup-ninja/action.yml

@@ -0,0 +1,62 @@
+name: 'Setup ninja'
+description: 'Download ninja and add it to the PATH environment variable'
+inputs:
+  version:
+    description: 'Ninja version'
+    default: '1.12.1'
+runs:
+  using: 'composite'
+  steps:
+    - name: 'Calculate variables'
+      id: calc
+      shell: sh
+      run: |
+        case "${{ runner.os }}-${{ runner.arch }}" in
+          "Linux-X86" | "Linux-X64")
+            archive="ninja-linux.zip"
+            ;;
+          "Linux-ARM64")
+            archive="ninja-linux-aarch64.zip"
+            ;;
+          "macOS-X86" | "macOS-X64" | "macOS-ARM64")
+            archive="ninja-mac.zip"
+            ;;
+          "Windows-X86" | "Windows-X64")
+            archive="ninja-win.zip"
+            ;;
+          "Windows-ARM64")
+            archive="ninja-winarm64.zip"
+            ;;
+          *)
+            echo "Unsupported ${{ runner.os }}-${{ runner.arch }}"
+            exit 1;
+            ;;
+        esac
+        echo "archive=${archive}" >> ${GITHUB_OUTPUT}
+        echo "cache-key=${archive}-${{ inputs.version }}-${{ runner.os }}-${{ runner.arch }}" >> ${GITHUB_OUTPUT}
+    - name: 'Restore cached ${{ steps.calc.outputs.archive }}'
+      id: cache-restore
+      uses: actions/cache/restore@v4
+      with:
+        path: '${{ runner.temp }}/${{ steps.calc.outputs.archive }}'
+        key: ${{ steps.calc.outputs.cache-key }}
+    - name: 'Download ninja ${{ inputs.version }} for ${{ runner.os }} (${{ runner.arch }})'
+      if: ${{ !steps.cache-restore.outputs.cache-hit || steps.cache-restore.outputs.cache-hit == 'false' }}
+      shell: pwsh
+      run: |
+        Invoke-WebRequest "https://github.com/ninja-build/ninja/releases/download/v${{ inputs.version }}/${{ steps.calc.outputs.archive }}" -OutFile "${{ runner.temp }}/${{ steps.calc.outputs.archive }}"
+    - name: 'Cache ${{ steps.calc.outputs.archive }}'
+      if: ${{ !steps.cache-restore.outputs.cache-hit || steps.cache-restore.outputs.cache-hit == 'false' }}
+      uses: actions/cache/save@v4
+      with:
+        path: '${{ runner.temp }}/${{ steps.calc.outputs.archive }}'
+        key: ${{ steps.calc.outputs.cache-key }}
+    - name: 'Extract ninja'
+      shell: pwsh
+      run: |
+        7z "-o${{ runner.temp }}/ninja-${{ inputs.version }}-${{ runner.arch }}" x "${{ runner.temp }}/${{ steps.calc.outputs.archive }}"
+    - name: 'Set output variables'
+      id: final
+      shell: pwsh
+      run: |
+        echo "${{ runner.temp }}/ninja-${{ inputs.version }}-${{ runner.arch }}" >> $env:GITHUB_PATH

Source/3rdParty/SDL_net/.github/workflows/main.yml

@@ -0,0 +1,97 @@
+name: Build
+
+on:
+  pull_request:
+  push:
+
+jobs:
+  Build:
+    name: '${{ matrix.platform.name }}'
+    runs-on: '${{ matrix.platform.os }}'
+    strategy:
+      fail-fast: false
+      matrix:
+        platform:
+          - { name: 'Linux',                    os: ubuntu-latest,  shell: sh }
+          - { name: 'MacOS',                    os: macos-latest,   shell: sh }
+#          - { name: 'Windows msys2 (mingw32)',  os: windows-latest, shell: 'msys2 {0}', msystem: mingw32, msys-env: mingw-w64-i686 }
+          - { name: 'Windows msys2 (mingw64)',  os: windows-latest, shell: 'msys2 {0}', msystem: mingw64, msys-env: mingw-w64-x86_64 }
+#          - { name: 'Windows msys2 (clang32)',  os: windows-latest, shell: 'msys2 {0}', msystem: clang32, msys-env: mingw-w64-clang-i686 }
+          - { name: 'Windows msys2 (clang64)',  os: windows-latest, shell: 'msys2 {0}', msystem: clang64, msys-env: mingw-w64-clang-x86_64 }
+#          - { name: 'Windows MSVC (x86)',       os: windows-latest, shell: sh, msvc: true, msvc-arch: x86, cmake: '-DPerl_ROOT=C:/Strawberry/perl/bin/' }
+          - { name: 'Windows MSVC (x64)',       os: windows-latest, shell: sh, msvc: true, msvc-arch: x64, cmake: '-DPerl_ROOT=C:/Strawberry/perl/bin/' }
+#          - { name: 'Windows MSVC (arm32)',     os: windows-latest, shell: sh, msvc: true, msvc-arch: amd64_arm, cross: true }
+#          - { name: 'Windows MSVC (arm64)',     os: windows-latest, shell: sh, msvc: true, msvc-arch: amd64_arm64, cross: true }
+    defaults:
+      run:
+        shell: ${{ matrix.platform.shell }}
+    steps:
+      - uses: ilammy/msvc-dev-cmd@v1
+        if: ${{ matrix.platform.msvc }}
+        with:
+          arch: ${{ matrix.platform.msvc-arch }}
+      - name: Set up MSYS2
+        if: ${{ contains(matrix.platform.shell, 'msys2') }}
+        uses: msys2/setup-msys2@v2
+        with:
+          msystem: ${{ matrix.platform.msystem }}
+          install: >-
+            ${{ matrix.platform.msys-env }}-cc
+            ${{ matrix.platform.msys-env }}-cmake
+            ${{ matrix.platform.msys-env }}-crt
+            ${{ matrix.platform.msys-env }}-ninja
+            ${{ matrix.platform.msys-env }}-perl
+      - name: Get SDL3_net sources
+        uses: actions/checkout@v6
+      - name: Install Ninja
+        if: ${{ !contains(matrix.platform.shell, 'msys2') }}
+        uses: aseprite/get-ninja@main
+      - name: Set up SDL3
+        uses: libsdl-org/setup-sdl@main
+        id: sdl
+        with:
+          cmake-generator: Ninja
+          version: 3-head
+          sdl-test: true
+          shell: ${{ matrix.platform.shell }}
+          add-to-environment: true
+      - name: Configure (CMake)
+        run: |
+          cmake -B build -GNinja \
+            -DCMAKE_BUILD_TYPE=Release \
+            -DCMAKE_INSTALL_PREFIX=prefix \
+            -DSDLNET_WERROR=ON \
+            -DSDLNET_INSTALL_MAN=ON \
+            -DCMAKE_INSTALL_PREFIX=prefix \
+            ${{ matrix.platform.cmake }}
+
+      - name: Build (CMake)
+        run: |
+          cmake --build build/ --verbose
+      - name: Install (CMake)
+        if: ${{ matrix.platform.shell == 'sh' || contains(matrix.platform.shell, 'msys2') }}
+        run: |
+          set -eu
+          rm -fr DESTDIR-cmake
+          cmake --install build/ --config Release
+          echo "SDL3_net_ROOT=$(pwd)/prefix" >> $GITHUB_ENV
+          ( cd prefix; find . ) | LC_ALL=C sort -u
+
+      - name: Verify exports files
+        if: ${{ matrix.platform.test-exports }}
+        run: |
+          set -e
+          python src/genexports.py
+          git diff --exit-code -- src/SDL_net.sym src/SDL_net.exports
+      - name: Verify CMake configuration files
+        run: |
+          cmake -S cmake/test -B cmake_config_build \
+            -DCMAKE_BUILD_TYPE=Release \
+            -DTEST_SHARED=TRUE \
+            -DTEST_STATIC=FALSE
+          cmake --build cmake_config_build --verbose
+
+      - name: Check that versioning is consistent
+        # We only need to run this once: arbitrarily use the Linux build
+        if: ${{ runner.os == 'Linux' }}
+        run: ./build-scripts/test-versioning.sh

Source/3rdParty/SDL_net/.github/workflows/release.yml

@@ -0,0 +1,793 @@
+name: 'release'
+run-name: 'Create SDL_net release artifacts for ${{ inputs.commit }}'
+
+on:
+  workflow_dispatch:
+    inputs:
+      commit:
+        description: 'Commit of SDL_net'
+        required: true
+
+jobs:
+
+  src:
+    runs-on: ubuntu-latest
+    outputs:
+      project: ${{ steps.releaser.outputs.project }}
+      version: ${{ steps.releaser.outputs.version }}
+      src-tar-gz: ${{ steps.releaser.outputs.src-tar-gz }}
+      src-tar-xz: ${{ steps.releaser.outputs.src-tar-xz }}
+      src-zip: ${{ steps.releaser.outputs.src-zip }}
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Set up SDL sources'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          path: 'SDL'
+          fetch-depth: 0
+      - name: 'Build Source archive'
+        id: releaser
+        shell: bash
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py \
+            --actions source \
+            --commit ${{ inputs.commit }} \
+            --root "${{ github.workspace }}/SDL" \
+            --github \
+            --debug
+      - name: 'Store source archives'
+        uses: actions/upload-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace}}/dist'
+      - name: 'Generate summary'
+        run: |
+          echo "Run the following commands to download all artifacts:" >> $GITHUB_STEP_SUMMARY
+          echo '```' >> $GITHUB_STEP_SUMMARY
+          echo "mkdir -p /tmp/${{ steps.releaser.outputs.project }}-${{ steps.releaser.outputs.version }}" >> $GITHUB_STEP_SUMMARY
+          echo "cd /tmp/${{ steps.releaser.outputs.project }}-${{ steps.releaser.outputs.version }}" >> $GITHUB_STEP_SUMMARY
+          echo "gh run -R ${{ github.repository }} download ${{ github.run_id }}" >> $GITHUB_STEP_SUMMARY
+          echo '```' >> $GITHUB_STEP_SUMMARY
+
+  linux-verify:
+    needs: [src]
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '/tmp'
+      - name: 'Unzip ${{ needs.src.outputs.src-zip }}'
+        id: zip
+        run: |
+          set -e
+          mkdir /tmp/zipdir
+          cd /tmp/zipdir
+          unzip "/tmp/${{ needs.src.outputs.src-zip }}"
+          echo "path=/tmp/zipdir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+      - name: 'Untar ${{ needs.src.outputs.src-tar-gz }}'
+        id: tar
+        run: |
+          set -e
+          mkdir -p /tmp/tardir
+          tar -C /tmp/tardir -v -x -f "/tmp/${{ needs.src.outputs.src-tar-gz }}"
+          echo "path=/tmp/tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+      - name: 'Compare contents of ${{ needs.src.outputs.src-zip }} and  ${{ needs.src.outputs.src-tar-gz }}'
+        run: |
+          set -e
+          diff "${{ steps.zip.outputs.path }}" "${{ steps.tar.outputs.path }}"
+      - name: 'Test versioning'
+        shell: bash
+        run: |
+          ${{ steps.tar.outputs.path }}/build-scripts/test-versioning.sh
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Download dependencies'
+        id: deps
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py \
+            --actions download \
+            --commit ${{ inputs.commit }} \
+            --root "${{ steps.tar.outputs.path }}" \
+            --github \
+            --debug
+      - name: 'Install Linux dependencies'
+        run: |
+          sudo apt-get update -y
+          sudo apt-get install -y \
+            gnome-desktop-testing libasound2-dev libpulse-dev libaudio-dev libjack-dev libsndio-dev \
+            libusb-1.0-0-dev libx11-dev libxext-dev libxrandr-dev libxcursor-dev libxfixes-dev libxi-dev \
+            libxss-dev libwayland-dev libxkbcommon-dev libdrm-dev libgbm-dev libgl1-mesa-dev libgles2-mesa-dev \
+            libegl1-mesa-dev libdbus-1-dev libibus-1.0-dev libudev-dev fcitx-libs-dev
+      - name: 'Extract dependencies, build and install them'
+        id: deps-build
+        run: |
+          tar -C /tmp -v -x -f "${{ steps.deps.outputs.dep-path }}/SDL3-${{ steps.deps.outputs.dep-sdl-version }}.tar.gz"
+          cmake -S /tmp/SDL3-${{ steps.deps.outputs.dep-sdl-version }} -B /tmp/SDL-build -DCMAKE_INSTALL_PREFIX=/tmp/deps-prefix
+          cmake --build /tmp/SDL-build
+          cmake --install /tmp/SDL-build
+          echo "path=/tmp/deps-prefix" >>$GITHUB_OUTPUT
+      - name: 'CMake (configure + build)'
+        run: |
+          cmake \
+            -S ${{ steps.tar.outputs.path }} \
+            -B /tmp/build \
+            -DSDL3net_SAMPLES=ON \
+            -DSDL3net_TESTS=ON \
+            -DCMAKE_PREFIX_PATH="${{ steps.deps-build.outputs.path }}"
+          cmake --build /tmp/build --verbose
+          # ctest --test-dir /tmp/build --no-tests=error --output-on-failure
+
+  dmg:
+    needs: [src]
+    runs-on: macos-latest
+    outputs:
+      dmg: ${{ steps.releaser.outputs.dmg }}
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Untar ${{ needs.src.outputs.src-tar-gz }}'
+        id: tar
+        run: |
+          mkdir -p "${{ github.workspace }}/tardir"
+          tar -C "${{ github.workspace }}/tardir" -v -x -f "${{ github.workspace }}/${{ needs.src.outputs.src-tar-gz }}"
+          echo "path=${{ github.workspace }}/tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+#      - name: 'Download external dependencies'
+#        run: |
+#          sh "${{ steps.tar.outputs.path }}/external/download.sh" --depth 1
+      - name: 'Build SDL3_net.dmg'
+        id: releaser
+        shell: bash
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py \
+            --actions dmg \
+            --commit ${{ inputs.commit }} \
+            --root "${{ steps.tar.outputs.path }}" \
+            --github \
+            --debug
+      - name: 'Store DMG image file'
+        uses: actions/upload-artifact@v6
+        with:
+          name: dmg
+          path: '${{ github.workspace }}/dist'
+
+  dmg-verify:
+    needs: [dmg, src]
+    runs-on: macos-latest
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Untar ${{ needs.src.outputs.src-tar-gz }}'
+        id: src
+        run: |
+          mkdir -p /tmp/tardir
+          tar -C /tmp/tardir -v -x -f "${{ github.workspace }}/${{ needs.src.outputs.src-tar-gz }}"
+          echo "path=/tmp/tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+      - name: 'Download dependencies'
+        id: deps
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py \
+            --actions download \
+            --commit ${{ inputs.commit }} \
+            --root "${{ steps.src.outputs.path }}" \
+            --github \
+            --debug
+      - name: 'Mount dependencies'
+        id: deps-mount
+        run: |
+          hdiutil attach "${{ steps.deps.outputs.dep-path }}/SDL3-${{ steps.deps.outputs.dep-sdl-version }}.dmg"
+          sdl_mount_pount="/Volumes/SDL3"
+          if [ ! -d "$sdl_mount_pount/SDL3.xcframework" ]; then
+            echo "Cannot find SDL3.xcframework!"
+            exit 1
+          fi
+          echo "path=${sdl_mount_pount}" >>$GITHUB_OUTPUT
+      - name: 'Download ${{ needs.dmg.outputs.dmg }}'
+        uses: actions/download-artifact@v6
+        with:
+          name: dmg
+          path: '${{ github.workspace }}'
+      - name: 'Mount ${{ needs.dmg.outputs.dmg }}'
+        id: mount
+        run: |
+          hdiutil attach '${{ github.workspace }}/${{ needs.dmg.outputs.dmg }}'
+          mount_point="/Volumes/${{ needs.src.outputs.project }}"
+          if [ ! -d "$mount_point/${{ needs.src.outputs.project }}.xcframework" ]; then
+            echo "Cannot find ${{ needs.src.outputs.project }}.xcframework!"
+            exit 1
+          fi
+          echo "mount-point=${mount_point}">>$GITHUB_OUTPUT
+      - name: 'CMake (configure + build) Darwin'
+        run: |
+          set -e
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }};${{ steps.deps-mount.outputs.path }}" \
+              -DCMAKE_SYSTEM_NAME=Darwin                                    \
+              -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"                      \
+              -Werror=dev                                                   \
+              -B build_darwin
+          cmake --build build_darwin --config Release --verbose
+
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }}/SDL3_net.xcframework/macos-arm64_x86_64;${{ steps.deps-mount.outputs.path }}/SDL3.xcframework/macos-arm64_x86_64" \
+              -DCMAKE_SYSTEM_NAME=Darwin                                    \
+              -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"                      \
+              -B build_darwin2
+          cmake --build build_darwin2 --config Release --verbose
+
+      - name: 'CMake (configure + build) iOS'
+        run: |
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }};${{ steps.deps-mount.outputs.path }}" \
+              -DCMAKE_SYSTEM_NAME=iOS                                       \
+              -DCMAKE_OSX_ARCHITECTURES="arm64"                             \
+              -Werror=dev                                                   \
+              -B build_ios
+          cmake --build build_ios --config Release --verbose
+
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }}/SDL3_net.xcframework/ios-arm64;${{ steps.deps-mount.outputs.path }}/SDL3.xcframework/ios-arm64" \
+              -DCMAKE_SYSTEM_NAME=iOS                                       \
+              -DCMAKE_OSX_ARCHITECTURES="arm64"                             \
+              -B build_ios2
+          cmake --build build_ios2 --config Release --verbose
+      - name: 'CMake (configure + build) tvOS'
+        run: |
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }};${{ steps.deps-mount.outputs.path }}" \
+              -DCMAKE_SYSTEM_NAME=tvOS                                      \
+              -DCMAKE_OSX_ARCHITECTURES="arm64"                             \
+              -Werror=dev                                                   \
+              -B build_tvos
+          cmake --build build_tvos --config Release --verbose
+
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }}/SDL3_net.xcframework/tvos-arm64;${{ steps.deps-mount.outputs.path }}/SDL3.xcframework/tvos-arm64" \
+              -DCMAKE_SYSTEM_NAME=tvOS                                      \
+              -DCMAKE_OSX_ARCHITECTURES="arm64"                             \
+              -B build_tvos2
+          cmake --build build_tvos2 --config Release --verbose
+      - name: 'CMake (configure + build) iOS simulator'
+        run: |
+          sysroot=$(xcodebuild -version -sdk iphonesimulator Path)
+          echo "sysroot=$sysroot"
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }};${{ steps.deps-mount.outputs.path }}" \
+              -DCMAKE_SYSTEM_NAME=iOS                                       \
+              -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"                      \
+              -DCMAKE_OSX_SYSROOT="${sysroot}"                              \
+              -Werror=dev                                                   \
+              -B build_ios_simulator
+          cmake --build build_ios_simulator --config Release --verbose
+
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }}/SDL3_net.xcframework/ios-arm64_x86_64-simulator;${{ steps.deps-mount.outputs.path }}/SDL3.xcframework/ios-arm64_x86_64-simulator" \
+              -DCMAKE_SYSTEM_NAME=iOS                                       \
+              -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"                      \
+              -DCMAKE_OSX_SYSROOT="${sysroot}"                              \
+              -B build_ios_simulator2
+          cmake --build build_ios_simulator2 --config Release --verbose
+      - name: 'CMake (configure + build) tvOS simulator'
+        run: |
+          sysroot=$(xcodebuild -version -sdk appletvsimulator Path)
+          echo "sysroot=$sysroot"
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }};${{ steps.deps-mount.outputs.path }}" \
+              -DCMAKE_SYSTEM_NAME=tvOS                                      \
+              -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"                      \
+              -DCMAKE_OSX_SYSROOT="${sysroot}"                              \
+              -Werror=dev                                                   \
+              -B build_tvos_simulator
+          cmake --build build_tvos_simulator --config Release --verbose
+
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"               \
+              -DTEST_SHARED=TRUE                                            \
+              -DTEST_STATIC=FALSE                                           \
+              -DCMAKE_PREFIX_PATH="${{ steps.mount.outputs.mount-point }}/SDL3_net.xcframework/tvos-arm64_x86_64-simulator;${{ steps.deps-mount.outputs.path }}/SDL3.xcframework/tvos-arm64_x86_64-simulator" \
+              -DCMAKE_SYSTEM_NAME=tvOS                                      \
+              -DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"                      \
+              -DCMAKE_OSX_SYSROOT="${sysroot}"                              \
+              -B build_tvos_simulator2
+          cmake --build build_tvos_simulator2 --config Release --verbose
+
+  msvc:
+    needs: [src]
+    runs-on: windows-2025
+    outputs:
+      VC-x86: ${{ steps.releaser.outputs.VC-x86 }}
+      VC-x64: ${{ steps.releaser.outputs.VC-x64 }}
+      VC-devel: ${{ steps.releaser.outputs.VC-devel }}
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Unzip ${{ needs.src.outputs.src-zip }}'
+        id: zip
+        run: |
+          New-Item C:\temp -ItemType Directory -ErrorAction SilentlyContinue
+          cd C:\temp
+          unzip "${{ github.workspace }}/${{ needs.src.outputs.src-zip }}"
+          echo "path=C:\temp\${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$Env:GITHUB_OUTPUT
+#      - name: 'Download external dependencies'
+#        run: |
+#          ${{ steps.zip.outputs.path }}/external/Get-GitModules.ps1
+      - name: 'Build MSVC binary archives'
+        id: releaser
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py `
+            --actions download msvc `
+            --commit ${{ inputs.commit }} `
+            --root "${{ steps.zip.outputs.path }}" `
+            --github `
+            --debug
+      - name: 'Store MSVC archives'
+        uses: actions/upload-artifact@v6
+        with:
+          name: msvc
+          path: '${{ github.workspace }}/dist'
+
+  msvc-verify:
+    needs: [msvc, src]
+    runs-on: windows-latest
+    steps:
+      - name: 'Fetch .github/actions/setup-ninja/action.yml'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: |
+            .github/actions/setup-ninja/action.yml
+            build-scripts/build-release.py
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: Set up ninja
+        uses: ./.github/actions/setup-ninja
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Unzip ${{ needs.src.outputs.src-zip }}'
+        id: src
+        run: |
+          mkdir '${{ github.workspace }}/sources'
+          cd '${{ github.workspace }}/sources'
+          unzip "${{ github.workspace }}/${{ needs.src.outputs.src-zip }}"
+          echo "path=${{ github.workspace }}/sources/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$env:GITHUB_OUTPUT
+      - name: 'Download dependencies'
+        id: deps
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py `
+            --actions download `
+            --commit ${{ inputs.commit }} `
+            --root "${{ steps.src.outputs.path }}" `
+            --github `
+            --debug
+      - name: 'Extract dependencies'
+        id: deps-extract
+        run: |
+          mkdir '${{ github.workspace }}/deps-vc'
+          cd '${{ github.workspace }}/deps-vc'
+          unzip "${{ steps.deps.outputs.dep-path }}/SDL3-devel-${{ steps.deps.outputs.dep-sdl-version }}-VC.zip"
+          echo "path=${{ github.workspace }}/deps-vc" >>$env:GITHUB_OUTPUT
+      - name: 'Download MSVC binaries'
+        uses: actions/download-artifact@v6
+        with:
+          name: msvc
+          path: '${{ github.workspace }}'
+      - name: 'Unzip ${{ needs.msvc.outputs.VC-devel }}'
+        id: bin
+        run: |
+          mkdir '${{ github.workspace }}/vc'
+          cd '${{ github.workspace }}/vc'
+          unzip "${{ github.workspace }}/${{ needs.msvc.outputs.VC-devel }}"
+          echo "path=${{ github.workspace }}/vc/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$env:GITHUB_OUTPUT
+      - name: 'Configure vcvars x86'
+        uses: ilammy/msvc-dev-cmd@v1
+        with:
+          arch: x64_x86
+      - name: 'CMake (configure + build + tests) x86'
+        run: |
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"     `
+              -B build_x86                                        `
+              -GNinja                                             `
+              -DCMAKE_BUILD_TYPE=Debug                            `
+              -Werror=dev                                         `
+              -DTEST_SHARED=TRUE                                  `
+              -DTEST_STATIC=FALSE                                 `
+              -DCMAKE_SUPPRESS_REGENERATION=TRUE                  `
+              -DCMAKE_PREFIX_PATH="${{ steps.bin.outputs.path }};${{ steps.deps-extract.outputs.path }}"
+          Start-Sleep -Seconds 2
+          cmake --build build_x86 --config Release --verbose
+      - name: 'Configure vcvars x64'
+        uses: ilammy/msvc-dev-cmd@v1
+        with:
+          arch: x64
+      - name: 'CMake (configure + build + tests) x64'
+        run: |
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"     `
+              -B build_x64                                        `
+              -GNinja                                             `
+              -DCMAKE_BUILD_TYPE=Debug                            `
+              -Werror=dev                                         `
+              -DTEST_SHARED=TRUE                                  `
+              -DTEST_STATIC=FALSE                                 `
+              -DCMAKE_SUPPRESS_REGENERATION=TRUE                  `
+              -DCMAKE_PREFIX_PATH="${{ steps.bin.outputs.path }};${{ steps.deps-extract.outputs.path }}"
+          Start-Sleep -Seconds 2
+          cmake --build build_x64 --config Release --verbose
+      - name: 'Configure vcvars arm64'
+        uses: ilammy/msvc-dev-cmd@v1
+        with:
+          arch: x64_arm64
+      - name: 'CMake (configure + build + tests) arm64'
+        run: |
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test"     `
+              -B build_arm64                                        `
+              -GNinja                                             `
+              -DCMAKE_BUILD_TYPE=Debug                            `
+              -Werror=dev                                         `
+              -DTEST_SHARED=TRUE                                  `
+              -DTEST_STATIC=FALSE                                 `
+              -DCMAKE_SUPPRESS_REGENERATION=TRUE                  `
+              -DCMAKE_PREFIX_PATH="${{ steps.bin.outputs.path }};${{ steps.deps-extract.outputs.path }}"
+          Start-Sleep -Seconds 2
+          cmake --build build_arm64 --config Release --verbose
+
+  mingw:
+    needs: [src]
+    runs-on: ubuntu-24.04  # FIXME: current ubuntu-latest ships an outdated mingw, replace with ubuntu-latest once 24.04 becomes the new default
+    outputs:
+      mingw-devel-tar-gz: ${{ steps.releaser.outputs.mingw-devel-tar-gz }}
+      mingw-devel-tar-xz: ${{ steps.releaser.outputs.mingw-devel-tar-xz }}
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Install Mingw toolchain'
+        run: |
+          sudo apt-get update -y
+          sudo apt-get install -y gcc-mingw-w64 g++-mingw-w64 ninja-build
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Untar ${{ needs.src.outputs.src-tar-gz }}'
+        id: tar
+        run: |
+          mkdir -p /tmp/tardir
+          tar -C /tmp/tardir -v -x -f "${{ github.workspace }}/${{ needs.src.outputs.src-tar-gz }}"
+          echo "path=/tmp/tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+      - name: 'Build MinGW binary archives'
+        id: releaser
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py \
+            --actions download mingw \
+            --commit ${{ inputs.commit }} \
+            --root "${{ steps.tar.outputs.path }}" \
+            --github \
+            --debug
+      - name: 'Store MinGW archives'
+        uses: actions/upload-artifact@v6
+        with:
+          name: mingw
+          path: '${{ github.workspace }}/dist'
+
+  mingw-verify:
+    needs: [mingw, src]
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          ref: ${{ inputs.commit }}
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Install Mingw toolchain'
+        run: |
+          sudo apt-get update -y
+          sudo apt-get install -y gcc-mingw-w64 g++-mingw-w64 ninja-build
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Untar ${{ needs.src.outputs.src-tar-gz }}'
+        id: src
+        run: |
+          mkdir -p /tmp/tardir
+          tar -C /tmp/tardir -v -x -f "${{ github.workspace }}/${{ needs.src.outputs.src-tar-gz }}"
+          echo "path=/tmp/tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+      - name: 'Download dependencies'
+        id: deps
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py \
+            --actions download \
+            --commit ${{ inputs.commit }} \
+            --root "${{ steps.src.outputs.path }}" \
+            --github \
+            --debug
+      - name: 'Untar and install dependencies'
+        id: deps-extract
+        run: |
+          mkdir -p /tmp/deps-mingw/cmake
+          mkdir -p /tmp/deps-mingw/i686-w64-mingw32
+          mkdir -p /tmp/deps-mingw/x86_64-w64-mingw32
+          
+          mkdir -p /tmp/deps-mingw-extract/sdl3
+          tar -C /tmp/deps-mingw-extract/sdl3 -v -x -f "${{ steps.deps.outputs.dep-path }}/SDL3-devel-${{ steps.deps.outputs.dep-sdl-version }}-mingw.tar.gz"
+          make -C /tmp/deps-mingw-extract/sdl3/SDL3-${{ steps.deps.outputs.dep-sdl-version }} install-all DESTDIR=/tmp/deps-mingw
+
+          # FIXME: this should be fixed in SDL3 releases after 3.1.3
+          mkdir -p /tmp/deps-mingw/cmake
+          cp -rv /tmp/deps-mingw-extract/sdl3/SDL3-${{ steps.deps.outputs.dep-sdl-version }}/cmake/* /tmp/deps-mingw/cmake
+      - name: 'Download MinGW binaries'
+        uses: actions/download-artifact@v6
+        with:
+          name: mingw
+          path: '${{ github.workspace }}'
+      - name: 'Untar and install ${{ needs.mingw.outputs.mingw-devel-tar-gz }}'
+        id: bin
+        run: |
+          mkdir -p /tmp/mingw-tardir
+          tar -C /tmp/mingw-tardir -v -x -f "${{ github.workspace }}/${{ needs.mingw.outputs.mingw-devel-tar-gz }}"
+          make -C /tmp/mingw-tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }} install-all DESTDIR=/tmp/deps-mingw
+      - name: 'CMake (configure + build) i686'
+        run: |
+          set -e
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test" \
+              -DCMAKE_BUILD_TYPE="Release" \
+              -DTEST_SHARED=TRUE \
+              -DTEST_STATIC=FALSE \
+              -DCMAKE_PREFIX_PATH="/tmp/deps-mingw" \
+              -DCMAKE_TOOLCHAIN_FILE="${{ steps.src.outputs.path }}/build-scripts/cmake-toolchain-mingw64-i686.cmake" \
+              -Werror=dev \
+              -B build_x86
+          cmake --build build_x86 --config Release --verbose
+      - name: 'CMake (configure + build) x86_64'
+        run: |
+          set -e
+          cmake -S "${{ steps.src.outputs.path }}/cmake/test" \
+              -DCMAKE_BUILD_TYPE="Release" \
+              -DTEST_SHARED=TRUE \
+              -DTEST_STATIC=FALSE \
+              -DCMAKE_PREFIX_PATH="/tmp/deps-mingw" \
+              -DCMAKE_TOOLCHAIN_FILE="${{ steps.src.outputs.path }}/build-scripts/cmake-toolchain-mingw64-x86_64.cmake" \
+              -Werror=dev \
+              -B build_x64
+          cmake --build build_x64 --config Release --verbose
+
+  android:
+    needs: [src]
+    runs-on: ubuntu-latest
+    outputs:
+      android-aar: ${{ steps.releaser.outputs.android-aar }}
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - name: 'Fetch build-release.py'
+        uses: actions/checkout@v6
+        with:
+          sparse-checkout: 'build-scripts/build-release.py'
+      - name: 'Setup Android NDK'
+        id: setup-ndk
+        uses: nttld/setup-ndk@v1
+        with:
+          local-cache: false
+          ndk-version: r28c
+      - name: 'Setup Java JDK'
+        uses: actions/setup-java@v5
+        with:
+          distribution: 'temurin'
+          java-version: '11'
+      - name: 'Install ninja'
+        run: |
+          sudo apt-get update -y
+          sudo apt-get install -y ninja-build
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Untar ${{ needs.src.outputs.src-tar-gz }}'
+        id: tar
+        run: |
+          mkdir -p /tmp/tardir
+          tar -C /tmp/tardir -v -x -f "${{ github.workspace }}/${{ needs.src.outputs.src-tar-gz }}"
+          echo "path=/tmp/tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+      - name: 'Build Android prefab binary archive(s)'
+        id: releaser
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python build-scripts/build-release.py \
+            --actions download android \
+            --android-api 21 \
+            --android-ndk-home "${{ steps.setup-ndk.outputs.ndk-path }}" \
+            --commit ${{ inputs.commit }} \
+            --root "${{ steps.tar.outputs.path }}" \
+            --github \
+            --debug
+      - name: 'Store Android archive(s)'
+        uses: actions/upload-artifact@v6
+        with:
+          name: android
+          path: '${{ github.workspace }}/dist'
+
+  android-verify:
+    needs: [android, src]
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Set up Python'
+        uses: actions/setup-python@v5
+        with:
+          python-version: '3.11'
+      - uses: actions/setup-java@v5
+        with:
+          distribution: 'temurin'
+          java-version: '17'
+      - name: 'Download source archives'
+        uses: actions/download-artifact@v6
+        with:
+          name: sources
+          path: '${{ github.workspace }}'
+      - name: 'Download Android .aar archive'
+        uses: actions/download-artifact@v6
+        with:
+          name: android
+          path: '${{ github.workspace }}'
+      - name: 'Untar ${{ needs.src.outputs.src-tar-gz }}'
+        id: src
+        run: |
+          mkdir -p /tmp/tardir
+          tar -C /tmp/tardir -v -x -f "${{ github.workspace }}/${{ needs.src.outputs.src-tar-gz }}"
+          echo "path=/tmp/tardir/${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}" >>$GITHUB_OUTPUT
+      - name: 'Extract Android SDK from AAR'
+        id: sdk
+        run: |
+          unzip -o "${{ github.workspace }}/${{ needs.android.outputs.android-aar }}"
+          python "${{ needs.src.outputs.project }}-${{ needs.src.outputs.version }}.aar" -o /tmp/SDL3_net-android
+          echo "prefix=/tmp/SDL3_net-android" >>$GITHUB_OUTPUT
+      - name: 'Download dependencies'
+        id: deps
+        env:
+          GH_TOKEN: ${{ github.token }}
+        run: |
+          python "${{ steps.src.outputs.path }}/build-scripts/build-release.py" \
+            --actions download \
+            --commit ${{ inputs.commit }} \
+            --root "${{ steps.src.outputs.path }}" \
+            --github \
+            --debug
+      - name: 'Extract dependencies'
+        id: deps-extract
+        run: |
+          unzip -o "${{ steps.deps.outputs.dep-path }}/SDL3-devel-${{ steps.deps.outputs.dep-sdl-version }}-android.zip"
+          python "SDL3-${{ steps.deps.outputs.dep-sdl-version }}.aar" -o /tmp/SDL3-android
+          echo "sdl3-prefix=/tmp/SDL3-android" >>$GITHUB_OUTPUT
+      - name: 'Install ninja'
+        run: |
+          sudo apt-get update -y
+          sudo apt-get install -y ninja-build
+      - name: 'Verify alignment of libSDL3_net.so (arm64-v8a/x86_64)'
+        run: |
+          set -e
+          ${{ steps.src.outputs.path }}/build-scripts/check_elf_alignment.sh ${{ steps.sdk.outputs.prefix }}/lib/arm64-v8a/libSDL3_net.so
+          ${{ steps.src.outputs.path }}/build-scripts/check_elf_alignment.sh ${{ steps.sdk.outputs.prefix }}/lib/x86_64/libSDL3_net.so
+      - name: 'CMake (configure + build) x86, x64, arm32, arm64'
+        run: |
+          android_abis="x86 x86_64 armeabi-v7a arm64-v8a"
+          for android_abi in ${android_abis}; do
+            echo "Configuring ${android_abi}..."
+            cmake -S "${{ steps.src.outputs.path }}/cmake/test" \
+              -GNinja \
+              -DTEST_FULL=TRUE \
+              -DTEST_STATIC=FALSE \
+              -DCMAKE_PREFIX_PATH="${{ steps.sdk.outputs.prefix }};${{ steps.deps-extract.outputs.sdl3-prefix }}" \
+              -DCMAKE_TOOLCHAIN_FILE=${ANDROID_NDK_HOME}/build/cmake/android.toolchain.cmake \
+              -DANDROID_ABI=${android_abi} \
+              -DCMAKE_BUILD_TYPE=Release \
+              -B "${android_abi}"
+            echo "Building ${android_abi}..."
+            cmake --build "${android_abi}" --config Release --verbose
+          done

Source/3rdParty/SDL_net/.gitignore

@@ -0,0 +1,77 @@
+build/
+buildbot/
+!build-scripts/
+/VERSION.txt
+
+*.so
+*.so.*
+*.dylib
+*.dll
+*.exe
+*.o
+*.obj
+*.res
+*.lib
+*.a
+*.la
+*.dSYM
+*,e1f
+*,ff8
+*.lnk
+*.err
+*.exp
+*.map
+*.orig
+*~
+*.swp
+*.tmp
+*.rej
+
+sdl3-net.pc
+get-local-addrs
+resolve-hostnames
+simple-http-get
+voipchat
+
+# for CMake
+CMakeFiles/
+CMakeScripts/
+CMakeCache.txt
+cmake_install.cmake
+cmake_uninstall.cmake
+SDL3_netConfig.cmake
+SDL3_netConfigVersion.cmake
+compile_commands.json
+Makefile
+.ninja_*
+*.ninja
+Debug/
+Release/
+RelWithDebInfo/
+MinSizeRel/
+dummy.sym
+
+# for CLion
+.idea
+cmake-build-*
+
+# for Xcode
+*.mode1*
+*.perspective*
+*.pbxuser
+(^|/)build($|/)
+.DS_Store
+xcuserdata
+*.xcworkspace
+
+# for Visual C++
+.vs
+CMakeSettings.json
+out/
+/*.sln
+/*.vcxproj*
+*.dir
+*.user
+*.ncb
+*.suo
+*.sdf

Source/3rdParty/SDL_net/.gitrepo

@@ -0,0 +1,12 @@
+; DO NOT EDIT (unless you know what you are doing)
+;
+; This subdirectory is a git "subrepo", and this file is maintained by the
+; git-subrepo command. See https://github.com/ingydotnet/git-subrepo#readme
+;
+[subrepo]
+	remote = git@github.com:libsdl-org/SDL_net.git
+	branch = main
+	commit = 4dd85af45d8597f93796815fba0defa5d499be21
+	parent = 02eef161e7f4ac7a4deebd0115574b7a27c5f58f
+	method = merge
+	cmdver = 0.4.9

Source/3rdParty/SDL_net/.wikiheaders-options

@@ -0,0 +1,22 @@
+projectfullname = SDL_net
+projectshortname = SDL_net
+incsubdir = include/SDL3_net
+wikisubdir = SDL3_net
+apiprefixregex = (NET_|SDL_NET_)
+mainincludefname = SDL3_net/SDL_net.h
+versionfname = include/SDL3_net/SDL_net.h
+versionmajorregex = \A\#define\s+SDL_NET_MAJOR_VERSION\s+(\d+)\Z
+versionminorregex = \A\#define\s+SDL_NET_MINOR_VERSION\s+(\d+)\Z
+versionmicroregex = \A\#define\s+SDL_NET_MICRO_VERSION\s+(\d+)\Z
+selectheaderregex = \ASDL_net\.h\Z
+projecturl = https://libsdl.org/projects/SDL_net
+wikiurl = https://wiki.libsdl.org/SDL_net
+bugreporturl = https://github.com/libsdl-org/sdlwiki/issues/new
+warn_about_missing = 0
+wikipreamble = (This function is part of SDL_net, a separate library from SDL.)
+wikiheaderfiletext = Defined in [<SDL3_net/%fname%>](https://github.com/libsdl-org/SDL_net/blob/main/include/SDL3_net/%fname%)
+manpageheaderfiletext = Defined in SDL3_net/%fname%
+quickrefenabled = 1
+quickreftitle = SDL3_net API Quick Reference
+quickrefurl = https://libsdl.org/
+quickrefdesc = The latest version of this document can be found at https://wiki.libsdl.org/SDL3_net/QuickReference

Source/3rdParty/SDL_net/Android.mk

@@ -0,0 +1,57 @@
+LOCAL_PATH := $(call my-dir)
+
+###########################
+#
+# SDL_net shared library
+#
+###########################
+
+include $(CLEAR_VARS)
+
+LOCAL_MODULE := SDL3_net
+
+LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
+
+LOCAL_EXPORT_C_INCLUDES := $(LOCAL_PATH)/include
+
+LOCAL_SRC_FILES := \
+	$(subst $(LOCAL_PATH)/,,) \
+	$(wildcard $(LOCAL_PATH)/src/*.c) \
+
+LOCAL_CFLAGS =
+
+# Warnings we haven't fixed (yet)
+LOCAL_CFLAGS += -Wno-unused-parameter -Wno-sign-compare
+
+LOCAL_LDLIBS :=
+
+LOCAL_LDFLAGS := -Wl,--no-undefined -Wl,--no-undefined-version -Wl,--version-script=$(LOCAL_PATH)/src/SDL_net.sym
+
+ifeq ($(NDK_DEBUG),1)
+    cmd-strip :=
+endif
+
+LOCAL_SHARED_LIBRARIES := SDL3
+
+include $(BUILD_SHARED_LIBRARY)
+
+###########################
+#
+# SDL_net static library
+#
+###########################
+
+LOCAL_MODULE := SDL3_net_static
+
+LOCAL_MODULE_FILENAME := libSDL3_net
+
+LOCAL_LDLIBS :=
+
+LOCAL_LDFLAGS :=
+
+LOCAL_EXPORT_LDLIBS :=
+
+LOCAL_STATIC_LIBRARIES := SDL3
+LOCAL_SHARED_LIBRARIES :=
+
+include $(BUILD_STATIC_LIBRARY)

Source/3rdParty/SDL_net/CMakeLists.txt

@@ -0,0 +1,326 @@
+cmake_minimum_required(VERSION 3.16...4.0)
+
+if(NOT DEFINED CMAKE_BUILD_TYPE)
+    set(cmake_build_type_undefined 1)
+endif()
+
+list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_LIST_DIR}/cmake")
+
+# See docs/release_checklist.md
+set(MAJOR_VERSION 3)
+set(MINOR_VERSION 0)
+set(MICRO_VERSION 0)
+set(SDL_REQUIRED_VERSION 3.0.0)
+
+project(SDL3_net
+    LANGUAGES C
+    VERSION "${MAJOR_VERSION}.${MINOR_VERSION}.${MICRO_VERSION}"
+)
+
+include("${SDL3_net_SOURCE_DIR}/cmake/GetGitRevisionDescription.cmake")
+include("${SDL3_net_SOURCE_DIR}/cmake/PrivateSdlFunctions.cmake")
+include("${SDL3_net_SOURCE_DIR}/cmake/sdlmanpages.cmake")
+sdl_calculate_derived_version_variables(${MAJOR_VERSION} ${MINOR_VERSION} ${MICRO_VERSION})
+
+message(STATUS "Configuring ${PROJECT_NAME} ${PROJECT_VERSION}")
+
+if(CMAKE_SOURCE_DIR STREQUAL PROJECT_SOURCE_DIR)
+    set(SDLNET_ROOTPROJECT ON)
+else()
+    set(SDLNET_ROOTPROJECT OFF)
+endif()
+
+# By default, configure in RelWithDebInfo configuration
+if(SDLNET_ROOTPROJECT)
+    get_property(is_multi_config GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
+    if(is_multi_config)
+        # The first item in CMAKE_CONFIGURATION_TYPES is the default configuration
+        if(DEFINED CMAKE_CONFIGURATION_TYPES AND "RelWithDebInfo" IN_LIST CMAKE_CONFIGURATION_TYPES)
+            list(REMOVE_ITEM CMAKE_CONFIGURATION_TYPES "RelWithDebInfo")
+            list(INSERT CMAKE_CONFIGURATION_TYPES 0 "RelWithDebInfo")
+            set(CMAKE_CONFIGURATION_TYPES "${CMAKE_CONFIGURATION_TYPES}" CACHE STRING "CMake configuration types" FORCE)
+        endif()
+    else()
+        if(cmake_build_type_undefined)
+            set(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING "CMake build type" FORCE)
+        endif()
+    endif()
+endif()
+
+set(SDLNET_SAMPLES_DEFAULT ${SDLNET_ROOTPROJECT})
+if(ANDROID)
+    set(SDLNET_SAMPLES_DEFAULT OFF)
+endif()
+
+set(sdl3net_install_enableable ON)
+if((TARGET SDL3-shared OR TARGET SDL3-static) AND SDL_DISABLE_INSTALL)
+    # Cannot install SDL3_net when SDL3 is built in same built, and is not installed.
+    set(sdl3net_install_enableable OFF)
+endif()
+
+if(NOT DEFINED CMAKE_FIND_PACKAGE_PREFER_CONFIG)
+    set(CMAKE_FIND_PACKAGE_PREFER_CONFIG ON)
+endif()
+
+include(CMakeDependentOption)
+include(CMakePackageConfigHelpers)
+include(GNUInstallDirs)
+
+set(PLATFORM_SUPPORTS_SHARED ON)
+if(EMSCRIPTEN OR VITA OR PSP OR PS2 OR N3DS OR RISCOS)
+    set(PLATFORM_SUPPORTS_SHARED OFF)
+endif()
+
+option(CMAKE_POSITION_INDEPENDENT_CODE "Build static libraries with -fPIC" ${PLATFORM_SUPPORTS_SHARED})
+cmake_dependent_option(BUILD_SHARED_LIBS "Build the library as a shared library" ON PLATFORM_SUPPORTS_SHARED OFF)
+
+cmake_dependent_option(SDLNET_INSTALL "Enable SDL3_net install target" ${SDLNET_ROOTPROJECT} "${sdl3net_install_enableable}" OFF)
+cmake_dependent_option(SDLNET_INSTALL_MAN "Install man pages for SDL3_net" OFF "SDLNET_INSTALL" OFF)
+cmake_dependent_option(SDLNET_RELOCATABLE "Create relocatable SDL_net package" "${MSVC}" SDLNET_INSTALL OFF)
+option(SDLNET_WERROR "Treat warnings as errors" OFF)
+
+option(SDLNET_SAMPLES "Build the SDL3_net sample program(s)" ${SDLNET_SAMPLES_DEFAULT})
+cmake_dependent_option(SDLNET_SAMPLES_INSTALL "Install the SDL3_net sample program(s)" OFF "SDLNET_SAMPLES;SDLNET_INSTALL" OFF)
+
+# Save BUILD_SHARED_LIBS variable
+set(SDLNET_BUILD_SHARED_LIBS ${BUILD_SHARED_LIBS})
+
+set(sdl_required_components Headers)
+
+if(SDLNET_BUILD_SHARED_LIBS)
+    set(sdl3_net_target_name SDL3_net-shared)
+    set(sdl3_target_name SDL3::SDL3-shared)
+
+    list(APPEND sdl_required_components SDL3-shared)
+else()
+    set(sdl3_net_target_name SDL3_net-static)
+    set(sdl3_target_name SDL3::SDL3)
+endif()
+
+if(NOT TARGET SDL3::Headers OR NOT TARGET ${sdl3_target_name})
+    find_package(SDL3 ${SDL_REQUIRED_VERSION} REQUIRED COMPONENTS ${sdl_required_components})
+endif()
+
+set(PC_LIBS)
+set(PC_REQUIRES)
+
+add_library(${sdl3_net_target_name} src/SDL_net.c)
+add_library(SDL3_net::${sdl3_net_target_name} ALIAS ${sdl3_net_target_name})
+set_property(TARGET ${sdl3_net_target_name} PROPERTY C_STANDARD 99)
+if(NOT TARGET SDL3_net::SDL3_net)
+    add_library(SDL3_net::SDL3_net ALIAS ${sdl3_net_target_name})
+endif()
+target_include_directories(${sdl3_net_target_name}
+    PUBLIC
+        "$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include>"
+        "$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>"
+)
+target_compile_definitions(${sdl3_net_target_name} PRIVATE
+    BUILD_SDL
+    SDL_BUILD_MAJOR_VERSION=${MAJOR_VERSION}
+    SDL_BUILD_MINOR_VERSION=${MINOR_VERSION}
+    SDL_BUILD_MICRO_VERSION=${MICRO_VERSION}
+)
+# Make sure SDL3's include directory comes first
+target_include_directories(${sdl3_net_target_name} PRIVATE $<TARGET_PROPERTY:SDL3::Headers,INTERFACE_INCLUDE_DIRECTORIES>)
+target_link_libraries(${sdl3_net_target_name} PUBLIC SDL3::Headers)
+if(SDLNET_BUILD_SHARED_LIBS)
+    target_link_libraries(${sdl3_net_target_name} PRIVATE SDL3::SDL3-shared)
+endif()
+sdl_add_warning_options(${sdl3_net_target_name} WARNING_AS_ERROR ${SDLNET_WERROR})
+if(WIN32)
+    if(SDLNET_BUILD_SHARED_LIBS)
+        target_sources(${sdl3_net_target_name} PRIVATE
+            src/version.rc
+        )
+        if(MINGW)
+            target_link_options(${sdl3_net_target_name} PRIVATE -static-libgcc)
+        endif()
+    endif()
+    target_link_libraries(${sdl3_net_target_name} PRIVATE iphlpapi ws2_32)
+    list(APPEND PC_LIBS -liphlpapi -lws2_32)
+endif()
+if(CMAKE_SYSTEM_NAME MATCHES "Haiku.*")
+    target_link_libraries(${sdl3_net_target_name} PRIVATE network)
+endif()
+set_target_properties(${sdl3_net_target_name} PROPERTIES
+    OUTPUT_NAME "SDL3_net"
+    DEFINE_SYMBOL DLL_EXPORT
+    EXPORT_NAME ${sdl3_net_target_name}
+    C_VISIBILITY_PRESET "hidden"
+)
+
+sdl_target_link_option_version_file(${sdl3_net_target_name} "${CMAKE_CURRENT_SOURCE_DIR}/src/SDL_net.sym")
+
+if(NOT ANDROID)
+    set_target_properties(${sdl3_net_target_name} PROPERTIES
+        SOVERSION "${SO_VERSION_MAJOR}"
+        VERSION "${SO_VERSION}"
+    )
+    if(APPLE)
+        set_target_properties(${sdl3_net_target_name} PROPERTIES
+            MACHO_COMPATIBILITY_VERSION "${DYLIB_COMPAT_VERSION}"
+            MACHO_CURRENT_VERSION "${DYLIB_CURRENT_VERSION}"
+        )
+        sdl_no_deprecated_errors(${sdl3_net_target_name})
+        set_property(TARGET ${sdl3_net_target_name} APPEND PROPERTY LINK_DEPENDS
+                "${PROJECT_SOURCE_DIR}/src/SDL_net.exports")
+        target_link_options(${sdl3_net_target_name} PRIVATE
+                "SHELL:-Wl,-exported_symbols_list,${PROJECT_SOURCE_DIR}/src/SDL_net.exports")
+    endif()
+endif()
+if(SDLNET_BUILD_SHARED_LIBS)
+    if(WIN32)
+        set_target_properties(${sdl3_net_target_name} PROPERTIES
+            PREFIX ""
+        )
+    endif()
+else()
+    if(MSVC)
+        set_target_properties(${sdl3_net_target_name} PROPERTIES
+            OUTPUT_NAME "SDL3_net-static"
+        )
+    endif()
+endif()
+
+# Use `Compatible Interface Properties` to ensure a shared SDL3_net is built with a shared SDL3
+if(SDLNET_BUILD_SHARED_LIBS)
+    set_property(TARGET ${sdl3_net_target_name} PROPERTY INTERFACE_SDL3_SHARED TRUE)
+    set_property(TARGET ${sdl3_net_target_name} APPEND PROPERTY COMPATIBLE_INTERFACE_BOOL SDL3_SHARED)
+endif()
+
+if(SDLNET_BUILD_SHARED_LIBS)
+    sdl_target_link_options_no_undefined(${sdl3_net_target_name})
+endif()
+
+if(SDLNET_INSTALL)
+    install(
+        TARGETS ${sdl3_net_target_name}
+        EXPORT SDL3NetExports
+        ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" COMPONENT devel
+        LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}" COMPONENT library
+        RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}" COMPONENT library
+    )
+    install(
+        FILES "${CMAKE_CURRENT_SOURCE_DIR}/include/SDL3_net/SDL_net.h"
+        DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/SDL3_net" COMPONENT devel
+    )
+
+    if(WIN32 AND NOT MINGW)
+        set(SDLNET_INSTALL_CMAKEDIR_ROOT_DEFAULT "cmake")
+    else()
+        set(SDLNET_INSTALL_CMAKEDIR_ROOT_DEFAULT "${CMAKE_INSTALL_LIBDIR}/cmake")
+    endif()
+    set(SDLNET_INSTALL_CMAKEDIR_ROOT "${SDLNET_INSTALL_CMAKEDIR_ROOT_DEFAULT}" CACHE STRING "Root folder where to install SDL3_netConfig.cmake related files (SDL3_net subfolder for MSVC projects)")
+    set(SDLNET_PKGCONFIG_INSTALLDIR "${CMAKE_INSTALL_LIBDIR}/pkgconfig")
+
+    if(WIN32 AND NOT MINGW)
+        set(SDLNET_INSTALL_CMAKEDIR "${SDLNET_INSTALL_CMAKEDIR_ROOT}")
+        set(LICENSES_PREFIX "licenses/SDL3_net")
+    else()
+        set(SDLNET_INSTALL_CMAKEDIR "${SDLNET_INSTALL_CMAKEDIR_ROOT}/SDL3_net")
+        set(LICENSES_PREFIX "${CMAKE_INSTALL_DATAROOTDIR}/licenses/SDL3_net")
+    endif()
+
+    configure_package_config_file(cmake/SDL3_netConfig.cmake.in SDL3_netConfig.cmake
+        INSTALL_DESTINATION "${SDLNET_INSTALL_CMAKEDIR}"
+    )
+    write_basic_package_version_file("${PROJECT_BINARY_DIR}/SDL3_netConfigVersion.cmake"
+        COMPATIBILITY AnyNewerVersion
+    )
+    install(
+        FILES
+            "${CMAKE_CURRENT_BINARY_DIR}/SDL3_netConfig.cmake"
+            "${CMAKE_CURRENT_BINARY_DIR}/SDL3_netConfigVersion.cmake"
+        DESTINATION "${SDLNET_INSTALL_CMAKEDIR}"
+        COMPONENT devel
+    )
+    install(EXPORT SDL3NetExports
+        FILE ${sdl3_net_target_name}-targets.cmake
+        NAMESPACE SDL3_net::
+        DESTINATION "${SDLNET_INSTALL_CMAKEDIR}"
+        COMPONENT devel
+    )
+
+    if(SDLNET_RELOCATABLE)
+        file(RELATIVE_PATH SDL_PATH_PREFIX_RELATIVE_TO_PKGCONFIG "${CMAKE_INSTALL_PREFIX}/${SDLNET_PKGCONFIG_INSTALLDIR}" "${CMAKE_INSTALL_PREFIX}")
+        string(REGEX REPLACE "[/]+$" "" SDL_PATH_PREFIX_RELATIVE_TO_PKGCONFIG "${SDL_PATH_PREFIX_RELATIVE_TO_PKGCONFIG}")
+        set(SDL_PKGCONFIG_PREFIX "\${pcfiledir}/${SDL_PATH_PREFIX_RELATIVE_TO_PKGCONFIG}")
+    else()
+        set(SDL_PKGCONFIG_PREFIX "${CMAKE_PREFIX_PATH}")
+    endif()
+
+    if(IS_ABSOLUTE "${CMAKE_INSTALL_INCLUDEDIR}")
+        set(INCLUDEDIR_FOR_PKG_CONFIG "${CMAKE_INSTALL_INCLUDEDIR}")
+    else()
+        set(INCLUDEDIR_FOR_PKG_CONFIG "\${prefix}/${CMAKE_INSTALL_INCLUDEDIR}")
+    endif()
+    if(IS_ABSOLUTE "${CMAKE_INSTALL_LIBDIR}")
+        set(LIBDIR_FOR_PKG_CONFIG "${CMAKE_INSTALL_LIBDIR}")
+    else()
+        set(LIBDIR_FOR_PKG_CONFIG "\${prefix}/${CMAKE_INSTALL_LIBDIR}")
+    endif()
+
+    string(JOIN " " PC_REQUIRES ${PC_REQUIRES})
+    string(JOIN " " PC_LIBS ${PC_LIBS})
+    configure_file(cmake/sdl3-net.pc.in sdl3-net.pc @ONLY)
+
+    # Always install sdl3-net.pc file: libraries might be different between config modes
+    install(FILES "${CMAKE_CURRENT_BINARY_DIR}/sdl3-net.pc"
+        DESTINATION "${SDLNET_PKGCONFIG_INSTALLDIR}" COMPONENT devel)
+    if(BUILD_SHARED_LIBS)
+        set(pdbdir "${CMAKE_INSTALL_BINDIR}")
+    else()
+        set(pdbdir "${CMAKE_INSTALL_LIBDIR}")
+    endif()
+    if(MSVC)
+        SDL_install_pdb("${sdl3_net_target_name}" "${pdbdir}")
+    endif()
+
+    install(FILES "LICENSE.txt"
+        DESTINATION "${CMAKE_INSTALL_DATAROOTDIR}/licenses/${PROJECT_NAME}"
+        COMPONENT library
+    )
+
+    export(TARGETS ${sdl3_net_target_name} NAMESPACE "SDL3_net::" FILE "${sdl3_net_target_name}-targets.cmake")
+
+    if(SDLNET_INSTALL_MAN)
+        sdl_get_git_revision_hash(SDLNET_REVISION)
+        SDL_generate_manpages(
+            HEADERS_DIR "${PROJECT_SOURCE_DIR}/include/SDL3_net"
+            SYMBOL "NET_Init"
+            WIKIHEADERS_PL_PATH "${CMAKE_CURRENT_SOURCE_DIR}/build-scripts/wikiheaders.pl"
+            REVISION "${SDLNET_REVISION}"
+        )
+    endif()
+endif()
+
+if(SDLNET_SAMPLES)
+    function(add_sdl_net_example_executable TARGET)
+        if(ANDROID)
+            add_library(${TARGET} SHARED ${ARGN})
+        else()
+            add_executable(${TARGET} ${ARGN})
+        endif()
+        sdl_add_warning_options(${TARGET} WARNING_AS_ERROR ${SDLTTF_WERROR})
+        sdl_target_link_options_no_undefined(${TARGET})
+        target_link_libraries(${TARGET} PRIVATE SDL3_net::${sdl3_net_target_name})
+        target_link_libraries(${TARGET} PRIVATE ${sdl3_target_name})
+        set_property(TARGET ${TARGET} PROPERTY C_STANDARD 99)
+        set_property(TARGET ${TARGET} PROPERTY C_EXTENSIONS FALSE)
+
+        if(SDLNET_SAMPLES_INSTALL)
+            install(TARGETS ${TARGET}
+                RUNTIME DESTINATION "${CMAKE_INSTALL_LIBEXECDIR}/installed-tests/SDL3_net"
+            )
+        endif()
+    endfunction()
+    add_sdl_net_example_executable(voipchat examples/voipchat.c)
+    add_sdl_net_example_executable(simple-http-get examples/simple-http-get.c)
+    add_sdl_net_example_executable(resolve-hostnames examples/resolve-hostnames.c)
+    add_sdl_net_example_executable(get-local-addrs examples/get-local-addrs.c)
+    add_sdl_net_example_executable(echo-server examples/echo-server.c)
+
+    # Build at least one example in C90
+    set_property(TARGET get-local-addrs PROPERTY C_STANDARD 90)
+endif()

Source/3rdParty/SDL_net/LICENSE.txt

@@ -0,0 +1,18 @@
+Copyright (C) 1997-2026 Sam Lantinga <slouken@libsdl.org>
+  
+This software is provided 'as-is', without any express or implied
+warranty.  In no event will the authors be held liable for any damages
+arising from the use of this software.
+
+Permission is granted to anyone to use this software for any purpose,
+including commercial applications, and to alter it and redistribute it
+freely, subject to the following restrictions:
+  
+1. The origin of this software must not be misrepresented; you must not
+   claim that you wrote the original software. If you use this software
+   in a product, an acknowledgment in the product documentation would be
+   appreciated but is not required. 
+2. Altered source versions must be plainly marked as such, and must not be
+   misrepresented as being the original software.
+3. This notice may not be removed or altered from any source distribution.
+

Source/3rdParty/SDL_net/README.md

@@ -0,0 +1,19 @@
+# SDL_net 3.0
+
+The latest version of this library is available from GitHub:
+
+https://github.com/libsdl-org/SDL_net/releases
+
+This is a portable network library for use with SDL. It's goal is to
+simplify the use of the usual socket interfaces and use SDL infrastructure
+to handle some portability things (such as threading and reporting
+errors).
+
+It is available under the zlib license, found in the file LICENSE.txt.
+The API can be found in the file SDL_net.h and online at https://wiki.libsdl.org/SDL3_net
+This library supports most platforms that offer both SDL3 and networking.
+
+This is a work in progress!
+
+Enjoy!
+

Source/3rdParty/SDL_net/VisualC/SDL_net.sln

@@ -0,0 +1,80 @@
+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual Studio 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "SDL3_net", "SDL_net.vcxproj", "{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "get-local-addrs", "examples\get-local-addrs.vcxproj", "{7B1F60CD-2A09-4514-937C-D9DD044428FB}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "resolve-hostnames", "examples\resolve-hostnames.vcxproj", "{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "simple-http-get", "examples\simple-http-get.vcxproj", "{35F14669-ED09-4105-A035-7984B94FDFBC}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "voipchat", "examples\voipchat.vcxproj", "{A01E2216-139A-480E-8458-03CB4E90FE61}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "echo-server", "examples\echo-server.vcxproj", "{DFDBDF0E-87C3-4421-B6D1-90B2C5C28C2B}"
+EndProject
+Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "examples", "examples", "{642C114F-3ABE-4CFE-8C08-8CC5EF0D2324}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Win32 = Debug|Win32
+		Debug|x64 = Debug|x64
+		Release|Win32 = Release|Win32
+		Release|x64 = Release|x64
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Debug|Win32.ActiveCfg = Debug|Win32
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Debug|Win32.Build.0 = Debug|Win32
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Debug|x64.ActiveCfg = Debug|x64
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Debug|x64.Build.0 = Debug|x64
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Release|Win32.ActiveCfg = Release|Win32
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Release|Win32.Build.0 = Release|Win32
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Release|x64.ActiveCfg = Release|x64
+		{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}.Release|x64.Build.0 = Release|x64
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Debug|Win32.ActiveCfg = Debug|Win32
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Debug|Win32.Build.0 = Debug|Win32
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Debug|x64.ActiveCfg = Debug|x64
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Debug|x64.Build.0 = Debug|x64
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Release|Win32.ActiveCfg = Release|Win32
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Release|Win32.Build.0 = Release|Win32
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Release|x64.ActiveCfg = Release|x64
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB}.Release|x64.Build.0 = Release|x64
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Debug|Win32.ActiveCfg = Debug|Win32
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Debug|Win32.Build.0 = Debug|Win32
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Debug|x64.ActiveCfg = Debug|x64
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Debug|x64.Build.0 = Debug|x64
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Release|Win32.ActiveCfg = Release|Win32
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Release|Win32.Build.0 = Release|Win32
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Release|x64.ActiveCfg = Release|x64
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}.Release|x64.Build.0 = Release|x64
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Debug|Win32.ActiveCfg = Debug|Win32
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Debug|Win32.Build.0 = Debug|Win32
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Debug|x64.ActiveCfg = Debug|x64
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Debug|x64.Build.0 = Debug|x64
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Release|Win32.ActiveCfg = Release|Win32
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Release|Win32.Build.0 = Release|Win32
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Release|x64.ActiveCfg = Release|x64
+		{35F14669-ED09-4105-A035-7984B94FDFBC}.Release|x64.Build.0 = Release|x64
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Debug|Win32.ActiveCfg = Debug|Win32
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Debug|Win32.Build.0 = Debug|Win32
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Debug|x64.ActiveCfg = Debug|x64
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Debug|x64.Build.0 = Debug|x64
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Release|Win32.ActiveCfg = Release|Win32
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Release|Win32.Build.0 = Release|Win32
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Release|x64.ActiveCfg = Release|x64
+		{A01E2216-139A-480E-8458-03CB4E90FE61}.Release|x64.Build.0 = Release|x64
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(NestedProjects) = preSolution
+		{7B1F60CD-2A09-4514-937C-D9DD044428FB} = {642C114F-3ABE-4CFE-8C08-8CC5EF0D2324}
+		{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A} = {642C114F-3ABE-4CFE-8C08-8CC5EF0D2324}
+		{35F14669-ED09-4105-A035-7984B94FDFBC} = {642C114F-3ABE-4CFE-8C08-8CC5EF0D2324}
+		{A01E2216-139A-480E-8458-03CB4E90FE61} = {642C114F-3ABE-4CFE-8C08-8CC5EF0D2324}
+		{DFDBDF0E-87C3-4421-B6D1-90B2C5C28C2B} = {642C114F-3ABE-4CFE-8C08-8CC5EF0D2324}
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {F2325A01-6A77-410B-B0DA-E0F6B9313F15}
+	EndGlobalSection
+EndGlobal

Source/3rdParty/SDL_net/VisualC/SDL_net.vcxproj

@@ -0,0 +1,210 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectName>SDL3_net</ProjectName>
+    <ProjectGuid>{8AB3504F-5E58-4910-AFE8-7A1E595AC3F4}</ProjectGuid>
+    <RootNamespace>SDL_net</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>DynamicLibrary</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.40219.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <IncludePath>$(ProjectDir)..\..\SDL\include;$(ProjectDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(ProjectDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <IncludePath>$(ProjectDir)..\..\SDL\include;$(ProjectDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(ProjectDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <IncludePath>$(ProjectDir)..\..\SDL\include;$(ProjectDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(ProjectDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <IncludePath>$(ProjectDir)..\..\SDL\include;$(ProjectDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(ProjectDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Debug/SDL3_net.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>DLL_EXPORT;WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+      <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ResourceCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;iphlpapi.lib;SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Debug/SDL3_net.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>DLL_EXPORT;WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+      <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ResourceCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;iphlpapi.lib;SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Release/SDL3_net.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>DLL_EXPORT;WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ResourceCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;iphlpapi.lib;SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+    <Bscmake />
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Release/SDL3_net.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>DLL_EXPORT;WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ResourceCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <AdditionalDependencies>ws2_32.lib;iphlpapi.lib;SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\src\SDL_net.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="..\include\SDL3_net/SDL_net.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ResourceCompile Include="..\src\version.rc">
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <PreprocessorDefinitions Condition="'$(Configuration)|$(Platform)'=='Release|x64'">%(PreprocessorDefinitions)</PreprocessorDefinitions>
+    </ResourceCompile>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

Source/3rdParty/SDL_net/VisualC/SDL_net.vcxproj.filters

@@ -0,0 +1,26 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Sources">
+      <UniqueIdentifier>{2cc01156-0219-4532-b5cc-4deb572c8d16}</UniqueIdentifier>
+    </Filter>
+    <Filter Include="Public Headers">
+      <UniqueIdentifier>{64a63be2-c42b-4b99-a06a-61d4cc4efa21}</UniqueIdentifier>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\src\SDL_net.c">
+      <Filter>Sources</Filter>
+    </ClCompile>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="..\include\SDL3_net/SDL_net.h">
+      <Filter>Public Headers</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ResourceCompile Include="..\src\version.rc">
+      <Filter>Sources</Filter>
+    </ResourceCompile>
+  </ItemGroup>
+</Project>

Source/3rdParty/SDL_net/VisualC/clean.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+find . -type f \( -name '*.user' -o -name '*.sdf' -o -name '*.ncb' -o -name '*.suo' \) -print -delete
+rm -rvf Win32 */Win32 x64 */x64

Source/3rdParty/SDL_net/VisualC/examples/echo-server.vcxproj

@@ -0,0 +1,238 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{DFDBDF0E-87C3-4421-B6D1-90B2C5C28C2B}</ProjectGuid>
+    <RootNamespace>echo-server</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.40219.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\examples\echo-server.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\SDL_net.vcxproj">
+      <Project>{8ab3504f-5e58-4910-afe8-7a1e595ac3f4}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

Source/3rdParty/SDL_net/VisualC/examples/get-local-addrs.vcxproj

@@ -0,0 +1,238 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{7B1F60CD-2A09-4514-937C-D9DD044428FB}</ProjectGuid>
+    <RootNamespace>get-local-addrs</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.40219.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\examples\get-local-addrs.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\SDL_net.vcxproj">
+      <Project>{8ab3504f-5e58-4910-afe8-7a1e595ac3f4}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

Source/3rdParty/SDL_net/VisualC/examples/resolve-hostnames.vcxproj

@@ -0,0 +1,238 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{8DAC2820-128D-4FAF-9416-A8AD4C6D7A9A}</ProjectGuid>
+    <RootNamespace>resolve-hostnames</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.40219.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\examples\resolve-hostnames.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\SDL_net.vcxproj">
+      <Project>{8ab3504f-5e58-4910-afe8-7a1e595ac3f4}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

Source/3rdParty/SDL_net/VisualC/examples/simple-http-get.vcxproj

@@ -0,0 +1,238 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{35F14669-ED09-4105-A035-7984B94FDFBC}</ProjectGuid>
+    <RootNamespace>simple-http-get</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.40219.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\examples\simple-http-get.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\SDL_net.vcxproj">
+      <Project>{8ab3504f-5e58-4910-afe8-7a1e595ac3f4}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

Source/3rdParty/SDL_net/VisualC/examples/voipchat.vcxproj

@@ -0,0 +1,238 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{A01E2216-139A-480E-8458-03CB4E90FE61}</ProjectGuid>
+    <RootNamespace>voipchat</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <PlatformToolset Condition="'$(VisualStudioVersion)' != '10.0'">$(DefaultPlatformToolset)</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+    <Import Project="$(VCTargetsPath)Microsoft.CPP.UpgradeFromVC60.props" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.40219.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Platform)\$(Configuration)\</IntDir>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(SolutionDir)\$(Platform)\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">$(Platform)\$(Configuration)\</IntDir>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <IncludePath>$(SolutionDir)..\..\SDL\include;$(SolutionDir)..\include;$(IncludePath)</IncludePath>
+    <LibraryPath>$(SolutionDir)..\..\SDL\VisualC\$(PlatformName)\$(Configuration);$(LibraryPath)</LibraryPath>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Release/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>NDEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>Win32</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MkTypLibCompatible>true</MkTypLibCompatible>
+      <SuppressStartupBanner>true</SuppressStartupBanner>
+      <TargetEnvironment>X64</TargetEnvironment>
+      <TypeLibraryName>.\Debug/showinterfaces.tlb</TypeLibraryName>
+      <HeaderFileName>
+      </HeaderFileName>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>OldStyle</DebugInformationFormat>
+    </ClCompile>
+    <ResourceCompile>
+      <PreprocessorDefinitions>_DEBUG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <Culture>0x0409</Culture>
+    </ResourceCompile>
+    <Link>
+      <AdditionalDependencies>SDL3.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+    </Link>
+    <PostBuildEvent>
+      <Message>
+      </Message>
+      <Command>
+      </Command>
+    </PostBuildEvent>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\examples\voipchat.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\SDL_net.vcxproj">
+      <Project>{8ab3504f-5e58-4910-afe8-7a1e595ac3f4}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

Source/3rdParty/SDL_net/Xcode/Info-Framework.plist

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>CFBundleDevelopmentRegion</key>
+	<string>English</string>
+	<key>CFBundleExecutable</key>
+	<string>SDL3_net</string>
+	<key>CFBundleIdentifier</key>
+	<string>org.libsdl.SDL3-net</string>
+	<key>CFBundleInfoDictionaryVersion</key>
+	<string>6.0</string>
+	<key>CFBundleName</key>
+	<string>SDL3_net</string>
+	<key>CFBundlePackageType</key>
+	<string>FMWK</string>
+	<key>CFBundleShortVersionString</key>
+	<string>3.0.0</string>
+	<key>CFBundleVersion</key>
+	<string>3.0.0</string>
+</dict>
+</plist>

Source/3rdParty/SDL_net/Xcode/SDL_net.xcodeproj/project.pbxproj

@@ -0,0 +1,537 @@
+// !$*UTF8*$!
+{
+	archiveVersion = 1;
+	classes = {
+	};
+	objectVersion = 55;
+	objects = {
+
+/* Begin PBXAggregateTarget section */
+		F3B38D1E296F730C005DA6D3 /* SDL3_net.xcframework */ = {
+			isa = PBXAggregateTarget;
+			buildConfigurationList = F3B38D1F296F730C005DA6D3 /* Build configuration list for PBXAggregateTarget "SDL3_net.xcframework" */;
+			buildPhases = (
+				F3B38D22296F7329005DA6D3 /* ShellScript */,
+			);
+			dependencies = (
+			);
+			name = SDL3_net.xcframework;
+			productName = xcFramework;
+		};
+		F3E1F74A2A789BFE00AC76D3 /* SDL3_net.dmg */ = {
+			isa = PBXAggregateTarget;
+			buildConfigurationList = F3E1F74B2A789BFF00AC76D3 /* Build configuration list for PBXAggregateTarget "SDL3_net.dmg" */;
+			buildPhases = (
+				F3E1F74E2A789C1000AC76D3 /* ShellScript */,
+			);
+			dependencies = (
+				F3E1F7502A789C2B00AC76D3 /* PBXTargetDependency */,
+			);
+			name = SDL3_net.dmg;
+			productName = "Create DMG";
+		};
+/* End PBXAggregateTarget section */
+
+/* Begin PBXBuildFile section */
+		AA92857F2EDB8FB20005200A /* SDL_net.c in Sources */ = {isa = PBXBuildFile; fileRef = AA92857E2EDB8FB20005200A /* SDL_net.c */; };
+		AADBAC89175C6B4C004F8ED2 /* ApplicationServices.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 007288A60F0DA79800C302A9 /* ApplicationServices.framework */; platformFilters = (macos, ); };
+		AADBAC8A175C6B4F004F8ED2 /* Foundation.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 61F85449145A19BC002CA294 /* Foundation.framework */; };
+		BE1FA71A07AF4C44004B6283 /* SDL_net.h in Headers */ = {isa = PBXBuildFile; fileRef = 1014BAEA010A4B677F000001 /* SDL_net.h */; settings = {ATTRIBUTES = (Public, ); }; };
+		F34123C02D41A75D00D6C2B7 /* INSTALL.md in Resources */ = {isa = PBXBuildFile; fileRef = F34123BF2D41A75D00D6C2B7 /* INSTALL.md */; };
+		F34123C42D41A79D00D6C2B7 /* LICENSE.txt in Resources */ = {isa = PBXBuildFile; fileRef = F34123C32D41A79D00D6C2B7 /* LICENSE.txt */; };
+		F34123C62D41A7D800D6C2B7 /* README.md in Resources */ = {isa = PBXBuildFile; fileRef = F34123C52D41A7D800D6C2B7 /* README.md */; };
+		F34126942D4B3D6900D6C2B7 /* SDL3.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = F34126932D4B3D6900D6C2B7 /* SDL3.framework */; };
+		F382070E284EF58C004DD584 /* CMake in Resources */ = {isa = PBXBuildFile; fileRef = F3820707284EF58C004DD584 /* CMake */; };
+		F3E1AAEB281CBABD00740E39 /* CoreGraphics.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = F3E1AAEA281CBABD00740E39 /* CoreGraphics.framework */; platformFilters = (ios, tvos, xros, ); };
+		F3E1AAEC281CBB1F00740E39 /* ImageIO.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = F3E1AAE8281CBA7B00740E39 /* ImageIO.framework */; platformFilters = (ios, tvos, xros, ); };
+		F3E1AAEE281CBD9F00740E39 /* UIKit.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = F3E1AAED281CBD9F00740E39 /* UIKit.framework */; platformFilters = (ios, tvos, xros, ); };
+		F3E1AAF0281CBDD100740E39 /* MobileCoreServices.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = F3E1AAEF281CBDD100740E39 /* MobileCoreServices.framework */; platformFilters = (ios, tvos, xros, ); };
+/* End PBXBuildFile section */
+
+/* Begin PBXContainerItemProxy section */
+		F3E1F74F2A789C2B00AC76D3 /* PBXContainerItemProxy */ = {
+			isa = PBXContainerItemProxy;
+			containerPortal = 0867D690FE84028FC02AAC07 /* Project object */;
+			proxyType = 1;
+			remoteGlobalIDString = F3B38D1E296F730C005DA6D3;
+			remoteInfo = SDL_net.xcframework;
+		};
+/* End PBXContainerItemProxy section */
+
+/* Begin PBXFileReference section */
+		007288A60F0DA79800C302A9 /* ApplicationServices.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = ApplicationServices.framework; path = /System/Library/Frameworks/ApplicationServices.framework; sourceTree = "<absolute>"; };
+		1014BAEA010A4B677F000001 /* SDL_net.h */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = sourcecode.c.h; name = SDL_net.h; path = ../include/SDL3_net/SDL_net.h; sourceTree = SOURCE_ROOT; };
+		61F85449145A19BC002CA294 /* Foundation.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = Foundation.framework; path = System/Library/Frameworks/Foundation.framework; sourceTree = SDKROOT; };
+		AA92857E2EDB8FB20005200A /* SDL_net.c */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.c.c; name = SDL_net.c; path = ../src/SDL_net.c; sourceTree = SOURCE_ROOT; };
+		BE1FA72D07AF4C44004B6283 /* Info-Framework.plist */ = {isa = PBXFileReference; lastKnownFileType = text.plist.xml; path = "Info-Framework.plist"; sourceTree = "<group>"; };
+		BE1FA72E07AF4C45004B6283 /* SDL3_net.framework */ = {isa = PBXFileReference; explicitFileType = wrapper.framework; includeInIndex = 0; path = SDL3_net.framework; sourceTree = BUILT_PRODUCTS_DIR; };
+		F34123BF2D41A75D00D6C2B7 /* INSTALL.md */ = {isa = PBXFileReference; lastKnownFileType = net.daringfireball.markdown; path = INSTALL.md; sourceTree = "<group>"; };
+		F34123C32D41A79D00D6C2B7 /* LICENSE.txt */ = {isa = PBXFileReference; lastKnownFileType = text; name = LICENSE.txt; path = ../../../LICENSE.txt; sourceTree = "<group>"; };
+		F34123C52D41A7D800D6C2B7 /* README.md */ = {isa = PBXFileReference; lastKnownFileType = net.daringfireball.markdown; name = README.md; path = ../../../README.md; sourceTree = "<group>"; };
+		F34123C72D41A7F900D6C2B7 /* INSTALL.md */ = {isa = PBXFileReference; lastKnownFileType = net.daringfireball.markdown; path = INSTALL.md; sourceTree = "<group>"; };
+		F34126932D4B3D6900D6C2B7 /* SDL3.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = SDL3.framework; path = macOS/SDL3.framework; sourceTree = "<group>"; };
+		F3547625282AE1C6007E9EDA /* config.xcconfig */ = {isa = PBXFileReference; lastKnownFileType = text.xcconfig; path = config.xcconfig; sourceTree = "<group>"; };
+		F3820707284EF58C004DD584 /* CMake */ = {isa = PBXFileReference; lastKnownFileType = folder; path = CMake; sourceTree = "<group>"; };
+		F3E1AAE8281CBA7B00740E39 /* ImageIO.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = ImageIO.framework; path = System/Library/Frameworks/ImageIO.framework; sourceTree = SDKROOT; };
+		F3E1AAEA281CBABD00740E39 /* CoreGraphics.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = CoreGraphics.framework; path = System/Library/Frameworks/CoreGraphics.framework; sourceTree = SDKROOT; };
+		F3E1AAED281CBD9F00740E39 /* UIKit.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = UIKit.framework; path = Platforms/MacOSX.platform/Developer/SDKs/MacOSX12.3.sdk/System/iOSSupport/System/Library/Frameworks/UIKit.framework; sourceTree = DEVELOPER_DIR; };
+		F3E1AAEF281CBDD100740E39 /* MobileCoreServices.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = MobileCoreServices.framework; path = System/iOSSupport/System/Library/Frameworks/MobileCoreServices.framework; sourceTree = SDKROOT; };
+/* End PBXFileReference section */
+
+/* Begin PBXFrameworksBuildPhase section */
+		BE1FA72A07AF4C44004B6283 /* Frameworks */ = {
+			isa = PBXFrameworksBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				F34126942D4B3D6900D6C2B7 /* SDL3.framework in Frameworks */,
+				AADBAC89175C6B4C004F8ED2 /* ApplicationServices.framework in Frameworks */,
+				F3E1AAEB281CBABD00740E39 /* CoreGraphics.framework in Frameworks */,
+				AADBAC8A175C6B4F004F8ED2 /* Foundation.framework in Frameworks */,
+				F3E1AAEC281CBB1F00740E39 /* ImageIO.framework in Frameworks */,
+				F3E1AAF0281CBDD100740E39 /* MobileCoreServices.framework in Frameworks */,
+				F3E1AAEE281CBD9F00740E39 /* UIKit.framework in Frameworks */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXFrameworksBuildPhase section */
+
+/* Begin PBXGroup section */
+		0153844A006D81B07F000001 /* Public Headers */ = {
+			isa = PBXGroup;
+			children = (
+				1014BAEA010A4B677F000001 /* SDL_net.h */,
+			);
+			name = "Public Headers";
+			sourceTree = "<group>";
+		};
+		034768DDFF38A45A11DB9C8B /* Products */ = {
+			isa = PBXGroup;
+			children = (
+				BE1FA72E07AF4C45004B6283 /* SDL3_net.framework */,
+			);
+			name = Products;
+			sourceTree = "<group>";
+		};
+		0867D691FE84028FC02AAC07 /* SDL_netFramework */ = {
+			isa = PBXGroup;
+			children = (
+				F3547625282AE1C6007E9EDA /* config.xcconfig */,
+				F59C70FC00D5CB5801000001 /* pkg-support */,
+				0153844A006D81B07F000001 /* Public Headers */,
+				08FB77ACFE841707C02AAC07 /* Library Source */,
+				BE1FA76107AF72F5004B6283 /* Frameworks */,
+				034768DDFF38A45A11DB9C8B /* Products */,
+				BE1FA72D07AF4C44004B6283 /* Info-Framework.plist */,
+			);
+			name = SDL_netFramework;
+			sourceTree = "<group>";
+		};
+		08FB77ACFE841707C02AAC07 /* Library Source */ = {
+			isa = PBXGroup;
+			children = (
+				AA92857E2EDB8FB20005200A /* SDL_net.c */,
+			);
+			name = "Library Source";
+			sourceTree = "<group>";
+		};
+		BE1FA76107AF72F5004B6283 /* Frameworks */ = {
+			isa = PBXGroup;
+			children = (
+				F34126932D4B3D6900D6C2B7 /* SDL3.framework */,
+				007288A60F0DA79800C302A9 /* ApplicationServices.framework */,
+				F3E1AAEA281CBABD00740E39 /* CoreGraphics.framework */,
+				61F85449145A19BC002CA294 /* Foundation.framework */,
+				F3E1AAE8281CBA7B00740E39 /* ImageIO.framework */,
+				F3E1AAEF281CBDD100740E39 /* MobileCoreServices.framework */,
+				F3E1AAED281CBD9F00740E39 /* UIKit.framework */,
+			);
+			name = Frameworks;
+			sourceTree = "<group>";
+		};
+		F34123BE2D41A71500D6C2B7 /* framework */ = {
+			isa = PBXGroup;
+			children = (
+				F34123BF2D41A75D00D6C2B7 /* INSTALL.md */,
+			);
+			path = framework;
+			sourceTree = "<group>";
+		};
+		F59C70FC00D5CB5801000001 /* pkg-support */ = {
+			isa = PBXGroup;
+			children = (
+				F59C710100D5CB5801000001 /* resources */,
+			);
+			path = "pkg-support";
+			sourceTree = SOURCE_ROOT;
+		};
+		F59C710100D5CB5801000001 /* resources */ = {
+			isa = PBXGroup;
+			children = (
+				F34123BE2D41A71500D6C2B7 /* framework */,
+				F3820707284EF58C004DD584 /* CMake */,
+				F34123C32D41A79D00D6C2B7 /* LICENSE.txt */,
+				F34123C52D41A7D800D6C2B7 /* README.md */,
+				F34123C72D41A7F900D6C2B7 /* INSTALL.md */,
+			);
+			path = resources;
+			sourceTree = "<group>";
+		};
+/* End PBXGroup section */
+
+/* Begin PBXHeadersBuildPhase section */
+		BE1FA71907AF4C44004B6283 /* Headers */ = {
+			isa = PBXHeadersBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				BE1FA71A07AF4C44004B6283 /* SDL_net.h in Headers */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXHeadersBuildPhase section */
+
+/* Begin PBXNativeTarget section */
+		BE1FA71807AF4C44004B6283 /* SDL3_net */ = {
+			isa = PBXNativeTarget;
+			buildConfigurationList = 00B7E3AA097EB73D00826121 /* Build configuration list for PBXNativeTarget "SDL3_net" */;
+			buildPhases = (
+				BE1FA71907AF4C44004B6283 /* Headers */,
+				BE1FA71B07AF4C44004B6283 /* Resources */,
+				BE1FA71C07AF4C44004B6283 /* Sources */,
+				BE1FA72A07AF4C44004B6283 /* Frameworks */,
+				BE1FA72B07AF4C44004B6283 /* Rez */,
+			);
+			buildRules = (
+			);
+			comments = "Installed into ~/Library/Frameworks/SDL_net.framework\n\nAdd -framework SDL_net to your linker flags\nAdd ~/Library/Frameworks/SDL_net.framework/Headers to your header search path\nAdd ~/Library/Frameworks to your library search path";
+			dependencies = (
+			);
+			name = SDL3_net;
+			productInstallPath = "@executable_path/../Frameworks";
+			productName = SDL_net;
+			productReference = BE1FA72E07AF4C45004B6283 /* SDL3_net.framework */;
+			productType = "com.apple.product-type.framework";
+		};
+/* End PBXNativeTarget section */
+
+/* Begin PBXProject section */
+		0867D690FE84028FC02AAC07 /* Project object */ = {
+			isa = PBXProject;
+			attributes = {
+				LastUpgradeCheck = 0630;
+				TargetAttributes = {
+					F3B38D1E296F730C005DA6D3 = {
+						CreatedOnToolsVersion = 14.2;
+					};
+					F3E1F74A2A789BFE00AC76D3 = {
+						CreatedOnToolsVersion = 14.3.1;
+					};
+				};
+			};
+			buildConfigurationList = 00B7E3B6097EB73D00826121 /* Build configuration list for PBXProject "SDL_net" */;
+			compatibilityVersion = "Xcode 3.2";
+			developmentRegion = English;
+			hasScannedForEncodings = 1;
+			knownRegions = (
+				English,
+				Japanese,
+				French,
+				German,
+			);
+			mainGroup = 0867D691FE84028FC02AAC07 /* SDL_netFramework */;
+			productRefGroup = 034768DDFF38A45A11DB9C8B /* Products */;
+			projectDirPath = "";
+			projectRoot = ..;
+			targets = (
+				BE1FA71807AF4C44004B6283 /* SDL3_net */,
+				F3B38D1E296F730C005DA6D3 /* SDL3_net.xcframework */,
+				F3E1F74A2A789BFE00AC76D3 /* SDL3_net.dmg */,
+			);
+		};
+/* End PBXProject section */
+
+/* Begin PBXResourcesBuildPhase section */
+		BE1FA71B07AF4C44004B6283 /* Resources */ = {
+			isa = PBXResourcesBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				F34123C42D41A79D00D6C2B7 /* LICENSE.txt in Resources */,
+				F34123C02D41A75D00D6C2B7 /* INSTALL.md in Resources */,
+				F34123C62D41A7D800D6C2B7 /* README.md in Resources */,
+				F382070E284EF58C004DD584 /* CMake in Resources */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXResourcesBuildPhase section */
+
+/* Begin PBXRezBuildPhase section */
+		BE1FA72B07AF4C44004B6283 /* Rez */ = {
+			isa = PBXRezBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXRezBuildPhase section */
+
+/* Begin PBXShellScriptBuildPhase section */
+		F3B38D22296F7329005DA6D3 /* ShellScript */ = {
+			isa = PBXShellScriptBuildPhase;
+			alwaysOutOfDate = 1;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputFileListPaths = (
+			);
+			inputPaths = (
+			);
+			outputFileListPaths = (
+			);
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /bin/sh;
+			shellScript = "# Build an xcframework with both device and simulator files for all platforms.\n# Adapted from an answer in\n# https://developer.apple.com/forums/thread/666335?answerId=685927022#685927022\n\nif [ \"$XCODE_VERSION_ACTUAL\" -lt 1100 ]\nthen\n    echo \"error: Building an xcframework requires Xcode 11 minimum.\"\n    exit 1\nfi\n\nFRAMEWORK_NAME=\"SDL3_net\"\nPROJECT_NAME=\"SDL_net\"\nSCHEME=\"SDL3_net\"\n\nMACOS_ARCHIVE_PATH=\"${BUILD_DIR}/${CONFIGURATION}/${FRAMEWORK_NAME}-macosx.xcarchive\"\nIOS_SIMULATOR_ARCHIVE_PATH=\"${BUILD_DIR}/${CONFIGURATION}/${FRAMEWORK_NAME}-iphonesimulator.xcarchive\"\nIOS_DEVICE_ARCHIVE_PATH=\"${BUILD_DIR}/${CONFIGURATION}/${FRAMEWORK_NAME}-iphoneos.xcarchive\"\nTVOS_SIMULATOR_ARCHIVE_PATH=\"${BUILD_DIR}/${CONFIGURATION}/${FRAMEWORK_NAME}-appletvsimulator.xcarchive\"\nTVOS_DEVICE_ARCHIVE_PATH=\"${BUILD_DIR}/${CONFIGURATION}/${FRAMEWORK_NAME}-appletvos.xcarchive\"\n\nOUTPUT_DIR=\"./build/\"\n\n# macOS\nxcodebuild archive \\\n    ONLY_ACTIVE_ARCH=NO \\\n    -scheme \"${SCHEME}\" \\\n    -project \"${PROJECT_NAME}.xcodeproj\" \\\n    -archivePath ${MACOS_ARCHIVE_PATH} \\\n    -destination 'generic/platform=macOS,name=Any Mac' \\\n    BUILD_LIBRARY_FOR_DISTRIBUTION=YES \\\n    SKIP_INSTALL=NO || exit $?\n    \n# iOS simulator\nxcodebuild archive \\\n    ONLY_ACTIVE_ARCH=NO \\\n    -scheme \"${SCHEME}\" \\\n    -project \"${PROJECT_NAME}.xcodeproj\" \\\n    -archivePath ${IOS_SIMULATOR_ARCHIVE_PATH} \\\n    -destination 'generic/platform=iOS Simulator' \\\n    BUILD_LIBRARY_FOR_DISTRIBUTION=YES \\\n    SKIP_INSTALL=NO || exit $?\n\n# iOS device\nxcodebuild archive \\\n    -scheme \"${SCHEME}\" \\\n    -project \"${PROJECT_NAME}.xcodeproj\" \\\n    -archivePath ${IOS_DEVICE_ARCHIVE_PATH} \\\n    -destination 'generic/platform=iOS' \\\n    BUILD_LIBRARY_FOR_DISTRIBUTION=YES \\\n    SKIP_INSTALL=NO || exit $?\n\n# tvOS simulator\nxcodebuild archive \\\n    ONLY_ACTIVE_ARCH=NO \\\n    -scheme \"${SCHEME}\" \\\n    -project \"${PROJECT_NAME}.xcodeproj\" \\\n    -archivePath ${TVOS_SIMULATOR_ARCHIVE_PATH} \\\n    -destination 'generic/platform=tvOS Simulator' \\\n    BUILD_LIBRARY_FOR_DISTRIBUTION=YES \\\n    SKIP_INSTALL=NO || exit $?\n\n# tvOS device\nxcodebuild archive \\\n    -scheme \"${SCHEME}\" \\\n    -project \"${PROJECT_NAME}.xcodeproj\" \\\n    -archivePath ${TVOS_DEVICE_ARCHIVE_PATH} \\\n    -destination 'generic/platform=tvOS' \\\n    BUILD_LIBRARY_FOR_DISTRIBUTION=YES \\\n    SKIP_INSTALL=NO || exit $?\n\n# Clean-up any existing instance of this xcframework from the Products directory\nrm -rf \"${OUTPUT_DIR}${FRAMEWORK_NAME}.xcframework\"\n\n# Create final xcframework\nxcodebuild -create-xcframework \\\n    -framework \"${MACOS_ARCHIVE_PATH}\"/Products/Library/Frameworks/${FRAMEWORK_NAME}.framework \\\n    -framework \"${IOS_DEVICE_ARCHIVE_PATH}\"/Products/Library/Frameworks/${FRAMEWORK_NAME}.framework \\\n    -framework \"${IOS_SIMULATOR_ARCHIVE_PATH}\"/Products/Library/Frameworks/${FRAMEWORK_NAME}.framework \\\n    -framework \"${TVOS_DEVICE_ARCHIVE_PATH}\"/Products/Library/Frameworks/${FRAMEWORK_NAME}.framework \\\n    -framework \"${TVOS_SIMULATOR_ARCHIVE_PATH}\"/Products/Library/Frameworks/${FRAMEWORK_NAME}.framework \\\n    -output ${OUTPUT_DIR}/${FRAMEWORK_NAME}.xcframework\n\n# Ensure git doesn't pick up on our Products folder. \nrm -rf ${OUTPUT_DIR}/.gitignore\necho \"*\" >> ${OUTPUT_DIR}/.gitignore\n";
+		};
+		F3E1F74E2A789C1000AC76D3 /* ShellScript */ = {
+			isa = PBXShellScriptBuildPhase;
+			alwaysOutOfDate = 1;
+			buildActionMask = 2147483647;
+			files = (
+			);
+			inputFileListPaths = (
+			);
+			inputPaths = (
+			);
+			outputFileListPaths = (
+			);
+			outputPaths = (
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+			shellPath = /bin/sh;
+			shellScript = "set -ex\n\nPRODUCT_NAME=SDL3_net\nOPTIONAL_FRAMEWORKS=\"\"\n\nmkdir -p build/dmg-tmp/share/cmake/$PRODUCT_NAME\ncp -a build/$PRODUCT_NAME.xcframework build/dmg-tmp/\n\ncp ../LICENSE.txt build/dmg-tmp\ncp ../README.md build/dmg-tmp\ncp pkg-support/resources/INSTALL.md build/dmg-tmp\ncp pkg-support/resources/share/cmake/${PRODUCT_NAME}/${PRODUCT_NAME}Config.cmake build/dmg-tmp/share/cmake/${PRODUCT_NAME}\ncp pkg-support/resources/share/cmake/${PRODUCT_NAME}/${PRODUCT_NAME}ConfigVersion.cmake build/dmg-tmp/share/cmake/${PRODUCT_NAME}\nfor i in $OPTIONAL_FRAMEWORKS; do\n    if [ -d build/$i.xcframework ]; then\n        mkdir -p build/dmg-tmp/optional\n        cp -a build/$i.xcframework build/dmg-tmp/optional/\n    fi\ndone\n\n# remove the .DS_Store files if any (we may want to provide one in the future for fancy .dmgs)\nrm -rf build/dmg-tmp/.DS_Store\n\n# for fancy .dmg\nmkdir -p build/dmg-tmp/.logo\ncp pkg-support/resources/SDL_DS_Store build/dmg-tmp/.DS_Store\ncp pkg-support/sdl_logo.pdf build/dmg-tmp/.logo\n\n# create the dmg\nhdiutil create -ov -fs HFS+ -volname $PRODUCT_NAME -srcfolder build/dmg-tmp build/$PRODUCT_NAME.dmg\n\n# clean up\nrm -rf build/dmg-tmp\n";
+		};
+/* End PBXShellScriptBuildPhase section */
+
+/* Begin PBXSourcesBuildPhase section */
+		BE1FA71C07AF4C44004B6283 /* Sources */ = {
+			isa = PBXSourcesBuildPhase;
+			buildActionMask = 2147483647;
+			files = (
+				AA92857F2EDB8FB20005200A /* SDL_net.c in Sources */,
+			);
+			runOnlyForDeploymentPostprocessing = 0;
+		};
+/* End PBXSourcesBuildPhase section */
+
+/* Begin PBXTargetDependency section */
+		F3E1F7502A789C2B00AC76D3 /* PBXTargetDependency */ = {
+			isa = PBXTargetDependency;
+			target = F3B38D1E296F730C005DA6D3 /* SDL3_net.xcframework */;
+			targetProxy = F3E1F74F2A789C2B00AC76D3 /* PBXContainerItemProxy */;
+		};
+/* End PBXTargetDependency section */
+
+/* Begin XCBuildConfiguration section */
+		007288110F0DA5BA00C302A9 /* Debug */ = {
+			isa = XCBuildConfiguration;
+			baseConfigurationReference = F3547625282AE1C6007E9EDA /* config.xcconfig */;
+			buildSettings = {
+				ALLOW_TARGET_PLATFORM_SPECIALIZATION = YES;
+				COPY_PHASE_STRIP = NO;
+				DYLIB_COMPATIBILITY_VERSION = 301.0.0;
+				DYLIB_CURRENT_VERSION = 301.0.0;
+				DYLIB_INSTALL_NAME_BASE = "@rpath";
+				ENABLE_TESTABILITY = YES;
+				"FRAMEWORK_SEARCH_PATHS[sdk=appletv*]" = "\"$(PROJECT_DIR)/iOS\"";
+				"FRAMEWORK_SEARCH_PATHS[sdk=iphone*]" = "\"$(PROJECT_DIR)/iOS\"";
+				"FRAMEWORK_SEARCH_PATHS[sdk=macosx*]" = "\"$(PROJECT_DIR)/macOS\"";
+				"FRAMEWORK_SEARCH_PATHS[sdk=xr*]" = "\"$(PROJECT_DIR)/iOS\"";
+				GCC_OPTIMIZATION_LEVEL = 0;
+				GCC_PREPROCESSOR_DEFINITIONS = (
+					USE_STBIMAGE,
+					LOAD_BMP,
+					LOAD_GIF,
+					LOAD_JPG,
+					LOAD_LBM,
+					LOAD_PCX,
+					LOAD_PNG,
+					LOAD_PNM,
+					LOAD_QOI,
+					LOAD_SVG,
+					LOAD_TGA,
+					LOAD_XCF,
+					LOAD_XPM,
+					LOAD_XV,
+					"$(CONFIG_PREPROCESSOR_DEFINITIONS)",
+				);
+				GCC_SYMBOLS_PRIVATE_EXTERN = YES;
+				HEADER_SEARCH_PATHS = (
+					"\"$(SRCROOT)/../include\"",
+					"\"$(SRCROOT)/../external/jpeg\"",
+					"\"$(PROJECT_DIR)/jxl\"",
+				);
+				INFOPLIST_FILE = "Info-Framework.plist";
+				IPHONEOS_DEPLOYMENT_TARGET = 11.0;
+				LD_RUNPATH_SEARCH_PATHS = (
+					"$(inherited)",
+					"@executable_path/Frameworks",
+					"@loader_path/Frameworks",
+				);
+				"LD_RUNPATH_SEARCH_PATHS[sdk=macosx*]" = (
+					"@executable_path/../Frameworks",
+					"@loader_path/Frameworks",
+				);
+				MACOSX_DEPLOYMENT_TARGET = 10.13;
+				MARKETING_VERSION = 3.3.0;
+				ONLY_ACTIVE_ARCH = YES;
+				PRODUCT_BUNDLE_IDENTIFIER = "org.libsdl.SDL3-net";
+				PRODUCT_NAME = SDL3_net;
+				SUPPORTED_PLATFORMS = "xrsimulator xros macosx iphonesimulator iphoneos driverkit appletvsimulator appletvos";
+				SUPPORTS_MACCATALYST = YES;
+				TVOS_DEPLOYMENT_TARGET = 11.0;
+				XROS_DEPLOYMENT_TARGET = 1.3;
+			};
+			name = Debug;
+		};
+		007288120F0DA5BA00C302A9 /* Debug */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				EXPORTED_SYMBOLS_FILE = "$(SRCROOT)/../src/SDL_net.exports";
+				OTHER_LDFLAGS = "$(CONFIG_FRAMEWORK_LDFLAGS)";
+			};
+			name = Debug;
+		};
+		007288150F0DA5C400C302A9 /* Release */ = {
+			isa = XCBuildConfiguration;
+			baseConfigurationReference = F3547625282AE1C6007E9EDA /* config.xcconfig */;
+			buildSettings = {
+				ALLOW_TARGET_PLATFORM_SPECIALIZATION = YES;
+				DEPLOYMENT_POSTPROCESSING = YES;
+				DYLIB_COMPATIBILITY_VERSION = 301.0.0;
+				DYLIB_CURRENT_VERSION = 301.0.0;
+				DYLIB_INSTALL_NAME_BASE = "@rpath";
+				"FRAMEWORK_SEARCH_PATHS[sdk=appletv*]" = "\"$(PROJECT_DIR)/iOS\"";
+				"FRAMEWORK_SEARCH_PATHS[sdk=iphone*]" = "\"$(PROJECT_DIR)/iOS\"";
+				"FRAMEWORK_SEARCH_PATHS[sdk=macosx*]" = "\"$(PROJECT_DIR)/macOS\"";
+				"FRAMEWORK_SEARCH_PATHS[sdk=xr*]" = "\"$(PROJECT_DIR)/iOS\"";
+				GCC_GENERATE_DEBUGGING_SYMBOLS = NO;
+				GCC_PREPROCESSOR_DEFINITIONS = (
+					USE_STBIMAGE,
+					LOAD_BMP,
+					LOAD_GIF,
+					LOAD_JPG,
+					LOAD_LBM,
+					LOAD_PCX,
+					LOAD_PNG,
+					LOAD_PNM,
+					LOAD_QOI,
+					LOAD_SVG,
+					LOAD_TGA,
+					LOAD_XCF,
+					LOAD_XPM,
+					LOAD_XV,
+					"$(CONFIG_PREPROCESSOR_DEFINITIONS)",
+				);
+				GCC_SYMBOLS_PRIVATE_EXTERN = YES;
+				HEADER_SEARCH_PATHS = (
+					"\"$(SRCROOT)/../include\"",
+					"\"$(SRCROOT)/../external/jpeg\"",
+					"\"$(PROJECT_DIR)/jxl\"",
+				);
+				INFOPLIST_FILE = "Info-Framework.plist";
+				IPHONEOS_DEPLOYMENT_TARGET = 11.0;
+				LD_RUNPATH_SEARCH_PATHS = (
+					"$(inherited)",
+					"@executable_path/Frameworks",
+					"@loader_path/Frameworks",
+				);
+				"LD_RUNPATH_SEARCH_PATHS[sdk=macosx*]" = (
+					"@executable_path/../Frameworks",
+					"@loader_path/Frameworks",
+				);
+				MACOSX_DEPLOYMENT_TARGET = 10.13;
+				MARKETING_VERSION = 3.3.0;
+				PRODUCT_BUNDLE_IDENTIFIER = "org.libsdl.SDL3-net";
+				PRODUCT_NAME = SDL3_net;
+				SUPPORTED_PLATFORMS = "xrsimulator xros macosx iphonesimulator iphoneos driverkit appletvsimulator appletvos";
+				SUPPORTS_MACCATALYST = YES;
+				TVOS_DEPLOYMENT_TARGET = 11.0;
+				XROS_DEPLOYMENT_TARGET = 1.3;
+			};
+			name = Release;
+		};
+		007288160F0DA5C400C302A9 /* Release */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+				EXPORTED_SYMBOLS_FILE = "$(SRCROOT)/../src/SDL_net.exports";
+				OTHER_LDFLAGS = "$(CONFIG_FRAMEWORK_LDFLAGS)";
+			};
+			name = Release;
+		};
+		F3B38D20296F730C005DA6D3 /* Release */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+			};
+			name = Release;
+		};
+		F3B38D21296F730C005DA6D3 /* Debug */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+			};
+			name = Debug;
+		};
+		F3E1F74C2A789BFF00AC76D3 /* Release */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+			};
+			name = Release;
+		};
+		F3E1F74D2A789BFF00AC76D3 /* Debug */ = {
+			isa = XCBuildConfiguration;
+			buildSettings = {
+			};
+			name = Debug;
+		};
+/* End XCBuildConfiguration section */
+
+/* Begin XCConfigurationList section */
+		00B7E3AA097EB73D00826121 /* Build configuration list for PBXNativeTarget "SDL3_net" */ = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				007288160F0DA5C400C302A9 /* Release */,
+				007288120F0DA5BA00C302A9 /* Debug */,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Release;
+		};
+		00B7E3B6097EB73D00826121 /* Build configuration list for PBXProject "SDL_net" */ = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				007288150F0DA5C400C302A9 /* Release */,
+				007288110F0DA5BA00C302A9 /* Debug */,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Release;
+		};
+		F3B38D1F296F730C005DA6D3 /* Build configuration list for PBXAggregateTarget "SDL3_net.xcframework" */ = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				F3B38D20296F730C005DA6D3 /* Release */,
+				F3B38D21296F730C005DA6D3 /* Debug */,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Release;
+		};
+		F3E1F74B2A789BFF00AC76D3 /* Build configuration list for PBXAggregateTarget "SDL3_net.dmg" */ = {
+			isa = XCConfigurationList;
+			buildConfigurations = (
+				F3E1F74C2A789BFF00AC76D3 /* Release */,
+				F3E1F74D2A789BFF00AC76D3 /* Debug */,
+			);
+			defaultConfigurationIsVisible = 0;
+			defaultConfigurationName = Release;
+		};
+/* End XCConfigurationList section */
+	};
+	rootObject = 0867D690FE84028FC02AAC07 /* Project object */;
+}

Source/3rdParty/SDL_net/Xcode/config.xcconfig

@@ -0,0 +1,9 @@
+//
+//  config.xcconfig
+//
+
+// Configuration settings file format documentation can be found at:
+// https://help.apple.com/xcode/#/dev745c5c974
+
+// Include any optional config for this build
+#include? "build.xcconfig"

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL.h

@@ -0,0 +1,91 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * Main include header for the SDL library, version 3.3.0
+ *
+ * It is almost always best to include just this one header instead of
+ * picking out individual headers included here. There are exceptions to
+ * this rule--SDL_main.h is special and not included here--but usually
+ * letting SDL.h include the kitchen sink for you is the correct approach.
+ */
+
+#ifndef SDL_h_
+#define SDL_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_assert.h>
+#include <SDL3/SDL_asyncio.h>
+#include <SDL3/SDL_atomic.h>
+#include <SDL3/SDL_audio.h>
+#include <SDL3/SDL_bits.h>
+#include <SDL3/SDL_blendmode.h>
+#include <SDL3/SDL_camera.h>
+#include <SDL3/SDL_clipboard.h>
+#include <SDL3/SDL_cpuinfo.h>
+#include <SDL3/SDL_dialog.h>
+#include <SDL3/SDL_dlopennote.h>
+#include <SDL3/SDL_endian.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_events.h>
+#include <SDL3/SDL_filesystem.h>
+#include <SDL3/SDL_gamepad.h>
+#include <SDL3/SDL_gpu.h>
+#include <SDL3/SDL_guid.h>
+#include <SDL3/SDL_haptic.h>
+#include <SDL3/SDL_hidapi.h>
+#include <SDL3/SDL_hints.h>
+#include <SDL3/SDL_init.h>
+#include <SDL3/SDL_iostream.h>
+#include <SDL3/SDL_joystick.h>
+#include <SDL3/SDL_keyboard.h>
+#include <SDL3/SDL_keycode.h>
+#include <SDL3/SDL_loadso.h>
+#include <SDL3/SDL_locale.h>
+#include <SDL3/SDL_log.h>
+#include <SDL3/SDL_messagebox.h>
+#include <SDL3/SDL_metal.h>
+#include <SDL3/SDL_misc.h>
+#include <SDL3/SDL_mouse.h>
+#include <SDL3/SDL_mutex.h>
+#include <SDL3/SDL_pen.h>
+#include <SDL3/SDL_pixels.h>
+#include <SDL3/SDL_platform.h>
+#include <SDL3/SDL_power.h>
+#include <SDL3/SDL_process.h>
+#include <SDL3/SDL_properties.h>
+#include <SDL3/SDL_rect.h>
+#include <SDL3/SDL_render.h>
+#include <SDL3/SDL_scancode.h>
+#include <SDL3/SDL_sensor.h>
+#include <SDL3/SDL_storage.h>
+#include <SDL3/SDL_surface.h>
+#include <SDL3/SDL_system.h>
+#include <SDL3/SDL_thread.h>
+#include <SDL3/SDL_time.h>
+#include <SDL3/SDL_timer.h>
+#include <SDL3/SDL_tray.h>
+#include <SDL3/SDL_touch.h>
+#include <SDL3/SDL_version.h>
+#include <SDL3/SDL_video.h>
+#include <SDL3/SDL_oldnames.h>
+
+#endif /* SDL_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_assert.h

@@ -0,0 +1,659 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryAssert
+ *
+ * A helpful assertion macro!
+ *
+ * SDL assertions operate like your usual `assert` macro, but with some added
+ * features:
+ *
+ * - It uses a trick with the `sizeof` operator, so disabled assertions
+ *   vaporize out of the compiled code, but variables only referenced in the
+ *   assertion won't trigger compiler warnings about being unused.
+ * - It is safe to use with a dangling-else: `if (x) SDL_assert(y); else
+ *   do_something();`
+ * - It works the same everywhere, instead of counting on various platforms'
+ *   compiler and C runtime to behave.
+ * - It provides multiple levels of assertion (SDL_assert, SDL_assert_release,
+ *   SDL_assert_paranoid) instead of a single all-or-nothing option.
+ * - It offers a variety of responses when an assertion fails (retry, trigger
+ *   the debugger, abort the program, ignore the failure once, ignore it for
+ *   the rest of the program's run).
+ * - It tries to show the user a dialog by default, if possible, but the app
+ *   can provide a callback to handle assertion failures however they like.
+ * - It lets failed assertions be retried. Perhaps you had a network failure
+ *   and just want to retry the test after plugging your network cable back
+ *   in? You can.
+ * - It lets the user ignore an assertion failure, if there's a harmless
+ *   problem that one can continue past.
+ * - It lets the user mark an assertion as ignored for the rest of the
+ *   program's run; if there's a harmless problem that keeps popping up.
+ * - It provides statistics and data on all failed assertions to the app.
+ * - It allows the default assertion handler to be controlled with environment
+ *   variables, in case an automated script needs to control it.
+ * - It can be used as an aid to Clang's static analysis; it will treat SDL
+ *   assertions as universally true (under the assumption that you are serious
+ *   about the asserted claims and that your debug builds will detect when
+ *   these claims were wrong). This can help the analyzer avoid false
+ *   positives.
+ *
+ * To use it: compile a debug build and just sprinkle around tests to check
+ * your code!
+ */
+
+#ifndef SDL_assert_h_
+#define SDL_assert_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * The level of assertion aggressiveness.
+ *
+ * This value changes depending on compiler options and other preprocessor
+ * defines.
+ *
+ * It is currently one of the following values, but future SDL releases might
+ * add more:
+ *
+ * - 0: All SDL assertion macros are disabled.
+ * - 1: Release settings: SDL_assert disabled, SDL_assert_release enabled.
+ * - 2: Debug settings: SDL_assert and SDL_assert_release enabled.
+ * - 3: Paranoid settings: All SDL assertion macros enabled, including
+ *   SDL_assert_paranoid.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_ASSERT_LEVEL SomeNumberBasedOnVariousFactors
+
+#elif !defined(SDL_ASSERT_LEVEL)
+#ifdef SDL_DEFAULT_ASSERT_LEVEL
+#define SDL_ASSERT_LEVEL SDL_DEFAULT_ASSERT_LEVEL
+#elif defined(_DEBUG) || defined(DEBUG) || \
+      (defined(__GNUC__) && !defined(__OPTIMIZE__))
+#define SDL_ASSERT_LEVEL 2
+#else
+#define SDL_ASSERT_LEVEL 1
+#endif
+#endif
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * Attempt to tell an attached debugger to pause.
+ *
+ * This allows an app to programmatically halt ("break") the debugger as if it
+ * had hit a breakpoint, allowing the developer to examine program state, etc.
+ *
+ * This is a macro--not a function--so that the debugger breaks on the source
+ * code line that used SDL_TriggerBreakpoint and not in some random guts of
+ * SDL. SDL_assert uses this macro for the same reason.
+ *
+ * If the program is not running under a debugger, SDL_TriggerBreakpoint will
+ * likely terminate the app, possibly without warning. If the current platform
+ * isn't supported, this macro is left undefined.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_TriggerBreakpoint() TriggerABreakpointInAPlatformSpecificManner
+
+#elif defined(__MINGW32__) || (defined(_MSC_VER) && _MSC_VER >= 1310)
+    /* Don't include intrin.h here because it contains C++ code */
+    extern void __cdecl __debugbreak(void);
+    #define SDL_TriggerBreakpoint() __debugbreak()
+#elif defined(_MSC_VER) && defined(_M_IX86)
+    #define SDL_TriggerBreakpoint() { _asm { int 0x03 }  }
+#elif SDL_HAS_BUILTIN(__builtin_debugtrap)
+    #define SDL_TriggerBreakpoint() __builtin_debugtrap()
+#elif SDL_HAS_BUILTIN(__builtin_trap)
+    #define SDL_TriggerBreakpoint() __builtin_trap()
+#elif (defined(__GNUC__) || defined(__clang__)) && (defined(__i386__) || defined(__x86_64__))
+    #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "int $3\n\t" )
+#elif (defined(__GNUC__) || defined(__clang__)) && defined(__riscv)
+    #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "ebreak\n\t" )
+#elif ( defined(SDL_PLATFORM_APPLE) && (defined(__arm64__) || defined(__aarch64__)) )  /* this might work on other ARM targets, but this is a known quantity... */
+    #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "brk #22\n\t" )
+#elif defined(SDL_PLATFORM_APPLE) && defined(__arm__)
+    #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "bkpt #22\n\t" )
+#elif defined(_WIN32) && ((defined(__GNUC__) || defined(__clang__)) && (defined(__arm64__) || defined(__aarch64__)) )
+    #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "brk #0xF000\n\t" )
+#elif defined(__GNUC__) || defined(__clang__)
+    #define SDL_TriggerBreakpoint() __builtin_trap()  /* older gcc may not support SDL_HAS_BUILTIN(__builtin_trap) above */
+#elif defined(__386__) && defined(__WATCOMC__)
+    #define SDL_TriggerBreakpoint() { _asm { int 0x03 } }
+#elif defined(HAVE_SIGNAL_H) && !defined(__WATCOMC__)
+    #include <signal.h>
+    #define SDL_TriggerBreakpoint() raise(SIGTRAP)
+#else
+    /* SDL_TriggerBreakpoint is intentionally left undefined on unknown platforms. */
+#endif
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro that reports the current function being compiled.
+ *
+ * If SDL can't figure how the compiler reports this, it will use "???".
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_FUNCTION __FUNCTION__
+
+#elif defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 supports __func__ as a standard. */
+#   define SDL_FUNCTION __func__
+#elif ((defined(__GNUC__) && (__GNUC__ >= 2)) || defined(_MSC_VER) || defined (__WATCOMC__))
+#   define SDL_FUNCTION __FUNCTION__
+#else
+#   define SDL_FUNCTION "???"
+#endif
+
+/**
+ * A macro that reports the current file being compiled.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_FILE    __FILE__
+
+/**
+ * A macro that reports the current line number of the file being compiled.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_LINE    __LINE__
+
+/*
+sizeof (x) makes the compiler still parse the expression even without
+assertions enabled, so the code is always checked at compile time, but
+doesn't actually generate code for it, so there are no side effects or
+expensive checks at run time, just the constant size of what x WOULD be,
+which presumably gets optimized out as unused.
+This also solves the problem of...
+
+    int somevalue = blah();
+    SDL_assert(somevalue == 1);
+
+...which would cause compiles to complain that somevalue is unused if we
+disable assertions.
+*/
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro for wrapping code in `do {} while (0);` without compiler warnings.
+ *
+ * Visual Studio with really aggressive warnings enabled needs this to avoid
+ * compiler complaints.
+ *
+ * the `do {} while (0);` trick is useful for wrapping code in a macro that
+ * may or may not be a single statement, to avoid various C language
+ * accidents.
+ *
+ * To use:
+ *
+ * ```c
+ * do { SomethingOnce(); } while (SDL_NULL_WHILE_LOOP_CONDITION (0));
+ * ```
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_NULL_WHILE_LOOP_CONDITION (0)
+
+#elif defined(_MSC_VER)  /* Avoid /W4 warnings. */
+/* "while (0,0)" fools Microsoft's compiler's /W4 warning level into thinking
+    this condition isn't constant. And looks like an owl's face! */
+#define SDL_NULL_WHILE_LOOP_CONDITION (0,0)
+#else
+#define SDL_NULL_WHILE_LOOP_CONDITION (0)
+#endif
+
+/**
+ * The macro used when an assertion is disabled.
+ *
+ * This isn't for direct use by apps, but this is the code that is inserted
+ * when an SDL_assert is disabled (perhaps in a release build).
+ *
+ * The code does nothing, but wraps `condition` in a sizeof operator, which
+ * generates no code and has no side effects, but avoid compiler warnings
+ * about unused variables.
+ *
+ * \param condition the condition to assert (but not actually run here).
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_disabled_assert(condition) \
+    do { (void) sizeof ((condition)); } while (SDL_NULL_WHILE_LOOP_CONDITION)
+
+/**
+ * Possible outcomes from a triggered assertion.
+ *
+ * When an enabled assertion triggers, it may call the assertion handler
+ * (possibly one provided by the app via SDL_SetAssertionHandler), which will
+ * return one of these values, possibly after asking the user.
+ *
+ * Then SDL will respond based on this outcome (loop around to retry the
+ * condition, try to break in a debugger, kill the program, or ignore the
+ * problem).
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_AssertState
+{
+    SDL_ASSERTION_RETRY,  /**< Retry the assert immediately. */
+    SDL_ASSERTION_BREAK,  /**< Make the debugger trigger a breakpoint. */
+    SDL_ASSERTION_ABORT,  /**< Terminate the program. */
+    SDL_ASSERTION_IGNORE,  /**< Ignore the assert. */
+    SDL_ASSERTION_ALWAYS_IGNORE  /**< Ignore the assert from now on. */
+} SDL_AssertState;
+
+/**
+ * Information about an assertion failure.
+ *
+ * This structure is filled in with information about a triggered assertion,
+ * used by the assertion handler, then added to the assertion report. This is
+ * returned as a linked list from SDL_GetAssertionReport().
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_AssertData
+{
+    bool always_ignore;  /**< true if app should always continue when assertion is triggered. */
+    unsigned int trigger_count; /**< Number of times this assertion has been triggered. */
+    const char *condition;  /**< A string of this assert's test code. */
+    const char *filename;  /**< The source file where this assert lives. */
+    int linenum;  /**< The line in `filename` where this assert lives. */
+    const char *function;  /**< The name of the function where this assert lives. */
+    const struct SDL_AssertData *next;  /**< next item in the linked list. */
+} SDL_AssertData;
+
+/**
+ * Never call this directly.
+ *
+ * Use the SDL_assert macros instead.
+ *
+ * \param data assert data structure.
+ * \param func function name.
+ * \param file file name.
+ * \param line line number.
+ * \returns assert state.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC SDL_AssertState SDLCALL SDL_ReportAssertion(SDL_AssertData *data,
+                                                            const char *func,
+                                                            const char *file, int line) SDL_ANALYZER_NORETURN;
+
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * The macro used when an assertion triggers a breakpoint.
+ *
+ * This isn't for direct use by apps; use SDL_assert or SDL_TriggerBreakpoint
+ * instead.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_AssertBreakpoint() SDL_TriggerBreakpoint()
+
+#elif !defined(SDL_AssertBreakpoint)
+#  if defined(ANDROID) && defined(assert)
+     /* Define this as empty in case assert() is defined as SDL_assert */
+#    define SDL_AssertBreakpoint()
+#  else
+#    define SDL_AssertBreakpoint() SDL_TriggerBreakpoint()
+#  endif
+#endif /* !SDL_AssertBreakpoint */
+
+/**
+ * The macro used when an assertion is enabled.
+ *
+ * This isn't for direct use by apps, but this is the code that is inserted
+ * when an SDL_assert is enabled.
+ *
+ * The `do {} while(0)` avoids dangling else problems:
+ *
+ * ```c
+ * if (x) SDL_assert(y); else blah();
+ * ```
+ *
+ * ... without the do/while, the "else" could attach to this macro's "if". We
+ * try to handle just the minimum we need here in a macro...the loop, the
+ * static vars, and break points. The heavy lifting is handled in
+ * SDL_ReportAssertion().
+ *
+ * \param condition the condition to assert.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_enabled_assert(condition) \
+    do { \
+        while ( !(condition) ) { \
+            static struct SDL_AssertData sdl_assert_data = { false, 0, #condition, NULL, 0, NULL, NULL }; \
+            const SDL_AssertState sdl_assert_state = SDL_ReportAssertion(&sdl_assert_data, SDL_FUNCTION, SDL_FILE, SDL_LINE); \
+            if (sdl_assert_state == SDL_ASSERTION_RETRY) { \
+                continue; /* go again. */ \
+            } else if (sdl_assert_state == SDL_ASSERTION_BREAK) { \
+                SDL_AssertBreakpoint(); \
+            } \
+            break; /* not retrying. */ \
+        } \
+    } while (SDL_NULL_WHILE_LOOP_CONDITION)
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * An assertion test that is normally performed only in debug builds.
+ *
+ * This macro is enabled when the SDL_ASSERT_LEVEL is >= 2, otherwise it is
+ * disabled. This is meant to only do these tests in debug builds, so they can
+ * tend to be more expensive, and they are meant to bring everything to a halt
+ * when they fail, with the programmer there to assess the problem.
+ *
+ * In short: you can sprinkle these around liberally and assume they will
+ * evaporate out of the build when building for end-users.
+ *
+ * When assertions are disabled, this wraps `condition` in a `sizeof`
+ * operator, which means any function calls and side effects will not run, but
+ * the compiler will not complain about any otherwise-unused variables that
+ * are only referenced in the assertion.
+ *
+ * One can set the environment variable "SDL_ASSERT" to one of several strings
+ * ("abort", "break", "retry", "ignore", "always_ignore") to force a default
+ * behavior, which may be desirable for automation purposes. If your platform
+ * requires GUI interfaces to happen on the main thread but you're debugging
+ * an assertion in a background thread, it might be desirable to set this to
+ * "break" so that your debugger takes control as soon as assert is triggered,
+ * instead of risking a bad UI interaction (deadlock, etc) in the application.
+ *
+ * \param condition boolean value to test.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_assert(condition) if (assertion_enabled && (condition)) { trigger_assertion; }
+
+/**
+ * An assertion test that is performed even in release builds.
+ *
+ * This macro is enabled when the SDL_ASSERT_LEVEL is >= 1, otherwise it is
+ * disabled. This is meant to be for tests that are cheap to make and
+ * extremely unlikely to fail; generally it is frowned upon to have an
+ * assertion failure in a release build, so these assertions generally need to
+ * be of more than life-and-death importance if there's a chance they might
+ * trigger. You should almost always consider handling these cases more
+ * gracefully than an assert allows.
+ *
+ * When assertions are disabled, this wraps `condition` in a `sizeof`
+ * operator, which means any function calls and side effects will not run, but
+ * the compiler will not complain about any otherwise-unused variables that
+ * are only referenced in the assertion.
+ *
+ * One can set the environment variable "SDL_ASSERT" to one of several strings
+ * ("abort", "break", "retry", "ignore", "always_ignore") to force a default
+ * behavior, which may be desirable for automation purposes. If your platform
+ * requires GUI interfaces to happen on the main thread but you're debugging
+ * an assertion in a background thread, it might be desirable to set this to
+ * "break" so that your debugger takes control as soon as assert is triggered,
+ * instead of risking a bad UI interaction (deadlock, etc) in the application.
+ * *
+ *
+ * \param condition boolean value to test.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_assert_release(condition) SDL_disabled_assert(condition)
+
+/**
+ * An assertion test that is performed only when built with paranoid settings.
+ *
+ * This macro is enabled when the SDL_ASSERT_LEVEL is >= 3, otherwise it is
+ * disabled. This is a higher level than both release and debug, so these
+ * tests are meant to be expensive and only run when specifically looking for
+ * extremely unexpected failure cases in a special build.
+ *
+ * When assertions are disabled, this wraps `condition` in a `sizeof`
+ * operator, which means any function calls and side effects will not run, but
+ * the compiler will not complain about any otherwise-unused variables that
+ * are only referenced in the assertion.
+ *
+ * One can set the environment variable "SDL_ASSERT" to one of several strings
+ * ("abort", "break", "retry", "ignore", "always_ignore") to force a default
+ * behavior, which may be desirable for automation purposes. If your platform
+ * requires GUI interfaces to happen on the main thread but you're debugging
+ * an assertion in a background thread, it might be desirable to set this to
+ * "break" so that your debugger takes control as soon as assert is triggered,
+ * instead of risking a bad UI interaction (deadlock, etc) in the application.
+ *
+ * \param condition boolean value to test.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_assert_paranoid(condition) SDL_disabled_assert(condition)
+
+/* Enable various levels of assertions. */
+#elif SDL_ASSERT_LEVEL == 0   /* assertions disabled */
+#   define SDL_assert(condition) SDL_disabled_assert(condition)
+#   define SDL_assert_release(condition) SDL_disabled_assert(condition)
+#   define SDL_assert_paranoid(condition) SDL_disabled_assert(condition)
+#elif SDL_ASSERT_LEVEL == 1  /* release settings. */
+#   define SDL_assert(condition) SDL_disabled_assert(condition)
+#   define SDL_assert_release(condition) SDL_enabled_assert(condition)
+#   define SDL_assert_paranoid(condition) SDL_disabled_assert(condition)
+#elif SDL_ASSERT_LEVEL == 2  /* debug settings. */
+#   define SDL_assert(condition) SDL_enabled_assert(condition)
+#   define SDL_assert_release(condition) SDL_enabled_assert(condition)
+#   define SDL_assert_paranoid(condition) SDL_disabled_assert(condition)
+#elif SDL_ASSERT_LEVEL == 3  /* paranoid settings. */
+#   define SDL_assert(condition) SDL_enabled_assert(condition)
+#   define SDL_assert_release(condition) SDL_enabled_assert(condition)
+#   define SDL_assert_paranoid(condition) SDL_enabled_assert(condition)
+#else
+#   error Unknown assertion level.
+#endif
+
+/**
+ * An assertion test that is always performed.
+ *
+ * This macro is always enabled no matter what SDL_ASSERT_LEVEL is set to. You
+ * almost never want to use this, as it could trigger on an end-user's system,
+ * crashing your program.
+ *
+ * One can set the environment variable "SDL_ASSERT" to one of several strings
+ * ("abort", "break", "retry", "ignore", "always_ignore") to force a default
+ * behavior, which may be desirable for automation purposes. If your platform
+ * requires GUI interfaces to happen on the main thread but you're debugging
+ * an assertion in a background thread, it might be desirable to set this to
+ * "break" so that your debugger takes control as soon as assert is triggered,
+ * instead of risking a bad UI interaction (deadlock, etc) in the application.
+ *
+ * \param condition boolean value to test.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_assert_always(condition) SDL_enabled_assert(condition)
+
+
+/**
+ * A callback that fires when an SDL assertion fails.
+ *
+ * \param data a pointer to the SDL_AssertData structure corresponding to the
+ *             current assertion.
+ * \param userdata what was passed as `userdata` to SDL_SetAssertionHandler().
+ * \returns an SDL_AssertState value indicating how to handle the failure.
+ *
+ * \threadsafety This callback may be called from any thread that triggers an
+ *               assert at any time.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef SDL_AssertState (SDLCALL *SDL_AssertionHandler)(
+                                 const SDL_AssertData *data, void *userdata);
+
+/**
+ * Set an application-defined assertion handler.
+ *
+ * This function allows an application to show its own assertion UI and/or
+ * force the response to an assertion failure. If the application doesn't
+ * provide this, SDL will try to do the right thing, popping up a
+ * system-specific GUI dialog, and probably minimizing any fullscreen windows.
+ *
+ * This callback may fire from any thread, but it runs wrapped in a mutex, so
+ * it will only fire from one thread at a time.
+ *
+ * This callback is NOT reset to SDL's internal handler upon SDL_Quit()!
+ *
+ * \param handler the SDL_AssertionHandler function to call when an assertion
+ *                fails or NULL for the default handler.
+ * \param userdata a pointer that is passed to `handler`.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAssertionHandler
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_SetAssertionHandler(
+                                            SDL_AssertionHandler handler,
+                                            void *userdata);
+
+/**
+ * Get the default assertion handler.
+ *
+ * This returns the function pointer that is called by default when an
+ * assertion is triggered. This is an internal function provided by SDL, that
+ * is used for assertions when SDL_SetAssertionHandler() hasn't been used to
+ * provide a different function.
+ *
+ * \returns the default SDL_AssertionHandler that is called when an assert
+ *          triggers.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAssertionHandler
+ */
+extern SDL_DECLSPEC SDL_AssertionHandler SDLCALL SDL_GetDefaultAssertionHandler(void);
+
+/**
+ * Get the current assertion handler.
+ *
+ * This returns the function pointer that is called when an assertion is
+ * triggered. This is either the value last passed to
+ * SDL_SetAssertionHandler(), or if no application-specified function is set,
+ * is equivalent to calling SDL_GetDefaultAssertionHandler().
+ *
+ * The parameter `puserdata` is a pointer to a void*, which will store the
+ * "userdata" pointer that was passed to SDL_SetAssertionHandler(). This value
+ * will always be NULL for the default handler. If you don't care about this
+ * data, it is safe to pass a NULL pointer to this function to ignore it.
+ *
+ * \param puserdata pointer which is filled with the "userdata" pointer that
+ *                  was passed to SDL_SetAssertionHandler().
+ * \returns the SDL_AssertionHandler that is called when an assert triggers.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetAssertionHandler
+ */
+extern SDL_DECLSPEC SDL_AssertionHandler SDLCALL SDL_GetAssertionHandler(void **puserdata);
+
+/**
+ * Get a list of all assertion failures.
+ *
+ * This function gets all assertions triggered since the last call to
+ * SDL_ResetAssertionReport(), or the start of the program.
+ *
+ * The proper way to examine this data looks something like this:
+ *
+ * ```c
+ * const SDL_AssertData *item = SDL_GetAssertionReport();
+ * while (item) {
+ *    printf("'%s', %s (%s:%d), triggered %u times, always ignore: %s.\\n",
+ *           item->condition, item->function, item->filename,
+ *           item->linenum, item->trigger_count,
+ *           item->always_ignore ? "yes" : "no");
+ *    item = item->next;
+ * }
+ * ```
+ *
+ * \returns a list of all failed assertions or NULL if the list is empty. This
+ *          memory should not be modified or freed by the application. This
+ *          pointer remains valid until the next call to SDL_Quit() or
+ *          SDL_ResetAssertionReport().
+ *
+ * \threadsafety This function is not thread safe. Other threads calling
+ *               SDL_ResetAssertionReport() simultaneously, may render the
+ *               returned pointer invalid.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ResetAssertionReport
+ */
+extern SDL_DECLSPEC const SDL_AssertData * SDLCALL SDL_GetAssertionReport(void);
+
+/**
+ * Clear the list of all assertion failures.
+ *
+ * This function will clear the list of all assertions triggered up to that
+ * point. Immediately following this call, SDL_GetAssertionReport will return
+ * no items. In addition, any previously-triggered assertions will be reset to
+ * a trigger_count of zero, and their always_ignore state will be false.
+ *
+ * \threadsafety This function is not thread safe. Other threads triggering an
+ *               assertion, or simultaneously calling this function may cause
+ *               memory leaks or crashes.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAssertionReport
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ResetAssertionReport(void);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_assert_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_asyncio.h

@@ -0,0 +1,546 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: AsyncIO */
+
+/**
+ * # CategoryAsyncIO
+ *
+ * SDL offers a way to perform I/O asynchronously. This allows an app to read
+ * or write files without waiting for data to actually transfer; the functions
+ * that request I/O never block while the request is fulfilled.
+ *
+ * Instead, the data moves in the background and the app can check for results
+ * at their leisure.
+ *
+ * This is more complicated than just reading and writing files in a
+ * synchronous way, but it can allow for more efficiency, and never having
+ * framerate drops as the hard drive catches up, etc.
+ *
+ * The general usage pattern for async I/O is:
+ *
+ * - Create one or more SDL_AsyncIOQueue objects.
+ * - Open files with SDL_AsyncIOFromFile.
+ * - Start I/O tasks to the files with SDL_ReadAsyncIO or SDL_WriteAsyncIO,
+ *   putting those tasks into one of the queues.
+ * - Later on, use SDL_GetAsyncIOResult on a queue to see if any task is
+ *   finished without blocking. Tasks might finish in any order with success
+ *   or failure.
+ * - When all your tasks are done, close the file with SDL_CloseAsyncIO. This
+ *   also generates a task, since it might flush data to disk!
+ *
+ * This all works, without blocking, in a single thread, but one can also wait
+ * on a queue in a background thread, sleeping until new results have arrived:
+ *
+ * - Call SDL_WaitAsyncIOResult from one or more threads to efficiently block
+ *   until new tasks complete.
+ * - When shutting down, call SDL_SignalAsyncIOQueue to unblock any sleeping
+ *   threads despite there being no new tasks completed.
+ *
+ * And, of course, to match the synchronous SDL_LoadFile, we offer
+ * SDL_LoadFileAsync as a convenience function. This will handle allocating a
+ * buffer, slurping in the file data, and null-terminating it; you still check
+ * for results later.
+ *
+ * Behind the scenes, SDL will use newer, efficient APIs on platforms that
+ * support them: Linux's io_uring and Windows 11's IoRing, for example. If
+ * those technologies aren't available, SDL will offload the work to a thread
+ * pool that will manage otherwise-synchronous loads without blocking the app.
+ *
+ * ## Best Practices
+ *
+ * Simple non-blocking I/O--for an app that just wants to pick up data
+ * whenever it's ready without losing framerate waiting on disks to spin--can
+ * use whatever pattern works well for the program. In this case, simply call
+ * SDL_ReadAsyncIO, or maybe SDL_LoadFileAsync, as needed. Once a frame, call
+ * SDL_GetAsyncIOResult to check for any completed tasks and deal with the
+ * data as it arrives.
+ *
+ * If two separate pieces of the same program need their own I/O, it is legal
+ * for each to create their own queue. This will prevent either piece from
+ * accidentally consuming the other's completed tasks. Each queue does require
+ * some amount of resources, but it is not an overwhelming cost. Do not make a
+ * queue for each task, however. It is better to put many tasks into a single
+ * queue. They will be reported in order of completion, not in the order they
+ * were submitted, so it doesn't generally matter what order tasks are
+ * started.
+ *
+ * One async I/O queue can be shared by multiple threads, or one thread can
+ * have more than one queue, but the most efficient way--if ruthless
+ * efficiency is the goal--is to have one queue per thread, with multiple
+ * threads working in parallel, and attempt to keep each queue loaded with
+ * tasks that are both started by and consumed by the same thread. On modern
+ * platforms that can use newer interfaces, this can keep data flowing as
+ * efficiently as possible all the way from storage hardware to the app, with
+ * no contention between threads for access to the same queue.
+ *
+ * Written data is not guaranteed to make it to physical media by the time a
+ * closing task is completed, unless SDL_CloseAsyncIO is called with its
+ * `flush` parameter set to true, which is to say that a successful result
+ * here can still result in lost data during an unfortunately-timed power
+ * outage if not flushed. However, flushing will take longer and may be
+ * unnecessary, depending on the app's needs.
+ */
+
+#ifndef SDL_asyncio_h_
+#define SDL_asyncio_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * The asynchronous I/O operation structure.
+ *
+ * This operates as an opaque handle. One can then request read or write
+ * operations on it.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ *
+ * \sa SDL_AsyncIOFromFile
+ */
+typedef struct SDL_AsyncIO SDL_AsyncIO;
+
+/**
+ * Types of asynchronous I/O tasks.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_AsyncIOTaskType
+{
+    SDL_ASYNCIO_TASK_READ,   /**< A read operation. */
+    SDL_ASYNCIO_TASK_WRITE,  /**< A write operation. */
+    SDL_ASYNCIO_TASK_CLOSE   /**< A close operation. */
+} SDL_AsyncIOTaskType;
+
+/**
+ * Possible outcomes of an asynchronous I/O task.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_AsyncIOResult
+{
+    SDL_ASYNCIO_COMPLETE,  /**< request was completed without error */
+    SDL_ASYNCIO_FAILURE,   /**< request failed for some reason; check SDL_GetError()! */
+    SDL_ASYNCIO_CANCELED   /**< request was canceled before completing. */
+} SDL_AsyncIOResult;
+
+/**
+ * Information about a completed asynchronous I/O request.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_AsyncIOOutcome
+{
+    SDL_AsyncIO *asyncio;   /**< what generated this task. This pointer will be invalid if it was closed! */
+    SDL_AsyncIOTaskType type;  /**< What sort of task was this? Read, write, etc? */
+    SDL_AsyncIOResult result;  /**< the result of the work (success, failure, cancellation). */
+    void *buffer;  /**< buffer where data was read/written. */
+    Uint64 offset;  /**< offset in the SDL_AsyncIO where data was read/written. */
+    Uint64 bytes_requested;  /**< number of bytes the task was to read/write. */
+    Uint64 bytes_transferred;  /**< actual number of bytes that were read/written. */
+    void *userdata;    /**< pointer provided by the app when starting the task */
+} SDL_AsyncIOOutcome;
+
+/**
+ * A queue of completed asynchronous I/O tasks.
+ *
+ * When starting an asynchronous operation, you specify a queue for the new
+ * task. A queue can be asked later if any tasks in it have completed,
+ * allowing an app to manage multiple pending tasks in one place, in whatever
+ * order they complete.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ *
+ * \sa SDL_CreateAsyncIOQueue
+ * \sa SDL_ReadAsyncIO
+ * \sa SDL_WriteAsyncIO
+ * \sa SDL_GetAsyncIOResult
+ * \sa SDL_WaitAsyncIOResult
+ */
+typedef struct SDL_AsyncIOQueue SDL_AsyncIOQueue;
+
+/**
+ * Use this function to create a new SDL_AsyncIO object for reading from
+ * and/or writing to a named file.
+ *
+ * The `mode` string understands the following values:
+ *
+ * - "r": Open a file for reading only. It must exist.
+ * - "w": Open a file for writing only. It will create missing files or
+ *   truncate existing ones.
+ * - "r+": Open a file for update both reading and writing. The file must
+ *   exist.
+ * - "w+": Create an empty file for both reading and writing. If a file with
+ *   the same name already exists its content is erased and the file is
+ *   treated as a new empty file.
+ *
+ * There is no "b" mode, as there is only "binary" style I/O, and no "a" mode
+ * for appending, since you specify the position when starting a task.
+ *
+ * This function supports Unicode filenames, but they must be encoded in UTF-8
+ * format, regardless of the underlying operating system.
+ *
+ * This call is _not_ asynchronous; it will open the file before returning,
+ * under the assumption that doing so is generally a fast operation. Future
+ * reads and writes to the opened file will be async, however.
+ *
+ * \param file a UTF-8 string representing the filename to open.
+ * \param mode an ASCII string representing the mode to be used for opening
+ *             the file.
+ * \returns a pointer to the SDL_AsyncIO structure that is created or NULL on
+ *          failure; call SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_CloseAsyncIO
+ * \sa SDL_ReadAsyncIO
+ * \sa SDL_WriteAsyncIO
+ */
+extern SDL_DECLSPEC SDL_AsyncIO * SDLCALL SDL_AsyncIOFromFile(const char *file, const char *mode);
+
+/**
+ * Use this function to get the size of the data stream in an SDL_AsyncIO.
+ *
+ * This call is _not_ asynchronous; it assumes that obtaining this info is a
+ * non-blocking operation in most reasonable cases.
+ *
+ * \param asyncio the SDL_AsyncIO to get the size of the data stream from.
+ * \returns the size of the data stream in the SDL_IOStream on success or a
+ *          negative error code on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC Sint64 SDLCALL SDL_GetAsyncIOSize(SDL_AsyncIO *asyncio);
+
+/**
+ * Start an async read.
+ *
+ * This function reads up to `size` bytes from `offset` position in the data
+ * source to the area pointed at by `ptr`. This function may read less bytes
+ * than requested.
+ *
+ * This function returns as quickly as possible; it does not wait for the read
+ * to complete. On a successful return, this work will continue in the
+ * background. If the work begins, even failure is asynchronous: a failing
+ * return value from this function only means the work couldn't start at all.
+ *
+ * `ptr` must remain available until the work is done, and may be accessed by
+ * the system at any time until then. Do not allocate it on the stack, as this
+ * might take longer than the life of the calling function to complete!
+ *
+ * An SDL_AsyncIOQueue must be specified. The newly-created task will be added
+ * to it when it completes its work.
+ *
+ * \param asyncio a pointer to an SDL_AsyncIO structure.
+ * \param ptr a pointer to a buffer to read data into.
+ * \param offset the position to start reading in the data source.
+ * \param size the number of bytes to read from the data source.
+ * \param queue a queue to add the new SDL_AsyncIO to.
+ * \param userdata an app-defined pointer that will be provided with the task
+ *                 results.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_WriteAsyncIO
+ * \sa SDL_CreateAsyncIOQueue
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_ReadAsyncIO(SDL_AsyncIO *asyncio, void *ptr, Uint64 offset, Uint64 size, SDL_AsyncIOQueue *queue, void *userdata);
+
+/**
+ * Start an async write.
+ *
+ * This function writes `size` bytes from `offset` position in the data source
+ * to the area pointed at by `ptr`.
+ *
+ * This function returns as quickly as possible; it does not wait for the
+ * write to complete. On a successful return, this work will continue in the
+ * background. If the work begins, even failure is asynchronous: a failing
+ * return value from this function only means the work couldn't start at all.
+ *
+ * `ptr` must remain available until the work is done, and may be accessed by
+ * the system at any time until then. Do not allocate it on the stack, as this
+ * might take longer than the life of the calling function to complete!
+ *
+ * An SDL_AsyncIOQueue must be specified. The newly-created task will be added
+ * to it when it completes its work.
+ *
+ * \param asyncio a pointer to an SDL_AsyncIO structure.
+ * \param ptr a pointer to a buffer to write data from.
+ * \param offset the position to start writing to the data source.
+ * \param size the number of bytes to write to the data source.
+ * \param queue a queue to add the new SDL_AsyncIO to.
+ * \param userdata an app-defined pointer that will be provided with the task
+ *                 results.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ReadAsyncIO
+ * \sa SDL_CreateAsyncIOQueue
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_WriteAsyncIO(SDL_AsyncIO *asyncio, void *ptr, Uint64 offset, Uint64 size, SDL_AsyncIOQueue *queue, void *userdata);
+
+/**
+ * Close and free any allocated resources for an async I/O object.
+ *
+ * Closing a file is _also_ an asynchronous task! If a write failure were to
+ * happen during the closing process, for example, the task results will
+ * report it as usual.
+ *
+ * Closing a file that has been written to does not guarantee the data has
+ * made it to physical media; it may remain in the operating system's file
+ * cache, for later writing to disk. This means that a successfully-closed
+ * file can be lost if the system crashes or loses power in this small window.
+ * To prevent this, call this function with the `flush` parameter set to true.
+ * This will make the operation take longer, and perhaps increase system load
+ * in general, but a successful result guarantees that the data has made it to
+ * physical storage. Don't use this for temporary files, caches, and
+ * unimportant data, and definitely use it for crucial irreplaceable files,
+ * like game saves.
+ *
+ * This function guarantees that the close will happen after any other pending
+ * tasks to `asyncio`, so it's safe to open a file, start several operations,
+ * close the file immediately, then check for all results later. This function
+ * will not block until the tasks have completed.
+ *
+ * Once this function returns true, `asyncio` is no longer valid, regardless
+ * of any future outcomes. Any completed tasks might still contain this
+ * pointer in their SDL_AsyncIOOutcome data, in case the app was using this
+ * value to track information, but it should not be used again.
+ *
+ * If this function returns false, the close wasn't started at all, and it's
+ * safe to attempt to close again later.
+ *
+ * An SDL_AsyncIOQueue must be specified. The newly-created task will be added
+ * to it when it completes its work.
+ *
+ * \param asyncio a pointer to an SDL_AsyncIO structure to close.
+ * \param flush true if data should sync to disk before the task completes.
+ * \param queue a queue to add the new SDL_AsyncIO to.
+ * \param userdata an app-defined pointer that will be provided with the task
+ *                 results.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread, but two
+ *               threads should not attempt to close the same object.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_CloseAsyncIO(SDL_AsyncIO *asyncio, bool flush, SDL_AsyncIOQueue *queue, void *userdata);
+
+/**
+ * Create a task queue for tracking multiple I/O operations.
+ *
+ * Async I/O operations are assigned to a queue when started. The queue can be
+ * checked for completed tasks thereafter.
+ *
+ * \returns a new task queue object or NULL if there was an error; call
+ *          SDL_GetError() for more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_DestroyAsyncIOQueue
+ * \sa SDL_GetAsyncIOResult
+ * \sa SDL_WaitAsyncIOResult
+ */
+extern SDL_DECLSPEC SDL_AsyncIOQueue * SDLCALL SDL_CreateAsyncIOQueue(void);
+
+/**
+ * Destroy a previously-created async I/O task queue.
+ *
+ * If there are still tasks pending for this queue, this call will block until
+ * those tasks are finished. All those tasks will be deallocated. Their
+ * results will be lost to the app.
+ *
+ * Any pending reads from SDL_LoadFileAsync() that are still in this queue
+ * will have their buffers deallocated by this function, to prevent a memory
+ * leak.
+ *
+ * Once this function is called, the queue is no longer valid and should not
+ * be used, including by other threads that might access it while destruction
+ * is blocking on pending tasks.
+ *
+ * Do not destroy a queue that still has threads waiting on it through
+ * SDL_WaitAsyncIOResult(). You can call SDL_SignalAsyncIOQueue() first to
+ * unblock those threads, and take measures (such as SDL_WaitThread()) to make
+ * sure they have finished their wait and won't wait on the queue again.
+ *
+ * \param queue the task queue to destroy.
+ *
+ * \threadsafety It is safe to call this function from any thread, so long as
+ *               no other thread is waiting on the queue with
+ *               SDL_WaitAsyncIOResult.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_DestroyAsyncIOQueue(SDL_AsyncIOQueue *queue);
+
+/**
+ * Query an async I/O task queue for completed tasks.
+ *
+ * If a task assigned to this queue has finished, this will return true and
+ * fill in `outcome` with the details of the task. If no task in the queue has
+ * finished, this function will return false. This function does not block.
+ *
+ * If a task has completed, this function will free its resources and the task
+ * pointer will no longer be valid. The task will be removed from the queue.
+ *
+ * It is safe for multiple threads to call this function on the same queue at
+ * once; a completed task will only go to one of the threads.
+ *
+ * \param queue the async I/O task queue to query.
+ * \param outcome details of a finished task will be written here. May not be
+ *                NULL.
+ * \returns true if a task has completed, false otherwise.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_WaitAsyncIOResult
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_GetAsyncIOResult(SDL_AsyncIOQueue *queue, SDL_AsyncIOOutcome *outcome);
+
+/**
+ * Block until an async I/O task queue has a completed task.
+ *
+ * This function puts the calling thread to sleep until there a task assigned
+ * to the queue that has finished.
+ *
+ * If a task assigned to the queue has finished, this will return true and
+ * fill in `outcome` with the details of the task. If no task in the queue has
+ * finished, this function will return false.
+ *
+ * If a task has completed, this function will free its resources and the task
+ * pointer will no longer be valid. The task will be removed from the queue.
+ *
+ * It is safe for multiple threads to call this function on the same queue at
+ * once; a completed task will only go to one of the threads.
+ *
+ * Note that by the nature of various platforms, more than one waiting thread
+ * may wake to handle a single task, but only one will obtain it, so
+ * `timeoutMS` is a _maximum_ wait time, and this function may return false
+ * sooner.
+ *
+ * This function may return false if there was a system error, the OS
+ * inadvertently awoke multiple threads, or if SDL_SignalAsyncIOQueue() was
+ * called to wake up all waiting threads without a finished task.
+ *
+ * A timeout can be used to specify a maximum wait time, but rather than
+ * polling, it is possible to have a timeout of -1 to wait forever, and use
+ * SDL_SignalAsyncIOQueue() to wake up the waiting threads later.
+ *
+ * \param queue the async I/O task queue to wait on.
+ * \param outcome details of a finished task will be written here. May not be
+ *                NULL.
+ * \param timeoutMS the maximum time to wait, in milliseconds, or -1 to wait
+ *                  indefinitely.
+ * \returns true if task has completed, false otherwise.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SignalAsyncIOQueue
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_WaitAsyncIOResult(SDL_AsyncIOQueue *queue, SDL_AsyncIOOutcome *outcome, Sint32 timeoutMS);
+
+/**
+ * Wake up any threads that are blocking in SDL_WaitAsyncIOResult().
+ *
+ * This will unblock any threads that are sleeping in a call to
+ * SDL_WaitAsyncIOResult for the specified queue, and cause them to return
+ * from that function.
+ *
+ * This can be useful when destroying a queue to make sure nothing is touching
+ * it indefinitely. In this case, once this call completes, the caller should
+ * take measures to make sure any previously-blocked threads have returned
+ * from their wait and will not touch the queue again (perhaps by setting a
+ * flag to tell the threads to terminate and then using SDL_WaitThread() to
+ * make sure they've done so).
+ *
+ * \param queue the async I/O task queue to signal.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_WaitAsyncIOResult
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_SignalAsyncIOQueue(SDL_AsyncIOQueue *queue);
+
+/**
+ * Load all the data from a file path, asynchronously.
+ *
+ * This function returns as quickly as possible; it does not wait for the read
+ * to complete. On a successful return, this work will continue in the
+ * background. If the work begins, even failure is asynchronous: a failing
+ * return value from this function only means the work couldn't start at all.
+ *
+ * The data is allocated with a zero byte at the end (null terminated) for
+ * convenience. This extra byte is not included in SDL_AsyncIOOutcome's
+ * bytes_transferred value.
+ *
+ * This function will allocate the buffer to contain the file. It must be
+ * deallocated by calling SDL_free() on SDL_AsyncIOOutcome's buffer field
+ * after completion.
+ *
+ * An SDL_AsyncIOQueue must be specified. The newly-created task will be added
+ * to it when it completes its work.
+ *
+ * \param file the path to read all available data from.
+ * \param queue a queue to add the new SDL_AsyncIO to.
+ * \param userdata an app-defined pointer that will be provided with the task
+ *                 results.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_LoadFile_IO
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_LoadFileAsync(const char *file, SDL_AsyncIOQueue *queue, void *userdata);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_asyncio_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_atomic.h

@@ -0,0 +1,682 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryAtomic
+ *
+ * Atomic operations.
+ *
+ * IMPORTANT: If you are not an expert in concurrent lockless programming, you
+ * should not be using any functions in this file. You should be protecting
+ * your data structures with full mutexes instead.
+ *
+ * ***Seriously, here be dragons!***
+ *
+ * You can find out a little more about lockless programming and the subtle
+ * issues that can arise here:
+ * https://learn.microsoft.com/en-us/windows/win32/dxtecharts/lockless-programming
+ *
+ * There's also lots of good information here:
+ *
+ * - https://www.1024cores.net/home/lock-free-algorithms
+ * - https://preshing.com/
+ *
+ * These operations may or may not actually be implemented using processor
+ * specific atomic operations. When possible they are implemented as true
+ * processor specific atomic operations. When that is not possible the are
+ * implemented using locks that *do* use the available atomic operations.
+ *
+ * All of the atomic operations that modify memory are full memory barriers.
+ */
+
+#ifndef SDL_atomic_h_
+#define SDL_atomic_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_platform_defines.h>
+
+#include <SDL3/SDL_begin_code.h>
+
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * An atomic spinlock.
+ *
+ * The atomic locks are efficient spinlocks using CPU instructions, but are
+ * vulnerable to starvation and can spin forever if a thread holding a lock
+ * has been terminated. For this reason you should minimize the code executed
+ * inside an atomic lock and never do expensive things like API or system
+ * calls while holding them.
+ *
+ * They are also vulnerable to starvation if the thread holding the lock is
+ * lower priority than other threads and doesn't get scheduled. In general you
+ * should use mutexes instead, since they have better performance and
+ * contention behavior.
+ *
+ * The atomic locks are not safe to lock recursively.
+ *
+ * Porting Note: The spin lock functions and type are required and can not be
+ * emulated because they are used in the atomic emulation code.
+ */
+typedef int SDL_SpinLock;
+
+/**
+ * Try to lock a spin lock by setting it to a non-zero value.
+ *
+ * ***Please note that spinlocks are dangerous if you don't know what you're
+ * doing. Please be careful using any sort of spinlock!***
+ *
+ * \param lock a pointer to a lock variable.
+ * \returns true if the lock succeeded, false if the lock is already held.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_LockSpinlock
+ * \sa SDL_UnlockSpinlock
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_TryLockSpinlock(SDL_SpinLock *lock);
+
+/**
+ * Lock a spin lock by setting it to a non-zero value.
+ *
+ * ***Please note that spinlocks are dangerous if you don't know what you're
+ * doing. Please be careful using any sort of spinlock!***
+ *
+ * \param lock a pointer to a lock variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_TryLockSpinlock
+ * \sa SDL_UnlockSpinlock
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LockSpinlock(SDL_SpinLock *lock);
+
+/**
+ * Unlock a spin lock by setting it to 0.
+ *
+ * Always returns immediately.
+ *
+ * ***Please note that spinlocks are dangerous if you don't know what you're
+ * doing. Please be careful using any sort of spinlock!***
+ *
+ * \param lock a pointer to a lock variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_LockSpinlock
+ * \sa SDL_TryLockSpinlock
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_UnlockSpinlock(SDL_SpinLock *lock);
+
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * Mark a compiler barrier.
+ *
+ * A compiler barrier prevents the compiler from reordering reads and writes
+ * to globally visible variables across the call.
+ *
+ * This macro only prevents the compiler from reordering reads and writes, it
+ * does not prevent the CPU from reordering reads and writes. However, all of
+ * the atomic operations that modify memory are full memory barriers.
+ *
+ * \threadsafety Obviously this macro is safe to use from any thread at any
+ *               time, but if you find yourself needing this, you are probably
+ *               dealing with some very sensitive code; be careful!
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_CompilerBarrier() DoCompilerSpecificReadWriteBarrier()
+
+#elif defined(_MSC_VER) && (_MSC_VER > 1200) && !defined(__clang__)
+void _ReadWriteBarrier(void);
+#pragma intrinsic(_ReadWriteBarrier)
+#define SDL_CompilerBarrier()   _ReadWriteBarrier()
+#elif (defined(__GNUC__) && !defined(SDL_PLATFORM_EMSCRIPTEN)) || (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x5120))
+/* This is correct for all CPUs when using GCC or Solaris Studio 12.1+. */
+#define SDL_CompilerBarrier()   __asm__ __volatile__ ("" : : : "memory")
+#elif defined(__WATCOMC__)
+extern __inline void SDL_CompilerBarrier(void);
+#pragma aux SDL_CompilerBarrier = "" parm [] modify exact [];
+#else
+#define SDL_CompilerBarrier()   \
+{ SDL_SpinLock _tmp = 0; SDL_LockSpinlock(&_tmp); SDL_UnlockSpinlock(&_tmp); }
+#endif
+
+/**
+ * Insert a memory release barrier (function version).
+ *
+ * Please refer to SDL_MemoryBarrierRelease for details. This is a function
+ * version, which might be useful if you need to use this functionality from a
+ * scripting language, etc. Also, some of the macro versions call this
+ * function behind the scenes, where more heavy lifting can happen inside of
+ * SDL. Generally, though, an app written in C/C++/etc should use the macro
+ * version, as it will be more efficient.
+ *
+ * \threadsafety Obviously this function is safe to use from any thread at any
+ *               time, but if you find yourself needing this, you are probably
+ *               dealing with some very sensitive code; be careful!
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_MemoryBarrierRelease
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_MemoryBarrierReleaseFunction(void);
+
+/**
+ * Insert a memory acquire barrier (function version).
+ *
+ * Please refer to SDL_MemoryBarrierRelease for details. This is a function
+ * version, which might be useful if you need to use this functionality from a
+ * scripting language, etc. Also, some of the macro versions call this
+ * function behind the scenes, where more heavy lifting can happen inside of
+ * SDL. Generally, though, an app written in C/C++/etc should use the macro
+ * version, as it will be more efficient.
+ *
+ * \threadsafety Obviously this function is safe to use from any thread at any
+ *               time, but if you find yourself needing this, you are probably
+ *               dealing with some very sensitive code; be careful!
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_MemoryBarrierAcquire
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_MemoryBarrierAcquireFunction(void);
+
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * Insert a memory release barrier (macro version).
+ *
+ * Memory barriers are designed to prevent reads and writes from being
+ * reordered by the compiler and being seen out of order on multi-core CPUs.
+ *
+ * A typical pattern would be for thread A to write some data and a flag, and
+ * for thread B to read the flag and get the data. In this case you would
+ * insert a release barrier between writing the data and the flag,
+ * guaranteeing that the data write completes no later than the flag is
+ * written, and you would insert an acquire barrier between reading the flag
+ * and reading the data, to ensure that all the reads associated with the flag
+ * have completed.
+ *
+ * In this pattern you should always see a release barrier paired with an
+ * acquire barrier and you should gate the data reads/writes with a single
+ * flag variable.
+ *
+ * For more information on these semantics, take a look at the blog post:
+ * http://preshing.com/20120913/acquire-and-release-semantics
+ *
+ * This is the macro version of this functionality; if possible, SDL will use
+ * compiler intrinsics or inline assembly, but some platforms might need to
+ * call the function version of this, SDL_MemoryBarrierReleaseFunction to do
+ * the heavy lifting. Apps that can use the macro should favor it over the
+ * function.
+ *
+ * \threadsafety Obviously this macro is safe to use from any thread at any
+ *               time, but if you find yourself needing this, you are probably
+ *               dealing with some very sensitive code; be careful!
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_MemoryBarrierAcquire
+ * \sa SDL_MemoryBarrierReleaseFunction
+ */
+#define SDL_MemoryBarrierRelease() SDL_MemoryBarrierReleaseFunction()
+
+/**
+ * Insert a memory acquire barrier (macro version).
+ *
+ * Please see SDL_MemoryBarrierRelease for the details on what memory barriers
+ * are and when to use them.
+ *
+ * This is the macro version of this functionality; if possible, SDL will use
+ * compiler intrinsics or inline assembly, but some platforms might need to
+ * call the function version of this, SDL_MemoryBarrierAcquireFunction, to do
+ * the heavy lifting. Apps that can use the macro should favor it over the
+ * function.
+ *
+ * \threadsafety Obviously this macro is safe to use from any thread at any
+ *               time, but if you find yourself needing this, you are probably
+ *               dealing with some very sensitive code; be careful!
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_MemoryBarrierRelease
+ * \sa SDL_MemoryBarrierAcquireFunction
+ */
+#define SDL_MemoryBarrierAcquire() SDL_MemoryBarrierAcquireFunction()
+
+#elif defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__))
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("lwsync" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("lwsync" : : : "memory")
+#elif defined(__GNUC__) && defined(__aarch64__)
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#elif defined(__GNUC__) && defined(__arm__)
+#if 0 /* defined(SDL_PLATFORM_LINUX) || defined(SDL_PLATFORM_ANDROID) */
+/* Information from:
+   https://chromium.googlesource.com/chromium/chromium/+/trunk/base/atomicops_internals_arm_gcc.h#19
+
+   The Linux kernel provides a helper function which provides the right code for a memory barrier,
+   hard-coded at address 0xffff0fa0
+*/
+typedef void (*SDL_KernelMemoryBarrierFunc)();
+#define SDL_MemoryBarrierRelease()  ((SDL_KernelMemoryBarrierFunc)0xffff0fa0)()
+#define SDL_MemoryBarrierAcquire()  ((SDL_KernelMemoryBarrierFunc)0xffff0fa0)()
+#else
+#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7S__) || defined(__ARM_ARCH_8A__)
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("dmb ish" : : : "memory")
+#elif defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6T2__) || defined(__ARM_ARCH_6Z__) || defined(__ARM_ARCH_6ZK__)
+#ifdef __thumb__
+/* The mcr instruction isn't available in thumb mode, use real functions */
+#define SDL_MEMORY_BARRIER_USES_FUNCTION
+#define SDL_MemoryBarrierRelease()   SDL_MemoryBarrierReleaseFunction()
+#define SDL_MemoryBarrierAcquire()   SDL_MemoryBarrierAcquireFunction()
+#else
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory")
+#endif /* __thumb__ */
+#else
+#define SDL_MemoryBarrierRelease()   __asm__ __volatile__ ("" : : : "memory")
+#define SDL_MemoryBarrierAcquire()   __asm__ __volatile__ ("" : : : "memory")
+#endif /* SDL_PLATFORM_LINUX || SDL_PLATFORM_ANDROID */
+#endif /* __GNUC__ && __arm__ */
+#else
+#if (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x5120))
+/* This is correct for all CPUs on Solaris when using Solaris Studio 12.1+. */
+#include <mbarrier.h>
+#define SDL_MemoryBarrierRelease()  __machine_rel_barrier()
+#define SDL_MemoryBarrierAcquire()  __machine_acq_barrier()
+#else
+/* This is correct for the x86 and x64 CPUs, and we'll expand this over time. */
+#define SDL_MemoryBarrierRelease()  SDL_CompilerBarrier()
+#define SDL_MemoryBarrierAcquire()  SDL_CompilerBarrier()
+#endif
+#endif
+
+/* "REP NOP" is PAUSE, coded for tools that don't know it by that name. */
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro to insert a CPU-specific "pause" instruction into the program.
+ *
+ * This can be useful in busy-wait loops, as it serves as a hint to the CPU as
+ * to the program's intent; some CPUs can use this to do more efficient
+ * processing. On some platforms, this doesn't do anything, so using this
+ * macro might just be a harmless no-op.
+ *
+ * Note that if you are busy-waiting, there are often more-efficient
+ * approaches with other synchronization primitives: mutexes, semaphores,
+ * condition variables, etc.
+ *
+ * \threadsafety This macro is safe to use from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_CPUPauseInstruction() DoACPUPauseInACompilerAndArchitectureSpecificWay
+
+#elif (defined(__GNUC__) || defined(__clang__)) && (defined(__i386__) || defined(__x86_64__))
+    #define SDL_CPUPauseInstruction() __asm__ __volatile__("pause\n")  /* Some assemblers can't do REP NOP, so go with PAUSE. */
+#elif (defined(__arm__) && defined(__ARM_ARCH) && __ARM_ARCH >= 7) || defined(__aarch64__)
+    #define SDL_CPUPauseInstruction() __asm__ __volatile__("yield" ::: "memory")
+#elif (defined(__powerpc__) || defined(__powerpc64__))
+    #define SDL_CPUPauseInstruction() __asm__ __volatile__("or 27,27,27");
+#elif (defined(__riscv) && __riscv_xlen == 64)
+    #define SDL_CPUPauseInstruction() __asm__ __volatile__(".insn i 0x0F, 0, x0, x0, 0x010");
+#elif defined(_MSC_VER) && (defined(_M_IX86) || defined(_M_X64))
+    #define SDL_CPUPauseInstruction() _mm_pause()  /* this is actually "rep nop" and not a SIMD instruction. No inline asm in MSVC x86-64! */
+#elif defined(_MSC_VER) && (defined(_M_ARM) || defined(_M_ARM64))
+    #define SDL_CPUPauseInstruction() __yield()
+#elif defined(__WATCOMC__) && defined(__386__)
+    extern __inline void SDL_CPUPauseInstruction(void);
+    #pragma aux SDL_CPUPauseInstruction = ".686p" ".xmm2" "pause"
+#else
+    #define SDL_CPUPauseInstruction()
+#endif
+
+
+/**
+ * A type representing an atomic integer value.
+ *
+ * This can be used to manage a value that is synchronized across multiple
+ * CPUs without a race condition; when an app sets a value with
+ * SDL_SetAtomicInt all other threads, regardless of the CPU it is running on,
+ * will see that value when retrieved with SDL_GetAtomicInt, regardless of CPU
+ * caches, etc.
+ *
+ * This is also useful for atomic compare-and-swap operations: a thread can
+ * change the value as long as its current value matches expectations. When
+ * done in a loop, one can guarantee data consistency across threads without a
+ * lock (but the usual warnings apply: if you don't know what you're doing, or
+ * you don't do it carefully, you can confidently cause any number of
+ * disasters with this, so in most cases, you _should_ use a mutex instead of
+ * this!).
+ *
+ * This is a struct so people don't accidentally use numeric operations on it
+ * directly. You have to use SDL atomic functions.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ *
+ * \sa SDL_CompareAndSwapAtomicInt
+ * \sa SDL_GetAtomicInt
+ * \sa SDL_SetAtomicInt
+ * \sa SDL_AddAtomicInt
+ */
+typedef struct SDL_AtomicInt { int value; } SDL_AtomicInt;
+
+/**
+ * Set an atomic variable to a new value if it is currently an old value.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicInt variable to be modified.
+ * \param oldval the old value.
+ * \param newval the new value.
+ * \returns true if the atomic variable was set, false otherwise.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAtomicInt
+ * \sa SDL_SetAtomicInt
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_CompareAndSwapAtomicInt(SDL_AtomicInt *a, int oldval, int newval);
+
+/**
+ * Set an atomic variable to a value.
+ *
+ * This function also acts as a full memory barrier.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicInt variable to be modified.
+ * \param v the desired value.
+ * \returns the previous value of the atomic variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAtomicInt
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_SetAtomicInt(SDL_AtomicInt *a, int v);
+
+/**
+ * Get the value of an atomic variable.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicInt variable.
+ * \returns the current value of an atomic variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetAtomicInt
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_GetAtomicInt(SDL_AtomicInt *a);
+
+/**
+ * Add to an atomic variable.
+ *
+ * This function also acts as a full memory barrier.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicInt variable to be modified.
+ * \param v the desired value to add.
+ * \returns the previous value of the atomic variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_AtomicDecRef
+ * \sa SDL_AtomicIncRef
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_AddAtomicInt(SDL_AtomicInt *a, int v);
+
+#ifndef SDL_AtomicIncRef
+
+/**
+ * Increment an atomic variable used as a reference count.
+ *
+ * ***Note: If you don't know what this macro is for, you shouldn't use it!***
+ *
+ * \param a a pointer to an SDL_AtomicInt to increment.
+ * \returns the previous value of the atomic variable.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_AtomicDecRef
+ */
+#define SDL_AtomicIncRef(a)    SDL_AddAtomicInt(a, 1)
+#endif
+
+#ifndef SDL_AtomicDecRef
+
+/**
+ * Decrement an atomic variable used as a reference count.
+ *
+ * ***Note: If you don't know what this macro is for, you shouldn't use it!***
+ *
+ * \param a a pointer to an SDL_AtomicInt to decrement.
+ * \returns true if the variable reached zero after decrementing, false
+ *          otherwise.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_AtomicIncRef
+ */
+#define SDL_AtomicDecRef(a)    (SDL_AddAtomicInt(a, -1) == 1)
+#endif
+
+/**
+ * A type representing an atomic unsigned 32-bit value.
+ *
+ * This can be used to manage a value that is synchronized across multiple
+ * CPUs without a race condition; when an app sets a value with
+ * SDL_SetAtomicU32 all other threads, regardless of the CPU it is running on,
+ * will see that value when retrieved with SDL_GetAtomicU32, regardless of CPU
+ * caches, etc.
+ *
+ * This is also useful for atomic compare-and-swap operations: a thread can
+ * change the value as long as its current value matches expectations. When
+ * done in a loop, one can guarantee data consistency across threads without a
+ * lock (but the usual warnings apply: if you don't know what you're doing, or
+ * you don't do it carefully, you can confidently cause any number of
+ * disasters with this, so in most cases, you _should_ use a mutex instead of
+ * this!).
+ *
+ * This is a struct so people don't accidentally use numeric operations on it
+ * directly. You have to use SDL atomic functions.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ *
+ * \sa SDL_CompareAndSwapAtomicU32
+ * \sa SDL_GetAtomicU32
+ * \sa SDL_SetAtomicU32
+ */
+typedef struct SDL_AtomicU32 { Uint32 value; } SDL_AtomicU32;
+
+/**
+ * Set an atomic variable to a new value if it is currently an old value.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicU32 variable to be modified.
+ * \param oldval the old value.
+ * \param newval the new value.
+ * \returns true if the atomic variable was set, false otherwise.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAtomicU32
+ * \sa SDL_SetAtomicU32
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_CompareAndSwapAtomicU32(SDL_AtomicU32 *a, Uint32 oldval, Uint32 newval);
+
+/**
+ * Set an atomic variable to a value.
+ *
+ * This function also acts as a full memory barrier.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicU32 variable to be modified.
+ * \param v the desired value.
+ * \returns the previous value of the atomic variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAtomicU32
+ */
+extern SDL_DECLSPEC Uint32 SDLCALL SDL_SetAtomicU32(SDL_AtomicU32 *a, Uint32 v);
+
+/**
+ * Get the value of an atomic variable.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicU32 variable.
+ * \returns the current value of an atomic variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetAtomicU32
+ */
+extern SDL_DECLSPEC Uint32 SDLCALL SDL_GetAtomicU32(SDL_AtomicU32 *a);
+
+/**
+ * Add to an atomic variable.
+ *
+ * This function also acts as a full memory barrier.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to an SDL_AtomicU32 variable to be modified.
+ * \param v the desired value to add or subtract.
+ * \returns the previous value of the atomic variable.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.4.0.
+ */
+extern SDL_DECLSPEC Uint32 SDLCALL SDL_AddAtomicU32(SDL_AtomicU32 *a, int v);
+
+/**
+ * Set a pointer to a new value if it is currently an old value.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to a pointer.
+ * \param oldval the old pointer value.
+ * \param newval the new pointer value.
+ * \returns true if the pointer was set, false otherwise.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_CompareAndSwapAtomicInt
+ * \sa SDL_GetAtomicPointer
+ * \sa SDL_SetAtomicPointer
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_CompareAndSwapAtomicPointer(void **a, void *oldval, void *newval);
+
+/**
+ * Set a pointer to a value atomically.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to a pointer.
+ * \param v the desired pointer value.
+ * \returns the previous value of the pointer.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_CompareAndSwapAtomicPointer
+ * \sa SDL_GetAtomicPointer
+ */
+extern SDL_DECLSPEC void * SDLCALL SDL_SetAtomicPointer(void **a, void *v);
+
+/**
+ * Get the value of a pointer atomically.
+ *
+ * ***Note: If you don't know what this function is for, you shouldn't use
+ * it!***
+ *
+ * \param a a pointer to a pointer.
+ * \returns the current value of a pointer.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_CompareAndSwapAtomicPointer
+ * \sa SDL_SetAtomicPointer
+ */
+extern SDL_DECLSPEC void * SDLCALL SDL_GetAtomicPointer(void **a);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_atomic_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_begin_code.h

@@ -0,0 +1,553 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: BeginCode */
+
+/**
+ * # CategoryBeginCode
+ *
+ * `SDL_begin_code.h` sets things up for C dynamic library function
+ * definitions, static inlined functions, and structures aligned at 4-byte
+ * alignment. If you don't like ugly C preprocessor code, don't look at this
+ * file. :)
+ *
+ * SDL's headers use this; applications generally should not include this
+ * header directly.
+ */
+
+/* This shouldn't be nested -- included it around code only. */
+#ifdef SDL_begin_code_h
+#error Nested inclusion of SDL_begin_code.h
+#endif
+#define SDL_begin_code_h
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro to tag a symbol as deprecated.
+ *
+ * A function is marked deprecated by adding this macro to its declaration:
+ *
+ * ```c
+ * extern SDL_DEPRECATED int ThisFunctionWasABadIdea(void);
+ * ```
+ *
+ * Compilers with deprecation support can give a warning when a deprecated
+ * function is used. This symbol may be used in SDL's headers, but apps are
+ * welcome to use it for their own interfaces as well.
+ *
+ * SDL, on occasion, might deprecate a function for various reasons. However,
+ * SDL never removes symbols before major versions, so deprecated interfaces
+ * in SDL3 will remain available until SDL4, where it would be expected an app
+ * would have to take steps to migrate anyhow.
+ *
+ * On compilers without a deprecation mechanism, this is defined to nothing,
+ * and using a deprecated function will not generate a warning.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_DEPRECATED __attribute__((deprecated))
+
+/**
+ * A macro to tag a symbol as a public API.
+ *
+ * SDL uses this macro for all its public functions. On some targets, it is
+ * used to signal to the compiler that this function needs to be exported from
+ * a shared library, but it might have other side effects.
+ *
+ * This symbol is used in SDL's headers, but apps and other libraries are
+ * welcome to use it for their own interfaces as well.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_DECLSPEC __attribute__ ((visibility("default")))
+
+/**
+ * A macro to set a function's calling conventions.
+ *
+ * SDL uses this macro for all its public functions, and any callbacks it
+ * defines. This macro guarantees that calling conventions match between SDL
+ * and the app, even if the two were built with different compilers or
+ * optimization settings.
+ *
+ * When writing a callback function, it is very important for it to be
+ * correctly tagged with SDLCALL, as mismatched calling conventions can cause
+ * strange behaviors and can be difficult to diagnose. Plus, on many
+ * platforms, SDLCALL is defined to nothing, so compilers won't be able to
+ * warn that the tag is missing.
+ *
+ * This symbol is used in SDL's headers, but apps and other libraries are
+ * welcome to use it for their own interfaces as well.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDLCALL __cdecl
+
+/**
+ * A macro to request a function be inlined.
+ *
+ * This is a hint to the compiler to inline a function. The compiler is free
+ * to ignore this request. On compilers without inline support, this is
+ * defined to nothing.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_INLINE __inline
+
+/**
+ * A macro to demand a function be inlined.
+ *
+ * This is a command to the compiler to inline a function. SDL uses this macro
+ * in its public headers for a handful of simple functions. On compilers
+ * without forceinline support, this is defined to `static SDL_INLINE`, which
+ * is often good enough.
+ *
+ * This symbol is used in SDL's headers, but apps and other libraries are
+ * welcome to use it for their own interfaces as well.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_FORCE_INLINE __forceinline
+
+/**
+ * A macro to tag a function as never-returning.
+ *
+ * This is a hint to the compiler that a function does not return. An example
+ * of a function like this is the C runtime's exit() function.
+ *
+ * This hint can lead to code optimizations, and help analyzers understand
+ * code flow better. On compilers without noreturn support, this is defined to
+ * nothing.
+ *
+ * This symbol is used in SDL's headers, but apps and other libraries are
+ * welcome to use it for their own interfaces as well.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_NORETURN __attribute__((noreturn))
+
+/**
+ * A macro to tag a function as never-returning (for analysis purposes).
+ *
+ * This is almost identical to SDL_NORETURN, except functions marked with this
+ * _can_ actually return. The difference is that this isn't used for code
+ * generation, but rather static analyzers use this information to assume
+ * truths about program state and available code paths. Specifically, this tag
+ * is useful for writing an assertion mechanism. Indeed, SDL_assert uses this
+ * tag behind the scenes. Generally, apps that don't understand the specific
+ * use-case for this tag should avoid using it directly.
+ *
+ * On compilers without analyzer_noreturn support, this is defined to nothing.
+ *
+ * This symbol is used in SDL's headers, but apps and other libraries are
+ * welcome to use it for their own interfaces as well.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_ANALYZER_NORETURN __attribute__((analyzer_noreturn))
+
+
+/**
+ * A macro to signal that a case statement without a `break` is intentional.
+ *
+ * C compilers have gotten more aggressive about warning when a switch's
+ * `case` block does not end with a `break` or other flow control statement,
+ * flowing into the next case's code, as this is a common accident that leads
+ * to strange bugs. But sometimes falling through to the next case is the
+ * correct and desired behavior. This symbol lets an app communicate this
+ * intention to the compiler, so it doesn't generate a warning.
+ *
+ * It is used like this:
+ *
+ * ```c
+ * switch (x) {
+ *     case 1:
+ *         DoSomethingOnlyForOne();
+ *         SDL_FALLTHROUGH;  // tell the compiler this was intentional.
+ *     case 2:
+ *         DoSomethingForOneAndTwo();
+ *         break;
+ * }
+ * ```
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_FALLTHROUGH [[fallthrough]]
+
+/**
+ * A macro to tag a function's return value as critical.
+ *
+ * This is a hint to the compiler that a function's return value should not be
+ * ignored.
+ *
+ * If an NODISCARD function's return value is thrown away (the function is
+ * called as if it returns `void`), the compiler will issue a warning.
+ *
+ * While it's generally good practice to check return values for errors, often
+ * times legitimate programs do not for good reasons. Be careful about what
+ * functions are tagged as NODISCARD. It operates best when used on a function
+ * that's failure is surprising and catastrophic; a good example would be a
+ * program that checks the return values of all its file write function calls
+ * but not the call to close the file, which it assumes incorrectly never
+ * fails.
+ *
+ * Function callers that want to throw away a NODISCARD return value can call
+ * the function with a `(void)` cast, which informs the compiler the act is
+ * intentional.
+ *
+ * On compilers without nodiscard support, this is defined to nothing.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_NODISCARD [[nodiscard]]
+
+/**
+ * A macro to tag a function as an allocator.
+ *
+ * This is a hint to the compiler that a function is an allocator, like
+ * malloc(), with certain rules. A description of how GCC treats this hint is
+ * here:
+ *
+ * https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-malloc-function-attribute
+ *
+ * On compilers without allocator tag support, this is defined to nothing.
+ *
+ * Most apps don't need to, and should not, use this directly.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_MALLOC __declspec(allocator) __desclspec(restrict)
+
+/**
+ * A macro to tag a function as returning a certain allocation.
+ *
+ * This is a hint to the compiler that a function allocates and returns a
+ * specific amount of memory based on one of its arguments. For example, the C
+ * runtime's malloc() function could use this macro with an argument of 1
+ * (first argument to malloc is the size of the allocation).
+ *
+ * On compilers without alloc_size support, this is defined to nothing.
+ *
+ * Most apps don't need to, and should not, use this directly.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_ALLOC_SIZE(p) __attribute__((alloc_size(p)))
+
+/**
+ * A macro to tag a pointer variable, to help with pointer aliasing.
+ *
+ * A good explanation of the restrict keyword is here:
+ *
+ * https://en.wikipedia.org/wiki/Restrict
+ *
+ * On compilers without restrict support, this is defined to nothing.
+ *
+ * \since This macro is available since SDL 3.4.0.
+ */
+#define SDL_RESTRICT __restrict
+
+/**
+ * Check if the compiler supports a given builtin functionality.
+ *
+ * This allows preprocessor checks for things that otherwise might fail to
+ * compile.
+ *
+ * Supported by virtually all clang versions and more-recent GCCs. Use this
+ * instead of checking the clang version if possible.
+ *
+ * On compilers without has_builtin support, this is defined to 0 (always
+ * false).
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_HAS_BUILTIN(x) __has_builtin(x)
+
+/**
+ * A macro to specify data alignment.
+ *
+ * This informs the compiler that a given datatype or variable must be aligned
+ * to a specific byte count.
+ *
+ * For example:
+ *
+ * ```c
+ * // make sure this is struct is aligned to 16 bytes for SIMD access.
+ * typedef struct {
+ *    float x, y, z, w;
+ * } SDL_ALIGNED(16) MySIMDAlignedData;
+ *
+ * // make sure this one field in a struct is aligned to 16 bytes for SIMD access.
+ * typedef struct {
+ *    SomeStuff stuff;
+ *    float SDL_ALIGNED(16) position[4];
+ *    SomeOtherStuff other_stuff;
+ * } MyStruct;
+ *
+ * // make sure this variable is aligned to 32 bytes.
+ * int SDL_ALIGNED(32) myval = 0;
+ * ```
+ *
+ * Alignment is only guaranteed for things the compiler places: local
+ * variables on the stack and global/static variables. To dynamically allocate
+ * something that respects this alignment, use SDL_aligned_alloc() or some
+ * other mechanism.
+ *
+ * On compilers without alignment support, this macro is defined to an invalid
+ * symbol, to make it clear that the current compiler is likely to generate
+ * incorrect code when it sees this macro.
+ *
+ * \param x the byte count to align to, so the data's address will be a
+ *          multiple of this value.
+ *
+ * \since This macro is available since SDL 3.4.0.
+ */
+#define SDL_ALIGNED(x) __attribute__((aligned(x)))
+
+/* end of wiki documentation section. */
+#endif
+
+/* `restrict` is from C99, but __restrict works with both Visual Studio and GCC. */
+#ifndef SDL_RESTRICT
+#  if defined(restrict) || ((defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)))
+#    define SDL_RESTRICT restrict
+#  elif defined(_MSC_VER) || defined(__GNUC__) || defined(__clang__)
+#    define SDL_RESTRICT __restrict
+#  else
+#    define SDL_RESTRICT
+#  endif
+#endif
+
+#ifndef SDL_HAS_BUILTIN
+#ifdef __has_builtin
+#define SDL_HAS_BUILTIN(x) __has_builtin(x)
+#else
+#define SDL_HAS_BUILTIN(x) 0
+#endif
+#endif
+
+#ifndef SDL_DEPRECATED
+#  if defined(__GNUC__) && (__GNUC__ >= 4)  /* technically, this arrived in gcc 3.1, but oh well. */
+#    define SDL_DEPRECATED __attribute__((deprecated))
+#  elif defined(_MSC_VER)
+#    define SDL_DEPRECATED __declspec(deprecated)
+#  else
+#    define SDL_DEPRECATED
+#  endif
+#endif
+
+#ifndef SDL_UNUSED
+#  ifdef __GNUC__
+#    define SDL_UNUSED __attribute__((unused))
+#  else
+#    define SDL_UNUSED
+#  endif
+#endif
+
+/* Some compilers use a special export keyword */
+#ifndef SDL_DECLSPEC
+# if defined(SDL_PLATFORM_WINDOWS)
+#  ifdef DLL_EXPORT
+#   define SDL_DECLSPEC __declspec(dllexport)
+#  else
+#   define SDL_DECLSPEC
+#  endif
+# else
+#  if defined(__GNUC__) && __GNUC__ >= 4
+#   define SDL_DECLSPEC __attribute__ ((visibility("default")))
+#  else
+#   define SDL_DECLSPEC
+#  endif
+# endif
+#endif
+
+/* By default SDL uses the C calling convention */
+#ifndef SDLCALL
+#if defined(SDL_PLATFORM_WINDOWS) && !defined(__GNUC__)
+#define SDLCALL __cdecl
+#else
+#define SDLCALL
+#endif
+#endif /* SDLCALL */
+
+/* Force structure packing at 4 byte alignment.
+   This is necessary if the header is included in code which has structure
+   packing set to an alternate value, say for loading structures from disk.
+   The packing is reset to the previous value in SDL_close_code.h
+ */
+#if defined(_MSC_VER) || defined(__MWERKS__) || defined(__BORLANDC__)
+#ifdef _MSC_VER
+#pragma warning(disable: 4103)
+#endif
+#ifdef __clang__
+#pragma clang diagnostic ignored "-Wpragma-pack"
+#endif
+#ifdef __BORLANDC__
+#pragma nopackwarning
+#endif
+#ifdef _WIN64
+/* Use 8-byte alignment on 64-bit architectures, so pointers are aligned */
+#pragma pack(push,8)
+#else
+#pragma pack(push,4)
+#endif
+#endif /* Compiler needs structure packing set */
+
+#ifndef SDL_INLINE
+#ifdef __GNUC__
+#define SDL_INLINE __inline__
+#elif defined(_MSC_VER) || defined(__BORLANDC__) || \
+      defined(__DMC__) || defined(__SC__) || \
+      defined(__WATCOMC__) || defined(__LCC__) || \
+      defined(__DECC) || defined(__CC_ARM)
+#define SDL_INLINE __inline
+#ifndef __inline__
+#define __inline__ __inline
+#endif
+#else
+#define SDL_INLINE inline
+#ifndef __inline__
+#define __inline__ inline
+#endif
+#endif
+#endif /* SDL_INLINE not defined */
+
+#ifndef SDL_FORCE_INLINE
+#if defined(_MSC_VER) && (_MSC_VER >= 1200)
+#define SDL_FORCE_INLINE __forceinline
+#elif ( (defined(__GNUC__) && (__GNUC__ >= 4)) || defined(__clang__) )
+#define SDL_FORCE_INLINE __attribute__((always_inline)) static __inline__
+#else
+#define SDL_FORCE_INLINE static SDL_INLINE
+#endif
+#endif /* SDL_FORCE_INLINE not defined */
+
+#ifndef SDL_NORETURN
+#if defined(__GNUC__)
+#define SDL_NORETURN __attribute__((noreturn))
+#elif defined(_MSC_VER)
+#define SDL_NORETURN __declspec(noreturn)
+#else
+#define SDL_NORETURN
+#endif
+#endif /* SDL_NORETURN not defined */
+
+#ifdef __clang__
+#if __has_feature(attribute_analyzer_noreturn)
+#define SDL_ANALYZER_NORETURN __attribute__((analyzer_noreturn))
+#endif
+#endif
+
+#ifndef SDL_ANALYZER_NORETURN
+#define SDL_ANALYZER_NORETURN
+#endif
+
+/* Apparently this is needed by several Windows compilers */
+#ifndef __MACH__
+#ifndef NULL
+#ifdef __cplusplus
+#define NULL 0
+#else
+#define NULL ((void *)0)
+#endif
+#endif /* NULL */
+#endif /* ! macOS - breaks precompiled headers */
+
+#ifndef SDL_FALLTHROUGH
+#if (defined(__cplusplus) && __cplusplus >= 201703L) || \
+    (defined(__STDC_VERSION__) && __STDC_VERSION__ >= 202000L)
+#define SDL_FALLTHROUGH [[fallthrough]]
+#else
+#if defined(__has_attribute) && !defined(__SUNPRO_C) && !defined(__SUNPRO_CC)
+#define SDL_HAS_FALLTHROUGH __has_attribute(__fallthrough__)
+#else
+#define SDL_HAS_FALLTHROUGH 0
+#endif /* __has_attribute */
+#if SDL_HAS_FALLTHROUGH && \
+   ((defined(__GNUC__) && __GNUC__ >= 7) || \
+    (defined(__clang_major__) && __clang_major__ >= 10))
+#define SDL_FALLTHROUGH __attribute__((__fallthrough__))
+#else
+#define SDL_FALLTHROUGH do {} while (0) /* fallthrough */
+#endif /* SDL_HAS_FALLTHROUGH */
+#undef SDL_HAS_FALLTHROUGH
+#endif /* C++17 or C2x */
+#endif /* SDL_FALLTHROUGH not defined */
+
+#ifndef SDL_NODISCARD
+#if (defined(__cplusplus) && __cplusplus >= 201703L) || \
+    (defined(__STDC_VERSION__) && __STDC_VERSION__ >= 202311L)
+#define SDL_NODISCARD [[nodiscard]]
+#elif ( (defined(__GNUC__) && (__GNUC__ >= 4)) || defined(__clang__) )
+#define SDL_NODISCARD __attribute__((warn_unused_result))
+#elif defined(_MSC_VER) && (_MSC_VER >= 1700)
+#define SDL_NODISCARD _Check_return_
+#else
+#define SDL_NODISCARD
+#endif /* C++17 or C23 */
+#endif /* SDL_NODISCARD not defined */
+
+#ifndef SDL_MALLOC
+#if defined(__GNUC__) && (__GNUC__ >= 3)
+#define SDL_MALLOC __attribute__((malloc))
+/** FIXME
+#elif defined(_MSC_VER)
+#define SDL_MALLOC __declspec(allocator) __desclspec(restrict)
+**/
+#else
+#define SDL_MALLOC
+#endif
+#endif /* SDL_MALLOC not defined */
+
+#ifndef SDL_ALLOC_SIZE
+#if (defined(__clang__) && __clang_major__ >= 4) || (defined(__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)))
+#define SDL_ALLOC_SIZE(p) __attribute__((alloc_size(p)))
+#elif defined(_MSC_VER)
+#define SDL_ALLOC_SIZE(p)
+#else
+#define SDL_ALLOC_SIZE(p)
+#endif
+#endif /* SDL_ALLOC_SIZE not defined */
+
+#ifndef SDL_ALLOC_SIZE2
+#if (defined(__clang__) && __clang_major__ >= 4) || (defined(__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)))
+#define SDL_ALLOC_SIZE2(p1, p2) __attribute__((alloc_size(p1, p2)))
+#elif defined(_MSC_VER)
+#define SDL_ALLOC_SIZE2(p1, p2)
+#else
+#define SDL_ALLOC_SIZE2(p1, p2)
+#endif
+#endif /* SDL_ALLOC_SIZE2 not defined */
+
+#ifndef SDL_ALIGNED
+#if defined(__clang__) || defined(__GNUC__)
+#define SDL_ALIGNED(x) __attribute__((aligned(x)))
+#elif defined(_MSC_VER)
+#define SDL_ALIGNED(x) __declspec(align(x))
+#elif defined(__cplusplus) && (__cplusplus >= 201103L)
+#define SDL_ALIGNED(x) alignas(x)
+#elif defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 201112L)
+#define SDL_ALIGNED(x) _Alignas(x)
+#else
+#define SDL_ALIGNED(x) PLEASE_DEFINE_SDL_ALIGNED
+#endif
+#endif /* SDL_ALIGNED not defined */
+

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_bits.h

@@ -0,0 +1,147 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryBits
+ *
+ * Functions for fiddling with bits and bitmasks.
+ */
+
+#ifndef SDL_bits_h_
+#define SDL_bits_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(__WATCOMC__) && defined(__386__)
+extern __inline int _SDL_bsr_watcom(Uint32);
+#pragma aux _SDL_bsr_watcom = \
+    "bsr eax, eax" \
+    parm [eax] nomemory \
+    value [eax] \
+    modify exact [eax] nomemory;
+#endif
+
+/**
+ * Get the index of the most significant (set) bit in a 32-bit number.
+ *
+ * Result is undefined when called with 0. This operation can also be stated
+ * as "count leading zeroes" and "log base 2".
+ *
+ * Note that this is a forced-inline function in a header, and not a public
+ * API function available in the SDL library (which is to say, the code is
+ * embedded in the calling program and the linker and dynamic loader will not
+ * be able to find this function inside SDL itself).
+ *
+ * \param x the 32-bit value to examine.
+ * \returns the index of the most significant bit, or -1 if the value is 0.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+SDL_FORCE_INLINE int SDL_MostSignificantBitIndex32(Uint32 x)
+{
+#if defined(__GNUC__) && (__GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4))
+    /* Count Leading Zeroes builtin in GCC.
+     * http://gcc.gnu.org/onlinedocs/gcc-4.3.4/gcc/Other-Builtins.html
+     */
+    if (x == 0) {
+        return -1;
+    }
+    return 31 - __builtin_clz(x);
+#elif defined(__WATCOMC__) && defined(__386__)
+    if (x == 0) {
+        return -1;
+    }
+    return _SDL_bsr_watcom(x);
+#elif defined(_MSC_VER) && _MSC_VER >= 1400
+    unsigned long index;
+    if (_BitScanReverse(&index, x)) {
+        return (int)index;
+    }
+    return -1;
+#else
+    /* Based off of Bit Twiddling Hacks by Sean Eron Anderson
+     * <seander@cs.stanford.edu>, released in the public domain.
+     * http://graphics.stanford.edu/~seander/bithacks.html#IntegerLog
+     */
+    const Uint32 b[] = {0x2, 0xC, 0xF0, 0xFF00, 0xFFFF0000};
+    const int    S[] = {1, 2, 4, 8, 16};
+
+    int msbIndex = 0;
+    int i;
+
+    if (x == 0) {
+        return -1;
+    }
+
+    for (i = 4; i >= 0; i--)
+    {
+        if (x & b[i])
+        {
+            x >>= S[i];
+            msbIndex |= S[i];
+        }
+    }
+
+    return msbIndex;
+#endif
+}
+
+/**
+ * Determine if a unsigned 32-bit value has exactly one bit set.
+ *
+ * If there are no bits set (`x` is zero), or more than one bit set, this
+ * returns false. If any one bit is exclusively set, this returns true.
+ *
+ * Note that this is a forced-inline function in a header, and not a public
+ * API function available in the SDL library (which is to say, the code is
+ * embedded in the calling program and the linker and dynamic loader will not
+ * be able to find this function inside SDL itself).
+ *
+ * \param x the 32-bit value to examine.
+ * \returns true if exactly one bit is set in `x`, false otherwise.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+SDL_FORCE_INLINE bool SDL_HasExactlyOneBitSet32(Uint32 x)
+{
+    if (x && !(x & (x - 1))) {
+        return true;
+    }
+    return false;
+}
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_bits_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_blendmode.h

@@ -0,0 +1,202 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryBlendmode
+ *
+ * Blend modes decide how two colors will mix together. There are both
+ * standard modes for basic needs and a means to create custom modes,
+ * dictating what sort of math to do on what color components.
+ */
+
+#ifndef SDL_blendmode_h_
+#define SDL_blendmode_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * A set of blend modes used in drawing operations.
+ *
+ * These predefined blend modes are supported everywhere.
+ *
+ * Additional values may be obtained from SDL_ComposeCustomBlendMode.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_ComposeCustomBlendMode
+ */
+typedef Uint32 SDL_BlendMode;
+
+#define SDL_BLENDMODE_NONE                  0x00000000u /**< no blending: dstRGBA = srcRGBA */
+#define SDL_BLENDMODE_BLEND                 0x00000001u /**< alpha blending: dstRGB = (srcRGB * srcA) + (dstRGB * (1-srcA)), dstA = srcA + (dstA * (1-srcA)) */
+#define SDL_BLENDMODE_BLEND_PREMULTIPLIED   0x00000010u /**< pre-multiplied alpha blending: dstRGBA = srcRGBA + (dstRGBA * (1-srcA)) */
+#define SDL_BLENDMODE_ADD                   0x00000002u /**< additive blending: dstRGB = (srcRGB * srcA) + dstRGB, dstA = dstA */
+#define SDL_BLENDMODE_ADD_PREMULTIPLIED     0x00000020u /**< pre-multiplied additive blending: dstRGB = srcRGB + dstRGB, dstA = dstA */
+#define SDL_BLENDMODE_MOD                   0x00000004u /**< color modulate: dstRGB = srcRGB * dstRGB, dstA = dstA */
+#define SDL_BLENDMODE_MUL                   0x00000008u /**< color multiply: dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA)), dstA = dstA */
+#define SDL_BLENDMODE_INVALID               0x7FFFFFFFu
+
+/**
+ * The blend operation used when combining source and destination pixel
+ * components.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_BlendOperation
+{
+    SDL_BLENDOPERATION_ADD              = 0x1,  /**< dst + src: supported by all renderers */
+    SDL_BLENDOPERATION_SUBTRACT         = 0x2,  /**< src - dst : supported by D3D, OpenGL, OpenGLES, and Vulkan */
+    SDL_BLENDOPERATION_REV_SUBTRACT     = 0x3,  /**< dst - src : supported by D3D, OpenGL, OpenGLES, and Vulkan */
+    SDL_BLENDOPERATION_MINIMUM          = 0x4,  /**< min(dst, src) : supported by D3D, OpenGL, OpenGLES, and Vulkan */
+    SDL_BLENDOPERATION_MAXIMUM          = 0x5   /**< max(dst, src) : supported by D3D, OpenGL, OpenGLES, and Vulkan */
+} SDL_BlendOperation;
+
+/**
+ * The normalized factor used to multiply pixel components.
+ *
+ * The blend factors are multiplied with the pixels from a drawing operation
+ * (src) and the pixels from the render target (dst) before the blend
+ * operation. The comma-separated factors listed above are always applied in
+ * the component order red, green, blue, and alpha.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_BlendFactor
+{
+    SDL_BLENDFACTOR_ZERO                = 0x1,  /**< 0, 0, 0, 0 */
+    SDL_BLENDFACTOR_ONE                 = 0x2,  /**< 1, 1, 1, 1 */
+    SDL_BLENDFACTOR_SRC_COLOR           = 0x3,  /**< srcR, srcG, srcB, srcA */
+    SDL_BLENDFACTOR_ONE_MINUS_SRC_COLOR = 0x4,  /**< 1-srcR, 1-srcG, 1-srcB, 1-srcA */
+    SDL_BLENDFACTOR_SRC_ALPHA           = 0x5,  /**< srcA, srcA, srcA, srcA */
+    SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA = 0x6,  /**< 1-srcA, 1-srcA, 1-srcA, 1-srcA */
+    SDL_BLENDFACTOR_DST_COLOR           = 0x7,  /**< dstR, dstG, dstB, dstA */
+    SDL_BLENDFACTOR_ONE_MINUS_DST_COLOR = 0x8,  /**< 1-dstR, 1-dstG, 1-dstB, 1-dstA */
+    SDL_BLENDFACTOR_DST_ALPHA           = 0x9,  /**< dstA, dstA, dstA, dstA */
+    SDL_BLENDFACTOR_ONE_MINUS_DST_ALPHA = 0xA   /**< 1-dstA, 1-dstA, 1-dstA, 1-dstA */
+} SDL_BlendFactor;
+
+/**
+ * Compose a custom blend mode for renderers.
+ *
+ * The functions SDL_SetRenderDrawBlendMode and SDL_SetTextureBlendMode accept
+ * the SDL_BlendMode returned by this function if the renderer supports it.
+ *
+ * A blend mode controls how the pixels from a drawing operation (source) get
+ * combined with the pixels from the render target (destination). First, the
+ * components of the source and destination pixels get multiplied with their
+ * blend factors. Then, the blend operation takes the two products and
+ * calculates the result that will get stored in the render target.
+ *
+ * Expressed in pseudocode, it would look like this:
+ *
+ * ```c
+ * dstRGB = colorOperation(srcRGB * srcColorFactor, dstRGB * dstColorFactor);
+ * dstA = alphaOperation(srcA * srcAlphaFactor, dstA * dstAlphaFactor);
+ * ```
+ *
+ * Where the functions `colorOperation(src, dst)` and `alphaOperation(src,
+ * dst)` can return one of the following:
+ *
+ * - `src + dst`
+ * - `src - dst`
+ * - `dst - src`
+ * - `min(src, dst)`
+ * - `max(src, dst)`
+ *
+ * The red, green, and blue components are always multiplied with the first,
+ * second, and third components of the SDL_BlendFactor, respectively. The
+ * fourth component is not used.
+ *
+ * The alpha component is always multiplied with the fourth component of the
+ * SDL_BlendFactor. The other components are not used in the alpha
+ * calculation.
+ *
+ * Support for these blend modes varies for each renderer. To check if a
+ * specific SDL_BlendMode is supported, create a renderer and pass it to
+ * either SDL_SetRenderDrawBlendMode or SDL_SetTextureBlendMode. They will
+ * return with an error if the blend mode is not supported.
+ *
+ * This list describes the support of custom blend modes for each renderer.
+ * All renderers support the four blend modes listed in the SDL_BlendMode
+ * enumeration.
+ *
+ * - **direct3d**: Supports all operations with all factors. However, some
+ *   factors produce unexpected results with `SDL_BLENDOPERATION_MINIMUM` and
+ *   `SDL_BLENDOPERATION_MAXIMUM`.
+ * - **direct3d11**: Same as Direct3D 9.
+ * - **opengl**: Supports the `SDL_BLENDOPERATION_ADD` operation with all
+ *   factors. OpenGL versions 1.1, 1.2, and 1.3 do not work correctly here.
+ * - **opengles2**: Supports the `SDL_BLENDOPERATION_ADD`,
+ *   `SDL_BLENDOPERATION_SUBTRACT`, `SDL_BLENDOPERATION_REV_SUBTRACT`
+ *   operations with all factors.
+ * - **psp**: No custom blend mode support.
+ * - **software**: No custom blend mode support.
+ *
+ * Some renderers do not provide an alpha component for the default render
+ * target. The `SDL_BLENDFACTOR_DST_ALPHA` and
+ * `SDL_BLENDFACTOR_ONE_MINUS_DST_ALPHA` factors do not have an effect in this
+ * case.
+ *
+ * \param srcColorFactor the SDL_BlendFactor applied to the red, green, and
+ *                       blue components of the source pixels.
+ * \param dstColorFactor the SDL_BlendFactor applied to the red, green, and
+ *                       blue components of the destination pixels.
+ * \param colorOperation the SDL_BlendOperation used to combine the red,
+ *                       green, and blue components of the source and
+ *                       destination pixels.
+ * \param srcAlphaFactor the SDL_BlendFactor applied to the alpha component of
+ *                       the source pixels.
+ * \param dstAlphaFactor the SDL_BlendFactor applied to the alpha component of
+ *                       the destination pixels.
+ * \param alphaOperation the SDL_BlendOperation used to combine the alpha
+ *                       component of the source and destination pixels.
+ * \returns an SDL_BlendMode that represents the chosen factors and
+ *          operations.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetRenderDrawBlendMode
+ * \sa SDL_GetRenderDrawBlendMode
+ * \sa SDL_SetTextureBlendMode
+ * \sa SDL_GetTextureBlendMode
+ */
+extern SDL_DECLSPEC SDL_BlendMode SDLCALL SDL_ComposeCustomBlendMode(SDL_BlendFactor srcColorFactor,
+                                                                 SDL_BlendFactor dstColorFactor,
+                                                                 SDL_BlendOperation colorOperation,
+                                                                 SDL_BlendFactor srcAlphaFactor,
+                                                                 SDL_BlendFactor dstAlphaFactor,
+                                                                 SDL_BlendOperation alphaOperation);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_blendmode_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_camera.h

@@ -0,0 +1,535 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryCamera
+ *
+ * Video capture for the SDL library.
+ *
+ * This API lets apps read input from video sources, like webcams. Camera
+ * devices can be enumerated, queried, and opened. Once opened, it will
+ * provide SDL_Surface objects as new frames of video come in. These surfaces
+ * can be uploaded to an SDL_Texture or processed as pixels in memory.
+ *
+ * Several platforms will alert the user if an app tries to access a camera,
+ * and some will present a UI asking the user if your application should be
+ * allowed to obtain images at all, which they can deny. A successfully opened
+ * camera will not provide images until permission is granted. Applications,
+ * after opening a camera device, can see if they were granted access by
+ * either polling with the SDL_GetCameraPermissionState() function, or waiting
+ * for an SDL_EVENT_CAMERA_DEVICE_APPROVED or SDL_EVENT_CAMERA_DEVICE_DENIED
+ * event. Platforms that don't have any user approval process will report
+ * approval immediately.
+ *
+ * Note that SDL cameras only provide video as individual frames; they will
+ * not provide full-motion video encoded in a movie file format, although an
+ * app is free to encode the acquired frames into any format it likes. It also
+ * does not provide audio from the camera hardware through this API; not only
+ * do many webcams not have microphones at all, many people--from streamers to
+ * people on Zoom calls--will want to use a separate microphone regardless of
+ * the camera. In any case, recorded audio will be available through SDL's
+ * audio API no matter what hardware provides the microphone.
+ *
+ * ## Camera gotchas
+ *
+ * Consumer-level camera hardware tends to take a little while to warm up,
+ * once the device has been opened. Generally most camera apps have some sort
+ * of UI to take a picture (a button to snap a pic while a preview is showing,
+ * some sort of multi-second countdown for the user to pose, like a photo
+ * booth), which puts control in the users' hands, or they are intended to
+ * stay on for long times (Pokemon Go, etc).
+ *
+ * It's not uncommon that a newly-opened camera will provide a couple of
+ * completely black frames, maybe followed by some under-exposed images. If
+ * taking a single frame automatically, or recording video from a camera's
+ * input without the user initiating it from a preview, it could be wise to
+ * drop the first several frames (if not the first several _seconds_ worth of
+ * frames!) before using images from a camera.
+ */
+
+#ifndef SDL_camera_h_
+#define SDL_camera_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_pixels.h>
+#include <SDL3/SDL_properties.h>
+#include <SDL3/SDL_surface.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * This is a unique ID for a camera device for the time it is connected to the
+ * system, and is never reused for the lifetime of the application.
+ *
+ * If the device is disconnected and reconnected, it will get a new ID.
+ *
+ * The value 0 is an invalid ID.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameras
+ */
+typedef Uint32 SDL_CameraID;
+
+/**
+ * The opaque structure used to identify an opened SDL camera.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_Camera SDL_Camera;
+
+/**
+ * The details of an output format for a camera device.
+ *
+ * Cameras often support multiple formats; each one will be encapsulated in
+ * this struct.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameraSupportedFormats
+ * \sa SDL_GetCameraFormat
+ */
+typedef struct SDL_CameraSpec
+{
+    SDL_PixelFormat format;     /**< Frame format */
+    SDL_Colorspace colorspace;  /**< Frame colorspace */
+    int width;                  /**< Frame width */
+    int height;                 /**< Frame height */
+    int framerate_numerator;     /**< Frame rate numerator ((num / denom) == FPS, (denom / num) == duration in seconds) */
+    int framerate_denominator;   /**< Frame rate denominator ((num / denom) == FPS, (denom / num) == duration in seconds) */
+} SDL_CameraSpec;
+
+/**
+ * The position of camera in relation to system device.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameraPosition
+ */
+typedef enum SDL_CameraPosition
+{
+    SDL_CAMERA_POSITION_UNKNOWN,
+    SDL_CAMERA_POSITION_FRONT_FACING,
+    SDL_CAMERA_POSITION_BACK_FACING
+} SDL_CameraPosition;
+
+/**
+ * The current state of a request for camera access.
+ *
+ * \since This enum is available since SDL 3.4.0.
+ *
+ * \sa SDL_GetCameraPermissionState
+ */
+typedef enum SDL_CameraPermissionState
+{
+    SDL_CAMERA_PERMISSION_STATE_DENIED = -1,
+    SDL_CAMERA_PERMISSION_STATE_PENDING,
+    SDL_CAMERA_PERMISSION_STATE_APPROVED,
+} SDL_CameraPermissionState;
+
+
+/**
+ * Use this function to get the number of built-in camera drivers.
+ *
+ * This function returns a hardcoded number. This never returns a negative
+ * value; if there are no drivers compiled into this build of SDL, this
+ * function returns zero. The presence of a driver in this list does not mean
+ * it will function, it just means SDL is capable of interacting with that
+ * interface. For example, a build of SDL might have v4l2 support, but if
+ * there's no kernel support available, SDL's v4l2 driver would fail if used.
+ *
+ * By default, SDL tries all drivers, in its preferred order, until one is
+ * found to be usable.
+ *
+ * \returns the number of built-in camera drivers.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameraDriver
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_GetNumCameraDrivers(void);
+
+/**
+ * Use this function to get the name of a built in camera driver.
+ *
+ * The list of camera drivers is given in the order that they are normally
+ * initialized by default; the drivers that seem more reasonable to choose
+ * first (as far as the SDL developers believe) are earlier in the list.
+ *
+ * The names of drivers are all simple, low-ASCII identifiers, like "v4l2",
+ * "coremedia" or "android". These never have Unicode characters, and are not
+ * meant to be proper names.
+ *
+ * \param index the index of the camera driver; the value ranges from 0 to
+ *              SDL_GetNumCameraDrivers() - 1.
+ * \returns the name of the camera driver at the requested index, or NULL if
+ *          an invalid index was specified.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetNumCameraDrivers
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetCameraDriver(int index);
+
+/**
+ * Get the name of the current camera driver.
+ *
+ * The names of drivers are all simple, low-ASCII identifiers, like "v4l2",
+ * "coremedia" or "android". These never have Unicode characters, and are not
+ * meant to be proper names.
+ *
+ * \returns the name of the current camera driver or NULL if no driver has
+ *          been initialized.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetCurrentCameraDriver(void);
+
+/**
+ * Get a list of currently connected camera devices.
+ *
+ * \param count a pointer filled in with the number of cameras returned, may
+ *              be NULL.
+ * \returns a 0 terminated array of camera instance IDs or NULL on failure;
+ *          call SDL_GetError() for more information. This should be freed
+ *          with SDL_free() when it is no longer needed.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_OpenCamera
+ */
+extern SDL_DECLSPEC SDL_CameraID * SDLCALL SDL_GetCameras(int *count);
+
+/**
+ * Get the list of native formats/sizes a camera supports.
+ *
+ * This returns a list of all formats and frame sizes that a specific camera
+ * can offer. This is useful if your app can accept a variety of image formats
+ * and sizes and so want to find the optimal spec that doesn't require
+ * conversion.
+ *
+ * This function isn't strictly required; if you call SDL_OpenCamera with a
+ * NULL spec, SDL will choose a native format for you, and if you instead
+ * specify a desired format, it will transparently convert to the requested
+ * format on your behalf.
+ *
+ * If `count` is not NULL, it will be filled with the number of elements in
+ * the returned array.
+ *
+ * Note that it's legal for a camera to supply an empty list. This is what
+ * will happen on Emscripten builds, since that platform won't tell _anything_
+ * about available cameras until you've opened one, and won't even tell if
+ * there _is_ a camera until the user has given you permission to check
+ * through a scary warning popup.
+ *
+ * \param instance_id the camera device instance ID.
+ * \param count a pointer filled in with the number of elements in the list,
+ *              may be NULL.
+ * \returns a NULL terminated array of pointers to SDL_CameraSpec or NULL on
+ *          failure; call SDL_GetError() for more information. This is a
+ *          single allocation that should be freed with SDL_free() when it is
+ *          no longer needed.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameras
+ * \sa SDL_OpenCamera
+ */
+extern SDL_DECLSPEC SDL_CameraSpec ** SDLCALL SDL_GetCameraSupportedFormats(SDL_CameraID instance_id, int *count);
+
+/**
+ * Get the human-readable device name for a camera.
+ *
+ * \param instance_id the camera device instance ID.
+ * \returns a human-readable device name or NULL on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameras
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetCameraName(SDL_CameraID instance_id);
+
+/**
+ * Get the position of the camera in relation to the system.
+ *
+ * Most platforms will report UNKNOWN, but mobile devices, like phones, can
+ * often make a distinction between cameras on the front of the device (that
+ * points towards the user, for taking "selfies") and cameras on the back (for
+ * filming in the direction the user is facing).
+ *
+ * \param instance_id the camera device instance ID.
+ * \returns the position of the camera on the system hardware.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameras
+ */
+extern SDL_DECLSPEC SDL_CameraPosition SDLCALL SDL_GetCameraPosition(SDL_CameraID instance_id);
+
+/**
+ * Open a video recording device (a "camera").
+ *
+ * You can open the device with any reasonable spec, and if the hardware can't
+ * directly support it, it will convert data seamlessly to the requested
+ * format. This might incur overhead, including scaling of image data.
+ *
+ * If you would rather accept whatever format the device offers, you can pass
+ * a NULL spec here and it will choose one for you (and you can use
+ * SDL_Surface's conversion/scaling functions directly if necessary).
+ *
+ * You can call SDL_GetCameraFormat() to get the actual data format if passing
+ * a NULL spec here. You can see the exact specs a device can support without
+ * conversion with SDL_GetCameraSupportedFormats().
+ *
+ * SDL will not attempt to emulate framerate; it will try to set the hardware
+ * to the rate closest to the requested speed, but it won't attempt to limit
+ * or duplicate frames artificially; call SDL_GetCameraFormat() to see the
+ * actual framerate of the opened the device, and check your timestamps if
+ * this is crucial to your app!
+ *
+ * Note that the camera is not usable until the user approves its use! On some
+ * platforms, the operating system will prompt the user to permit access to
+ * the camera, and they can choose Yes or No at that point. Until they do, the
+ * camera will not be usable. The app should either wait for an
+ * SDL_EVENT_CAMERA_DEVICE_APPROVED (or SDL_EVENT_CAMERA_DEVICE_DENIED) event,
+ * or poll SDL_GetCameraPermissionState() occasionally until it returns
+ * non-zero. On platforms that don't require explicit user approval (and
+ * perhaps in places where the user previously permitted access), the approval
+ * event might come immediately, but it might come seconds, minutes, or hours
+ * later!
+ *
+ * \param instance_id the camera device instance ID.
+ * \param spec the desired format for data the device will provide. Can be
+ *             NULL.
+ * \returns an SDL_Camera object or NULL on failure; call SDL_GetError() for
+ *          more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetCameras
+ * \sa SDL_GetCameraFormat
+ */
+extern SDL_DECLSPEC SDL_Camera * SDLCALL SDL_OpenCamera(SDL_CameraID instance_id, const SDL_CameraSpec *spec);
+
+/**
+ * Query if camera access has been approved by the user.
+ *
+ * Cameras will not function between when the device is opened by the app and
+ * when the user permits access to the hardware. On some platforms, this
+ * presents as a popup dialog where the user has to explicitly approve access;
+ * on others the approval might be implicit and not alert the user at all.
+ *
+ * This function can be used to check the status of that approval. It will
+ * return SDL_CAMERA_PERMISSION_STATE_PENDING if waiting for user response,
+ * SDL_CAMERA_PERMISSION_STATE_APPROVED if the camera is approved for use, and
+ * SDL_CAMERA_PERMISSION_STATE_DENIED if the user denied access.
+ *
+ * Instead of polling with this function, you can wait for a
+ * SDL_EVENT_CAMERA_DEVICE_APPROVED (or SDL_EVENT_CAMERA_DEVICE_DENIED) event
+ * in the standard SDL event loop, which is guaranteed to be sent once when
+ * permission to use the camera is decided.
+ *
+ * If a camera is declined, there's nothing to be done but call
+ * SDL_CloseCamera() to dispose of it.
+ *
+ * \param camera the opened camera device to query.
+ * \returns an SDL_CameraPermissionState value indicating if access is
+ *          granted, or `SDL_CAMERA_PERMISSION_STATE_PENDING` if the decision
+ *          is still pending.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_OpenCamera
+ * \sa SDL_CloseCamera
+ */
+extern SDL_DECLSPEC SDL_CameraPermissionState SDLCALL SDL_GetCameraPermissionState(SDL_Camera *camera);
+
+/**
+ * Get the instance ID of an opened camera.
+ *
+ * \param camera an SDL_Camera to query.
+ * \returns the instance ID of the specified camera on success or 0 on
+ *          failure; call SDL_GetError() for more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_OpenCamera
+ */
+extern SDL_DECLSPEC SDL_CameraID SDLCALL SDL_GetCameraID(SDL_Camera *camera);
+
+/**
+ * Get the properties associated with an opened camera.
+ *
+ * \param camera the SDL_Camera obtained from SDL_OpenCamera().
+ * \returns a valid property ID on success or 0 on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC SDL_PropertiesID SDLCALL SDL_GetCameraProperties(SDL_Camera *camera);
+
+/**
+ * Get the spec that a camera is using when generating images.
+ *
+ * Note that this might not be the native format of the hardware, as SDL might
+ * be converting to this format behind the scenes.
+ *
+ * If the system is waiting for the user to approve access to the camera, as
+ * some platforms require, this will return false, but this isn't necessarily
+ * a fatal error; you should either wait for an
+ * SDL_EVENT_CAMERA_DEVICE_APPROVED (or SDL_EVENT_CAMERA_DEVICE_DENIED) event,
+ * or poll SDL_GetCameraPermissionState() occasionally until it returns
+ * non-zero.
+ *
+ * \param camera opened camera device.
+ * \param spec the SDL_CameraSpec to be initialized by this function.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_OpenCamera
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_GetCameraFormat(SDL_Camera *camera, SDL_CameraSpec *spec);
+
+/**
+ * Acquire a frame.
+ *
+ * The frame is a memory pointer to the image data, whose size and format are
+ * given by the spec requested when opening the device.
+ *
+ * This is a non blocking API. If there is a frame available, a non-NULL
+ * surface is returned, and timestampNS will be filled with a non-zero value.
+ *
+ * Note that an error case can also return NULL, but a NULL by itself is
+ * normal and just signifies that a new frame is not yet available. Note that
+ * even if a camera device fails outright (a USB camera is unplugged while in
+ * use, etc), SDL will send an event separately to notify the app, but
+ * continue to provide blank frames at ongoing intervals until
+ * SDL_CloseCamera() is called, so real failure here is almost always an out
+ * of memory condition.
+ *
+ * After use, the frame should be released with SDL_ReleaseCameraFrame(). If
+ * you don't do this, the system may stop providing more video!
+ *
+ * Do not call SDL_DestroySurface() on the returned surface! It must be given
+ * back to the camera subsystem with SDL_ReleaseCameraFrame!
+ *
+ * If the system is waiting for the user to approve access to the camera, as
+ * some platforms require, this will return NULL (no frames available); you
+ * should either wait for an SDL_EVENT_CAMERA_DEVICE_APPROVED (or
+ * SDL_EVENT_CAMERA_DEVICE_DENIED) event, or poll
+ * SDL_GetCameraPermissionState() occasionally until it returns non-zero.
+ *
+ * \param camera opened camera device.
+ * \param timestampNS a pointer filled in with the frame's timestamp, or 0 on
+ *                    error. Can be NULL.
+ * \returns a new frame of video on success, NULL if none is currently
+ *          available.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ReleaseCameraFrame
+ */
+extern SDL_DECLSPEC SDL_Surface * SDLCALL SDL_AcquireCameraFrame(SDL_Camera *camera, Uint64 *timestampNS);
+
+/**
+ * Release a frame of video acquired from a camera.
+ *
+ * Let the back-end re-use the internal buffer for camera.
+ *
+ * This function _must_ be called only on surface objects returned by
+ * SDL_AcquireCameraFrame(). This function should be called as quickly as
+ * possible after acquisition, as SDL keeps a small FIFO queue of surfaces for
+ * video frames; if surfaces aren't released in a timely manner, SDL may drop
+ * upcoming video frames from the camera.
+ *
+ * If the app needs to keep the surface for a significant time, they should
+ * make a copy of it and release the original.
+ *
+ * The app should not use the surface again after calling this function;
+ * assume the surface is freed and the pointer is invalid.
+ *
+ * \param camera opened camera device.
+ * \param frame the video frame surface to release.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_AcquireCameraFrame
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ReleaseCameraFrame(SDL_Camera *camera, SDL_Surface *frame);
+
+/**
+ * Use this function to shut down camera processing and close the camera
+ * device.
+ *
+ * \param camera opened camera device.
+ *
+ * \threadsafety It is safe to call this function from any thread, but no
+ *               thread may reference `device` once this function is called.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_OpenCamera
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_CloseCamera(SDL_Camera *camera);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_camera_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_clipboard.h

@@ -0,0 +1,331 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryClipboard
+ *
+ * SDL provides access to the system clipboard, both for reading information
+ * from other processes and publishing information of its own.
+ *
+ * This is not just text! SDL apps can access and publish data by mimetype.
+ *
+ * ## Basic use (text)
+ *
+ * Obtaining and publishing simple text to the system clipboard is as easy as
+ * calling SDL_GetClipboardText() and SDL_SetClipboardText(), respectively.
+ * These deal with C strings in UTF-8 encoding. Data transmission and encoding
+ * conversion is completely managed by SDL.
+ *
+ * ## Clipboard callbacks (data other than text)
+ *
+ * Things get more complicated when the clipboard contains something other
+ * than text. Not only can the system clipboard contain data of any type, in
+ * some cases it can contain the same data in different formats! For example,
+ * an image painting app might let the user copy a graphic to the clipboard,
+ * and offers it in .BMP, .JPG, or .PNG format for other apps to consume.
+ *
+ * Obtaining clipboard data ("pasting") like this is a matter of calling
+ * SDL_GetClipboardData() and telling it the mimetype of the data you want.
+ * But how does one know if that format is available? SDL_HasClipboardData()
+ * can report if a specific mimetype is offered, and
+ * SDL_GetClipboardMimeTypes() can provide the entire list of mimetypes
+ * available, so the app can decide what to do with the data and what formats
+ * it can support.
+ *
+ * Setting the clipboard ("copying") to arbitrary data is done with
+ * SDL_SetClipboardData. The app does not provide the data in this call, but
+ * rather the mimetypes it is willing to provide and a callback function.
+ * During the callback, the app will generate the data. This allows massive
+ * data sets to be provided to the clipboard, without any data being copied
+ * before it is explicitly requested. More specifically, it allows an app to
+ * offer data in multiple formats without providing a copy of all of them
+ * upfront. If the app has an image that it could provide in PNG or JPG
+ * format, it doesn't have to encode it to either of those unless and until
+ * something tries to paste it.
+ *
+ * ## Primary Selection
+ *
+ * The X11 and Wayland video targets have a concept of the "primary selection"
+ * in addition to the usual clipboard. This is generally highlighted (but not
+ * explicitly copied) text from various apps. SDL offers APIs for this through
+ * SDL_GetPrimarySelectionText() and SDL_SetPrimarySelectionText(). SDL offers
+ * these APIs on platforms without this concept, too, but only so far that it
+ * will keep a copy of a string that the app sets for later retrieval; the
+ * operating system will not ever attempt to change the string externally if
+ * it doesn't support a primary selection.
+ */
+
+#ifndef SDL_clipboard_h_
+#define SDL_clipboard_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Function prototypes */
+
+/**
+ * Put UTF-8 text into the clipboard.
+ *
+ * \param text the text to store in the clipboard.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetClipboardText
+ * \sa SDL_HasClipboardText
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetClipboardText(const char *text);
+
+/**
+ * Get UTF-8 text from the clipboard.
+ *
+ * This function returns an empty string if there is not enough memory left
+ * for a copy of the clipboard's content.
+ *
+ * \returns the clipboard text on success or an empty string on failure; call
+ *          SDL_GetError() for more information. This should be freed with
+ *          SDL_free() when it is no longer needed.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasClipboardText
+ * \sa SDL_SetClipboardText
+ */
+extern SDL_DECLSPEC char * SDLCALL SDL_GetClipboardText(void);
+
+/**
+ * Query whether the clipboard exists and contains a non-empty text string.
+ *
+ * \returns true if the clipboard has text, or false if it does not.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetClipboardText
+ * \sa SDL_SetClipboardText
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasClipboardText(void);
+
+/**
+ * Put UTF-8 text into the primary selection.
+ *
+ * \param text the text to store in the primary selection.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetPrimarySelectionText
+ * \sa SDL_HasPrimarySelectionText
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetPrimarySelectionText(const char *text);
+
+/**
+ * Get UTF-8 text from the primary selection.
+ *
+ * This function returns an empty string if there is not enough memory left
+ * for a copy of the primary selection's content.
+ *
+ * \returns the primary selection text on success or an empty string on
+ *          failure; call SDL_GetError() for more information. This should be
+ *          freed with SDL_free() when it is no longer needed.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasPrimarySelectionText
+ * \sa SDL_SetPrimarySelectionText
+ */
+extern SDL_DECLSPEC char * SDLCALL SDL_GetPrimarySelectionText(void);
+
+/**
+ * Query whether the primary selection exists and contains a non-empty text
+ * string.
+ *
+ * \returns true if the primary selection has text, or false if it does not.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetPrimarySelectionText
+ * \sa SDL_SetPrimarySelectionText
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasPrimarySelectionText(void);
+
+/**
+ * Callback function that will be called when data for the specified mime-type
+ * is requested by the OS.
+ *
+ * The callback function is called with NULL as the mime_type when the
+ * clipboard is cleared or new data is set. The clipboard is automatically
+ * cleared in SDL_Quit().
+ *
+ * \param userdata a pointer to the provided user data.
+ * \param mime_type the requested mime-type.
+ * \param size a pointer filled in with the length of the returned data.
+ * \returns a pointer to the data for the provided mime-type. Returning NULL
+ *          or setting the length to 0 will cause zero length data to be sent
+ *          to the "receiver", which should be able to handle this. The
+ *          returned data will not be freed, so it needs to be retained and
+ *          dealt with internally.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetClipboardData
+ */
+typedef const void *(SDLCALL *SDL_ClipboardDataCallback)(void *userdata, const char *mime_type, size_t *size);
+
+/**
+ * Callback function that will be called when the clipboard is cleared, or
+ * when new data is set.
+ *
+ * \param userdata a pointer to the provided user data.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetClipboardData
+ */
+typedef void (SDLCALL *SDL_ClipboardCleanupCallback)(void *userdata);
+
+/**
+ * Offer clipboard data to the OS.
+ *
+ * Tell the operating system that the application is offering clipboard data
+ * for each of the provided mime-types. Once another application requests the
+ * data the callback function will be called, allowing it to generate and
+ * respond with the data for the requested mime-type.
+ *
+ * The size of text data does not include any terminator, and the text does
+ * not need to be null-terminated (e.g., you can directly copy a portion of a
+ * document).
+ *
+ * \param callback a function pointer to the function that provides the
+ *                 clipboard data.
+ * \param cleanup a function pointer to the function that cleans up the
+ *                clipboard data.
+ * \param userdata an opaque pointer that will be forwarded to the callbacks.
+ * \param mime_types a list of mime-types that are being offered. SDL copies
+ *                   the given list.
+ * \param num_mime_types the number of mime-types in the mime_types list.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ClearClipboardData
+ * \sa SDL_GetClipboardData
+ * \sa SDL_HasClipboardData
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetClipboardData(SDL_ClipboardDataCallback callback, SDL_ClipboardCleanupCallback cleanup, void *userdata, const char **mime_types, size_t num_mime_types);
+
+/**
+ * Clear the clipboard data.
+ *
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetClipboardData
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_ClearClipboardData(void);
+
+/**
+ * Get the data from the clipboard for a given mime type.
+ *
+ * The size of text data does not include the terminator, but the text is
+ * guaranteed to be null-terminated.
+ *
+ * \param mime_type the mime type to read from the clipboard.
+ * \param size a pointer filled in with the length of the returned data.
+ * \returns the retrieved data buffer or NULL on failure; call SDL_GetError()
+ *          for more information. This should be freed with SDL_free() when it
+ *          is no longer needed.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasClipboardData
+ * \sa SDL_SetClipboardData
+ */
+extern SDL_DECLSPEC void * SDLCALL SDL_GetClipboardData(const char *mime_type, size_t *size);
+
+/**
+ * Query whether there is data in the clipboard for the provided mime type.
+ *
+ * \param mime_type the mime type to check for data.
+ * \returns true if data exists in the clipboard for the provided mime type,
+ *          false if it does not.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetClipboardData
+ * \sa SDL_GetClipboardData
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasClipboardData(const char *mime_type);
+
+/**
+ * Retrieve the list of mime types available in the clipboard.
+ *
+ * \param num_mime_types a pointer filled with the number of mime types, may
+ *                       be NULL.
+ * \returns a null-terminated array of strings with mime types, or NULL on
+ *          failure; call SDL_GetError() for more information. This should be
+ *          freed with SDL_free() when it is no longer needed.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetClipboardData
+ */
+extern SDL_DECLSPEC char ** SDLCALL SDL_GetClipboardMimeTypes(size_t *num_mime_types);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_clipboard_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_close_code.h

@@ -0,0 +1,41 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/*
+ * This file reverses the effects of SDL_begin_code.h and should be included
+ * after you finish any function and structure declarations in your headers.
+ *
+ * SDL's headers use this; applications generally should not include this
+ * header directly.
+ */
+
+#ifndef SDL_begin_code_h
+#error SDL_close_code.h included without matching SDL_begin_code.h
+#endif
+#undef SDL_begin_code_h
+
+/* Reset structure packing at previous byte alignment */
+#if defined(_MSC_VER) || defined(__MWERKS__) || defined(__BORLANDC__)
+#ifdef __BORLANDC__
+#pragma nopackwarning
+#endif
+#pragma pack(pop)
+#endif /* Compiler needs structure packing set */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_copying.h

@@ -0,0 +1,22 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* Header file containing SDL's license. */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_cpuinfo.h

@@ -0,0 +1,374 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: CPUInfo */
+
+/**
+ * # CategoryCPUInfo
+ *
+ * CPU feature detection for SDL.
+ *
+ * These functions are largely concerned with reporting if the system has
+ * access to various SIMD instruction sets, but also has other important info
+ * to share, such as system RAM size and number of logical CPU cores.
+ *
+ * CPU instruction set checks, like SDL_HasSSE() and SDL_HasNEON(), are
+ * available on all platforms, even if they don't make sense (an ARM processor
+ * will never have SSE and an x86 processor will never have NEON, for example,
+ * but these functions still exist and will simply return false in these
+ * cases).
+ */
+
+#ifndef SDL_cpuinfo_h_
+#define SDL_cpuinfo_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * A guess for the cacheline size used for padding.
+ *
+ * Most x86 processors have a 64 byte cache line. The 64-bit PowerPC
+ * processors have a 128 byte cache line. We use the larger value to be
+ * generally safe.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_CACHELINE_SIZE  128
+
+/**
+ * Get the number of logical CPU cores available.
+ *
+ * \returns the total number of logical CPU cores. On CPUs that include
+ *          technologies such as hyperthreading, the number of logical cores
+ *          may be more than the number of physical cores.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_GetNumLogicalCPUCores(void);
+
+/**
+ * Determine the L1 cache line size of the CPU.
+ *
+ * This is useful for determining multi-threaded structure padding or SIMD
+ * prefetch sizes.
+ *
+ * \returns the L1 cache line size of the CPU, in bytes.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_GetCPUCacheLineSize(void);
+
+/**
+ * Determine whether the CPU has AltiVec features.
+ *
+ * This always returns false on CPUs that aren't using PowerPC instruction
+ * sets.
+ *
+ * \returns true if the CPU has AltiVec features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasAltiVec(void);
+
+/**
+ * Determine whether the CPU has MMX features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has MMX features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasMMX(void);
+
+/**
+ * Determine whether the CPU has SSE features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has SSE features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasSSE2
+ * \sa SDL_HasSSE3
+ * \sa SDL_HasSSE41
+ * \sa SDL_HasSSE42
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasSSE(void);
+
+/**
+ * Determine whether the CPU has SSE2 features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has SSE2 features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasSSE
+ * \sa SDL_HasSSE3
+ * \sa SDL_HasSSE41
+ * \sa SDL_HasSSE42
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasSSE2(void);
+
+/**
+ * Determine whether the CPU has SSE3 features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has SSE3 features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasSSE
+ * \sa SDL_HasSSE2
+ * \sa SDL_HasSSE41
+ * \sa SDL_HasSSE42
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasSSE3(void);
+
+/**
+ * Determine whether the CPU has SSE4.1 features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has SSE4.1 features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasSSE
+ * \sa SDL_HasSSE2
+ * \sa SDL_HasSSE3
+ * \sa SDL_HasSSE42
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasSSE41(void);
+
+/**
+ * Determine whether the CPU has SSE4.2 features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has SSE4.2 features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasSSE
+ * \sa SDL_HasSSE2
+ * \sa SDL_HasSSE3
+ * \sa SDL_HasSSE41
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasSSE42(void);
+
+/**
+ * Determine whether the CPU has AVX features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has AVX features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasAVX2
+ * \sa SDL_HasAVX512F
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasAVX(void);
+
+/**
+ * Determine whether the CPU has AVX2 features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has AVX2 features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasAVX
+ * \sa SDL_HasAVX512F
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasAVX2(void);
+
+/**
+ * Determine whether the CPU has AVX-512F (foundation) features.
+ *
+ * This always returns false on CPUs that aren't using Intel instruction sets.
+ *
+ * \returns true if the CPU has AVX-512F features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasAVX
+ * \sa SDL_HasAVX2
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasAVX512F(void);
+
+/**
+ * Determine whether the CPU has ARM SIMD (ARMv6) features.
+ *
+ * This is different from ARM NEON, which is a different instruction set.
+ *
+ * This always returns false on CPUs that aren't using ARM instruction sets.
+ *
+ * \returns true if the CPU has ARM SIMD features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasNEON
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasARMSIMD(void);
+
+/**
+ * Determine whether the CPU has NEON (ARM SIMD) features.
+ *
+ * This always returns false on CPUs that aren't using ARM instruction sets.
+ *
+ * \returns true if the CPU has ARM NEON features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasNEON(void);
+
+/**
+ * Determine whether the CPU has LSX (LOONGARCH SIMD) features.
+ *
+ * This always returns false on CPUs that aren't using LOONGARCH instruction
+ * sets.
+ *
+ * \returns true if the CPU has LOONGARCH LSX features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasLSX(void);
+
+/**
+ * Determine whether the CPU has LASX (LOONGARCH SIMD) features.
+ *
+ * This always returns false on CPUs that aren't using LOONGARCH instruction
+ * sets.
+ *
+ * \returns true if the CPU has LOONGARCH LASX features or false if not.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasLASX(void);
+
+/**
+ * Get the amount of RAM configured in the system.
+ *
+ * \returns the amount of RAM configured in the system in MiB.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_GetSystemRAM(void);
+
+/**
+ * Report the alignment this system needs for SIMD allocations.
+ *
+ * This will return the minimum number of bytes to which a pointer must be
+ * aligned to be compatible with SIMD instructions on the current machine. For
+ * example, if the machine supports SSE only, it will return 16, but if it
+ * supports AVX-512F, it'll return 64 (etc). This only reports values for
+ * instruction sets SDL knows about, so if your SDL build doesn't have
+ * SDL_HasAVX512F(), then it might return 16 for the SSE support it sees and
+ * not 64 for the AVX-512 instructions that exist but SDL doesn't know about.
+ * Plan accordingly.
+ *
+ * \returns the alignment in bytes needed for available, known SIMD
+ *          instructions.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_aligned_alloc
+ * \sa SDL_aligned_free
+ */
+extern SDL_DECLSPEC size_t SDLCALL SDL_GetSIMDAlignment(void);
+
+/**
+ * Report the size of a page of memory.
+ *
+ * Different platforms might have different memory page sizes. In current
+ * times, 4 kilobytes is not unusual, but newer systems are moving to larger
+ * page sizes, and esoteric platforms might have any unexpected size.
+ *
+ * Note that this function can return 0, which means SDL can't determine the
+ * page size on this platform. It will _not_ set an error string to be
+ * retrieved with SDL_GetError() in this case! In this case, defaulting to
+ * 4096 is often a reasonable option.
+ *
+ * \returns the size of a single page of memory, in bytes, or 0 if SDL can't
+ *          determine this information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.4.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_GetSystemPageSize(void);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_cpuinfo_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_dialog.h

@@ -0,0 +1,343 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryDialog
+ *
+ * File dialog support.
+ *
+ * SDL offers file dialogs, to let users select files with native GUI
+ * interfaces. There are "open" dialogs, "save" dialogs, and folder selection
+ * dialogs. The app can control some details, such as filtering to specific
+ * files, or whether multiple files can be selected by the user.
+ *
+ * Note that launching a file dialog is a non-blocking operation; control
+ * returns to the app immediately, and a callback is called later (possibly in
+ * another thread) when the user makes a choice.
+ */
+
+#ifndef SDL_dialog_h_
+#define SDL_dialog_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_properties.h>
+#include <SDL3/SDL_video.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * An entry for filters for file dialogs.
+ *
+ * `name` is a user-readable label for the filter (for example, "Office
+ * document").
+ *
+ * `pattern` is a semicolon-separated list of file extensions (for example,
+ * "doc;docx"). File extensions may only contain alphanumeric characters,
+ * hyphens, underscores and periods. Alternatively, the whole string can be a
+ * single asterisk ("*"), which serves as an "All files" filter.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ *
+ * \sa SDL_DialogFileCallback
+ * \sa SDL_ShowOpenFileDialog
+ * \sa SDL_ShowSaveFileDialog
+ * \sa SDL_ShowOpenFolderDialog
+ * \sa SDL_ShowFileDialogWithProperties
+ */
+typedef struct SDL_DialogFileFilter
+{
+    const char *name;
+    const char *pattern;
+} SDL_DialogFileFilter;
+
+/**
+ * Callback used by file dialog functions.
+ *
+ * The specific usage is described in each function.
+ *
+ * If `filelist` is:
+ *
+ * - NULL, an error occurred. Details can be obtained with SDL_GetError().
+ * - A pointer to NULL, the user either didn't choose any file or canceled the
+ *   dialog.
+ * - A pointer to non-`NULL`, the user chose one or more files. The argument
+ *   is a null-terminated array of pointers to UTF-8 encoded strings, each
+ *   containing a path.
+ *
+ * The filelist argument should not be freed; it will automatically be freed
+ * when the callback returns.
+ *
+ * The filter argument is the index of the filter that was selected, or -1 if
+ * no filter was selected or if the platform or method doesn't support
+ * fetching the selected filter.
+ *
+ * In Android, the `filelist` are `content://` URIs. They should be opened
+ * using SDL_IOFromFile() with appropriate modes. This applies both to open
+ * and save file dialog.
+ *
+ * \param userdata an app-provided pointer, for the callback's use.
+ * \param filelist the file(s) chosen by the user.
+ * \param filter index of the selected filter.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_DialogFileFilter
+ * \sa SDL_ShowOpenFileDialog
+ * \sa SDL_ShowSaveFileDialog
+ * \sa SDL_ShowOpenFolderDialog
+ * \sa SDL_ShowFileDialogWithProperties
+ */
+typedef void (SDLCALL *SDL_DialogFileCallback)(void *userdata, const char * const *filelist, int filter);
+
+/**
+ * Displays a dialog that lets the user select a file on their filesystem.
+ *
+ * This is an asynchronous function; it will return immediately, and the
+ * result will be passed to the callback.
+ *
+ * The callback will be invoked with a null-terminated list of files the user
+ * chose. The list will be empty if the user canceled the dialog, and it will
+ * be NULL if an error occurred.
+ *
+ * Note that the callback may be called from a different thread than the one
+ * the function was invoked on.
+ *
+ * Depending on the platform, the user may be allowed to input paths that
+ * don't yet exist.
+ *
+ * On Linux, dialogs may require XDG Portals, which requires DBus, which
+ * requires an event-handling loop. Apps that do not use SDL to handle events
+ * should add a call to SDL_PumpEvents in their main loop.
+ *
+ * \param callback a function pointer to be invoked when the user selects a
+ *                 file and accepts, or cancels the dialog, or an error
+ *                 occurs.
+ * \param userdata an optional pointer to pass extra data to the callback when
+ *                 it will be invoked.
+ * \param window the window that the dialog should be modal for, may be NULL.
+ *               Not all platforms support this option.
+ * \param filters a list of filters, may be NULL. See the
+ *                [`SDL_DialogFileFilter` documentation for
+ *                examples](SDL_DialogFileFilter#code-examples). Not all
+ *                platforms support this option, and platforms that do support
+ *                it may allow the user to ignore the filters. If non-NULL, it
+ *                must remain valid at least until the callback is invoked.
+ * \param nfilters the number of filters. Ignored if filters is NULL.
+ * \param default_location the default folder or file to start the dialog at,
+ *                         may be NULL. Not all platforms support this option.
+ * \param allow_many if non-zero, the user will be allowed to select multiple
+ *                   entries. Not all platforms support this option.
+ *
+ * \threadsafety This function should be called only from the main thread. The
+ *               callback may be invoked from the same thread or from a
+ *               different one, depending on the OS's constraints.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_DialogFileCallback
+ * \sa SDL_DialogFileFilter
+ * \sa SDL_ShowSaveFileDialog
+ * \sa SDL_ShowOpenFolderDialog
+ * \sa SDL_ShowFileDialogWithProperties
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ShowOpenFileDialog(SDL_DialogFileCallback callback, void *userdata, SDL_Window *window, const SDL_DialogFileFilter *filters, int nfilters, const char *default_location, bool allow_many);
+
+/**
+ * Displays a dialog that lets the user choose a new or existing file on their
+ * filesystem.
+ *
+ * This is an asynchronous function; it will return immediately, and the
+ * result will be passed to the callback.
+ *
+ * The callback will be invoked with a null-terminated list of files the user
+ * chose. The list will be empty if the user canceled the dialog, and it will
+ * be NULL if an error occurred.
+ *
+ * Note that the callback may be called from a different thread than the one
+ * the function was invoked on.
+ *
+ * The chosen file may or may not already exist.
+ *
+ * On Linux, dialogs may require XDG Portals, which requires DBus, which
+ * requires an event-handling loop. Apps that do not use SDL to handle events
+ * should add a call to SDL_PumpEvents in their main loop.
+ *
+ * \param callback a function pointer to be invoked when the user selects a
+ *                 file and accepts, or cancels the dialog, or an error
+ *                 occurs.
+ * \param userdata an optional pointer to pass extra data to the callback when
+ *                 it will be invoked.
+ * \param window the window that the dialog should be modal for, may be NULL.
+ *               Not all platforms support this option.
+ * \param filters a list of filters, may be NULL. Not all platforms support
+ *                this option, and platforms that do support it may allow the
+ *                user to ignore the filters. If non-NULL, it must remain
+ *                valid at least until the callback is invoked.
+ * \param nfilters the number of filters. Ignored if filters is NULL.
+ * \param default_location the default folder or file to start the dialog at,
+ *                         may be NULL. Not all platforms support this option.
+ *
+ * \threadsafety This function should be called only from the main thread. The
+ *               callback may be invoked from the same thread or from a
+ *               different one, depending on the OS's constraints.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_DialogFileCallback
+ * \sa SDL_DialogFileFilter
+ * \sa SDL_ShowOpenFileDialog
+ * \sa SDL_ShowOpenFolderDialog
+ * \sa SDL_ShowFileDialogWithProperties
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ShowSaveFileDialog(SDL_DialogFileCallback callback, void *userdata, SDL_Window *window, const SDL_DialogFileFilter *filters, int nfilters, const char *default_location);
+
+/**
+ * Displays a dialog that lets the user select a folder on their filesystem.
+ *
+ * This is an asynchronous function; it will return immediately, and the
+ * result will be passed to the callback.
+ *
+ * The callback will be invoked with a null-terminated list of files the user
+ * chose. The list will be empty if the user canceled the dialog, and it will
+ * be NULL if an error occurred.
+ *
+ * Note that the callback may be called from a different thread than the one
+ * the function was invoked on.
+ *
+ * Depending on the platform, the user may be allowed to input paths that
+ * don't yet exist.
+ *
+ * On Linux, dialogs may require XDG Portals, which requires DBus, which
+ * requires an event-handling loop. Apps that do not use SDL to handle events
+ * should add a call to SDL_PumpEvents in their main loop.
+ *
+ * \param callback a function pointer to be invoked when the user selects a
+ *                 file and accepts, or cancels the dialog, or an error
+ *                 occurs.
+ * \param userdata an optional pointer to pass extra data to the callback when
+ *                 it will be invoked.
+ * \param window the window that the dialog should be modal for, may be NULL.
+ *               Not all platforms support this option.
+ * \param default_location the default folder or file to start the dialog at,
+ *                         may be NULL. Not all platforms support this option.
+ * \param allow_many if non-zero, the user will be allowed to select multiple
+ *                   entries. Not all platforms support this option.
+ *
+ * \threadsafety This function should be called only from the main thread. The
+ *               callback may be invoked from the same thread or from a
+ *               different one, depending on the OS's constraints.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_DialogFileCallback
+ * \sa SDL_ShowOpenFileDialog
+ * \sa SDL_ShowSaveFileDialog
+ * \sa SDL_ShowFileDialogWithProperties
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ShowOpenFolderDialog(SDL_DialogFileCallback callback, void *userdata, SDL_Window *window, const char *default_location, bool allow_many);
+
+/**
+ * Various types of file dialogs.
+ *
+ * This is used by SDL_ShowFileDialogWithProperties() to decide what kind of
+ * dialog to present to the user.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ *
+ * \sa SDL_ShowFileDialogWithProperties
+ */
+typedef enum SDL_FileDialogType
+{
+    SDL_FILEDIALOG_OPENFILE,
+    SDL_FILEDIALOG_SAVEFILE,
+    SDL_FILEDIALOG_OPENFOLDER
+} SDL_FileDialogType;
+
+/**
+ * Create and launch a file dialog with the specified properties.
+ *
+ * These are the supported properties:
+ *
+ * - `SDL_PROP_FILE_DIALOG_FILTERS_POINTER`: a pointer to a list of
+ *   SDL_DialogFileFilter structs, which will be used as filters for
+ *   file-based selections. Ignored if the dialog is an "Open Folder" dialog.
+ *   If non-NULL, the array of filters must remain valid at least until the
+ *   callback is invoked.
+ * - `SDL_PROP_FILE_DIALOG_NFILTERS_NUMBER`: the number of filters in the
+ *   array of filters, if it exists.
+ * - `SDL_PROP_FILE_DIALOG_WINDOW_POINTER`: the window that the dialog should
+ *   be modal for.
+ * - `SDL_PROP_FILE_DIALOG_LOCATION_STRING`: the default folder or file to
+ *   start the dialog at.
+ * - `SDL_PROP_FILE_DIALOG_MANY_BOOLEAN`: true to allow the user to select
+ *   more than one entry.
+ * - `SDL_PROP_FILE_DIALOG_TITLE_STRING`: the title for the dialog.
+ * - `SDL_PROP_FILE_DIALOG_ACCEPT_STRING`: the label that the accept button
+ *   should have.
+ * - `SDL_PROP_FILE_DIALOG_CANCEL_STRING`: the label that the cancel button
+ *   should have.
+ *
+ * Note that each platform may or may not support any of the properties.
+ *
+ * \param type the type of file dialog.
+ * \param callback a function pointer to be invoked when the user selects a
+ *                 file and accepts, or cancels the dialog, or an error
+ *                 occurs.
+ * \param userdata an optional pointer to pass extra data to the callback when
+ *                 it will be invoked.
+ * \param props the properties to use.
+ *
+ * \threadsafety This function should be called only from the main thread. The
+ *               callback may be invoked from the same thread or from a
+ *               different one, depending on the OS's constraints.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_FileDialogType
+ * \sa SDL_DialogFileCallback
+ * \sa SDL_DialogFileFilter
+ * \sa SDL_ShowOpenFileDialog
+ * \sa SDL_ShowSaveFileDialog
+ * \sa SDL_ShowOpenFolderDialog
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ShowFileDialogWithProperties(SDL_FileDialogType type, SDL_DialogFileCallback callback, void *userdata, SDL_PropertiesID props);
+
+#define SDL_PROP_FILE_DIALOG_FILTERS_POINTER     "SDL.filedialog.filters"
+#define SDL_PROP_FILE_DIALOG_NFILTERS_NUMBER     "SDL.filedialog.nfilters"
+#define SDL_PROP_FILE_DIALOG_WINDOW_POINTER      "SDL.filedialog.window"
+#define SDL_PROP_FILE_DIALOG_LOCATION_STRING     "SDL.filedialog.location"
+#define SDL_PROP_FILE_DIALOG_MANY_BOOLEAN        "SDL.filedialog.many"
+#define SDL_PROP_FILE_DIALOG_TITLE_STRING        "SDL.filedialog.title"
+#define SDL_PROP_FILE_DIALOG_ACCEPT_STRING       "SDL.filedialog.accept"
+#define SDL_PROP_FILE_DIALOG_CANCEL_STRING       "SDL.filedialog.cancel"
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_dialog_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_dlopennote.h

@@ -0,0 +1,227 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: DlopenNotes */
+
+/**
+ * # CategoryDlopenNotes
+ *
+ * This header allows you to annotate your code so external tools know about
+ * dynamic shared library dependencies.
+ *
+ * If you determine that your toolchain doesn't support dlopen notes, you can
+ * disable this feature by defining `SDL_DISABLE_DLOPEN_NOTES`. You can use
+ * this CMake snippet to check for support:
+ *
+ * ```cmake
+ *  set(CHECK_ELF_DLNOTES_SRC [==[
+ *  #ifndef __ELF__
+ *    ELF DL notes is only supported on ELF platforms
+ *  #endif
+ *  __attribute__ ((used,aligned(4),section(".note.dlopen"))) static const struct {
+ *    struct { int a; int b; int c; } hdr; char name[4]; __attribute__((aligned(4))) char json[24];
+ *  } dlnote = { { 4, 0x407c0c0aU, 16 }, "FDO", "[\\"a\\":{\\"a\\":\\"1\\",\\"b\\":\\"2\\"}]" };
+ *  int main(int argc, char *argv[]) {
+ *    return argc + dlnote.hdr.a;
+ *  }
+ *  ]==])
+ *  check_c_source_compiles("${CHECK_ELF_DLNOTES_SRC}" COMPILER_SUPPORTS_ELFNOTES)
+ *  if(NOT COMPILER_SUPPORTS_ELFNOTES)
+ *    set(SDL_DISABLE_DLOPEN_NOTES TRUE)
+ *  endif()
+ * ```
+ */
+
+#ifndef SDL_dlopennote_h
+#define SDL_dlopennote_h
+
+/**
+ * Use this macro with SDL_ELF_NOTE_DLOPEN() to note that a dynamic shared
+ * library dependency is optional.
+ *
+ * Optional functionality uses the dependency, the binary will work and the
+ * dependency is only needed for full-featured installations.
+ *
+ * \since This macro is available since SDL 3.4.0.
+ *
+ * \sa SDL_ELF_NOTE_DLOPEN
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_RECOMMENDED
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_REQUIRED
+ */
+#define SDL_ELF_NOTE_DLOPEN_PRIORITY_SUGGESTED   "suggested"
+
+/**
+ * Use this macro with SDL_ELF_NOTE_DLOPEN() to note that a dynamic shared
+ * library dependency is recommended.
+ *
+ * Important functionality needs the dependency, the binary will work but in
+ * most cases the dependency should be provided.
+ *
+ * \since This macro is available since SDL 3.4.0.
+ *
+ * \sa SDL_ELF_NOTE_DLOPEN
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_SUGGESTED
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_REQUIRED
+ */
+#define SDL_ELF_NOTE_DLOPEN_PRIORITY_RECOMMENDED "recommended"
+
+/**
+ * Use this macro with SDL_ELF_NOTE_DLOPEN() to note that a dynamic shared
+ * library dependency is required.
+ *
+ * Core functionality needs the dependency, the binary will not work if it
+ * cannot be found.
+ *
+ * \since This macro is available since SDL 3.4.0.
+ *
+ * \sa SDL_ELF_NOTE_DLOPEN
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_SUGGESTED
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_RECOMMENDED
+ */
+#define SDL_ELF_NOTE_DLOPEN_PRIORITY_REQUIRED    "required"
+
+
+#if !defined(SDL_PLATFORM_UNIX) || defined(SDL_PLATFORM_ANDROID)
+/* The dlopen note functionality isn't used on this platform */
+#ifndef SDL_DISABLE_DLOPEN_NOTES
+#define SDL_DISABLE_DLOPEN_NOTES
+#endif
+#elif defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 1))
+/* gcc < 3.1 too old */
+#ifndef SDL_DISABLE_DLOPEN_NOTES
+#define SDL_DISABLE_DLOPEN_NOTES
+#endif
+#endif /* SDL_PLATFORM_UNIX || SDL_PLATFORM_ANDROID */
+
+#if defined(__ELF__) && !defined(SDL_DISABLE_DLOPEN_NOTES)
+
+#include <SDL3/SDL_stdinc.h>
+
+#define SDL_ELF_NOTE_DLOPEN_VENDOR "FDO"
+#define SDL_ELF_NOTE_DLOPEN_TYPE 0x407c0c0aU
+
+#define SDL_ELF_NOTE_INTERNAL2(json, variable_name)                 \
+    __attribute__((aligned(4), used, section(".note.dlopen")))      \
+    static const struct {                                           \
+        struct {                                                    \
+            Uint32 n_namesz;                                        \
+            Uint32 n_descsz;                                        \
+            Uint32 n_type;                                          \
+        } nhdr;                                                     \
+        char name[4];                                               \
+        __attribute__((aligned(4))) char dlopen_json[sizeof(json)]; \
+    } variable_name = {                                             \
+        {                                                           \
+             sizeof(SDL_ELF_NOTE_DLOPEN_VENDOR),                    \
+             sizeof(json),                                          \
+             SDL_ELF_NOTE_DLOPEN_TYPE                               \
+        },                                                          \
+        SDL_ELF_NOTE_DLOPEN_VENDOR,                                 \
+        json                                                        \
+    }
+
+#define SDL_ELF_NOTE_INTERNAL(json, variable_name) \
+    SDL_ELF_NOTE_INTERNAL2(json, variable_name)
+
+#define SDL_SONAME_ARRAY1(N1) "[\"" N1 "\"]"
+#define SDL_SONAME_ARRAY2(N1,N2) "[\"" N1 "\",\"" N2 "\"]"
+#define SDL_SONAME_ARRAY3(N1,N2,N3) "[\"" N1 "\",\"" N2 "\",\"" N3 "\"]"
+#define SDL_SONAME_ARRAY4(N1,N2,N3,N4) "[\"" N1 "\",\"" N2 "\",\"" N3 "\",\"" N4 "\"]"
+#define SDL_SONAME_ARRAY5(N1,N2,N3,N4,N5) "[\"" N1 "\",\"" N2 "\",\"" N3 "\",\"" N4 "\",\"" N5 "\"]"
+#define SDL_SONAME_ARRAY6(N1,N2,N3,N4,N5,N6) "[\"" N1 "\",\"" N2 "\",\"" N3 "\",\"" N4 "\",\"" N5 "\",\"" N6 "\"]"
+#define SDL_SONAME_ARRAY7(N1,N2,N3,N4,N5,N6,N7) "[\"" N1 "\",\"" N2 "\",\"" N3 "\",\"" N4 "\",\"" N5 "\",\"" N6 "\",\"" N7 "\"]"
+#define SDL_SONAME_ARRAY8(N1,N2,N3,N4,N5,N6,N7,N8) "[\"" N1 "\",\"" N2 "\",\"" N3 "\",\"" N4 "\",\"" N5 "\",\"" N6 "\",\"" N7 "\",\"" N8 "\"]"
+#define SDL_SONAME_ARRAY_GET(N1,N2,N3,N4,N5,N6,N7,N8,NAME,...) NAME
+#define SDL_SONAME_ARRAY(...) \
+    SDL_SONAME_ARRAY_GET(__VA_ARGS__, \
+         SDL_SONAME_ARRAY8, \
+         SDL_SONAME_ARRAY7, \
+         SDL_SONAME_ARRAY6, \
+         SDL_SONAME_ARRAY5, \
+         SDL_SONAME_ARRAY4, \
+         SDL_SONAME_ARRAY3, \
+         SDL_SONAME_ARRAY2, \
+         SDL_SONAME_ARRAY1 \
+    )(__VA_ARGS__)
+
+/* Create "unique" variable name using __LINE__,
+ * so creating elf notes on the same line is not supported
+ */
+#define SDL_ELF_NOTE_JOIN2(A,B) A##B
+#define SDL_ELF_NOTE_JOIN(A,B) SDL_ELF_NOTE_JOIN2(A,B)
+#define SDL_ELF_NOTE_UNIQUE_NAME SDL_ELF_NOTE_JOIN(s_SDL_dlopen_note_, __LINE__)
+
+/**
+ * Note that your application has dynamic shared library dependencies.
+ *
+ * You can do this by adding the following to the global scope:
+ *
+ * ```c
+ * SDL_ELF_NOTE_DLOPEN(
+ *     "png",
+ *     "Support for loading PNG images using libpng (required for APNG)",
+ *     SDL_ELF_NOTE_DLOPEN_PRIORITY_RECOMMENDED,
+ *     "libpng12.so.0"
+ * );
+ * ```
+ *
+ * Or if you support multiple versions of a library, you can list them:
+ *
+ * ```c
+ * // Our app supports SDL1, SDL2, and SDL3 by dynamically loading them
+ * SDL_ELF_NOTE_DLOPEN(
+ *     "SDL",
+ *     "Create windows through SDL video backend",
+ *     SDL_ELF_NOTE_DLOPEN_PRIORITY_REQUIRED
+ *     "libSDL-1.2.so.0", "libSDL2-2.0.so.0", "libSDL3.so.0"
+ * );
+ * ```
+ *
+ * \since This macro is available since SDL 3.4.0.
+ *
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_SUGGESTED
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_RECOMMENDED
+ * \sa SDL_ELF_NOTE_DLOPEN_PRIORITY_REQUIRED
+ */
+#define SDL_ELF_NOTE_DLOPEN(feature, description, priority, ...) \
+    SDL_ELF_NOTE_INTERNAL(                                       \
+        "[{\"feature\":\"" feature                               \
+        "\",\"description\":\"" description                      \
+        "\",\"priority\":\"" priority                            \
+        "\",\"soname\":" SDL_SONAME_ARRAY(__VA_ARGS__) "}]",     \
+        SDL_ELF_NOTE_UNIQUE_NAME)
+
+#elif defined(__GNUC__) && __GNUC__ < 3
+
+#define SDL_ELF_NOTE_DLOPEN(args...)
+
+#elif defined(_MSC_VER) && _MSC_VER < 1400
+
+/* Variadic macros are not supported */
+#define SDL_ELF_NOTE_DLOPEN
+
+#else
+
+#define SDL_ELF_NOTE_DLOPEN(...)
+
+#endif
+
+#endif /* SDL_dlopennote_h */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_endian.h

@@ -0,0 +1,645 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryEndian
+ *
+ * Functions converting endian-specific values to different byte orders.
+ *
+ * These functions either unconditionally swap byte order (SDL_Swap16,
+ * SDL_Swap32, SDL_Swap64, SDL_SwapFloat), or they swap to/from the system's
+ * native byte order (SDL_Swap16LE, SDL_Swap16BE, SDL_Swap32LE, SDL_Swap32BE,
+ * SDL_Swap32LE, SDL_Swap32BE, SDL_SwapFloatLE, SDL_SwapFloatBE). In the
+ * latter case, the functionality is provided by macros that become no-ops if
+ * a swap isn't necessary: on an x86 (littleendian) processor, SDL_Swap32LE
+ * does nothing, but SDL_Swap32BE reverses the bytes of the data. On a PowerPC
+ * processor (bigendian), the macros behavior is reversed.
+ *
+ * The swap routines are inline functions, and attempt to use compiler
+ * intrinsics, inline assembly, and other magic to make byteswapping
+ * efficient.
+ */
+
+#ifndef SDL_endian_h_
+#define SDL_endian_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#if defined(_MSC_VER) && (_MSC_VER >= 1400)
+/* As of Clang 11, '_m_prefetchw' is conflicting with the winnt.h's version,
+   so we define the needed '_m_prefetch' here as a pseudo-header, until the issue is fixed. */
+#if defined(__clang__) &&  !SDL_HAS_BUILTIN(_m_prefetch)
+#ifndef __PRFCHWINTRIN_H
+#define __PRFCHWINTRIN_H
+static __inline__ void __attribute__((__always_inline__, __nodebug__))
+_m_prefetch(void *__P)
+{
+  __builtin_prefetch(__P, 0, 3 /* _MM_HINT_T0 */);
+}
+#endif /* __PRFCHWINTRIN_H */
+#endif /* __clang__ */
+
+#include <intrin.h>
+#endif
+
+/**
+ *  \name The two types of endianness
+ */
+/* @{ */
+
+
+/**
+ * A value to represent littleendian byteorder.
+ *
+ * This is used with the preprocessor macro SDL_BYTEORDER, to determine a
+ * platform's byte ordering:
+ *
+ * ```c
+ * #if SDL_BYTEORDER == SDL_LIL_ENDIAN
+ * SDL_Log("This system is littleendian.");
+ * #endif
+ * ```
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_BYTEORDER
+ * \sa SDL_BIG_ENDIAN
+ */
+#define SDL_LIL_ENDIAN  1234
+
+/**
+ * A value to represent bigendian byteorder.
+ *
+ * This is used with the preprocessor macro SDL_BYTEORDER, to determine a
+ * platform's byte ordering:
+ *
+ * ```c
+ * #if SDL_BYTEORDER == SDL_BIG_ENDIAN
+ * SDL_Log("This system is bigendian.");
+ * #endif
+ * ```
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_BYTEORDER
+ * \sa SDL_LIL_ENDIAN
+ */
+#define SDL_BIG_ENDIAN  4321
+
+/* @} */
+
+#ifndef SDL_BYTEORDER
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro that reports the target system's byte order.
+ *
+ * This is set to either SDL_LIL_ENDIAN or SDL_BIG_ENDIAN (and maybe other
+ * values in the future, if something else becomes popular). This can be
+ * tested with the preprocessor, so decisions can be made at compile time.
+ *
+ * ```c
+ * #if SDL_BYTEORDER == SDL_BIG_ENDIAN
+ * SDL_Log("This system is bigendian.");
+ * #endif
+ * ```
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_LIL_ENDIAN
+ * \sa SDL_BIG_ENDIAN
+ */
+#define SDL_BYTEORDER   SDL_LIL_ENDIAN___or_maybe___SDL_BIG_ENDIAN
+#elif defined(SDL_PLATFORM_LINUX) || defined(__GLIBC__)
+#include <endian.h>
+#define SDL_BYTEORDER  __BYTE_ORDER
+#elif defined(SDL_PLATFORM_SOLARIS)
+#include <sys/byteorder.h>
+#if defined(_LITTLE_ENDIAN)
+#define SDL_BYTEORDER   SDL_LIL_ENDIAN
+#elif defined(_BIG_ENDIAN)
+#define SDL_BYTEORDER   SDL_BIG_ENDIAN
+#else
+#error Unsupported endianness
+#endif
+#elif defined(SDL_PLATFORM_OPENBSD) || defined(__DragonFly__)
+#include <endian.h>
+#define SDL_BYTEORDER  BYTE_ORDER
+#elif defined(SDL_PLATFORM_FREEBSD) || defined(SDL_PLATFORM_NETBSD)
+#include <sys/endian.h>
+#define SDL_BYTEORDER  BYTE_ORDER
+/* predefs from newer gcc and clang versions: */
+#elif defined(__ORDER_LITTLE_ENDIAN__) && defined(__ORDER_BIG_ENDIAN__) && defined(__BYTE_ORDER__)
+#if (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+#define SDL_BYTEORDER   SDL_LIL_ENDIAN
+#elif (__BYTE_ORDER__ == __ORDER_BIG_ENDIAN__)
+#define SDL_BYTEORDER   SDL_BIG_ENDIAN
+#else
+#error Unsupported endianness
+#endif /**/
+#else
+#if defined(__hppa__) || \
+    defined(__m68k__) || defined(mc68000) || defined(_M_M68K) || \
+    (defined(__MIPS__) && defined(__MIPSEB__)) || \
+    defined(__ppc__) || defined(__POWERPC__) || defined(__powerpc__) || defined(__PPC__) || \
+    defined(__sparc__) || defined(__sparc)
+#define SDL_BYTEORDER   SDL_BIG_ENDIAN
+#else
+#define SDL_BYTEORDER   SDL_LIL_ENDIAN
+#endif
+#endif /* SDL_PLATFORM_LINUX */
+#endif /* !SDL_BYTEORDER */
+
+#ifndef SDL_FLOATWORDORDER
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro that reports the target system's floating point word order.
+ *
+ * This is set to either SDL_LIL_ENDIAN or SDL_BIG_ENDIAN (and maybe other
+ * values in the future, if something else becomes popular). This can be
+ * tested with the preprocessor, so decisions can be made at compile time.
+ *
+ * ```c
+ * #if SDL_FLOATWORDORDER == SDL_BIG_ENDIAN
+ * SDL_Log("This system's floats are bigendian.");
+ * #endif
+ * ```
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_LIL_ENDIAN
+ * \sa SDL_BIG_ENDIAN
+ */
+#define SDL_FLOATWORDORDER   SDL_LIL_ENDIAN___or_maybe___SDL_BIG_ENDIAN
+/* predefs from newer gcc versions: */
+#elif defined(__ORDER_LITTLE_ENDIAN__) && defined(__ORDER_BIG_ENDIAN__) && defined(__FLOAT_WORD_ORDER__)
+#if (__FLOAT_WORD_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+#define SDL_FLOATWORDORDER   SDL_LIL_ENDIAN
+#elif (__FLOAT_WORD_ORDER__ == __ORDER_BIG_ENDIAN__)
+#define SDL_FLOATWORDORDER   SDL_BIG_ENDIAN
+#else
+#error Unsupported endianness
+#endif /**/
+#elif defined(__MAVERICK__)
+/* For Maverick, float words are always little-endian. */
+#define SDL_FLOATWORDORDER   SDL_LIL_ENDIAN
+#elif (defined(__arm__) || defined(__thumb__)) && !defined(__VFP_FP__) && !defined(__ARM_EABI__)
+/* For FPA, float words are always big-endian. */
+#define SDL_FLOATWORDORDER   SDL_BIG_ENDIAN
+#else
+/* By default, assume that floats words follow the memory system mode. */
+#define SDL_FLOATWORDORDER   SDL_BYTEORDER
+#endif /* __FLOAT_WORD_ORDER__ */
+#endif /* !SDL_FLOATWORDORDER */
+
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* various modern compilers may have builtin swap */
+#if defined(__GNUC__) || defined(__clang__)
+#   define HAS_BUILTIN_BSWAP16 (SDL_HAS_BUILTIN(__builtin_bswap16)) || \
+        (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8))
+#   define HAS_BUILTIN_BSWAP32 (SDL_HAS_BUILTIN(__builtin_bswap32)) || \
+        (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))
+#   define HAS_BUILTIN_BSWAP64 (SDL_HAS_BUILTIN(__builtin_bswap64)) || \
+        (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))
+
+    /* this one is broken */
+#   define HAS_BROKEN_BSWAP (__GNUC__ == 2 && __GNUC_MINOR__ <= 95)
+#else
+#   define HAS_BUILTIN_BSWAP16 0
+#   define HAS_BUILTIN_BSWAP32 0
+#   define HAS_BUILTIN_BSWAP64 0
+#   define HAS_BROKEN_BSWAP 0
+#endif
+
+/* Byte swap 16-bit integer. */
+#ifndef SDL_WIKI_DOCUMENTATION_SECTION
+#if HAS_BUILTIN_BSWAP16
+#define SDL_Swap16(x) __builtin_bswap16(x)
+#elif (defined(_MSC_VER) && (_MSC_VER >= 1400)) && !defined(__ICL)
+#pragma intrinsic(_byteswap_ushort)
+#define SDL_Swap16(x) _byteswap_ushort(x)
+#elif defined(__i386__) && !HAS_BROKEN_BSWAP
+SDL_FORCE_INLINE Uint16 SDL_Swap16(Uint16 x)
+{
+  __asm__("xchgb %b0,%h0": "=q"(x):"0"(x));
+    return x;
+}
+#elif defined(__x86_64__)
+SDL_FORCE_INLINE Uint16 SDL_Swap16(Uint16 x)
+{
+  __asm__("xchgb %b0,%h0": "=Q"(x):"0"(x));
+    return x;
+}
+#elif (defined(__powerpc__) || defined(__ppc__))
+SDL_FORCE_INLINE Uint16 SDL_Swap16(Uint16 x)
+{
+    int result;
+
+  __asm__("rlwimi %0,%2,8,16,23": "=&r"(result):"0"(x >> 8), "r"(x));
+    return (Uint16)result;
+}
+#elif (defined(__m68k__) && !defined(__mcoldfire__))
+SDL_FORCE_INLINE Uint16 SDL_Swap16(Uint16 x)
+{
+  __asm__("rorw #8,%0": "=d"(x): "0"(x):"cc");
+    return x;
+}
+#elif defined(__WATCOMC__) && defined(__386__)
+extern __inline Uint16 SDL_Swap16(Uint16);
+#pragma aux SDL_Swap16 = \
+  "xchg al, ah" \
+  parm   [ax]   \
+  modify [ax];
+#else
+SDL_FORCE_INLINE Uint16 SDL_Swap16(Uint16 x)
+{
+    return SDL_static_cast(Uint16, ((x << 8) | (x >> 8)));
+}
+#endif
+#endif
+
+/* Byte swap 32-bit integer. */
+#ifndef SDL_WIKI_DOCUMENTATION_SECTION
+#if HAS_BUILTIN_BSWAP32
+#define SDL_Swap32(x) __builtin_bswap32(x)
+#elif (defined(_MSC_VER) && (_MSC_VER >= 1400)) && !defined(__ICL)
+#pragma intrinsic(_byteswap_ulong)
+#define SDL_Swap32(x) _byteswap_ulong(x)
+#elif defined(__i386__) && !HAS_BROKEN_BSWAP
+SDL_FORCE_INLINE Uint32 SDL_Swap32(Uint32 x)
+{
+  __asm__("bswap %0": "=r"(x):"0"(x));
+    return x;
+}
+#elif defined(__x86_64__)
+SDL_FORCE_INLINE Uint32 SDL_Swap32(Uint32 x)
+{
+  __asm__("bswapl %0": "=r"(x):"0"(x));
+    return x;
+}
+#elif (defined(__powerpc__) || defined(__ppc__))
+SDL_FORCE_INLINE Uint32 SDL_Swap32(Uint32 x)
+{
+    Uint32 result;
+
+  __asm__("rlwimi %0,%2,24,16,23": "=&r"(result): "0" (x>>24),  "r"(x));
+  __asm__("rlwimi %0,%2,8,8,15"  : "=&r"(result): "0" (result), "r"(x));
+  __asm__("rlwimi %0,%2,24,0,7"  : "=&r"(result): "0" (result), "r"(x));
+    return result;
+}
+#elif (defined(__m68k__) && !defined(__mcoldfire__))
+SDL_FORCE_INLINE Uint32 SDL_Swap32(Uint32 x)
+{
+  __asm__("rorw #8,%0\n\tswap %0\n\trorw #8,%0": "=d"(x): "0"(x):"cc");
+    return x;
+}
+#elif defined(__WATCOMC__) && defined(__386__)
+extern __inline Uint32 SDL_Swap32(Uint32);
+#pragma aux SDL_Swap32 = \
+  "bswap eax"  \
+  parm   [eax] \
+  modify [eax];
+#else
+SDL_FORCE_INLINE Uint32 SDL_Swap32(Uint32 x)
+{
+    return SDL_static_cast(Uint32, ((x << 24) | ((x << 8) & 0x00FF0000) |
+                                    ((x >> 8) & 0x0000FF00) | (x >> 24)));
+}
+#endif
+#endif
+
+/* Byte swap 64-bit integer. */
+#ifndef SDL_WIKI_DOCUMENTATION_SECTION
+#if HAS_BUILTIN_BSWAP64
+#define SDL_Swap64(x) __builtin_bswap64(x)
+#elif (defined(_MSC_VER) && (_MSC_VER >= 1400)) && !defined(__ICL)
+#pragma intrinsic(_byteswap_uint64)
+#define SDL_Swap64(x) _byteswap_uint64(x)
+#elif defined(__i386__) && !HAS_BROKEN_BSWAP
+SDL_FORCE_INLINE Uint64 SDL_Swap64(Uint64 x)
+{
+    union {
+        struct {
+            Uint32 a, b;
+        } s;
+        Uint64 u;
+    } v;
+    v.u = x;
+  __asm__("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
+          : "=r"(v.s.a), "=r"(v.s.b)
+          : "0" (v.s.a),  "1"(v.s.b));
+    return v.u;
+}
+#elif defined(__x86_64__)
+SDL_FORCE_INLINE Uint64 SDL_Swap64(Uint64 x)
+{
+  __asm__("bswapq %0": "=r"(x):"0"(x));
+    return x;
+}
+#elif defined(__WATCOMC__) && defined(__386__)
+extern __inline Uint64 SDL_Swap64(Uint64);
+#pragma aux SDL_Swap64 = \
+  "bswap eax"     \
+  "bswap edx"     \
+  "xchg eax,edx"  \
+  parm [eax edx]  \
+  modify [eax edx];
+#else
+SDL_FORCE_INLINE Uint64 SDL_Swap64(Uint64 x)
+{
+    Uint32 hi, lo;
+
+    /* Separate into high and low 32-bit values and swap them */
+    lo = SDL_static_cast(Uint32, x & 0xFFFFFFFF);
+    x >>= 32;
+    hi = SDL_static_cast(Uint32, x & 0xFFFFFFFF);
+    x = SDL_Swap32(lo);
+    x <<= 32;
+    x |= SDL_Swap32(hi);
+    return (x);
+}
+#endif
+#endif
+
+/**
+ * Byte-swap a floating point number.
+ *
+ * This will always byte-swap the value, whether it's currently in the native
+ * byteorder of the system or not. You should use SDL_SwapFloatLE or
+ * SDL_SwapFloatBE instead, in most cases.
+ *
+ * Note that this is a forced-inline function in a header, and not a public
+ * API function available in the SDL library (which is to say, the code is
+ * embedded in the calling program and the linker and dynamic loader will not
+ * be able to find this function inside SDL itself).
+ *
+ * \param x the value to byte-swap.
+ * \returns x, with its bytes in the opposite endian order.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+SDL_FORCE_INLINE float SDL_SwapFloat(float x)
+{
+    union {
+        float f;
+        Uint32 ui32;
+    } swapper;
+    swapper.f = x;
+    swapper.ui32 = SDL_Swap32(swapper.ui32);
+    return swapper.f;
+}
+
+/* remove extra macros */
+#undef HAS_BROKEN_BSWAP
+#undef HAS_BUILTIN_BSWAP16
+#undef HAS_BUILTIN_BSWAP32
+#undef HAS_BUILTIN_BSWAP64
+
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * Byte-swap an unsigned 16-bit number.
+ *
+ * This will always byte-swap the value, whether it's currently in the native
+ * byteorder of the system or not. You should use SDL_Swap16LE or SDL_Swap16BE
+ * instead, in most cases.
+ *
+ * Note that this is a forced-inline function in a header, and not a public
+ * API function available in the SDL library (which is to say, the code is
+ * embedded in the calling program and the linker and dynamic loader will not
+ * be able to find this function inside SDL itself).
+ *
+ * \param x the value to byte-swap.
+ * \returns `x`, with its bytes in the opposite endian order.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+SDL_FORCE_INLINE Uint16 SDL_Swap16(Uint16 x) { return x_but_byteswapped; }
+
+/**
+ * Byte-swap an unsigned 32-bit number.
+ *
+ * This will always byte-swap the value, whether it's currently in the native
+ * byteorder of the system or not. You should use SDL_Swap32LE or SDL_Swap32BE
+ * instead, in most cases.
+ *
+ * Note that this is a forced-inline function in a header, and not a public
+ * API function available in the SDL library (which is to say, the code is
+ * embedded in the calling program and the linker and dynamic loader will not
+ * be able to find this function inside SDL itself).
+ *
+ * \param x the value to byte-swap.
+ * \returns `x`, with its bytes in the opposite endian order.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+SDL_FORCE_INLINE Uint32 SDL_Swap32(Uint32 x) { return x_but_byteswapped; }
+
+/**
+ * Byte-swap an unsigned 64-bit number.
+ *
+ * This will always byte-swap the value, whether it's currently in the native
+ * byteorder of the system or not. You should use SDL_Swap64LE or SDL_Swap64BE
+ * instead, in most cases.
+ *
+ * Note that this is a forced-inline function in a header, and not a public
+ * API function available in the SDL library (which is to say, the code is
+ * embedded in the calling program and the linker and dynamic loader will not
+ * be able to find this function inside SDL itself).
+ *
+ * \param x the value to byte-swap.
+ * \returns `x`, with its bytes in the opposite endian order.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+SDL_FORCE_INLINE Uint64 SDL_Swap64(Uint64 x) { return x_but_byteswapped; }
+
+/**
+ * Swap a 16-bit value from littleendian to native byte order.
+ *
+ * If this is running on a littleendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in littleendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_Swap16LE(x) SwapOnlyIfNecessary(x)
+
+/**
+ * Swap a 32-bit value from littleendian to native byte order.
+ *
+ * If this is running on a littleendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in littleendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_Swap32LE(x) SwapOnlyIfNecessary(x)
+
+/**
+ * Swap a 64-bit value from littleendian to native byte order.
+ *
+ * If this is running on a littleendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in littleendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_Swap64LE(x) SwapOnlyIfNecessary(x)
+
+/**
+ * Swap a floating point value from littleendian to native byte order.
+ *
+ * If this is running on a littleendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in littleendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_SwapFloatLE(x) SwapOnlyIfNecessary(x)
+
+/**
+ * Swap a 16-bit value from bigendian to native byte order.
+ *
+ * If this is running on a bigendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in bigendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_Swap16BE(x) SwapOnlyIfNecessary(x)
+
+/**
+ * Swap a 32-bit value from bigendian to native byte order.
+ *
+ * If this is running on a bigendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in bigendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_Swap32BE(x) SwapOnlyIfNecessary(x)
+
+/**
+ * Swap a 64-bit value from bigendian to native byte order.
+ *
+ * If this is running on a bigendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in bigendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_Swap64BE(x) SwapOnlyIfNecessary(x)
+
+/**
+ * Swap a floating point value from bigendian to native byte order.
+ *
+ * If this is running on a bigendian system, `x` is returned unchanged.
+ *
+ * This macro never references `x` more than once, avoiding side effects.
+ *
+ * \param x the value to swap, in bigendian byte order.
+ * \returns `x` in native byte order.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_SwapFloatBE(x) SwapOnlyIfNecessary(x)
+
+#elif SDL_BYTEORDER == SDL_LIL_ENDIAN
+#define SDL_Swap16LE(x)     (x)
+#define SDL_Swap32LE(x)     (x)
+#define SDL_Swap64LE(x)     (x)
+#define SDL_SwapFloatLE(x)  (x)
+#define SDL_Swap16BE(x)     SDL_Swap16(x)
+#define SDL_Swap32BE(x)     SDL_Swap32(x)
+#define SDL_Swap64BE(x)     SDL_Swap64(x)
+#define SDL_SwapFloatBE(x)  SDL_SwapFloat(x)
+#else
+#define SDL_Swap16LE(x)     SDL_Swap16(x)
+#define SDL_Swap32LE(x)     SDL_Swap32(x)
+#define SDL_Swap64LE(x)     SDL_Swap64(x)
+#define SDL_SwapFloatLE(x)  SDL_SwapFloat(x)
+#define SDL_Swap16BE(x)     (x)
+#define SDL_Swap32BE(x)     (x)
+#define SDL_Swap64BE(x)     (x)
+#define SDL_SwapFloatBE(x)  (x)
+#endif
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_endian_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_error.h

@@ -0,0 +1,226 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryError
+ *
+ * Simple error message routines for SDL.
+ *
+ * Most apps will interface with these APIs in exactly one function: when
+ * almost any SDL function call reports failure, you can get a human-readable
+ * string of the problem from SDL_GetError().
+ *
+ * These strings are maintained per-thread, and apps are welcome to set their
+ * own errors, which is popular when building libraries on top of SDL for
+ * other apps to consume. These strings are set by calling SDL_SetError().
+ *
+ * A common usage pattern is to have a function that returns true for success
+ * and false for failure, and do this when something fails:
+ *
+ * ```c
+ * if (something_went_wrong) {
+ *    return SDL_SetError("The thing broke in this specific way: %d", errcode);
+ * }
+ * ```
+ *
+ * It's also common to just return `false` in this case if the failing thing
+ * is known to call SDL_SetError(), so errors simply propagate through.
+ */
+
+#ifndef SDL_error_h_
+#define SDL_error_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Public functions */
+
+
+/**
+ * Set the SDL error message for the current thread.
+ *
+ * Calling this function will replace any previous error message that was set.
+ *
+ * This function always returns false, since SDL frequently uses false to
+ * signify a failing result, leading to this idiom:
+ *
+ * ```c
+ * if (error_code) {
+ *     return SDL_SetError("This operation has failed: %d", error_code);
+ * }
+ * ```
+ *
+ * \param fmt a printf()-style message format string.
+ * \param ... additional parameters matching % tokens in the `fmt` string, if
+ *            any.
+ * \returns false.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ClearError
+ * \sa SDL_GetError
+ * \sa SDL_SetErrorV
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetError(SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(1);
+
+/**
+ * Set the SDL error message for the current thread.
+ *
+ * Calling this function will replace any previous error message that was set.
+ *
+ * \param fmt a printf()-style message format string.
+ * \param ap a variable argument list.
+ * \returns false.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ClearError
+ * \sa SDL_GetError
+ * \sa SDL_SetError
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetErrorV(SDL_PRINTF_FORMAT_STRING const char *fmt, va_list ap) SDL_PRINTF_VARARG_FUNCV(1);
+
+/**
+ * Set an error indicating that memory allocation failed.
+ *
+ * This function does not do any memory allocation.
+ *
+ * \returns false.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_OutOfMemory(void);
+
+/**
+ * Retrieve a message about the last error that occurred on the current
+ * thread.
+ *
+ * It is possible for multiple errors to occur before calling SDL_GetError().
+ * Only the last error is returned.
+ *
+ * The message is only applicable when an SDL function has signaled an error.
+ * You must check the return values of SDL function calls to determine when to
+ * appropriately call SDL_GetError(). You should *not* use the results of
+ * SDL_GetError() to decide if an error has occurred! Sometimes SDL will set
+ * an error string even when reporting success.
+ *
+ * SDL will *not* clear the error string for successful API calls. You *must*
+ * check return values for failure cases before you can assume the error
+ * string applies.
+ *
+ * Error strings are set per-thread, so an error set in a different thread
+ * will not interfere with the current thread's operation.
+ *
+ * The returned value is a thread-local string which will remain valid until
+ * the current thread's error string is changed. The caller should make a copy
+ * if the value is needed after the next SDL API call.
+ *
+ * \returns a message with information about the specific error that occurred,
+ *          or an empty string if there hasn't been an error message set since
+ *          the last call to SDL_ClearError().
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ClearError
+ * \sa SDL_SetError
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetError(void);
+
+/**
+ * Clear any previous error message for this thread.
+ *
+ * \returns true.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetError
+ * \sa SDL_SetError
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_ClearError(void);
+
+/**
+ *  \name Internal error functions
+ *
+ *  \internal
+ *  Private error reporting function - used internally.
+ */
+/* @{ */
+
+/**
+ * A macro to standardize error reporting on unsupported operations.
+ *
+ * This simply calls SDL_SetError() with a standardized error string, for
+ * convenience, consistency, and clarity.
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_Unsupported()               SDL_SetError("That operation is not supported")
+
+/**
+ * A macro to standardize error reporting on unsupported operations.
+ *
+ * This simply calls SDL_SetError() with a standardized error string, for
+ * convenience, consistency, and clarity.
+ *
+ * A common usage pattern inside SDL is this:
+ *
+ * ```c
+ * bool MyFunction(const char *str) {
+ *     if (!str) {
+ *         return SDL_InvalidParamError("str");  // returns false.
+ *     }
+ *     DoSomething(str);
+ *     return true;
+ * }
+ * ```
+ *
+ * \threadsafety It is safe to call this macro from any thread.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_InvalidParamError(param)    SDL_SetError("Parameter '%s' is invalid", (param))
+
+/* @} *//* Internal error functions */
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_error_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_filesystem.h

@@ -0,0 +1,531 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryFilesystem
+ *
+ * SDL offers an API for examining and manipulating the system's filesystem.
+ * This covers most things one would need to do with directories, except for
+ * actual file I/O (which is covered by [CategoryIOStream](CategoryIOStream)
+ * and [CategoryAsyncIO](CategoryAsyncIO) instead).
+ *
+ * There are functions to answer necessary path questions:
+ *
+ * - Where is my app's data? SDL_GetBasePath().
+ * - Where can I safely write files? SDL_GetPrefPath().
+ * - Where are paths like Downloads, Desktop, Music? SDL_GetUserFolder().
+ * - What is this thing at this location? SDL_GetPathInfo().
+ * - What items live in this folder? SDL_EnumerateDirectory().
+ * - What items live in this folder by wildcard? SDL_GlobDirectory().
+ * - What is my current working directory? SDL_GetCurrentDirectory().
+ *
+ * SDL also offers functions to manipulate the directory tree: renaming,
+ * removing, copying files.
+ */
+
+#ifndef SDL_filesystem_h_
+#define SDL_filesystem_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+
+#include <SDL3/SDL_begin_code.h>
+
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Get the directory where the application was run from.
+ *
+ * SDL caches the result of this call internally, but the first call to this
+ * function is not necessarily fast, so plan accordingly.
+ *
+ * **macOS and iOS Specific Functionality**: If the application is in a ".app"
+ * bundle, this function returns the Resource directory (e.g.
+ * MyApp.app/Contents/Resources/). This behaviour can be overridden by adding
+ * a property to the Info.plist file. Adding a string key with the name
+ * SDL_FILESYSTEM_BASE_DIR_TYPE with a supported value will change the
+ * behaviour.
+ *
+ * Supported values for the SDL_FILESYSTEM_BASE_DIR_TYPE property (Given an
+ * application in /Applications/SDLApp/MyApp.app):
+ *
+ * - `resource`: bundle resource directory (the default). For example:
+ *   `/Applications/SDLApp/MyApp.app/Contents/Resources`
+ * - `bundle`: the Bundle directory. For example:
+ *   `/Applications/SDLApp/MyApp.app/`
+ * - `parent`: the containing directory of the bundle. For example:
+ *   `/Applications/SDLApp/`
+ *
+ * **Nintendo 3DS Specific Functionality**: This function returns "romfs"
+ * directory of the application as it is uncommon to store resources outside
+ * the executable. As such it is not a writable directory.
+ *
+ * The returned path is guaranteed to end with a path separator ('\\' on
+ * Windows, '/' on most other platforms).
+ *
+ * \returns an absolute path in UTF-8 encoding to the application data
+ *          directory. NULL will be returned on error or when the platform
+ *          doesn't implement this functionality, call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetPrefPath
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetBasePath(void);
+
+/**
+ * Get the user-and-app-specific path where files can be written.
+ *
+ * Get the "pref dir". This is meant to be where users can write personal
+ * files (preferences and save games, etc) that are specific to your
+ * application. This directory is unique per user, per application.
+ *
+ * This function will decide the appropriate location in the native
+ * filesystem, create the directory if necessary, and return a string of the
+ * absolute path to the directory in UTF-8 encoding.
+ *
+ * On Windows, the string might look like:
+ *
+ * `C:\\Users\\bob\\AppData\\Roaming\\My Company\\My Program Name\\`
+ *
+ * On Linux, the string might look like:
+ *
+ * `/home/bob/.local/share/My Program Name/`
+ *
+ * On macOS, the string might look like:
+ *
+ * `/Users/bob/Library/Application Support/My Program Name/`
+ *
+ * You should assume the path returned by this function is the only safe place
+ * to write files (and that SDL_GetBasePath(), while it might be writable, or
+ * even the parent of the returned path, isn't where you should be writing
+ * things).
+ *
+ * Both the org and app strings may become part of a directory name, so please
+ * follow these rules:
+ *
+ * - Try to use the same org string (_including case-sensitivity_) for all
+ *   your applications that use this function.
+ * - Always use a unique app string for each one, and make sure it never
+ *   changes for an app once you've decided on it.
+ * - Unicode characters are legal, as long as they are UTF-8 encoded, but...
+ * - ...only use letters, numbers, and spaces. Avoid punctuation like "Game
+ *   Name 2: Bad Guy's Revenge!" ... "Game Name 2" is sufficient.
+ *
+ * Due to historical mistakes, `org` is allowed to be NULL or "". In such
+ * cases, SDL will omit the org subdirectory, including on platforms where it
+ * shouldn't, and including on platforms where this would make your app fail
+ * certification for an app store. New apps should definitely specify a real
+ * string for `org`.
+ *
+ * The returned path is guaranteed to end with a path separator ('\\' on
+ * Windows, '/' on most other platforms).
+ *
+ * \param org the name of your organization.
+ * \param app the name of your application.
+ * \returns a UTF-8 string of the user directory in platform-dependent
+ *          notation. NULL if there's a problem (creating directory failed,
+ *          etc.). This should be freed with SDL_free() when it is no longer
+ *          needed.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetBasePath
+ */
+extern SDL_DECLSPEC char * SDLCALL SDL_GetPrefPath(const char *org, const char *app);
+
+/**
+ * The type of the OS-provided default folder for a specific purpose.
+ *
+ * Note that the Trash folder isn't included here, because trashing files
+ * usually involves extra OS-specific functionality to remember the file's
+ * original location.
+ *
+ * The folders supported per platform are:
+ *
+ * |             | Windows | macOS/iOS | tvOS | Unix (XDG) | Haiku | Emscripten |
+ * | ----------- | ------- | --------- | ---- | ---------- | ----- | ---------- |
+ * | HOME        | X       | X         |      | X          | X     | X          |
+ * | DESKTOP     | X       | X         |      | X          | X     |            |
+ * | DOCUMENTS   | X       | X         |      | X          |       |            |
+ * | DOWNLOADS   | Vista+  | X         |      | X          |       |            |
+ * | MUSIC       | X       | X         |      | X          |       |            |
+ * | PICTURES    | X       | X         |      | X          |       |            |
+ * | PUBLICSHARE |         | X         |      | X          |       |            |
+ * | SAVEDGAMES  | Vista+  |           |      |            |       |            |
+ * | SCREENSHOTS | Vista+  |           |      |            |       |            |
+ * | TEMPLATES   | X       | X         |      | X          |       |            |
+ * | VIDEOS      | X       | X*        |      | X          |       |            |
+ *
+ * Note that on macOS/iOS, the Videos folder is called "Movies".
+ *
+ * \since This enum is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetUserFolder
+ */
+typedef enum SDL_Folder
+{
+    SDL_FOLDER_HOME,        /**< The folder which contains all of the current user's data, preferences, and documents. It usually contains most of the other folders. If a requested folder does not exist, the home folder can be considered a safe fallback to store a user's documents. */
+    SDL_FOLDER_DESKTOP,     /**< The folder of files that are displayed on the desktop. Note that the existence of a desktop folder does not guarantee that the system does show icons on its desktop; certain GNU/Linux distros with a graphical environment may not have desktop icons. */
+    SDL_FOLDER_DOCUMENTS,   /**< User document files, possibly application-specific. This is a good place to save a user's projects. */
+    SDL_FOLDER_DOWNLOADS,   /**< Standard folder for user files downloaded from the internet. */
+    SDL_FOLDER_MUSIC,       /**< Music files that can be played using a standard music player (mp3, ogg...). */
+    SDL_FOLDER_PICTURES,    /**< Image files that can be displayed using a standard viewer (png, jpg...). */
+    SDL_FOLDER_PUBLICSHARE, /**< Files that are meant to be shared with other users on the same computer. */
+    SDL_FOLDER_SAVEDGAMES,  /**< Save files for games. */
+    SDL_FOLDER_SCREENSHOTS, /**< Application screenshots. */
+    SDL_FOLDER_TEMPLATES,   /**< Template files to be used when the user requests the desktop environment to create a new file in a certain folder, such as "New Text File.txt".  Any file in the Templates folder can be used as a starting point for a new file. */
+    SDL_FOLDER_VIDEOS,      /**< Video files that can be played using a standard video player (mp4, webm...). */
+    SDL_FOLDER_COUNT        /**< Total number of types in this enum, not a folder type by itself. */
+} SDL_Folder;
+
+/**
+ * Finds the most suitable user folder for a specific purpose.
+ *
+ * Many OSes provide certain standard folders for certain purposes, such as
+ * storing pictures, music or videos for a certain user. This function gives
+ * the path for many of those special locations.
+ *
+ * This function is specifically for _user_ folders, which are meant for the
+ * user to access and manage. For application-specific folders, meant to hold
+ * data for the application to manage, see SDL_GetBasePath() and
+ * SDL_GetPrefPath().
+ *
+ * The returned path is guaranteed to end with a path separator ('\\' on
+ * Windows, '/' on most other platforms).
+ *
+ * If NULL is returned, the error may be obtained with SDL_GetError().
+ *
+ * \param folder the type of folder to find.
+ * \returns either a null-terminated C string containing the full path to the
+ *          folder, or NULL if an error happened.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetUserFolder(SDL_Folder folder);
+
+
+/* Abstract filesystem interface */
+
+/**
+ * Types of filesystem entries.
+ *
+ * Note that there may be other sorts of items on a filesystem: devices,
+ * symlinks, named pipes, etc. They are currently reported as
+ * SDL_PATHTYPE_OTHER.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ *
+ * \sa SDL_PathInfo
+ */
+typedef enum SDL_PathType
+{
+    SDL_PATHTYPE_NONE,      /**< path does not exist */
+    SDL_PATHTYPE_FILE,      /**< a normal file */
+    SDL_PATHTYPE_DIRECTORY, /**< a directory */
+    SDL_PATHTYPE_OTHER      /**< something completely different like a device node (not a symlink, those are always followed) */
+} SDL_PathType;
+
+/**
+ * Information about a path on the filesystem.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetPathInfo
+ * \sa SDL_GetStoragePathInfo
+ */
+typedef struct SDL_PathInfo
+{
+    SDL_PathType type;      /**< the path type */
+    Uint64 size;            /**< the file size in bytes */
+    SDL_Time create_time;   /**< the time when the path was created */
+    SDL_Time modify_time;   /**< the last time the path was modified */
+    SDL_Time access_time;   /**< the last time the path was read */
+} SDL_PathInfo;
+
+/**
+ * Flags for path matching.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_GlobDirectory
+ * \sa SDL_GlobStorageDirectory
+ */
+typedef Uint32 SDL_GlobFlags;
+
+#define SDL_GLOB_CASEINSENSITIVE (1u << 0)
+
+/**
+ * Create a directory, and any missing parent directories.
+ *
+ * This reports success if `path` already exists as a directory.
+ *
+ * If parent directories are missing, it will also create them. Note that if
+ * this fails, it will not remove any parent directories it already made.
+ *
+ * \param path the path of the directory to create.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_CreateDirectory(const char *path);
+
+/**
+ * Possible results from an enumeration callback.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ *
+ * \sa SDL_EnumerateDirectoryCallback
+ */
+typedef enum SDL_EnumerationResult
+{
+    SDL_ENUM_CONTINUE,   /**< Value that requests that enumeration continue. */
+    SDL_ENUM_SUCCESS,    /**< Value that requests that enumeration stop, successfully. */
+    SDL_ENUM_FAILURE     /**< Value that requests that enumeration stop, as a failure. */
+} SDL_EnumerationResult;
+
+/**
+ * Callback for directory enumeration.
+ *
+ * Enumeration of directory entries will continue until either all entries
+ * have been provided to the callback, or the callback has requested a stop
+ * through its return value.
+ *
+ * Returning SDL_ENUM_CONTINUE will let enumeration proceed, calling the
+ * callback with further entries. SDL_ENUM_SUCCESS and SDL_ENUM_FAILURE will
+ * terminate the enumeration early, and dictate the return value of the
+ * enumeration function itself.
+ *
+ * `dirname` is guaranteed to end with a path separator ('\\' on Windows, '/'
+ * on most other platforms).
+ *
+ * \param userdata an app-controlled pointer that is passed to the callback.
+ * \param dirname the directory that is being enumerated.
+ * \param fname the next entry in the enumeration.
+ * \returns how the enumeration should proceed.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_EnumerateDirectory
+ */
+typedef SDL_EnumerationResult (SDLCALL *SDL_EnumerateDirectoryCallback)(void *userdata, const char *dirname, const char *fname);
+
+/**
+ * Enumerate a directory through a callback function.
+ *
+ * This function provides every directory entry through an app-provided
+ * callback, called once for each directory entry, until all results have been
+ * provided or the callback returns either SDL_ENUM_SUCCESS or
+ * SDL_ENUM_FAILURE.
+ *
+ * This will return false if there was a system problem in general, or if a
+ * callback returns SDL_ENUM_FAILURE. A successful return means a callback
+ * returned SDL_ENUM_SUCCESS to halt enumeration, or all directory entries
+ * were enumerated.
+ *
+ * \param path the path of the directory to enumerate.
+ * \param callback a function that is called for each entry in the directory.
+ * \param userdata a pointer that is passed to `callback`.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_EnumerateDirectory(const char *path, SDL_EnumerateDirectoryCallback callback, void *userdata);
+
+/**
+ * Remove a file or an empty directory.
+ *
+ * Directories that are not empty will fail; this function will not recursely
+ * delete directory trees.
+ *
+ * \param path the path to remove from the filesystem.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_RemovePath(const char *path);
+
+/**
+ * Rename a file or directory.
+ *
+ * If the file at `newpath` already exists, it will be replaced.
+ *
+ * Note that this will not copy files across filesystems/drives/volumes, as
+ * that is a much more complicated (and possibly time-consuming) operation.
+ *
+ * Which is to say, if this function fails, SDL_CopyFile() to a temporary file
+ * in the same directory as `newpath`, then SDL_RenamePath() from the
+ * temporary file to `newpath` and SDL_RemovePath() on `oldpath` might work
+ * for files. Renaming a non-empty directory across filesystems is
+ * dramatically more complex, however.
+ *
+ * \param oldpath the old path.
+ * \param newpath the new path.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_RenamePath(const char *oldpath, const char *newpath);
+
+/**
+ * Copy a file.
+ *
+ * If the file at `newpath` already exists, it will be overwritten with the
+ * contents of the file at `oldpath`.
+ *
+ * This function will block until the copy is complete, which might be a
+ * significant time for large files on slow disks. On some platforms, the copy
+ * can be handed off to the OS itself, but on others SDL might just open both
+ * paths, and read from one and write to the other.
+ *
+ * Note that this is not an atomic operation! If something tries to read from
+ * `newpath` while the copy is in progress, it will see an incomplete copy of
+ * the data, and if the calling thread terminates (or the power goes out)
+ * during the copy, `newpath`'s previous contents will be gone, replaced with
+ * an incomplete copy of the data. To avoid this risk, it is recommended that
+ * the app copy to a temporary file in the same directory as `newpath`, and if
+ * the copy is successful, use SDL_RenamePath() to replace `newpath` with the
+ * temporary file. This will ensure that reads of `newpath` will either see a
+ * complete copy of the data, or it will see the pre-copy state of `newpath`.
+ *
+ * This function attempts to synchronize the newly-copied data to disk before
+ * returning, if the platform allows it, so that the renaming trick will not
+ * have a problem in a system crash or power failure, where the file could be
+ * renamed but the contents never made it from the system file cache to the
+ * physical disk.
+ *
+ * If the copy fails for any reason, the state of `newpath` is undefined. It
+ * might be half a copy, it might be the untouched data of what was already
+ * there, or it might be a zero-byte file, etc.
+ *
+ * \param oldpath the old path.
+ * \param newpath the new path.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread, but this
+ *               operation is not atomic, so the app might need to protect
+ *               access to specific paths from other threads if appropriate.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_CopyFile(const char *oldpath, const char *newpath);
+
+/**
+ * Get information about a filesystem path.
+ *
+ * \param path the path to query.
+ * \param info a pointer filled in with information about the path, or NULL to
+ *             check for the existence of a file.
+ * \returns true on success or false if the file doesn't exist, or another
+ *          failure; call SDL_GetError() for more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_GetPathInfo(const char *path, SDL_PathInfo *info);
+
+/**
+ * Enumerate a directory tree, filtered by pattern, and return a list.
+ *
+ * Files are filtered out if they don't match the string in `pattern`, which
+ * may contain wildcard characters `*` (match everything) and `?` (match one
+ * character). If pattern is NULL, no filtering is done and all results are
+ * returned. Subdirectories are permitted, and are specified with a path
+ * separator of `/`. Wildcard characters `*` and `?` never match a path
+ * separator.
+ *
+ * `flags` may be set to SDL_GLOB_CASEINSENSITIVE to make the pattern matching
+ * case-insensitive.
+ *
+ * The returned array is always NULL-terminated, for your iterating
+ * convenience, but if `count` is non-NULL, on return it will contain the
+ * number of items in the array, not counting the NULL terminator.
+ *
+ * \param path the path of the directory to enumerate.
+ * \param pattern the pattern that files in the directory must match. Can be
+ *                NULL.
+ * \param flags `SDL_GLOB_*` bitflags that affect this search.
+ * \param count on return, will be set to the number of items in the returned
+ *              array. Can be NULL.
+ * \returns an array of strings on success or NULL on failure; call
+ *          SDL_GetError() for more information. This is a single allocation
+ *          that should be freed with SDL_free() when it is no longer needed.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC char ** SDLCALL SDL_GlobDirectory(const char *path, const char *pattern, SDL_GlobFlags flags, int *count);
+
+/**
+ * Get what the system believes is the "current working directory."
+ *
+ * For systems without a concept of a current working directory, this will
+ * still attempt to provide something reasonable.
+ *
+ * SDL does not provide a means to _change_ the current working directory; for
+ * platforms without this concept, this would cause surprises with file access
+ * outside of SDL.
+ *
+ * The returned path is guaranteed to end with a path separator ('\\' on
+ * Windows, '/' on most other platforms).
+ *
+ * \returns a UTF-8 string of the current working directory in
+ *          platform-dependent notation. NULL if there's a problem. This
+ *          should be freed with SDL_free() when it is no longer needed.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC char * SDLCALL SDL_GetCurrentDirectory(void);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_filesystem_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_guid.h

@@ -0,0 +1,106 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: GUID */
+
+/**
+ * # CategoryGUID
+ *
+ * A GUID is a 128-bit value that represents something that is uniquely
+ * identifiable by this value: "globally unique."
+ *
+ * SDL provides functions to convert a GUID to/from a string.
+ */
+
+#ifndef SDL_guid_h_
+#define SDL_guid_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * An SDL_GUID is a 128-bit identifier for an input device that identifies
+ * that device across runs of SDL programs on the same platform.
+ *
+ * If the device is detached and then re-attached to a different port, or if
+ * the base system is rebooted, the device should still report the same GUID.
+ *
+ * GUIDs are as precise as possible but are not guaranteed to distinguish
+ * physically distinct but equivalent devices. For example, two game
+ * controllers from the same vendor with the same product ID and revision may
+ * have the same GUID.
+ *
+ * GUIDs may be platform-dependent (i.e., the same device may report different
+ * GUIDs on different operating systems).
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_GUID {
+    Uint8 data[16];
+} SDL_GUID;
+
+/* Function prototypes */
+
+/**
+ * Get an ASCII string representation for a given SDL_GUID.
+ *
+ * \param guid the SDL_GUID you wish to convert to string.
+ * \param pszGUID buffer in which to write the ASCII string.
+ * \param cbGUID the size of pszGUID, should be at least 33 bytes.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_StringToGUID
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_GUIDToString(SDL_GUID guid, char *pszGUID, int cbGUID);
+
+/**
+ * Convert a GUID string into a SDL_GUID structure.
+ *
+ * Performs no error checking. If this function is given a string containing
+ * an invalid GUID, the function will silently succeed, but the GUID generated
+ * will not be useful.
+ *
+ * \param pchGUID string containing an ASCII representation of a GUID.
+ * \returns a SDL_GUID structure.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GUIDToString
+ */
+extern SDL_DECLSPEC SDL_GUID SDLCALL SDL_StringToGUID(const char *pchGUID);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_guid_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_hidapi.h

@@ -0,0 +1,571 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: HIDAPI */
+
+/**
+ * # CategoryHIDAPI
+ *
+ * Header file for SDL HIDAPI functions.
+ *
+ * This is an adaptation of the original HIDAPI interface by Alan Ott, and
+ * includes source code licensed under the following license:
+ *
+ * ```
+ * HIDAPI - Multi-Platform library for
+ * communication with HID devices.
+ *
+ * Copyright 2009, Alan Ott, Signal 11 Software.
+ * All Rights Reserved.
+ *
+ * This software may be used by anyone for any reason so
+ * long as the copyright notice in the source files
+ * remains intact.
+ * ```
+ *
+ * (Note that this license is the same as item three of SDL's zlib license, so
+ * it adds no new requirements on the user.)
+ *
+ * If you would like a version of SDL without this code, you can build SDL
+ * with SDL_HIDAPI_DISABLED defined to 1. You might want to do this for
+ * example on iOS or tvOS to avoid a dependency on the CoreBluetooth
+ * framework.
+ */
+
+#ifndef SDL_hidapi_h_
+#define SDL_hidapi_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_properties.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * An opaque handle representing an open HID device.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_hid_device SDL_hid_device;
+
+/**
+ * HID underlying bus types.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_hid_bus_type {
+    /** Unknown bus type */
+    SDL_HID_API_BUS_UNKNOWN = 0x00,
+
+    /** USB bus
+       Specifications:
+       https://usb.org/hid */
+    SDL_HID_API_BUS_USB = 0x01,
+
+    /** Bluetooth or Bluetooth LE bus
+       Specifications:
+       https://www.bluetooth.com/specifications/specs/human-interface-device-profile-1-1-1/
+       https://www.bluetooth.com/specifications/specs/hid-service-1-0/
+       https://www.bluetooth.com/specifications/specs/hid-over-gatt-profile-1-0/ */
+    SDL_HID_API_BUS_BLUETOOTH = 0x02,
+
+    /** I2C bus
+       Specifications:
+       https://docs.microsoft.com/previous-versions/windows/hardware/design/dn642101(v=vs.85) */
+    SDL_HID_API_BUS_I2C = 0x03,
+
+    /** SPI bus
+       Specifications:
+       https://www.microsoft.com/download/details.aspx?id=103325 */
+    SDL_HID_API_BUS_SPI = 0x04
+
+} SDL_hid_bus_type;
+
+/** hidapi info structure */
+
+/**
+ * Information about a connected HID device
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_hid_device_info
+{
+    /** Platform-specific device path */
+    char *path;
+    /** Device Vendor ID */
+    unsigned short vendor_id;
+    /** Device Product ID */
+    unsigned short product_id;
+    /** Serial Number */
+    wchar_t *serial_number;
+    /** Device Release Number in binary-coded decimal,
+        also known as Device Version Number */
+    unsigned short release_number;
+    /** Manufacturer String */
+    wchar_t *manufacturer_string;
+    /** Product string */
+    wchar_t *product_string;
+    /** Usage Page for this Device/Interface
+        (Windows/Mac/hidraw only) */
+    unsigned short usage_page;
+    /** Usage for this Device/Interface
+        (Windows/Mac/hidraw only) */
+    unsigned short usage;
+    /** The USB interface which this logical device
+        represents.
+
+        Valid only if the device is a USB HID device.
+        Set to -1 in all other cases.
+    */
+    int interface_number;
+
+    /** Additional information about the USB interface.
+        Valid on libusb and Android implementations. */
+    int interface_class;
+    int interface_subclass;
+    int interface_protocol;
+
+    /** Underlying bus type */
+    SDL_hid_bus_type bus_type;
+
+    /** Pointer to the next device */
+    struct SDL_hid_device_info *next;
+
+} SDL_hid_device_info;
+
+
+/**
+ * Initialize the HIDAPI library.
+ *
+ * This function initializes the HIDAPI library. Calling it is not strictly
+ * necessary, as it will be called automatically by SDL_hid_enumerate() and
+ * any of the SDL_hid_open_*() functions if it is needed. This function should
+ * be called at the beginning of execution however, if there is a chance of
+ * HIDAPI handles being opened by different threads simultaneously.
+ *
+ * Each call to this function should have a matching call to SDL_hid_exit()
+ *
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_hid_exit
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_init(void);
+
+/**
+ * Finalize the HIDAPI library.
+ *
+ * This function frees all of the static data associated with HIDAPI. It
+ * should be called at the end of execution to avoid memory leaks.
+ *
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_hid_init
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_exit(void);
+
+/**
+ * Check to see if devices may have been added or removed.
+ *
+ * Enumerating the HID devices is an expensive operation, so you can call this
+ * to see if there have been any system device changes since the last call to
+ * this function. A change in the counter returned doesn't necessarily mean
+ * that anything has changed, but you can call SDL_hid_enumerate() to get an
+ * updated device list.
+ *
+ * Calling this function for the first time may cause a thread or other system
+ * resource to be allocated to track device change notifications.
+ *
+ * \returns a change counter that is incremented with each potential device
+ *          change, or 0 if device change detection isn't available.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_hid_enumerate
+ */
+extern SDL_DECLSPEC Uint32 SDLCALL SDL_hid_device_change_count(void);
+
+/**
+ * Enumerate the HID Devices.
+ *
+ * This function returns a linked list of all the HID devices attached to the
+ * system which match vendor_id and product_id. If `vendor_id` is set to 0
+ * then any vendor matches. If `product_id` is set to 0 then any product
+ * matches. If `vendor_id` and `product_id` are both set to 0, then all HID
+ * devices will be returned.
+ *
+ * By default SDL will only enumerate controllers, to reduce risk of hanging
+ * or crashing on bad drivers, but SDL_HINT_HIDAPI_ENUMERATE_ONLY_CONTROLLERS
+ * can be set to "0" to enumerate all HID devices.
+ *
+ * \param vendor_id the Vendor ID (VID) of the types of device to open, or 0
+ *                  to match any vendor.
+ * \param product_id the Product ID (PID) of the types of device to open, or 0
+ *                   to match any product.
+ * \returns a pointer to a linked list of type SDL_hid_device_info, containing
+ *          information about the HID devices attached to the system, or NULL
+ *          in the case of failure. Free this linked list by calling
+ *          SDL_hid_free_enumeration().
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_hid_device_change_count
+ */
+extern SDL_DECLSPEC SDL_hid_device_info * SDLCALL SDL_hid_enumerate(unsigned short vendor_id, unsigned short product_id);
+
+/**
+ * Free an enumeration linked list.
+ *
+ * This function frees a linked list created by SDL_hid_enumerate().
+ *
+ * \param devs pointer to a list of struct_device returned from
+ *             SDL_hid_enumerate().
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_hid_free_enumeration(SDL_hid_device_info *devs);
+
+/**
+ * Open a HID device using a Vendor ID (VID), Product ID (PID) and optionally
+ * a serial number.
+ *
+ * If `serial_number` is NULL, the first device with the specified VID and PID
+ * is opened.
+ *
+ * \param vendor_id the Vendor ID (VID) of the device to open.
+ * \param product_id the Product ID (PID) of the device to open.
+ * \param serial_number the Serial Number of the device to open (Optionally
+ *                      NULL).
+ * \returns a pointer to a SDL_hid_device object on success or NULL on
+ *          failure; call SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC SDL_hid_device * SDLCALL SDL_hid_open(unsigned short vendor_id, unsigned short product_id, const wchar_t *serial_number);
+
+/**
+ * Open a HID device by its path name.
+ *
+ * The path name be determined by calling SDL_hid_enumerate(), or a
+ * platform-specific path name can be used (eg: /dev/hidraw0 on Linux).
+ *
+ * \param path the path name of the device to open.
+ * \returns a pointer to a SDL_hid_device object on success or NULL on
+ *          failure; call SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC SDL_hid_device * SDLCALL SDL_hid_open_path(const char *path);
+
+/**
+ * Get the properties associated with an SDL_hid_device.
+ *
+ * The following read-only properties are provided by SDL:
+ *
+ * - `SDL_PROP_HIDAPI_LIBUSB_DEVICE_HANDLE_POINTER`: the libusb_device_handle
+ *   associated with the device, if it was opened using libusb.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \returns a valid property ID on success or 0 on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.4.0.
+ */
+extern SDL_DECLSPEC SDL_PropertiesID SDLCALL SDL_hid_get_properties(SDL_hid_device *dev);
+
+#define SDL_PROP_HIDAPI_LIBUSB_DEVICE_HANDLE_POINTER   "SDL.hidapi.libusb.device.handle"
+
+/**
+ * Write an Output report to a HID device.
+ *
+ * The first byte of `data` must contain the Report ID. For devices which only
+ * support a single report, this must be set to 0x0. The remaining bytes
+ * contain the report data. Since the Report ID is mandatory, calls to
+ * SDL_hid_write() will always contain one more byte than the report contains.
+ * For example, if a hid report is 16 bytes long, 17 bytes must be passed to
+ * SDL_hid_write(), the Report ID (or 0x0, for devices with a single report),
+ * followed by the report data (16 bytes). In this example, the length passed
+ * in would be 17.
+ *
+ * SDL_hid_write() will send the data on the first OUT endpoint, if one
+ * exists. If it does not, it will send the data through the Control Endpoint
+ * (Endpoint 0).
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param data the data to send, including the report number as the first
+ *             byte.
+ * \param length the length in bytes of the data to send.
+ * \returns the actual number of bytes written and -1 on on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_write(SDL_hid_device *dev, const unsigned char *data, size_t length);
+
+/**
+ * Read an Input report from a HID device with timeout.
+ *
+ * Input reports are returned to the host through the INTERRUPT IN endpoint.
+ * The first byte will contain the Report number if the device uses numbered
+ * reports.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param data a buffer to put the read data into.
+ * \param length the number of bytes to read. For devices with multiple
+ *               reports, make sure to read an extra byte for the report
+ *               number.
+ * \param milliseconds timeout in milliseconds or -1 for blocking wait.
+ * \returns the actual number of bytes read and -1 on on failure; call
+ *          SDL_GetError() for more information. If no packet was available to
+ *          be read within the timeout period, this function returns 0.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_read_timeout(SDL_hid_device *dev, unsigned char *data, size_t length, int milliseconds);
+
+/**
+ * Read an Input report from a HID device.
+ *
+ * Input reports are returned to the host through the INTERRUPT IN endpoint.
+ * The first byte will contain the Report number if the device uses numbered
+ * reports.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param data a buffer to put the read data into.
+ * \param length the number of bytes to read. For devices with multiple
+ *               reports, make sure to read an extra byte for the report
+ *               number.
+ * \returns the actual number of bytes read and -1 on failure; call
+ *          SDL_GetError() for more information. If no packet was available to
+ *          be read and the handle is in non-blocking mode, this function
+ *          returns 0.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_read(SDL_hid_device *dev, unsigned char *data, size_t length);
+
+/**
+ * Set the device handle to be non-blocking.
+ *
+ * In non-blocking mode calls to SDL_hid_read() will return immediately with a
+ * value of 0 if there is no data to be read. In blocking mode, SDL_hid_read()
+ * will wait (block) until there is data to read before returning.
+ *
+ * Nonblocking can be turned on and off at any time.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param nonblock enable or not the nonblocking reads - 1 to enable
+ *                 nonblocking - 0 to disable nonblocking.
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_set_nonblocking(SDL_hid_device *dev, int nonblock);
+
+/**
+ * Send a Feature report to the device.
+ *
+ * Feature reports are sent over the Control endpoint as a Set_Report
+ * transfer. The first byte of `data` must contain the Report ID. For devices
+ * which only support a single report, this must be set to 0x0. The remaining
+ * bytes contain the report data. Since the Report ID is mandatory, calls to
+ * SDL_hid_send_feature_report() will always contain one more byte than the
+ * report contains. For example, if a hid report is 16 bytes long, 17 bytes
+ * must be passed to SDL_hid_send_feature_report(): the Report ID (or 0x0, for
+ * devices which do not use numbered reports), followed by the report data (16
+ * bytes). In this example, the length passed in would be 17.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param data the data to send, including the report number as the first
+ *             byte.
+ * \param length the length in bytes of the data to send, including the report
+ *               number.
+ * \returns the actual number of bytes written and -1 on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_send_feature_report(SDL_hid_device *dev, const unsigned char *data, size_t length);
+
+/**
+ * Get a feature report from a HID device.
+ *
+ * Set the first byte of `data` to the Report ID of the report to be read.
+ * Make sure to allow space for this extra byte in `data`. Upon return, the
+ * first byte will still contain the Report ID, and the report data will start
+ * in data[1].
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param data a buffer to put the read data into, including the Report ID.
+ *             Set the first byte of `data` to the Report ID of the report to
+ *             be read, or set it to zero if your device does not use numbered
+ *             reports.
+ * \param length the number of bytes to read, including an extra byte for the
+ *               report ID. The buffer can be longer than the actual report.
+ * \returns the number of bytes read plus one for the report ID (which is
+ *          still in the first byte), or -1 on on failure; call SDL_GetError()
+ *          for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_get_feature_report(SDL_hid_device *dev, unsigned char *data, size_t length);
+
+/**
+ * Get an input report from a HID device.
+ *
+ * Set the first byte of `data` to the Report ID of the report to be read.
+ * Make sure to allow space for this extra byte in `data`. Upon return, the
+ * first byte will still contain the Report ID, and the report data will start
+ * in data[1].
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param data a buffer to put the read data into, including the Report ID.
+ *             Set the first byte of `data` to the Report ID of the report to
+ *             be read, or set it to zero if your device does not use numbered
+ *             reports.
+ * \param length the number of bytes to read, including an extra byte for the
+ *               report ID. The buffer can be longer than the actual report.
+ * \returns the number of bytes read plus one for the report ID (which is
+ *          still in the first byte), or -1 on on failure; call SDL_GetError()
+ *          for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_get_input_report(SDL_hid_device *dev, unsigned char *data, size_t length);
+
+/**
+ * Close a HID device.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_close(SDL_hid_device *dev);
+
+/**
+ * Get The Manufacturer String from a HID device.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param string a wide string buffer to put the data into.
+ * \param maxlen the length of the buffer in multiples of wchar_t.
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_get_manufacturer_string(SDL_hid_device *dev, wchar_t *string, size_t maxlen);
+
+/**
+ * Get The Product String from a HID device.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param string a wide string buffer to put the data into.
+ * \param maxlen the length of the buffer in multiples of wchar_t.
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_get_product_string(SDL_hid_device *dev, wchar_t *string, size_t maxlen);
+
+/**
+ * Get The Serial Number String from a HID device.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param string a wide string buffer to put the data into.
+ * \param maxlen the length of the buffer in multiples of wchar_t.
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_get_serial_number_string(SDL_hid_device *dev, wchar_t *string, size_t maxlen);
+
+/**
+ * Get a string from a HID device, based on its string index.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param string_index the index of the string to get.
+ * \param string a wide string buffer to put the data into.
+ * \param maxlen the length of the buffer in multiples of wchar_t.
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_get_indexed_string(SDL_hid_device *dev, int string_index, wchar_t *string, size_t maxlen);
+
+/**
+ * Get the device info from a HID device.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \returns a pointer to the SDL_hid_device_info for this hid_device or NULL
+ *          on failure; call SDL_GetError() for more information. This struct
+ *          is valid until the device is closed with SDL_hid_close().
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC SDL_hid_device_info * SDLCALL SDL_hid_get_device_info(SDL_hid_device *dev);
+
+/**
+ * Get a report descriptor from a HID device.
+ *
+ * User has to provide a preallocated buffer where descriptor will be copied
+ * to. The recommended size for a preallocated buffer is 4096 bytes.
+ *
+ * \param dev a device handle returned from SDL_hid_open().
+ * \param buf the buffer to copy descriptor into.
+ * \param buf_size the size of the buffer in bytes.
+ * \returns the number of bytes actually copied or -1 on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_hid_get_report_descriptor(SDL_hid_device *dev, unsigned char *buf, size_t buf_size);
+
+/**
+ * Start or stop a BLE scan on iOS and tvOS to pair Steam Controllers.
+ *
+ * \param active true to start the scan, false to stop the scan.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_hid_ble_scan(bool active);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_hidapi_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_init.h

@@ -0,0 +1,497 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryInit
+ *
+ * All SDL programs need to initialize the library before starting to work
+ * with it.
+ *
+ * Almost everything can simply call SDL_Init() near startup, with a handful
+ * of flags to specify subsystems to touch. These are here to make sure SDL
+ * does not even attempt to touch low-level pieces of the operating system
+ * that you don't intend to use. For example, you might be using SDL for video
+ * and input but chose an external library for audio, and in this case you
+ * would just need to leave off the `SDL_INIT_AUDIO` flag to make sure that
+ * external library has complete control.
+ *
+ * Most apps, when terminating, should call SDL_Quit(). This will clean up
+ * (nearly) everything that SDL might have allocated, and crucially, it'll
+ * make sure that the display's resolution is back to what the user expects if
+ * you had previously changed it for your game.
+ *
+ * SDL3 apps are strongly encouraged to call SDL_SetAppMetadata() at startup
+ * to fill in details about the program. This is completely optional, but it
+ * helps in small ways (we can provide an About dialog box for the macOS menu,
+ * we can name the app in the system's audio mixer, etc). Those that want to
+ * provide a _lot_ of information should look at the more-detailed
+ * SDL_SetAppMetadataProperty().
+ */
+
+#ifndef SDL_init_h_
+#define SDL_init_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_events.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* As of version 0.5, SDL is loaded dynamically into the application */
+
+/**
+ * Initialization flags for SDL_Init and/or SDL_InitSubSystem
+ *
+ * These are the flags which may be passed to SDL_Init(). You should specify
+ * the subsystems which you will be using in your application.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_Init
+ * \sa SDL_Quit
+ * \sa SDL_InitSubSystem
+ * \sa SDL_QuitSubSystem
+ * \sa SDL_WasInit
+ */
+typedef Uint32 SDL_InitFlags;
+
+#define SDL_INIT_AUDIO      0x00000010u /**< `SDL_INIT_AUDIO` implies `SDL_INIT_EVENTS` */
+#define SDL_INIT_VIDEO      0x00000020u /**< `SDL_INIT_VIDEO` implies `SDL_INIT_EVENTS`, should be initialized on the main thread */
+#define SDL_INIT_JOYSTICK   0x00000200u /**< `SDL_INIT_JOYSTICK` implies `SDL_INIT_EVENTS` */
+#define SDL_INIT_HAPTIC     0x00001000u
+#define SDL_INIT_GAMEPAD    0x00002000u /**< `SDL_INIT_GAMEPAD` implies `SDL_INIT_JOYSTICK` */
+#define SDL_INIT_EVENTS     0x00004000u
+#define SDL_INIT_SENSOR     0x00008000u /**< `SDL_INIT_SENSOR` implies `SDL_INIT_EVENTS` */
+#define SDL_INIT_CAMERA     0x00010000u /**< `SDL_INIT_CAMERA` implies `SDL_INIT_EVENTS` */
+
+/**
+ * Return values for optional main callbacks.
+ *
+ * Returning SDL_APP_SUCCESS or SDL_APP_FAILURE from SDL_AppInit,
+ * SDL_AppEvent, or SDL_AppIterate will terminate the program and report
+ * success/failure to the operating system. What that means is
+ * platform-dependent. On Unix, for example, on success, the process error
+ * code will be zero, and on failure it will be 1. This interface doesn't
+ * allow you to return specific exit codes, just whether there was an error
+ * generally or not.
+ *
+ * Returning SDL_APP_CONTINUE from these functions will let the app continue
+ * to run.
+ *
+ * See
+ * [Main callbacks in SDL3](https://wiki.libsdl.org/SDL3/README-main-functions#main-callbacks-in-sdl3)
+ * for complete details.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_AppResult
+{
+    SDL_APP_CONTINUE,   /**< Value that requests that the app continue from the main callbacks. */
+    SDL_APP_SUCCESS,    /**< Value that requests termination with success from the main callbacks. */
+    SDL_APP_FAILURE     /**< Value that requests termination with error from the main callbacks. */
+} SDL_AppResult;
+
+/**
+ * Function pointer typedef for SDL_AppInit.
+ *
+ * These are used by SDL_EnterAppMainCallbacks. This mechanism operates behind
+ * the scenes for apps using the optional main callbacks. Apps that want to
+ * use this should just implement SDL_AppInit directly.
+ *
+ * \param appstate a place where the app can optionally store a pointer for
+ *                 future use.
+ * \param argc the standard ANSI C main's argc; number of elements in `argv`.
+ * \param argv the standard ANSI C main's argv; array of command line
+ *             arguments.
+ * \returns SDL_APP_FAILURE to terminate with an error, SDL_APP_SUCCESS to
+ *          terminate with success, SDL_APP_CONTINUE to continue.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef SDL_AppResult (SDLCALL *SDL_AppInit_func)(void **appstate, int argc, char *argv[]);
+
+/**
+ * Function pointer typedef for SDL_AppIterate.
+ *
+ * These are used by SDL_EnterAppMainCallbacks. This mechanism operates behind
+ * the scenes for apps using the optional main callbacks. Apps that want to
+ * use this should just implement SDL_AppIterate directly.
+ *
+ * \param appstate an optional pointer, provided by the app in SDL_AppInit.
+ * \returns SDL_APP_FAILURE to terminate with an error, SDL_APP_SUCCESS to
+ *          terminate with success, SDL_APP_CONTINUE to continue.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef SDL_AppResult (SDLCALL *SDL_AppIterate_func)(void *appstate);
+
+/**
+ * Function pointer typedef for SDL_AppEvent.
+ *
+ * These are used by SDL_EnterAppMainCallbacks. This mechanism operates behind
+ * the scenes for apps using the optional main callbacks. Apps that want to
+ * use this should just implement SDL_AppEvent directly.
+ *
+ * \param appstate an optional pointer, provided by the app in SDL_AppInit.
+ * \param event the new event for the app to examine.
+ * \returns SDL_APP_FAILURE to terminate with an error, SDL_APP_SUCCESS to
+ *          terminate with success, SDL_APP_CONTINUE to continue.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef SDL_AppResult (SDLCALL *SDL_AppEvent_func)(void *appstate, SDL_Event *event);
+
+/**
+ * Function pointer typedef for SDL_AppQuit.
+ *
+ * These are used by SDL_EnterAppMainCallbacks. This mechanism operates behind
+ * the scenes for apps using the optional main callbacks. Apps that want to
+ * use this should just implement SDL_AppEvent directly.
+ *
+ * \param appstate an optional pointer, provided by the app in SDL_AppInit.
+ * \param result the result code that terminated the app (success or failure).
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef void (SDLCALL *SDL_AppQuit_func)(void *appstate, SDL_AppResult result);
+
+
+/**
+ * Initialize the SDL library.
+ *
+ * SDL_Init() simply forwards to calling SDL_InitSubSystem(). Therefore, the
+ * two may be used interchangeably. Though for readability of your code
+ * SDL_InitSubSystem() might be preferred.
+ *
+ * The file I/O (for example: SDL_IOFromFile) and threading (SDL_CreateThread)
+ * subsystems are initialized by default. Message boxes
+ * (SDL_ShowSimpleMessageBox) also attempt to work without initializing the
+ * video subsystem, in hopes of being useful in showing an error dialog when
+ * SDL_Init fails. You must specifically initialize other subsystems if you
+ * use them in your application.
+ *
+ * Logging (such as SDL_Log) works without initialization, too.
+ *
+ * `flags` may be any of the following OR'd together:
+ *
+ * - `SDL_INIT_AUDIO`: audio subsystem; automatically initializes the events
+ *   subsystem
+ * - `SDL_INIT_VIDEO`: video subsystem; automatically initializes the events
+ *   subsystem, should be initialized on the main thread.
+ * - `SDL_INIT_JOYSTICK`: joystick subsystem; automatically initializes the
+ *   events subsystem
+ * - `SDL_INIT_HAPTIC`: haptic (force feedback) subsystem
+ * - `SDL_INIT_GAMEPAD`: gamepad subsystem; automatically initializes the
+ *   joystick subsystem
+ * - `SDL_INIT_EVENTS`: events subsystem
+ * - `SDL_INIT_SENSOR`: sensor subsystem; automatically initializes the events
+ *   subsystem
+ * - `SDL_INIT_CAMERA`: camera subsystem; automatically initializes the events
+ *   subsystem
+ *
+ * Subsystem initialization is ref-counted, you must call SDL_QuitSubSystem()
+ * for each SDL_InitSubSystem() to correctly shutdown a subsystem manually (or
+ * call SDL_Quit() to force shutdown). If a subsystem is already loaded then
+ * this call will increase the ref-count and return.
+ *
+ * Consider reporting some basic metadata about your application before
+ * calling SDL_Init, using either SDL_SetAppMetadata() or
+ * SDL_SetAppMetadataProperty().
+ *
+ * \param flags subsystem initialization flags.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetAppMetadata
+ * \sa SDL_SetAppMetadataProperty
+ * \sa SDL_InitSubSystem
+ * \sa SDL_Quit
+ * \sa SDL_SetMainReady
+ * \sa SDL_WasInit
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_Init(SDL_InitFlags flags);
+
+/**
+ * Compatibility function to initialize the SDL library.
+ *
+ * This function and SDL_Init() are interchangeable.
+ *
+ * \param flags any of the flags used by SDL_Init(); see SDL_Init for details.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Init
+ * \sa SDL_Quit
+ * \sa SDL_QuitSubSystem
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_InitSubSystem(SDL_InitFlags flags);
+
+/**
+ * Shut down specific SDL subsystems.
+ *
+ * You still need to call SDL_Quit() even if you close all open subsystems
+ * with SDL_QuitSubSystem().
+ *
+ * \param flags any of the flags used by SDL_Init(); see SDL_Init for details.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_InitSubSystem
+ * \sa SDL_Quit
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_QuitSubSystem(SDL_InitFlags flags);
+
+/**
+ * Get a mask of the specified subsystems which are currently initialized.
+ *
+ * \param flags any of the flags used by SDL_Init(); see SDL_Init for details.
+ * \returns a mask of all initialized subsystems if `flags` is 0, otherwise it
+ *          returns the initialization status of the specified subsystems.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Init
+ * \sa SDL_InitSubSystem
+ */
+extern SDL_DECLSPEC SDL_InitFlags SDLCALL SDL_WasInit(SDL_InitFlags flags);
+
+/**
+ * Clean up all initialized subsystems.
+ *
+ * You should call this function even if you have already shutdown each
+ * initialized subsystem with SDL_QuitSubSystem(). It is safe to call this
+ * function even in the case of errors in initialization.
+ *
+ * You can use this function with atexit() to ensure that it is run when your
+ * application is shutdown, but it is not wise to do this from a library or
+ * other dynamically loaded code.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Init
+ * \sa SDL_QuitSubSystem
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_Quit(void);
+
+/**
+ * Return whether this is the main thread.
+ *
+ * On Apple platforms, the main thread is the thread that runs your program's
+ * main() entry point. On other platforms, the main thread is the one that
+ * calls SDL_Init(SDL_INIT_VIDEO), which should usually be the one that runs
+ * your program's main() entry point. If you are using the main callbacks,
+ * SDL_AppInit(), SDL_AppIterate(), and SDL_AppQuit() are all called on the
+ * main thread.
+ *
+ * \returns true if this thread is the main thread, or false otherwise.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_RunOnMainThread
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_IsMainThread(void);
+
+/**
+ * Callback run on the main thread.
+ *
+ * \param userdata an app-controlled pointer that is passed to the callback.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_RunOnMainThread
+ */
+typedef void (SDLCALL *SDL_MainThreadCallback)(void *userdata);
+
+/**
+ * Call a function on the main thread during event processing.
+ *
+ * If this is called on the main thread, the callback is executed immediately.
+ * If this is called on another thread, this callback is queued for execution
+ * on the main thread during event processing.
+ *
+ * Be careful of deadlocks when using this functionality. You should not have
+ * the main thread wait for the current thread while this function is being
+ * called with `wait_complete` true.
+ *
+ * \param callback the callback to call on the main thread.
+ * \param userdata a pointer that is passed to `callback`.
+ * \param wait_complete true to wait for the callback to complete, false to
+ *                      return immediately.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_IsMainThread
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_RunOnMainThread(SDL_MainThreadCallback callback, void *userdata, bool wait_complete);
+
+/**
+ * Specify basic metadata about your app.
+ *
+ * You can optionally provide metadata about your app to SDL. This is not
+ * required, but strongly encouraged.
+ *
+ * There are several locations where SDL can make use of metadata (an "About"
+ * box in the macOS menu bar, the name of the app can be shown on some audio
+ * mixers, etc). Any piece of metadata can be left as NULL, if a specific
+ * detail doesn't make sense for the app.
+ *
+ * This function should be called as early as possible, before SDL_Init.
+ * Multiple calls to this function are allowed, but various state might not
+ * change once it has been set up with a previous call to this function.
+ *
+ * Passing a NULL removes any previous metadata.
+ *
+ * This is a simplified interface for the most important information. You can
+ * supply significantly more detailed metadata with
+ * SDL_SetAppMetadataProperty().
+ *
+ * \param appname The name of the application ("My Game 2: Bad Guy's
+ *                Revenge!").
+ * \param appversion The version of the application ("1.0.0beta5" or a git
+ *                   hash, or whatever makes sense).
+ * \param appidentifier A unique string in reverse-domain format that
+ *                      identifies this app ("com.example.mygame2").
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetAppMetadataProperty
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetAppMetadata(const char *appname, const char *appversion, const char *appidentifier);
+
+/**
+ * Specify metadata about your app through a set of properties.
+ *
+ * You can optionally provide metadata about your app to SDL. This is not
+ * required, but strongly encouraged.
+ *
+ * There are several locations where SDL can make use of metadata (an "About"
+ * box in the macOS menu bar, the name of the app can be shown on some audio
+ * mixers, etc). Any piece of metadata can be left out, if a specific detail
+ * doesn't make sense for the app.
+ *
+ * This function should be called as early as possible, before SDL_Init.
+ * Multiple calls to this function are allowed, but various state might not
+ * change once it has been set up with a previous call to this function.
+ *
+ * Once set, this metadata can be read using SDL_GetAppMetadataProperty().
+ *
+ * These are the supported properties:
+ *
+ * - `SDL_PROP_APP_METADATA_NAME_STRING`: The human-readable name of the
+ *   application, like "My Game 2: Bad Guy's Revenge!". This will show up
+ *   anywhere the OS shows the name of the application separately from window
+ *   titles, such as volume control applets, etc. This defaults to "SDL
+ *   Application".
+ * - `SDL_PROP_APP_METADATA_VERSION_STRING`: The version of the app that is
+ *   running; there are no rules on format, so "1.0.3beta2" and "April 22nd,
+ *   2024" and a git hash are all valid options. This has no default.
+ * - `SDL_PROP_APP_METADATA_IDENTIFIER_STRING`: A unique string that
+ *   identifies this app. This must be in reverse-domain format, like
+ *   "com.example.mygame2". This string is used by desktop compositors to
+ *   identify and group windows together, as well as match applications with
+ *   associated desktop settings and icons. If you plan to package your
+ *   application in a container such as Flatpak, the app ID should match the
+ *   name of your Flatpak container as well. This has no default.
+ * - `SDL_PROP_APP_METADATA_CREATOR_STRING`: The human-readable name of the
+ *   creator/developer/maker of this app, like "MojoWorkshop, LLC"
+ * - `SDL_PROP_APP_METADATA_COPYRIGHT_STRING`: The human-readable copyright
+ *   notice, like "Copyright (c) 2024 MojoWorkshop, LLC" or whatnot. Keep this
+ *   to one line, don't paste a copy of a whole software license in here. This
+ *   has no default.
+ * - `SDL_PROP_APP_METADATA_URL_STRING`: A URL to the app on the web. Maybe a
+ *   product page, or a storefront, or even a GitHub repository, for user's
+ *   further information This has no default.
+ * - `SDL_PROP_APP_METADATA_TYPE_STRING`: The type of application this is.
+ *   Currently this string can be "game" for a video game, "mediaplayer" for a
+ *   media player, or generically "application" if nothing else applies.
+ *   Future versions of SDL might add new types. This defaults to
+ *   "application".
+ *
+ * \param name the name of the metadata property to set.
+ * \param value the value of the property, or NULL to remove that property.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetAppMetadataProperty
+ * \sa SDL_SetAppMetadata
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetAppMetadataProperty(const char *name, const char *value);
+
+#define SDL_PROP_APP_METADATA_NAME_STRING         "SDL.app.metadata.name"
+#define SDL_PROP_APP_METADATA_VERSION_STRING      "SDL.app.metadata.version"
+#define SDL_PROP_APP_METADATA_IDENTIFIER_STRING   "SDL.app.metadata.identifier"
+#define SDL_PROP_APP_METADATA_CREATOR_STRING      "SDL.app.metadata.creator"
+#define SDL_PROP_APP_METADATA_COPYRIGHT_STRING    "SDL.app.metadata.copyright"
+#define SDL_PROP_APP_METADATA_URL_STRING          "SDL.app.metadata.url"
+#define SDL_PROP_APP_METADATA_TYPE_STRING         "SDL.app.metadata.type"
+
+/**
+ * Get metadata about your app.
+ *
+ * This returns metadata previously set using SDL_SetAppMetadata() or
+ * SDL_SetAppMetadataProperty(). See SDL_SetAppMetadataProperty() for the list
+ * of available properties and their meanings.
+ *
+ * \param name the name of the metadata property to get.
+ * \returns the current value of the metadata property, or the default if it
+ *          is not set, NULL for properties with no default.
+ *
+ * \threadsafety It is safe to call this function from any thread, although
+ *               the string returned is not protected and could potentially be
+ *               freed if you call SDL_SetAppMetadataProperty() to set that
+ *               property from another thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetAppMetadata
+ * \sa SDL_SetAppMetadataProperty
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetAppMetadataProperty(const char *name);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_init_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_intrin.h

@@ -0,0 +1,407 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: Intrinsics */
+
+/**
+ * # CategoryIntrinsics
+ *
+ * SDL does some preprocessor gymnastics to determine if any CPU-specific
+ * compiler intrinsics are available, as this is not necessarily an easy thing
+ * to calculate, and sometimes depends on quirks of a system, versions of
+ * build tools, and other external forces.
+ *
+ * Apps including SDL's headers will be able to check consistent preprocessor
+ * definitions to decide if it's safe to use compiler intrinsics for a
+ * specific CPU architecture. This check only tells you that the compiler is
+ * capable of using those intrinsics; at runtime, you should still check if
+ * they are available on the current system with the
+ * [CPU info functions](https://wiki.libsdl.org/SDL3/CategoryCPUInfo)
+ * , such as SDL_HasSSE() or SDL_HasNEON(). Otherwise, the process might crash
+ * for using an unsupported CPU instruction.
+ *
+ * SDL only sets preprocessor defines for CPU intrinsics if they are
+ * supported, so apps should check with `#ifdef` and not `#if`.
+ *
+ * SDL will also include the appropriate instruction-set-specific support
+ * headers, so if SDL decides to define SDL_SSE2_INTRINSICS, it will also
+ * `#include <emmintrin.h>` as well.
+ */
+
+#ifndef SDL_intrin_h_
+#define SDL_intrin_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * Defined if (and only if) the compiler supports Loongarch LSX intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<lsxintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_LASX_INTRINSICS
+ */
+#define SDL_LSX_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Loongarch LSX intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<lasxintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_LASX_INTRINSICS
+ */
+#define SDL_LASX_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports ARM NEON intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<armintr.h>`
+ * `<arm_neon.h>`, `<arm64intr.h>`, and `<arm64_neon.h>`, as appropriate.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_NEON_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports PowerPC Altivec intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<altivec.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_ALTIVEC_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel MMX intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<mmintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_SSE_INTRINSICS
+ */
+#define SDL_MMX_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel SSE intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<xmmintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_SSE2_INTRINSICS
+ * \sa SDL_SSE3_INTRINSICS
+ * \sa SDL_SSE4_1_INTRINSICS
+ * \sa SDL_SSE4_2_INTRINSICS
+ */
+#define SDL_SSE_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel SSE2 intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<emmintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_SSE_INTRINSICS
+ * \sa SDL_SSE3_INTRINSICS
+ * \sa SDL_SSE4_1_INTRINSICS
+ * \sa SDL_SSE4_2_INTRINSICS
+ */
+#define SDL_SSE2_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel SSE3 intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<pmmintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_SSE_INTRINSICS
+ * \sa SDL_SSE2_INTRINSICS
+ * \sa SDL_SSE4_1_INTRINSICS
+ * \sa SDL_SSE4_2_INTRINSICS
+ */
+#define SDL_SSE3_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel SSE4.1 intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<smmintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_SSE_INTRINSICS
+ * \sa SDL_SSE2_INTRINSICS
+ * \sa SDL_SSE3_INTRINSICS
+ * \sa SDL_SSE4_2_INTRINSICS
+ */
+#define SDL_SSE4_1_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel SSE4.2 intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<nmmintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_SSE_INTRINSICS
+ * \sa SDL_SSE2_INTRINSICS
+ * \sa SDL_SSE3_INTRINSICS
+ * \sa SDL_SSE4_1_INTRINSICS
+ */
+#define SDL_SSE4_2_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel AVX intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<immintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_AVX2_INTRINSICS
+ * \sa SDL_AVX512F_INTRINSICS
+ */
+#define SDL_AVX_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel AVX2 intrinsics.
+ *
+ * If this macro is defined, SDL will have already included `<immintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_AVX_INTRINSICS
+ * \sa SDL_AVX512F_INTRINSICS
+ */
+#define SDL_AVX2_INTRINSICS 1
+
+/**
+ * Defined if (and only if) the compiler supports Intel AVX-512F intrinsics.
+ *
+ * AVX-512F is also sometimes referred to as "AVX-512 Foundation."
+ *
+ * If this macro is defined, SDL will have already included `<immintrin.h>`
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_AVX_INTRINSICS
+ * \sa SDL_AVX2_INTRINSICS
+ */
+#define SDL_AVX512F_INTRINSICS 1
+#endif
+
+/* Need to do this here because intrin.h has C++ code in it */
+/* Visual Studio 2005 has a bug where intrin.h conflicts with winnt.h */
+#if defined(_MSC_VER) && (_MSC_VER >= 1500) && (defined(_M_IX86) || defined(_M_X64))
+#ifdef __clang__
+/* As of Clang 11, '_m_prefetchw' is conflicting with the winnt.h's version,
+   so we define the needed '_m_prefetch' here as a pseudo-header, until the issue is fixed. */
+#ifndef __PRFCHWINTRIN_H
+#define __PRFCHWINTRIN_H
+static __inline__ void __attribute__((__always_inline__, __nodebug__))
+_m_prefetch(void *__P)
+{
+  __builtin_prefetch (__P, 0, 3 /* _MM_HINT_T0 */);
+}
+#endif /* __PRFCHWINTRIN_H */
+#endif /* __clang__ */
+#include <intrin.h>
+
+#elif defined(__MINGW64_VERSION_MAJOR)
+#include <intrin.h>
+#if defined(__ARM_NEON) && !defined(SDL_DISABLE_NEON)
+#  define SDL_NEON_INTRINSICS 1
+#  include <arm_neon.h>
+#endif
+
+#else
+/* altivec.h redefining bool causes a number of problems, see bugs 3993 and 4392, so you need to explicitly define SDL_ENABLE_ALTIVEC to have it included. */
+#if defined(__ALTIVEC__) && defined(SDL_ENABLE_ALTIVEC)
+#define SDL_ALTIVEC_INTRINSICS 1
+#include <altivec.h>
+#endif
+#ifndef SDL_DISABLE_NEON
+#  ifdef __ARM_NEON
+#    define SDL_NEON_INTRINSICS 1
+#    include <arm_neon.h>
+#  elif defined(SDL_PLATFORM_WINDOWS)
+/* Visual Studio doesn't define __ARM_ARCH, but _M_ARM (if set, always 7), and _M_ARM64 (if set, always 1). */
+#    ifdef _M_ARM
+#      define SDL_NEON_INTRINSICS 1
+#      include <armintr.h>
+#      include <arm_neon.h>
+#      define __ARM_NEON 1 /* Set __ARM_NEON so that it can be used elsewhere, at compile time */
+#    endif
+#    if defined (_M_ARM64)
+#      define SDL_NEON_INTRINSICS 1
+#      include <arm64intr.h>
+#      include <arm64_neon.h>
+#      define __ARM_NEON 1 /* Set __ARM_NEON so that it can be used elsewhere, at compile time */
+#      define __ARM_ARCH 8
+#    endif
+#  endif
+#endif
+#endif /* compiler version */
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+/**
+ * A macro to decide if the compiler supports `__attribute__((target))`.
+ *
+ * Even though this is defined in SDL's public headers, it is generally not
+ * used directly by apps. Apps should probably just use SDL_TARGETING
+ * directly, instead.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_TARGETING
+ */
+#define SDL_HAS_TARGET_ATTRIBS
+
+#elif defined(__clang__) && defined(__has_attribute)
+# if __has_attribute(target)
+# define SDL_HAS_TARGET_ATTRIBS
+# endif
+#elif defined(__GNUC__) && (__GNUC__ + (__GNUC_MINOR__ >= 9) > 4) /* gcc >= 4.9 */
+# define SDL_HAS_TARGET_ATTRIBS
+#elif defined(__ICC) && __ICC >= 1600
+# define SDL_HAS_TARGET_ATTRIBS
+#endif
+
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro to tag a function as targeting a specific CPU architecture.
+ *
+ * This is a hint to the compiler that a function should be built with support
+ * for a CPU instruction set that might be different than the rest of the
+ * program.
+ *
+ * The particulars of this are explained in the GCC documentation:
+ *
+ * https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-target-function-attribute
+ *
+ * An example of using this feature is to turn on SSE2 support for a specific
+ * function, even if the rest of the source code is not compiled to use SSE2
+ * code:
+ *
+ * ```c
+ * #ifdef SDL_SSE2_INTRINSICS
+ * static void SDL_TARGETING("sse2") DoSomethingWithSSE2(char *x) {
+ *    ...use SSE2 intrinsic functions, etc...
+ * }
+ * #endif
+ *
+ * // later...
+ * #ifdef SDL_SSE2_INTRINSICS
+ * if (SDL_HasSSE2()) {
+ *     DoSomethingWithSSE2(str);
+ * }
+ * #endif
+ * ```
+ *
+ * The application is, on a whole, built without SSE2 instructions, so it will
+ * run on Intel machines that don't support SSE2. But then at runtime, it
+ * checks if the system supports the instructions, and then calls into a
+ * function that uses SSE2 opcodes. The ifdefs make sure that this code isn't
+ * used on platforms that don't have SSE2 at all.
+ *
+ * On compilers without target support, this is defined to nothing.
+ *
+ * This symbol is used by SDL internally, but apps and other libraries are
+ * welcome to use it for their own interfaces as well.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_TARGETING(x) __attribute__((target(x)))
+
+#elif defined(SDL_HAS_TARGET_ATTRIBS)
+# define SDL_TARGETING(x) __attribute__((target(x)))
+#else
+# define SDL_TARGETING(x)
+#endif
+
+#ifdef __loongarch64
+# ifndef SDL_DISABLE_LSX
+#  define SDL_LSX_INTRINSICS 1
+#  include <lsxintrin.h>
+# endif
+# ifndef SDL_DISABLE_LASX
+#  define SDL_LASX_INTRINSICS 1
+#  include <lasxintrin.h>
+# endif
+#endif
+
+#if defined(__x86_64__) || defined(_M_X64) || defined(__i386__) || defined(_M_IX86)
+# if ((defined(_MSC_VER) && !defined(_M_X64)) || defined(__MMX__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(SDL_DISABLE_MMX)
+#  define SDL_MMX_INTRINSICS 1
+#  include <mmintrin.h>
+# endif
+# if (defined(_MSC_VER) || defined(__SSE__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(SDL_DISABLE_SSE)
+#  define SDL_SSE_INTRINSICS 1
+#  include <xmmintrin.h>
+# endif
+# if (defined(_MSC_VER) || defined(__SSE2__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(SDL_DISABLE_SSE2)
+#  define SDL_SSE2_INTRINSICS 1
+#  include <emmintrin.h>
+# endif
+# if (defined(_MSC_VER) || defined(__SSE3__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(SDL_DISABLE_SSE3)
+#  define SDL_SSE3_INTRINSICS 1
+#  include <pmmintrin.h>
+# endif
+# if (defined(_MSC_VER) || defined(__SSE4_1__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(SDL_DISABLE_SSE4_1)
+#  define SDL_SSE4_1_INTRINSICS 1
+#  include <smmintrin.h>
+# endif
+# if (defined(_MSC_VER) || defined(__SSE4_2__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(SDL_DISABLE_SSE4_2)
+#  define SDL_SSE4_2_INTRINSICS 1
+#  include <nmmintrin.h>
+# endif
+# if defined(__clang__) && (defined(_MSC_VER) || defined(__SCE__)) && !defined(__AVX__) && !defined(SDL_DISABLE_AVX)
+#  define SDL_DISABLE_AVX       /* see https://reviews.llvm.org/D20291 and https://reviews.llvm.org/D79194 */
+# endif
+# if (defined(_MSC_VER) || defined(__AVX__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(_M_ARM64EC) && !defined(SDL_DISABLE_AVX)
+#  define SDL_AVX_INTRINSICS 1
+#  include <immintrin.h>
+# endif
+# if defined(__clang__) && (defined(_MSC_VER) || defined(__SCE__)) && !defined(__AVX2__) && !defined(SDL_DISABLE_AVX2)
+#  define SDL_DISABLE_AVX2      /* see https://reviews.llvm.org/D20291 and https://reviews.llvm.org/D79194 */
+# endif
+# if (defined(_MSC_VER) || defined(__AVX2__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(_M_ARM64EC) && !defined(SDL_DISABLE_AVX2)
+#  define SDL_AVX2_INTRINSICS 1
+#  include <immintrin.h>
+# endif
+# if defined(__clang__) && (defined(_MSC_VER) || defined(__SCE__)) && !defined(__AVX512F__) && !defined(SDL_DISABLE_AVX512F)
+#  define SDL_DISABLE_AVX512F   /* see https://reviews.llvm.org/D20291 and https://reviews.llvm.org/D79194 */
+# endif
+# if (defined(_MSC_VER) || defined(__AVX512F__) || defined(SDL_HAS_TARGET_ATTRIBS)) && !defined(_M_ARM64EC) && !defined(SDL_DISABLE_AVX512F)
+#  define SDL_AVX512F_INTRINSICS 1
+#  include <immintrin.h>
+# endif
+#endif /* defined(__x86_64__) || defined(_M_X64) || defined(__i386__) || defined(_M_IX86) */
+
+#endif /* SDL_intrin_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_keyboard.h

@@ -0,0 +1,608 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryKeyboard
+ *
+ * SDL keyboard management.
+ *
+ * Please refer to the Best Keyboard Practices document for details on how
+ * best to accept keyboard input in various types of programs:
+ *
+ * https://wiki.libsdl.org/SDL3/BestKeyboardPractices
+ */
+
+#ifndef SDL_keyboard_h_
+#define SDL_keyboard_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_keycode.h>
+#include <SDL3/SDL_properties.h>
+#include <SDL3/SDL_rect.h>
+#include <SDL3/SDL_scancode.h>
+#include <SDL3/SDL_video.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * This is a unique ID for a keyboard for the time it is connected to the
+ * system, and is never reused for the lifetime of the application.
+ *
+ * If the keyboard is disconnected and reconnected, it will get a new ID.
+ *
+ * The value 0 is an invalid ID.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef Uint32 SDL_KeyboardID;
+
+/* Function prototypes */
+
+/**
+ * Return whether a keyboard is currently connected.
+ *
+ * \returns true if a keyboard is connected, false otherwise.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyboards
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasKeyboard(void);
+
+/**
+ * Get a list of currently connected keyboards.
+ *
+ * Note that this will include any device or virtual driver that includes
+ * keyboard functionality, including some mice, KVM switches, motherboard
+ * power buttons, etc. You should wait for input from a device before you
+ * consider it actively in use.
+ *
+ * \param count a pointer filled in with the number of keyboards returned, may
+ *              be NULL.
+ * \returns a 0 terminated array of keyboards instance IDs or NULL on failure;
+ *          call SDL_GetError() for more information. This should be freed
+ *          with SDL_free() when it is no longer needed.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyboardNameForID
+ * \sa SDL_HasKeyboard
+ */
+extern SDL_DECLSPEC SDL_KeyboardID * SDLCALL SDL_GetKeyboards(int *count);
+
+/**
+ * Get the name of a keyboard.
+ *
+ * This function returns "" if the keyboard doesn't have a name.
+ *
+ * \param instance_id the keyboard instance ID.
+ * \returns the name of the selected keyboard or NULL on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyboards
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetKeyboardNameForID(SDL_KeyboardID instance_id);
+
+/**
+ * Query the window which currently has keyboard focus.
+ *
+ * \returns the window with keyboard focus.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC SDL_Window * SDLCALL SDL_GetKeyboardFocus(void);
+
+/**
+ * Get a snapshot of the current state of the keyboard.
+ *
+ * The pointer returned is a pointer to an internal SDL array. It will be
+ * valid for the whole lifetime of the application and should not be freed by
+ * the caller.
+ *
+ * A array element with a value of true means that the key is pressed and a
+ * value of false means that it is not. Indexes into this array are obtained
+ * by using SDL_Scancode values.
+ *
+ * Use SDL_PumpEvents() to update the state array.
+ *
+ * This function gives you the current state after all events have been
+ * processed, so if a key or button has been pressed and released before you
+ * process events, then the pressed state will never show up in the
+ * SDL_GetKeyboardState() calls.
+ *
+ * Note: This function doesn't take into account whether shift has been
+ * pressed or not.
+ *
+ * \param numkeys if non-NULL, receives the length of the returned array.
+ * \returns a pointer to an array of key states.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_PumpEvents
+ * \sa SDL_ResetKeyboard
+ */
+extern SDL_DECLSPEC const bool * SDLCALL SDL_GetKeyboardState(int *numkeys);
+
+/**
+ * Clear the state of the keyboard.
+ *
+ * This function will generate key up events for all pressed keys.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyboardState
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ResetKeyboard(void);
+
+/**
+ * Get the current key modifier state for the keyboard.
+ *
+ * \returns an OR'd combination of the modifier keys for the keyboard.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyboardState
+ * \sa SDL_SetModState
+ */
+extern SDL_DECLSPEC SDL_Keymod SDLCALL SDL_GetModState(void);
+
+/**
+ * Set the current key modifier state for the keyboard.
+ *
+ * The inverse of SDL_GetModState(), SDL_SetModState() allows you to impose
+ * modifier key states on your application. Simply pass your desired modifier
+ * states into `modstate`. This value may be a bitwise, OR'd combination of
+ * SDL_Keymod values.
+ *
+ * This does not change the keyboard state, only the key modifier flags that
+ * SDL reports.
+ *
+ * \param modstate the desired SDL_Keymod for the keyboard.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetModState
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_SetModState(SDL_Keymod modstate);
+
+/**
+ * Get the key code corresponding to the given scancode according to the
+ * current keyboard layout.
+ *
+ * If you want to get the keycode as it would be delivered in key events,
+ * including options specified in SDL_HINT_KEYCODE_OPTIONS, then you should
+ * pass `key_event` as true. Otherwise this function simply translates the
+ * scancode based on the given modifier state.
+ *
+ * \param scancode the desired SDL_Scancode to query.
+ * \param modstate the modifier state to use when translating the scancode to
+ *                 a keycode.
+ * \param key_event true if the keycode will be used in key events.
+ * \returns the SDL_Keycode that corresponds to the given SDL_Scancode.
+ *
+ * \threadsafety This function is not thread safe.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyName
+ * \sa SDL_GetScancodeFromKey
+ */
+extern SDL_DECLSPEC SDL_Keycode SDLCALL SDL_GetKeyFromScancode(SDL_Scancode scancode, SDL_Keymod modstate, bool key_event);
+
+/**
+ * Get the scancode corresponding to the given key code according to the
+ * current keyboard layout.
+ *
+ * Note that there may be multiple scancode+modifier states that can generate
+ * this keycode, this will just return the first one found.
+ *
+ * \param key the desired SDL_Keycode to query.
+ * \param modstate a pointer to the modifier state that would be used when the
+ *                 scancode generates this key, may be NULL.
+ * \returns the SDL_Scancode that corresponds to the given SDL_Keycode.
+ *
+ * \threadsafety This function is not thread safe.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyFromScancode
+ * \sa SDL_GetScancodeName
+ */
+extern SDL_DECLSPEC SDL_Scancode SDLCALL SDL_GetScancodeFromKey(SDL_Keycode key, SDL_Keymod *modstate);
+
+/**
+ * Set a human-readable name for a scancode.
+ *
+ * \param scancode the desired SDL_Scancode.
+ * \param name the name to use for the scancode, encoded as UTF-8. The string
+ *             is not copied, so the pointer given to this function must stay
+ *             valid while SDL is being used.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function is not thread safe.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetScancodeName
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetScancodeName(SDL_Scancode scancode, const char *name);
+
+/**
+ * Get a human-readable name for a scancode.
+ *
+ * **Warning**: The returned name is by design not stable across platforms,
+ * e.g. the name for `SDL_SCANCODE_LGUI` is "Left GUI" under Linux but "Left
+ * Windows" under Microsoft Windows, and some scancodes like
+ * `SDL_SCANCODE_NONUSBACKSLASH` don't have any name at all. There are even
+ * scancodes that share names, e.g. `SDL_SCANCODE_RETURN` and
+ * `SDL_SCANCODE_RETURN2` (both called "Return"). This function is therefore
+ * unsuitable for creating a stable cross-platform two-way mapping between
+ * strings and scancodes.
+ *
+ * \param scancode the desired SDL_Scancode to query.
+ * \returns a pointer to the name for the scancode. If the scancode doesn't
+ *          have a name this function returns an empty string ("").
+ *
+ * \threadsafety This function is not thread safe.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetScancodeFromKey
+ * \sa SDL_GetScancodeFromName
+ * \sa SDL_SetScancodeName
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetScancodeName(SDL_Scancode scancode);
+
+/**
+ * Get a scancode from a human-readable name.
+ *
+ * \param name the human-readable scancode name.
+ * \returns the SDL_Scancode, or `SDL_SCANCODE_UNKNOWN` if the name wasn't
+ *          recognized; call SDL_GetError() for more information.
+ *
+ * \threadsafety This function is not thread safe.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyFromName
+ * \sa SDL_GetScancodeFromKey
+ * \sa SDL_GetScancodeName
+ */
+extern SDL_DECLSPEC SDL_Scancode SDLCALL SDL_GetScancodeFromName(const char *name);
+
+/**
+ * Get a human-readable name for a key.
+ *
+ * If the key doesn't have a name, this function returns an empty string ("").
+ *
+ * Letters will be presented in their uppercase form, if applicable.
+ *
+ * \param key the desired SDL_Keycode to query.
+ * \returns a UTF-8 encoded string of the key name.
+ *
+ * \threadsafety This function is not thread safe.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyFromName
+ * \sa SDL_GetKeyFromScancode
+ * \sa SDL_GetScancodeFromKey
+ */
+extern SDL_DECLSPEC const char * SDLCALL SDL_GetKeyName(SDL_Keycode key);
+
+/**
+ * Get a key code from a human-readable name.
+ *
+ * \param name the human-readable key name.
+ * \returns key code, or `SDLK_UNKNOWN` if the name wasn't recognized; call
+ *          SDL_GetError() for more information.
+ *
+ * \threadsafety This function is not thread safe.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetKeyFromScancode
+ * \sa SDL_GetKeyName
+ * \sa SDL_GetScancodeFromName
+ */
+extern SDL_DECLSPEC SDL_Keycode SDLCALL SDL_GetKeyFromName(const char *name);
+
+/**
+ * Start accepting Unicode text input events in a window.
+ *
+ * This function will enable text input (SDL_EVENT_TEXT_INPUT and
+ * SDL_EVENT_TEXT_EDITING events) in the specified window. Please use this
+ * function paired with SDL_StopTextInput().
+ *
+ * Text input events are not received by default.
+ *
+ * On some platforms using this function shows the screen keyboard and/or
+ * activates an IME, which can prevent some key press events from being passed
+ * through.
+ *
+ * \param window the window to enable text input.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetTextInputArea
+ * \sa SDL_StartTextInputWithProperties
+ * \sa SDL_StopTextInput
+ * \sa SDL_TextInputActive
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_StartTextInput(SDL_Window *window);
+
+/**
+ * Text input type.
+ *
+ * These are the valid values for SDL_PROP_TEXTINPUT_TYPE_NUMBER. Not every
+ * value is valid on every platform, but where a value isn't supported, a
+ * reasonable fallback will be used.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ *
+ * \sa SDL_StartTextInputWithProperties
+ */
+typedef enum SDL_TextInputType
+{
+    SDL_TEXTINPUT_TYPE_TEXT,                        /**< The input is text */
+    SDL_TEXTINPUT_TYPE_TEXT_NAME,                   /**< The input is a person's name */
+    SDL_TEXTINPUT_TYPE_TEXT_EMAIL,                  /**< The input is an e-mail address */
+    SDL_TEXTINPUT_TYPE_TEXT_USERNAME,               /**< The input is a username */
+    SDL_TEXTINPUT_TYPE_TEXT_PASSWORD_HIDDEN,        /**< The input is a secure password that is hidden */
+    SDL_TEXTINPUT_TYPE_TEXT_PASSWORD_VISIBLE,       /**< The input is a secure password that is visible */
+    SDL_TEXTINPUT_TYPE_NUMBER,                      /**< The input is a number */
+    SDL_TEXTINPUT_TYPE_NUMBER_PASSWORD_HIDDEN,      /**< The input is a secure PIN that is hidden */
+    SDL_TEXTINPUT_TYPE_NUMBER_PASSWORD_VISIBLE      /**< The input is a secure PIN that is visible */
+} SDL_TextInputType;
+
+/**
+ * Auto capitalization type.
+ *
+ * These are the valid values for SDL_PROP_TEXTINPUT_CAPITALIZATION_NUMBER.
+ * Not every value is valid on every platform, but where a value isn't
+ * supported, a reasonable fallback will be used.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ *
+ * \sa SDL_StartTextInputWithProperties
+ */
+typedef enum SDL_Capitalization
+{
+    SDL_CAPITALIZE_NONE,        /**< No auto-capitalization will be done */
+    SDL_CAPITALIZE_SENTENCES,   /**< The first letter of sentences will be capitalized */
+    SDL_CAPITALIZE_WORDS,       /**< The first letter of words will be capitalized */
+    SDL_CAPITALIZE_LETTERS      /**< All letters will be capitalized */
+} SDL_Capitalization;
+
+/**
+ * Start accepting Unicode text input events in a window, with properties
+ * describing the input.
+ *
+ * This function will enable text input (SDL_EVENT_TEXT_INPUT and
+ * SDL_EVENT_TEXT_EDITING events) in the specified window. Please use this
+ * function paired with SDL_StopTextInput().
+ *
+ * Text input events are not received by default.
+ *
+ * On some platforms using this function shows the screen keyboard and/or
+ * activates an IME, which can prevent some key press events from being passed
+ * through.
+ *
+ * These are the supported properties:
+ *
+ * - `SDL_PROP_TEXTINPUT_TYPE_NUMBER` - an SDL_TextInputType value that
+ *   describes text being input, defaults to SDL_TEXTINPUT_TYPE_TEXT.
+ * - `SDL_PROP_TEXTINPUT_CAPITALIZATION_NUMBER` - an SDL_Capitalization value
+ *   that describes how text should be capitalized, defaults to
+ *   SDL_CAPITALIZE_SENTENCES for normal text entry, SDL_CAPITALIZE_WORDS for
+ *   SDL_TEXTINPUT_TYPE_TEXT_NAME, and SDL_CAPITALIZE_NONE for e-mail
+ *   addresses, usernames, and passwords.
+ * - `SDL_PROP_TEXTINPUT_AUTOCORRECT_BOOLEAN` - true to enable auto completion
+ *   and auto correction, defaults to true.
+ * - `SDL_PROP_TEXTINPUT_MULTILINE_BOOLEAN` - true if multiple lines of text
+ *   are allowed. This defaults to true if SDL_HINT_RETURN_KEY_HIDES_IME is
+ *   "0" or is not set, and defaults to false if SDL_HINT_RETURN_KEY_HIDES_IME
+ *   is "1".
+ *
+ * On Android you can directly specify the input type:
+ *
+ * - `SDL_PROP_TEXTINPUT_ANDROID_INPUTTYPE_NUMBER` - the text input type to
+ *   use, overriding other properties. This is documented at
+ *   https://developer.android.com/reference/android/text/InputType
+ *
+ * \param window the window to enable text input.
+ * \param props the properties to use.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetTextInputArea
+ * \sa SDL_StartTextInput
+ * \sa SDL_StopTextInput
+ * \sa SDL_TextInputActive
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_StartTextInputWithProperties(SDL_Window *window, SDL_PropertiesID props);
+
+#define SDL_PROP_TEXTINPUT_TYPE_NUMBER                  "SDL.textinput.type"
+#define SDL_PROP_TEXTINPUT_CAPITALIZATION_NUMBER        "SDL.textinput.capitalization"
+#define SDL_PROP_TEXTINPUT_AUTOCORRECT_BOOLEAN          "SDL.textinput.autocorrect"
+#define SDL_PROP_TEXTINPUT_MULTILINE_BOOLEAN            "SDL.textinput.multiline"
+#define SDL_PROP_TEXTINPUT_ANDROID_INPUTTYPE_NUMBER     "SDL.textinput.android.inputtype"
+
+/**
+ * Check whether or not Unicode text input events are enabled for a window.
+ *
+ * \param window the window to check.
+ * \returns true if text input events are enabled else false.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_StartTextInput
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_TextInputActive(SDL_Window *window);
+
+/**
+ * Stop receiving any text input events in a window.
+ *
+ * If SDL_StartTextInput() showed the screen keyboard, this function will hide
+ * it.
+ *
+ * \param window the window to disable text input.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_StartTextInput
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_StopTextInput(SDL_Window *window);
+
+/**
+ * Dismiss the composition window/IME without disabling the subsystem.
+ *
+ * \param window the window to affect.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_StartTextInput
+ * \sa SDL_StopTextInput
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_ClearComposition(SDL_Window *window);
+
+/**
+ * Set the area used to type Unicode text input.
+ *
+ * Native input methods may place a window with word suggestions near the
+ * cursor, without covering the text being entered.
+ *
+ * \param window the window for which to set the text input area.
+ * \param rect the SDL_Rect representing the text input area, in window
+ *             coordinates, or NULL to clear it.
+ * \param cursor the offset of the current cursor location relative to
+ *               `rect->x`, in window coordinates.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetTextInputArea
+ * \sa SDL_StartTextInput
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetTextInputArea(SDL_Window *window, const SDL_Rect *rect, int cursor);
+
+/**
+ * Get the area used to type Unicode text input.
+ *
+ * This returns the values previously set by SDL_SetTextInputArea().
+ *
+ * \param window the window for which to query the text input area.
+ * \param rect a pointer to an SDL_Rect filled in with the text input area,
+ *             may be NULL.
+ * \param cursor a pointer to the offset of the current cursor location
+ *               relative to `rect->x`, may be NULL.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetTextInputArea
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_GetTextInputArea(SDL_Window *window, SDL_Rect *rect, int *cursor);
+
+/**
+ * Check whether the platform has screen keyboard support.
+ *
+ * \returns true if the platform has some screen keyboard support or false if
+ *          not.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_StartTextInput
+ * \sa SDL_ScreenKeyboardShown
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_HasScreenKeyboardSupport(void);
+
+/**
+ * Check whether the screen keyboard is shown for given window.
+ *
+ * \param window the window for which screen keyboard should be queried.
+ * \returns true if screen keyboard is shown or false if not.
+ *
+ * \threadsafety This function should only be called on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_HasScreenKeyboardSupport
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_ScreenKeyboardShown(SDL_Window *window);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_keyboard_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_keycode.h

@@ -0,0 +1,345 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryKeycode
+ *
+ * Defines constants which identify keyboard keys and modifiers.
+ *
+ * Please refer to the Best Keyboard Practices document for details on what
+ * this information means and how best to use it.
+ *
+ * https://wiki.libsdl.org/SDL3/BestKeyboardPractices
+ */
+
+#ifndef SDL_keycode_h_
+#define SDL_keycode_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_scancode.h>
+
+/**
+ * The SDL virtual key representation.
+ *
+ * Values of this type are used to represent keyboard keys using the current
+ * layout of the keyboard. These values include Unicode values representing
+ * the unmodified character that would be generated by pressing the key, or an
+ * `SDLK_*` constant for those keys that do not generate characters.
+ *
+ * A special exception is the number keys at the top of the keyboard which map
+ * to SDLK_0...SDLK_9 on AZERTY layouts.
+ *
+ * Keys with the `SDLK_EXTENDED_MASK` bit set do not map to a scancode or
+ * unicode code point.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_HINT_KEYCODE_OPTIONS
+ */
+typedef Uint32 SDL_Keycode;
+
+#define SDLK_EXTENDED_MASK          (1u << 29)
+#define SDLK_SCANCODE_MASK          (1u << 30)
+#define SDL_SCANCODE_TO_KEYCODE(X)  (X | SDLK_SCANCODE_MASK)
+#define SDLK_UNKNOWN                0x00000000u /**< 0 */
+#define SDLK_RETURN                 0x0000000du /**< '\r' */
+#define SDLK_ESCAPE                 0x0000001bu /**< '\x1B' */
+#define SDLK_BACKSPACE              0x00000008u /**< '\b' */
+#define SDLK_TAB                    0x00000009u /**< '\t' */
+#define SDLK_SPACE                  0x00000020u /**< ' ' */
+#define SDLK_EXCLAIM                0x00000021u /**< '!' */
+#define SDLK_DBLAPOSTROPHE          0x00000022u /**< '"' */
+#define SDLK_HASH                   0x00000023u /**< '#' */
+#define SDLK_DOLLAR                 0x00000024u /**< '$' */
+#define SDLK_PERCENT                0x00000025u /**< '%' */
+#define SDLK_AMPERSAND              0x00000026u /**< '&' */
+#define SDLK_APOSTROPHE             0x00000027u /**< '\'' */
+#define SDLK_LEFTPAREN              0x00000028u /**< '(' */
+#define SDLK_RIGHTPAREN             0x00000029u /**< ')' */
+#define SDLK_ASTERISK               0x0000002au /**< '*' */
+#define SDLK_PLUS                   0x0000002bu /**< '+' */
+#define SDLK_COMMA                  0x0000002cu /**< ',' */
+#define SDLK_MINUS                  0x0000002du /**< '-' */
+#define SDLK_PERIOD                 0x0000002eu /**< '.' */
+#define SDLK_SLASH                  0x0000002fu /**< '/' */
+#define SDLK_0                      0x00000030u /**< '0' */
+#define SDLK_1                      0x00000031u /**< '1' */
+#define SDLK_2                      0x00000032u /**< '2' */
+#define SDLK_3                      0x00000033u /**< '3' */
+#define SDLK_4                      0x00000034u /**< '4' */
+#define SDLK_5                      0x00000035u /**< '5' */
+#define SDLK_6                      0x00000036u /**< '6' */
+#define SDLK_7                      0x00000037u /**< '7' */
+#define SDLK_8                      0x00000038u /**< '8' */
+#define SDLK_9                      0x00000039u /**< '9' */
+#define SDLK_COLON                  0x0000003au /**< ':' */
+#define SDLK_SEMICOLON              0x0000003bu /**< ';' */
+#define SDLK_LESS                   0x0000003cu /**< '<' */
+#define SDLK_EQUALS                 0x0000003du /**< '=' */
+#define SDLK_GREATER                0x0000003eu /**< '>' */
+#define SDLK_QUESTION               0x0000003fu /**< '?' */
+#define SDLK_AT                     0x00000040u /**< '@' */
+#define SDLK_LEFTBRACKET            0x0000005bu /**< '[' */
+#define SDLK_BACKSLASH              0x0000005cu /**< '\\' */
+#define SDLK_RIGHTBRACKET           0x0000005du /**< ']' */
+#define SDLK_CARET                  0x0000005eu /**< '^' */
+#define SDLK_UNDERSCORE             0x0000005fu /**< '_' */
+#define SDLK_GRAVE                  0x00000060u /**< '`' */
+#define SDLK_A                      0x00000061u /**< 'a' */
+#define SDLK_B                      0x00000062u /**< 'b' */
+#define SDLK_C                      0x00000063u /**< 'c' */
+#define SDLK_D                      0x00000064u /**< 'd' */
+#define SDLK_E                      0x00000065u /**< 'e' */
+#define SDLK_F                      0x00000066u /**< 'f' */
+#define SDLK_G                      0x00000067u /**< 'g' */
+#define SDLK_H                      0x00000068u /**< 'h' */
+#define SDLK_I                      0x00000069u /**< 'i' */
+#define SDLK_J                      0x0000006au /**< 'j' */
+#define SDLK_K                      0x0000006bu /**< 'k' */
+#define SDLK_L                      0x0000006cu /**< 'l' */
+#define SDLK_M                      0x0000006du /**< 'm' */
+#define SDLK_N                      0x0000006eu /**< 'n' */
+#define SDLK_O                      0x0000006fu /**< 'o' */
+#define SDLK_P                      0x00000070u /**< 'p' */
+#define SDLK_Q                      0x00000071u /**< 'q' */
+#define SDLK_R                      0x00000072u /**< 'r' */
+#define SDLK_S                      0x00000073u /**< 's' */
+#define SDLK_T                      0x00000074u /**< 't' */
+#define SDLK_U                      0x00000075u /**< 'u' */
+#define SDLK_V                      0x00000076u /**< 'v' */
+#define SDLK_W                      0x00000077u /**< 'w' */
+#define SDLK_X                      0x00000078u /**< 'x' */
+#define SDLK_Y                      0x00000079u /**< 'y' */
+#define SDLK_Z                      0x0000007au /**< 'z' */
+#define SDLK_LEFTBRACE              0x0000007bu /**< '{' */
+#define SDLK_PIPE                   0x0000007cu /**< '|' */
+#define SDLK_RIGHTBRACE             0x0000007du /**< '}' */
+#define SDLK_TILDE                  0x0000007eu /**< '~' */
+#define SDLK_DELETE                 0x0000007fu /**< '\x7F' */
+#define SDLK_PLUSMINUS              0x000000b1u /**< '\xB1' */
+#define SDLK_CAPSLOCK               0x40000039u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CAPSLOCK) */
+#define SDLK_F1                     0x4000003au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F1) */
+#define SDLK_F2                     0x4000003bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F2) */
+#define SDLK_F3                     0x4000003cu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F3) */
+#define SDLK_F4                     0x4000003du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F4) */
+#define SDLK_F5                     0x4000003eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F5) */
+#define SDLK_F6                     0x4000003fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F6) */
+#define SDLK_F7                     0x40000040u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F7) */
+#define SDLK_F8                     0x40000041u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F8) */
+#define SDLK_F9                     0x40000042u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F9) */
+#define SDLK_F10                    0x40000043u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F10) */
+#define SDLK_F11                    0x40000044u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F11) */
+#define SDLK_F12                    0x40000045u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F12) */
+#define SDLK_PRINTSCREEN            0x40000046u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PRINTSCREEN) */
+#define SDLK_SCROLLLOCK             0x40000047u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SCROLLLOCK) */
+#define SDLK_PAUSE                  0x40000048u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PAUSE) */
+#define SDLK_INSERT                 0x40000049u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_INSERT) */
+#define SDLK_HOME                   0x4000004au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_HOME) */
+#define SDLK_PAGEUP                 0x4000004bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PAGEUP) */
+#define SDLK_END                    0x4000004du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_END) */
+#define SDLK_PAGEDOWN               0x4000004eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PAGEDOWN) */
+#define SDLK_RIGHT                  0x4000004fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RIGHT) */
+#define SDLK_LEFT                   0x40000050u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LEFT) */
+#define SDLK_DOWN                   0x40000051u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_DOWN) */
+#define SDLK_UP                     0x40000052u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_UP) */
+#define SDLK_NUMLOCKCLEAR           0x40000053u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_NUMLOCKCLEAR) */
+#define SDLK_KP_DIVIDE              0x40000054u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DIVIDE) */
+#define SDLK_KP_MULTIPLY            0x40000055u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MULTIPLY) */
+#define SDLK_KP_MINUS               0x40000056u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MINUS) */
+#define SDLK_KP_PLUS                0x40000057u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PLUS) */
+#define SDLK_KP_ENTER               0x40000058u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_ENTER) */
+#define SDLK_KP_1                   0x40000059u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_1) */
+#define SDLK_KP_2                   0x4000005au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_2) */
+#define SDLK_KP_3                   0x4000005bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_3) */
+#define SDLK_KP_4                   0x4000005cu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_4) */
+#define SDLK_KP_5                   0x4000005du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_5) */
+#define SDLK_KP_6                   0x4000005eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_6) */
+#define SDLK_KP_7                   0x4000005fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_7) */
+#define SDLK_KP_8                   0x40000060u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_8) */
+#define SDLK_KP_9                   0x40000061u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_9) */
+#define SDLK_KP_0                   0x40000062u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_0) */
+#define SDLK_KP_PERIOD              0x40000063u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PERIOD) */
+#define SDLK_APPLICATION            0x40000065u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_APPLICATION) */
+#define SDLK_POWER                  0x40000066u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_POWER) */
+#define SDLK_KP_EQUALS              0x40000067u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_EQUALS) */
+#define SDLK_F13                    0x40000068u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F13) */
+#define SDLK_F14                    0x40000069u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F14) */
+#define SDLK_F15                    0x4000006au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F15) */
+#define SDLK_F16                    0x4000006bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F16) */
+#define SDLK_F17                    0x4000006cu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F17) */
+#define SDLK_F18                    0x4000006du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F18) */
+#define SDLK_F19                    0x4000006eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F19) */
+#define SDLK_F20                    0x4000006fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F20) */
+#define SDLK_F21                    0x40000070u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F21) */
+#define SDLK_F22                    0x40000071u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F22) */
+#define SDLK_F23                    0x40000072u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F23) */
+#define SDLK_F24                    0x40000073u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_F24) */
+#define SDLK_EXECUTE                0x40000074u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_EXECUTE) */
+#define SDLK_HELP                   0x40000075u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_HELP) */
+#define SDLK_MENU                   0x40000076u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MENU) */
+#define SDLK_SELECT                 0x40000077u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SELECT) */
+#define SDLK_STOP                   0x40000078u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_STOP) */
+#define SDLK_AGAIN                  0x40000079u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AGAIN) */
+#define SDLK_UNDO                   0x4000007au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_UNDO) */
+#define SDLK_CUT                    0x4000007bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CUT) */
+#define SDLK_COPY                   0x4000007cu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_COPY) */
+#define SDLK_PASTE                  0x4000007du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PASTE) */
+#define SDLK_FIND                   0x4000007eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_FIND) */
+#define SDLK_MUTE                   0x4000007fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MUTE) */
+#define SDLK_VOLUMEUP               0x40000080u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_VOLUMEUP) */
+#define SDLK_VOLUMEDOWN             0x40000081u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_VOLUMEDOWN) */
+#define SDLK_KP_COMMA               0x40000085u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_COMMA) */
+#define SDLK_KP_EQUALSAS400         0x40000086u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_EQUALSAS400) */
+#define SDLK_ALTERASE               0x40000099u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_ALTERASE) */
+#define SDLK_SYSREQ                 0x4000009au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SYSREQ) */
+#define SDLK_CANCEL                 0x4000009bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CANCEL) */
+#define SDLK_CLEAR                  0x4000009cu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CLEAR) */
+#define SDLK_PRIOR                  0x4000009du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_PRIOR) */
+#define SDLK_RETURN2                0x4000009eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RETURN2) */
+#define SDLK_SEPARATOR              0x4000009fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SEPARATOR) */
+#define SDLK_OUT                    0x400000a0u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_OUT) */
+#define SDLK_OPER                   0x400000a1u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_OPER) */
+#define SDLK_CLEARAGAIN             0x400000a2u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CLEARAGAIN) */
+#define SDLK_CRSEL                  0x400000a3u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CRSEL) */
+#define SDLK_EXSEL                  0x400000a4u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_EXSEL) */
+#define SDLK_KP_00                  0x400000b0u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_00) */
+#define SDLK_KP_000                 0x400000b1u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_000) */
+#define SDLK_THOUSANDSSEPARATOR     0x400000b2u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_THOUSANDSSEPARATOR) */
+#define SDLK_DECIMALSEPARATOR       0x400000b3u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_DECIMALSEPARATOR) */
+#define SDLK_CURRENCYUNIT           0x400000b4u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CURRENCYUNIT) */
+#define SDLK_CURRENCYSUBUNIT        0x400000b5u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CURRENCYSUBUNIT) */
+#define SDLK_KP_LEFTPAREN           0x400000b6u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_LEFTPAREN) */
+#define SDLK_KP_RIGHTPAREN          0x400000b7u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_RIGHTPAREN) */
+#define SDLK_KP_LEFTBRACE           0x400000b8u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_LEFTBRACE) */
+#define SDLK_KP_RIGHTBRACE          0x400000b9u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_RIGHTBRACE) */
+#define SDLK_KP_TAB                 0x400000bau /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_TAB) */
+#define SDLK_KP_BACKSPACE           0x400000bbu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_BACKSPACE) */
+#define SDLK_KP_A                   0x400000bcu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_A) */
+#define SDLK_KP_B                   0x400000bdu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_B) */
+#define SDLK_KP_C                   0x400000beu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_C) */
+#define SDLK_KP_D                   0x400000bfu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_D) */
+#define SDLK_KP_E                   0x400000c0u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_E) */
+#define SDLK_KP_F                   0x400000c1u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_F) */
+#define SDLK_KP_XOR                 0x400000c2u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_XOR) */
+#define SDLK_KP_POWER               0x400000c3u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_POWER) */
+#define SDLK_KP_PERCENT             0x400000c4u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PERCENT) */
+#define SDLK_KP_LESS                0x400000c5u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_LESS) */
+#define SDLK_KP_GREATER             0x400000c6u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_GREATER) */
+#define SDLK_KP_AMPERSAND           0x400000c7u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_AMPERSAND) */
+#define SDLK_KP_DBLAMPERSAND        0x400000c8u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DBLAMPERSAND) */
+#define SDLK_KP_VERTICALBAR         0x400000c9u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_VERTICALBAR) */
+#define SDLK_KP_DBLVERTICALBAR      0x400000cau /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DBLVERTICALBAR) */
+#define SDLK_KP_COLON               0x400000cbu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_COLON) */
+#define SDLK_KP_HASH                0x400000ccu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_HASH) */
+#define SDLK_KP_SPACE               0x400000cdu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_SPACE) */
+#define SDLK_KP_AT                  0x400000ceu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_AT) */
+#define SDLK_KP_EXCLAM              0x400000cfu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_EXCLAM) */
+#define SDLK_KP_MEMSTORE            0x400000d0u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMSTORE) */
+#define SDLK_KP_MEMRECALL           0x400000d1u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMRECALL) */
+#define SDLK_KP_MEMCLEAR            0x400000d2u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMCLEAR) */
+#define SDLK_KP_MEMADD              0x400000d3u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMADD) */
+#define SDLK_KP_MEMSUBTRACT         0x400000d4u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMSUBTRACT) */
+#define SDLK_KP_MEMMULTIPLY         0x400000d5u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMMULTIPLY) */
+#define SDLK_KP_MEMDIVIDE           0x400000d6u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_MEMDIVIDE) */
+#define SDLK_KP_PLUSMINUS           0x400000d7u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_PLUSMINUS) */
+#define SDLK_KP_CLEAR               0x400000d8u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_CLEAR) */
+#define SDLK_KP_CLEARENTRY          0x400000d9u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_CLEARENTRY) */
+#define SDLK_KP_BINARY              0x400000dau /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_BINARY) */
+#define SDLK_KP_OCTAL               0x400000dbu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_OCTAL) */
+#define SDLK_KP_DECIMAL             0x400000dcu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_DECIMAL) */
+#define SDLK_KP_HEXADECIMAL         0x400000ddu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_KP_HEXADECIMAL) */
+#define SDLK_LCTRL                  0x400000e0u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LCTRL) */
+#define SDLK_LSHIFT                 0x400000e1u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LSHIFT) */
+#define SDLK_LALT                   0x400000e2u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LALT) */
+#define SDLK_LGUI                   0x400000e3u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_LGUI) */
+#define SDLK_RCTRL                  0x400000e4u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RCTRL) */
+#define SDLK_RSHIFT                 0x400000e5u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RSHIFT) */
+#define SDLK_RALT                   0x400000e6u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RALT) */
+#define SDLK_RGUI                   0x400000e7u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_RGUI) */
+#define SDLK_MODE                   0x40000101u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MODE) */
+#define SDLK_SLEEP                  0x40000102u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SLEEP) */
+#define SDLK_WAKE                   0x40000103u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_WAKE) */
+#define SDLK_CHANNEL_INCREMENT      0x40000104u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CHANNEL_INCREMENT) */
+#define SDLK_CHANNEL_DECREMENT      0x40000105u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CHANNEL_DECREMENT) */
+#define SDLK_MEDIA_PLAY             0x40000106u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_PLAY) */
+#define SDLK_MEDIA_PAUSE            0x40000107u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_PAUSE) */
+#define SDLK_MEDIA_RECORD           0x40000108u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_RECORD) */
+#define SDLK_MEDIA_FAST_FORWARD     0x40000109u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_FAST_FORWARD) */
+#define SDLK_MEDIA_REWIND           0x4000010au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_REWIND) */
+#define SDLK_MEDIA_NEXT_TRACK       0x4000010bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_NEXT_TRACK) */
+#define SDLK_MEDIA_PREVIOUS_TRACK   0x4000010cu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_PREVIOUS_TRACK) */
+#define SDLK_MEDIA_STOP             0x4000010du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_STOP) */
+#define SDLK_MEDIA_EJECT            0x4000010eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_EJECT) */
+#define SDLK_MEDIA_PLAY_PAUSE       0x4000010fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_PLAY_PAUSE) */
+#define SDLK_MEDIA_SELECT           0x40000110u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_MEDIA_SELECT) */
+#define SDLK_AC_NEW                 0x40000111u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_NEW) */
+#define SDLK_AC_OPEN                0x40000112u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_OPEN) */
+#define SDLK_AC_CLOSE               0x40000113u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_CLOSE) */
+#define SDLK_AC_EXIT                0x40000114u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_EXIT) */
+#define SDLK_AC_SAVE                0x40000115u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_SAVE) */
+#define SDLK_AC_PRINT               0x40000116u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_PRINT) */
+#define SDLK_AC_PROPERTIES          0x40000117u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_PROPERTIES) */
+#define SDLK_AC_SEARCH              0x40000118u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_SEARCH) */
+#define SDLK_AC_HOME                0x40000119u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_HOME) */
+#define SDLK_AC_BACK                0x4000011au /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_BACK) */
+#define SDLK_AC_FORWARD             0x4000011bu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_FORWARD) */
+#define SDLK_AC_STOP                0x4000011cu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_STOP) */
+#define SDLK_AC_REFRESH             0x4000011du /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_REFRESH) */
+#define SDLK_AC_BOOKMARKS           0x4000011eu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_AC_BOOKMARKS) */
+#define SDLK_SOFTLEFT               0x4000011fu /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SOFTLEFT) */
+#define SDLK_SOFTRIGHT              0x40000120u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_SOFTRIGHT) */
+#define SDLK_CALL                   0x40000121u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_CALL) */
+#define SDLK_ENDCALL                0x40000122u /**< SDL_SCANCODE_TO_KEYCODE(SDL_SCANCODE_ENDCALL) */
+#define SDLK_LEFT_TAB               0x20000001u /**< Extended key Left Tab */
+#define SDLK_LEVEL5_SHIFT           0x20000002u /**< Extended key Level 5 Shift */
+#define SDLK_MULTI_KEY_COMPOSE      0x20000003u /**< Extended key Multi-key Compose */
+#define SDLK_LMETA                  0x20000004u /**< Extended key Left Meta */
+#define SDLK_RMETA                  0x20000005u /**< Extended key Right Meta */
+#define SDLK_LHYPER                 0x20000006u /**< Extended key Left Hyper */
+#define SDLK_RHYPER                 0x20000007u /**< Extended key Right Hyper */
+
+/**
+ * Valid key modifiers (possibly OR'd together).
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef Uint16 SDL_Keymod;
+
+#define SDL_KMOD_NONE   0x0000u /**< no modifier is applicable. */
+#define SDL_KMOD_LSHIFT 0x0001u /**< the left Shift key is down. */
+#define SDL_KMOD_RSHIFT 0x0002u /**< the right Shift key is down. */
+#define SDL_KMOD_LEVEL5 0x0004u /**< the Level 5 Shift key is down. */
+#define SDL_KMOD_LCTRL  0x0040u /**< the left Ctrl (Control) key is down. */
+#define SDL_KMOD_RCTRL  0x0080u /**< the right Ctrl (Control) key is down. */
+#define SDL_KMOD_LALT   0x0100u /**< the left Alt key is down. */
+#define SDL_KMOD_RALT   0x0200u /**< the right Alt key is down. */
+#define SDL_KMOD_LGUI   0x0400u /**< the left GUI key (often the Windows key) is down. */
+#define SDL_KMOD_RGUI   0x0800u /**< the right GUI key (often the Windows key) is down. */
+#define SDL_KMOD_NUM    0x1000u /**< the Num Lock key (may be located on an extended keypad) is down. */
+#define SDL_KMOD_CAPS   0x2000u /**< the Caps Lock key is down. */
+#define SDL_KMOD_MODE   0x4000u /**< the !AltGr key is down. */
+#define SDL_KMOD_SCROLL 0x8000u /**< the Scroll Lock key is down. */
+#define SDL_KMOD_CTRL   (SDL_KMOD_LCTRL | SDL_KMOD_RCTRL)   /**< Any Ctrl key is down. */
+#define SDL_KMOD_SHIFT  (SDL_KMOD_LSHIFT | SDL_KMOD_RSHIFT) /**< Any Shift key is down. */
+#define SDL_KMOD_ALT    (SDL_KMOD_LALT | SDL_KMOD_RALT)     /**< Any Alt key is down. */
+#define SDL_KMOD_GUI    (SDL_KMOD_LGUI | SDL_KMOD_RGUI)     /**< Any GUI key is down. */
+
+#endif /* SDL_keycode_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_loadso.h

@@ -0,0 +1,145 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: SharedObject */
+
+/**
+ * # CategorySharedObject
+ *
+ * System-dependent library loading routines.
+ *
+ * Shared objects are code that is programmatically loadable at runtime.
+ * Windows calls these "DLLs", Linux calls them "shared libraries", etc.
+ *
+ * To use them, build such a library, then call SDL_LoadObject() on it. Once
+ * loaded, you can use SDL_LoadFunction() on that object to find the address
+ * of its exported symbols. When done with the object, call SDL_UnloadObject()
+ * to dispose of it.
+ *
+ * Some things to keep in mind:
+ *
+ * - These functions only work on C function names. Other languages may have
+ *   name mangling and intrinsic language support that varies from compiler to
+ *   compiler.
+ * - Make sure you declare your function pointers with the same calling
+ *   convention as the actual library function. Your code will crash
+ *   mysteriously if you do not do this.
+ * - Avoid namespace collisions. If you load a symbol from the library, it is
+ *   not defined whether or not it goes into the global symbol namespace for
+ *   the application. If it does and it conflicts with symbols in your code or
+ *   other shared libraries, you will not get the results you expect. :)
+ * - Once a library is unloaded, all pointers into it obtained through
+ *   SDL_LoadFunction() become invalid, even if the library is later reloaded.
+ *   Don't unload a library if you plan to use these pointers in the future.
+ *   Notably: beware of giving one of these pointers to atexit(), since it may
+ *   call that pointer after the library unloads.
+ */
+
+#ifndef SDL_loadso_h_
+#define SDL_loadso_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * An opaque datatype that represents a loaded shared object.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ *
+ * \sa SDL_LoadObject
+ * \sa SDL_LoadFunction
+ * \sa SDL_UnloadObject
+ */
+typedef struct SDL_SharedObject SDL_SharedObject;
+
+/**
+ * Dynamically load a shared object.
+ *
+ * \param sofile a system-dependent name of the object file.
+ * \returns an opaque pointer to the object handle or NULL on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_LoadFunction
+ * \sa SDL_UnloadObject
+ */
+extern SDL_DECLSPEC SDL_SharedObject * SDLCALL SDL_LoadObject(const char *sofile);
+
+/**
+ * Look up the address of the named function in a shared object.
+ *
+ * This function pointer is no longer valid after calling SDL_UnloadObject().
+ *
+ * This function can only look up C function names. Other languages may have
+ * name mangling and intrinsic language support that varies from compiler to
+ * compiler.
+ *
+ * Make sure you declare your function pointers with the same calling
+ * convention as the actual library function. Your code will crash
+ * mysteriously if you do not do this.
+ *
+ * If the requested function doesn't exist, NULL is returned.
+ *
+ * \param handle a valid shared object handle returned by SDL_LoadObject().
+ * \param name the name of the function to look up.
+ * \returns a pointer to the function or NULL on failure; call SDL_GetError()
+ *          for more information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_LoadObject
+ */
+extern SDL_DECLSPEC SDL_FunctionPointer SDLCALL SDL_LoadFunction(SDL_SharedObject *handle, const char *name);
+
+/**
+ * Unload a shared object from memory.
+ *
+ * Note that any pointers from this object looked up through
+ * SDL_LoadFunction() will no longer be valid.
+ *
+ * \param handle a valid shared object handle returned by SDL_LoadObject().
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_LoadObject
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_UnloadObject(SDL_SharedObject *handle);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_loadso_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_locale.h

@@ -0,0 +1,117 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryLocale
+ *
+ * SDL locale services.
+ *
+ * This provides a way to get a list of preferred locales (language plus
+ * country) for the user. There is exactly one function:
+ * SDL_GetPreferredLocales(), which handles all the heavy lifting, and offers
+ * documentation on all the strange ways humans might have configured their
+ * language settings.
+ */
+
+#ifndef SDL_locale_h
+#define SDL_locale_h
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+/* *INDENT-OFF* */
+extern "C" {
+/* *INDENT-ON* */
+#endif
+
+/**
+ * A struct to provide locale data.
+ *
+ * Locale data is split into a spoken language, like English, and an optional
+ * country, like Canada. The language will be in ISO-639 format (so English
+ * would be "en"), and the country, if not NULL, will be an ISO-3166 country
+ * code (so Canada would be "CA").
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetPreferredLocales
+ */
+typedef struct SDL_Locale
+{
+    const char *language;  /**< A language name, like "en" for English. */
+    const char *country;  /**< A country, like "US" for America. Can be NULL. */
+} SDL_Locale;
+
+/**
+ * Report the user's preferred locale.
+ *
+ * Returned language strings are in the format xx, where 'xx' is an ISO-639
+ * language specifier (such as "en" for English, "de" for German, etc).
+ * Country strings are in the format YY, where "YY" is an ISO-3166 country
+ * code (such as "US" for the United States, "CA" for Canada, etc). Country
+ * might be NULL if there's no specific guidance on them (so you might get {
+ * "en", "US" } for American English, but { "en", NULL } means "English
+ * language, generically"). Language strings are never NULL, except to
+ * terminate the array.
+ *
+ * Please note that not all of these strings are 2 characters; some are three
+ * or more.
+ *
+ * The returned list of locales are in the order of the user's preference. For
+ * example, a German citizen that is fluent in US English and knows enough
+ * Japanese to navigate around Tokyo might have a list like: { "de", "en_US",
+ * "jp", NULL }. Someone from England might prefer British English (where
+ * "color" is spelled "colour", etc), but will settle for anything like it: {
+ * "en_GB", "en", NULL }.
+ *
+ * This function returns NULL on error, including when the platform does not
+ * supply this information at all.
+ *
+ * This might be a "slow" call that has to query the operating system. It's
+ * best to ask for this once and save the results. However, this list can
+ * change, usually because the user has changed a system preference outside of
+ * your program; SDL will send an SDL_EVENT_LOCALE_CHANGED event in this case,
+ * if possible, and you can call this function again to get an updated copy of
+ * preferred locales.
+ *
+ * \param count a pointer filled in with the number of locales returned, may
+ *              be NULL.
+ * \returns a NULL terminated array of locale pointers, or NULL on failure;
+ *          call SDL_GetError() for more information. This is a single
+ *          allocation that should be freed with SDL_free() when it is no
+ *          longer needed.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC SDL_Locale ** SDLCALL SDL_GetPreferredLocales(int *count);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+/* *INDENT-OFF* */
+}
+/* *INDENT-ON* */
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_locale_h */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_log.h

@@ -0,0 +1,540 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryLog
+ *
+ * Simple log messages with priorities and categories. A message's
+ * SDL_LogPriority signifies how important the message is. A message's
+ * SDL_LogCategory signifies from what domain it belongs to. Every category
+ * has a minimum priority specified: when a message belongs to that category,
+ * it will only be sent out if it has that minimum priority or higher.
+ *
+ * SDL's own logs are sent below the default priority threshold, so they are
+ * quiet by default.
+ *
+ * You can change the log verbosity programmatically using
+ * SDL_SetLogPriority() or with SDL_SetHint(SDL_HINT_LOGGING, ...), or with
+ * the "SDL_LOGGING" environment variable. This variable is a comma separated
+ * set of category=level tokens that define the default logging levels for SDL
+ * applications.
+ *
+ * The category can be a numeric category, one of "app", "error", "assert",
+ * "system", "audio", "video", "render", "input", "test", or `*` for any
+ * unspecified category.
+ *
+ * The level can be a numeric level, one of "trace", "verbose", "debug",
+ * "info", "warn", "error", "critical", or "quiet" to disable that category.
+ *
+ * You can omit the category if you want to set the logging level for all
+ * categories.
+ *
+ * If this hint isn't set, the default log levels are equivalent to:
+ *
+ * `app=info,assert=warn,test=verbose,*=error`
+ *
+ * Here's where the messages go on different platforms:
+ *
+ * - Windows: debug output stream
+ * - Android: log output
+ * - Others: standard error output (stderr)
+ *
+ * You don't need to have a newline (`\n`) on the end of messages, the
+ * functions will do that for you. For consistent behavior cross-platform, you
+ * shouldn't have any newlines in messages, such as to log multiple lines in
+ * one call; unusual platform-specific behavior can be observed in such usage.
+ * Do one log call per line instead, with no newlines in messages.
+ *
+ * Each log call is atomic, so you won't see log messages cut off one another
+ * when logging from multiple threads.
+ */
+
+#ifndef SDL_log_h_
+#define SDL_log_h_
+
+#include <SDL3/SDL_stdinc.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * The predefined log categories
+ *
+ * By default the application and gpu categories are enabled at the INFO
+ * level, the assert category is enabled at the WARN level, test is enabled at
+ * the VERBOSE level and all other categories are enabled at the ERROR level.
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_LogCategory
+{
+    SDL_LOG_CATEGORY_APPLICATION,
+    SDL_LOG_CATEGORY_ERROR,
+    SDL_LOG_CATEGORY_ASSERT,
+    SDL_LOG_CATEGORY_SYSTEM,
+    SDL_LOG_CATEGORY_AUDIO,
+    SDL_LOG_CATEGORY_VIDEO,
+    SDL_LOG_CATEGORY_RENDER,
+    SDL_LOG_CATEGORY_INPUT,
+    SDL_LOG_CATEGORY_TEST,
+    SDL_LOG_CATEGORY_GPU,
+
+    /* Reserved for future SDL library use */
+    SDL_LOG_CATEGORY_RESERVED2,
+    SDL_LOG_CATEGORY_RESERVED3,
+    SDL_LOG_CATEGORY_RESERVED4,
+    SDL_LOG_CATEGORY_RESERVED5,
+    SDL_LOG_CATEGORY_RESERVED6,
+    SDL_LOG_CATEGORY_RESERVED7,
+    SDL_LOG_CATEGORY_RESERVED8,
+    SDL_LOG_CATEGORY_RESERVED9,
+    SDL_LOG_CATEGORY_RESERVED10,
+
+    /* Beyond this point is reserved for application use, e.g.
+       enum {
+           MYAPP_CATEGORY_AWESOME1 = SDL_LOG_CATEGORY_CUSTOM,
+           MYAPP_CATEGORY_AWESOME2,
+           MYAPP_CATEGORY_AWESOME3,
+           ...
+       };
+     */
+    SDL_LOG_CATEGORY_CUSTOM
+} SDL_LogCategory;
+
+/**
+ * The predefined log priorities
+ *
+ * \since This enum is available since SDL 3.2.0.
+ */
+typedef enum SDL_LogPriority
+{
+    SDL_LOG_PRIORITY_INVALID,
+    SDL_LOG_PRIORITY_TRACE,
+    SDL_LOG_PRIORITY_VERBOSE,
+    SDL_LOG_PRIORITY_DEBUG,
+    SDL_LOG_PRIORITY_INFO,
+    SDL_LOG_PRIORITY_WARN,
+    SDL_LOG_PRIORITY_ERROR,
+    SDL_LOG_PRIORITY_CRITICAL,
+    SDL_LOG_PRIORITY_COUNT
+} SDL_LogPriority;
+
+
+/**
+ * Set the priority of all log categories.
+ *
+ * \param priority the SDL_LogPriority to assign.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ResetLogPriorities
+ * \sa SDL_SetLogPriority
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_SetLogPriorities(SDL_LogPriority priority);
+
+/**
+ * Set the priority of a particular log category.
+ *
+ * \param category the category to assign a priority to.
+ * \param priority the SDL_LogPriority to assign.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetLogPriority
+ * \sa SDL_ResetLogPriorities
+ * \sa SDL_SetLogPriorities
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_SetLogPriority(int category, SDL_LogPriority priority);
+
+/**
+ * Get the priority of a particular log category.
+ *
+ * \param category the category to query.
+ * \returns the SDL_LogPriority for the requested category.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetLogPriority
+ */
+extern SDL_DECLSPEC SDL_LogPriority SDLCALL SDL_GetLogPriority(int category);
+
+/**
+ * Reset all priorities to default.
+ *
+ * This is called by SDL_Quit().
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetLogPriorities
+ * \sa SDL_SetLogPriority
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_ResetLogPriorities(void);
+
+/**
+ * Set the text prepended to log messages of a given priority.
+ *
+ * By default SDL_LOG_PRIORITY_INFO and below have no prefix, and
+ * SDL_LOG_PRIORITY_WARN and higher have a prefix showing their priority, e.g.
+ * "WARNING: ".
+ *
+ * This function makes a copy of its string argument, **prefix**, so it is not
+ * necessary to keep the value of **prefix** alive after the call returns.
+ *
+ * \param priority the SDL_LogPriority to modify.
+ * \param prefix the prefix to use for that log priority, or NULL to use no
+ *               prefix.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetLogPriorities
+ * \sa SDL_SetLogPriority
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_SetLogPriorityPrefix(SDL_LogPriority priority, const char *prefix);
+
+/**
+ * Log a message with SDL_LOG_CATEGORY_APPLICATION and SDL_LOG_PRIORITY_INFO.
+ *
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the `fmt` string, if
+ *            any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_Log(SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(1);
+
+/**
+ * Log a message with SDL_LOG_PRIORITY_TRACE.
+ *
+ * \param category the category of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogTrace(int category, SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(2);
+
+/**
+ * Log a message with SDL_LOG_PRIORITY_VERBOSE.
+ *
+ * \param category the category of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogVerbose(int category, SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(2);
+
+/**
+ * Log a message with SDL_LOG_PRIORITY_DEBUG.
+ *
+ * \param category the category of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogDebug(int category, SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(2);
+
+/**
+ * Log a message with SDL_LOG_PRIORITY_INFO.
+ *
+ * \param category the category of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogInfo(int category, SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(2);
+
+/**
+ * Log a message with SDL_LOG_PRIORITY_WARN.
+ *
+ * \param category the category of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogWarn(int category, SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(2);
+
+/**
+ * Log a message with SDL_LOG_PRIORITY_ERROR.
+ *
+ * \param category the category of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogError(int category, SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(2);
+
+/**
+ * Log a message with SDL_LOG_PRIORITY_CRITICAL.
+ *
+ * \param category the category of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogCritical(int category, SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(2);
+
+/**
+ * Log a message with the specified category and priority.
+ *
+ * \param category the category of the message.
+ * \param priority the priority of the message.
+ * \param fmt a printf() style message format string.
+ * \param ... additional parameters matching % tokens in the **fmt** string,
+ *            if any.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessageV
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogMessage(int category,
+                                            SDL_LogPriority priority,
+                                            SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(3);
+
+/**
+ * Log a message with the specified category and priority.
+ *
+ * \param category the category of the message.
+ * \param priority the priority of the message.
+ * \param fmt a printf() style message format string.
+ * \param ap a variable argument list.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Log
+ * \sa SDL_LogCritical
+ * \sa SDL_LogDebug
+ * \sa SDL_LogError
+ * \sa SDL_LogInfo
+ * \sa SDL_LogMessage
+ * \sa SDL_LogTrace
+ * \sa SDL_LogVerbose
+ * \sa SDL_LogWarn
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_LogMessageV(int category,
+                                             SDL_LogPriority priority,
+                                             SDL_PRINTF_FORMAT_STRING const char *fmt, va_list ap) SDL_PRINTF_VARARG_FUNCV(3);
+
+/**
+ * The prototype for the log output callback function.
+ *
+ * This function is called by SDL when there is new text to be logged. A mutex
+ * is held so that this function is never called by more than one thread at
+ * once.
+ *
+ * \param userdata what was passed as `userdata` to
+ *                 SDL_SetLogOutputFunction().
+ * \param category the category of the message.
+ * \param priority the priority of the message.
+ * \param message the message being output.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef void (SDLCALL *SDL_LogOutputFunction)(void *userdata, int category, SDL_LogPriority priority, const char *message);
+
+/**
+ * Get the default log output function.
+ *
+ * \returns the default log output callback.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_SetLogOutputFunction
+ * \sa SDL_GetLogOutputFunction
+ */
+extern SDL_DECLSPEC SDL_LogOutputFunction SDLCALL SDL_GetDefaultLogOutputFunction(void);
+
+/**
+ * Get the current log output function.
+ *
+ * \param callback an SDL_LogOutputFunction filled in with the current log
+ *                 callback.
+ * \param userdata a pointer filled in with the pointer that is passed to
+ *                 `callback`.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetDefaultLogOutputFunction
+ * \sa SDL_SetLogOutputFunction
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_GetLogOutputFunction(SDL_LogOutputFunction *callback, void **userdata);
+
+/**
+ * Replace the default log output function with one of your own.
+ *
+ * \param callback an SDL_LogOutputFunction to call instead of the default.
+ * \param userdata a pointer that is passed to `callback`.
+ *
+ * \threadsafety It is safe to call this function from any thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_GetDefaultLogOutputFunction
+ * \sa SDL_GetLogOutputFunction
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_SetLogOutputFunction(SDL_LogOutputFunction callback, void *userdata);
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_log_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_main.h

@@ -0,0 +1,676 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryMain
+ *
+ * Redefine main() if necessary so that it is called by SDL.
+ *
+ * In order to make this consistent on all platforms, the application's main()
+ * should look like this:
+ *
+ * ```c
+ * #include <SDL3/SDL.h>
+ * #include <SDL3/SDL_main.h>
+ *
+ * int main(int argc, char *argv[])
+ * {
+ * }
+ * ```
+ *
+ * SDL will take care of platform specific details on how it gets called.
+ *
+ * This is also where an app can be configured to use the main callbacks, via
+ * the SDL_MAIN_USE_CALLBACKS macro.
+ *
+ * SDL_main.h is a "single-header library," which is to say that including
+ * this header inserts code into your program, and you should only include it
+ * once in most cases. SDL.h does not include this header automatically.
+ *
+ * For more information, see:
+ *
+ * https://wiki.libsdl.org/SDL3/README-main-functions
+ */
+
+#ifndef SDL_main_h_
+#define SDL_main_h_
+
+#include <SDL3/SDL_platform_defines.h>
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_events.h>
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * Inform SDL that the app is providing an entry point instead of SDL.
+ *
+ * SDL does not define this macro, but will check if it is defined when
+ * including `SDL_main.h`. If defined, SDL will expect the app to provide the
+ * proper entry point for the platform, and all the other magic details
+ * needed, like manually calling SDL_SetMainReady.
+ *
+ * Please see [README-main-functions](README-main-functions), (or
+ * docs/README-main-functions.md in the source tree) for a more detailed
+ * explanation.
+ *
+ * \since This macro is used by the headers since SDL 3.2.0.
+ */
+#define SDL_MAIN_HANDLED 1
+
+/**
+ * Inform SDL to use the main callbacks instead of main.
+ *
+ * SDL does not define this macro, but will check if it is defined when
+ * including `SDL_main.h`. If defined, SDL will expect the app to provide
+ * several functions: SDL_AppInit, SDL_AppEvent, SDL_AppIterate, and
+ * SDL_AppQuit. The app should not provide a `main` function in this case, and
+ * doing so will likely cause the build to fail.
+ *
+ * Please see [README-main-functions](README-main-functions), (or
+ * docs/README-main-functions.md in the source tree) for a more detailed
+ * explanation.
+ *
+ * \since This macro is used by the headers since SDL 3.2.0.
+ *
+ * \sa SDL_AppInit
+ * \sa SDL_AppEvent
+ * \sa SDL_AppIterate
+ * \sa SDL_AppQuit
+ */
+#define SDL_MAIN_USE_CALLBACKS 1
+
+/**
+ * Defined if the target platform offers a special mainline through SDL.
+ *
+ * This won't be defined otherwise. If defined, SDL's headers will redefine
+ * `main` to `SDL_main`.
+ *
+ * This macro is defined by `SDL_main.h`, which is not automatically included
+ * by `SDL.h`.
+ *
+ * Even if available, an app can define SDL_MAIN_HANDLED and provide their
+ * own, if they know what they're doing.
+ *
+ * This macro is used internally by SDL, and apps probably shouldn't rely on it.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_MAIN_AVAILABLE
+
+/**
+ * Defined if the target platform _requires_ a special mainline through SDL.
+ *
+ * This won't be defined otherwise. If defined, SDL's headers will redefine
+ * `main` to `SDL_main`.
+ *
+ * This macro is defined by `SDL_main.h`, which is not automatically included
+ * by `SDL.h`.
+ *
+ * Even if required, an app can define SDL_MAIN_HANDLED and provide their
+ * own, if they know what they're doing.
+ *
+ * This macro is used internally by SDL, and apps probably shouldn't rely on it.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ */
+#define SDL_MAIN_NEEDED
+
+#endif
+
+#if defined(__has_include)
+    #if __has_include("SDL_main_private.h") && __has_include("SDL_main_impl_private.h")
+        #define SDL_PLATFORM_PRIVATE_MAIN
+    #endif
+#endif
+
+#ifndef SDL_MAIN_HANDLED
+    #if defined(SDL_PLATFORM_PRIVATE_MAIN)
+        /* Private platforms may have their own ideas about entry points. */
+        #include "SDL_main_private.h"
+
+    #elif defined(SDL_PLATFORM_WIN32)
+        /* On Windows SDL provides WinMain(), which parses the command line and passes
+           the arguments to your main function.
+
+           If you provide your own WinMain(), you may define SDL_MAIN_HANDLED
+         */
+        #define SDL_MAIN_AVAILABLE
+
+    #elif defined(SDL_PLATFORM_GDK)
+        /* On GDK, SDL provides a main function that initializes the game runtime.
+
+           If you prefer to write your own WinMain-function instead of having SDL
+           provide one that calls your main() function,
+           #define SDL_MAIN_HANDLED before #include'ing SDL_main.h
+           and call the SDL_RunApp function from your entry point.
+        */
+        #define SDL_MAIN_NEEDED
+
+    #elif defined(SDL_PLATFORM_IOS)
+        /* On iOS SDL provides a main function that creates an application delegate
+           and starts the iOS application run loop.
+
+           To use it, just #include SDL_main.h in the source file that contains your
+           main() function.
+
+           See src/video/uikit/SDL_uikitappdelegate.m for more details.
+         */
+        #define SDL_MAIN_NEEDED
+
+    #elif defined(SDL_PLATFORM_ANDROID)
+        /* On Android SDL provides a Java class in SDLActivity.java that is the
+           main activity entry point.
+
+           See docs/README-android.md for more details on extending that class.
+         */
+        #define SDL_MAIN_NEEDED
+
+        /* As this is launched from Java, the real entry point (main() function)
+           is outside of the the binary built from this code.
+           This define makes sure that, unlike on other platforms, SDL_main.h
+           and SDL_main_impl.h export an `SDL_main()` function (to be called
+           from Java), but don't implement a native `int main(int argc, char* argv[])`
+           or similar.
+         */
+        #define SDL_MAIN_EXPORTED
+
+    #elif defined(SDL_PLATFORM_EMSCRIPTEN)
+        /* On Emscripten, SDL provides a main function that converts URL
+           parameters that start with "SDL_" to environment variables, so
+           they can be used as SDL hints, etc.
+
+           This is 100% optional, so if you don't want this to happen, you may
+           define SDL_MAIN_HANDLED
+         */
+        #define SDL_MAIN_AVAILABLE
+
+    #elif defined(SDL_PLATFORM_PSP)
+        /* On PSP SDL provides a main function that sets the module info,
+           activates the GPU and starts the thread required to be able to exit
+           the software.
+
+           If you provide this yourself, you may define SDL_MAIN_HANDLED
+         */
+        #define SDL_MAIN_AVAILABLE
+
+    #elif defined(SDL_PLATFORM_PS2)
+        #define SDL_MAIN_AVAILABLE
+
+        #define SDL_PS2_SKIP_IOP_RESET() \
+           void reset_IOP(); \
+           void reset_IOP() {}
+
+    #elif defined(SDL_PLATFORM_3DS)
+        /*
+          On N3DS, SDL provides a main function that sets up the screens
+          and storage.
+
+          If you provide this yourself, you may define SDL_MAIN_HANDLED
+        */
+        #define SDL_MAIN_AVAILABLE
+
+    #endif
+#endif /* SDL_MAIN_HANDLED */
+
+
+#ifdef SDL_WIKI_DOCUMENTATION_SECTION
+
+/**
+ * A macro to tag a main entry point function as exported.
+ *
+ * Most platforms don't need this, and the macro will be defined to nothing.
+ * Some, like Android, keep the entry points in a shared library and need to
+ * explicitly export the symbols.
+ *
+ * External code rarely needs this, and if it needs something, it's almost
+ * always SDL_DECLSPEC instead.
+ *
+ * \since This macro is available since SDL 3.2.0.
+ *
+ * \sa SDL_DECLSPEC
+ */
+#define SDLMAIN_DECLSPEC
+
+#elif defined(SDL_MAIN_EXPORTED)
+/* We need to export SDL_main so it can be launched from external code,
+   like SDLActivity.java on Android */
+#define SDLMAIN_DECLSPEC    SDL_DECLSPEC
+#else
+/* usually this is empty */
+#define SDLMAIN_DECLSPEC
+#endif /* SDL_MAIN_EXPORTED */
+
+#if defined(SDL_MAIN_NEEDED) || defined(SDL_MAIN_AVAILABLE) || defined(SDL_MAIN_USE_CALLBACKS)
+#define main SDL_main
+#endif
+
+#include <SDL3/SDL_init.h>
+#include <SDL3/SDL_begin_code.h>
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * You can (optionally!) define SDL_MAIN_USE_CALLBACKS before including
+ * SDL_main.h, and then your application will _not_ have a standard
+ * "main" entry point. Instead, it will operate as a collection of
+ * functions that are called as necessary by the system. On some
+ * platforms, this is just a layer where SDL drives your program
+ * instead of your program driving SDL, on other platforms this might
+ * hook into the OS to manage the lifecycle. Programs on most platforms
+ * can use whichever approach they prefer, but the decision boils down
+ * to:
+ *
+ * - Using a standard "main" function: this works like it always has for
+ *   the past 50+ years in C programming, and your app is in control.
+ * - Using the callback functions: this might clean up some code,
+ *   avoid some #ifdef blocks in your program for some platforms, be more
+ *   resource-friendly to the system, and possibly be the primary way to
+ *   access some future platforms (but none require this at the moment).
+ *
+ * This is up to the app; both approaches are considered valid and supported
+ * ways to write SDL apps.
+ *
+ * If using the callbacks, don't define a "main" function. Instead, implement
+ * the functions listed below in your program.
+ */
+#ifdef SDL_MAIN_USE_CALLBACKS
+
+/**
+ * App-implemented initial entry point for SDL_MAIN_USE_CALLBACKS apps.
+ *
+ * Apps implement this function when using SDL_MAIN_USE_CALLBACKS. If using a
+ * standard "main" function, you should not supply this.
+ *
+ * This function is called by SDL once, at startup. The function should
+ * initialize whatever is necessary, possibly create windows and open audio
+ * devices, etc. The `argc` and `argv` parameters work like they would with a
+ * standard "main" function.
+ *
+ * This function should not go into an infinite mainloop; it should do any
+ * one-time setup it requires and then return.
+ *
+ * The app may optionally assign a pointer to `*appstate`. This pointer will
+ * be provided on every future call to the other entry points, to allow
+ * application state to be preserved between functions without the app needing
+ * to use a global variable. If this isn't set, the pointer will be NULL in
+ * future entry points.
+ *
+ * If this function returns SDL_APP_CONTINUE, the app will proceed to normal
+ * operation, and will begin receiving repeated calls to SDL_AppIterate and
+ * SDL_AppEvent for the life of the program. If this function returns
+ * SDL_APP_FAILURE, SDL will call SDL_AppQuit and terminate the process with
+ * an exit code that reports an error to the platform. If it returns
+ * SDL_APP_SUCCESS, SDL calls SDL_AppQuit and terminates with an exit code
+ * that reports success to the platform.
+ *
+ * This function is called by SDL on the main thread.
+ *
+ * \param appstate a place where the app can optionally store a pointer for
+ *                 future use.
+ * \param argc the standard ANSI C main's argc; number of elements in `argv`.
+ * \param argv the standard ANSI C main's argv; array of command line
+ *             arguments.
+ * \returns SDL_APP_FAILURE to terminate with an error, SDL_APP_SUCCESS to
+ *          terminate with success, SDL_APP_CONTINUE to continue.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_AppIterate
+ * \sa SDL_AppEvent
+ * \sa SDL_AppQuit
+ */
+extern SDLMAIN_DECLSPEC SDL_AppResult SDLCALL SDL_AppInit(void **appstate, int argc, char *argv[]);
+
+/**
+ * App-implemented iteration entry point for SDL_MAIN_USE_CALLBACKS apps.
+ *
+ * Apps implement this function when using SDL_MAIN_USE_CALLBACKS. If using a
+ * standard "main" function, you should not supply this.
+ *
+ * This function is called repeatedly by SDL after SDL_AppInit returns
+ * SDL_APP_CONTINUE. The function should operate as a single iteration the
+ * program's primary loop; it should update whatever state it needs and draw a
+ * new frame of video, usually.
+ *
+ * On some platforms, this function will be called at the refresh rate of the
+ * display (which might change during the life of your app!). There are no
+ * promises made about what frequency this function might run at. You should
+ * use SDL's timer functions if you need to see how much time has passed since
+ * the last iteration.
+ *
+ * There is no need to process the SDL event queue during this function; SDL
+ * will send events as they arrive in SDL_AppEvent, and in most cases the
+ * event queue will be empty when this function runs anyhow.
+ *
+ * This function should not go into an infinite mainloop; it should do one
+ * iteration of whatever the program does and return.
+ *
+ * The `appstate` parameter is an optional pointer provided by the app during
+ * SDL_AppInit(). If the app never provided a pointer, this will be NULL.
+ *
+ * If this function returns SDL_APP_CONTINUE, the app will continue normal
+ * operation, receiving repeated calls to SDL_AppIterate and SDL_AppEvent for
+ * the life of the program. If this function returns SDL_APP_FAILURE, SDL will
+ * call SDL_AppQuit and terminate the process with an exit code that reports
+ * an error to the platform. If it returns SDL_APP_SUCCESS, SDL calls
+ * SDL_AppQuit and terminates with an exit code that reports success to the
+ * platform.
+ *
+ * This function is called by SDL on the main thread.
+ *
+ * \param appstate an optional pointer, provided by the app in SDL_AppInit.
+ * \returns SDL_APP_FAILURE to terminate with an error, SDL_APP_SUCCESS to
+ *          terminate with success, SDL_APP_CONTINUE to continue.
+ *
+ * \threadsafety This function may get called concurrently with SDL_AppEvent()
+ *               for events not pushed on the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_AppInit
+ * \sa SDL_AppEvent
+ */
+extern SDLMAIN_DECLSPEC SDL_AppResult SDLCALL SDL_AppIterate(void *appstate);
+
+/**
+ * App-implemented event entry point for SDL_MAIN_USE_CALLBACKS apps.
+ *
+ * Apps implement this function when using SDL_MAIN_USE_CALLBACKS. If using a
+ * standard "main" function, you should not supply this.
+ *
+ * This function is called as needed by SDL after SDL_AppInit returns
+ * SDL_APP_CONTINUE. It is called once for each new event.
+ *
+ * There is (currently) no guarantee about what thread this will be called
+ * from; whatever thread pushes an event onto SDL's queue will trigger this
+ * function. SDL is responsible for pumping the event queue between each call
+ * to SDL_AppIterate, so in normal operation one should only get events in a
+ * serial fashion, but be careful if you have a thread that explicitly calls
+ * SDL_PushEvent. SDL itself will push events to the queue on the main thread.
+ *
+ * Events sent to this function are not owned by the app; if you need to save
+ * the data, you should copy it.
+ *
+ * This function should not go into an infinite mainloop; it should handle the
+ * provided event appropriately and return.
+ *
+ * The `appstate` parameter is an optional pointer provided by the app during
+ * SDL_AppInit(). If the app never provided a pointer, this will be NULL.
+ *
+ * If this function returns SDL_APP_CONTINUE, the app will continue normal
+ * operation, receiving repeated calls to SDL_AppIterate and SDL_AppEvent for
+ * the life of the program. If this function returns SDL_APP_FAILURE, SDL will
+ * call SDL_AppQuit and terminate the process with an exit code that reports
+ * an error to the platform. If it returns SDL_APP_SUCCESS, SDL calls
+ * SDL_AppQuit and terminates with an exit code that reports success to the
+ * platform.
+ *
+ * \param appstate an optional pointer, provided by the app in SDL_AppInit.
+ * \param event the new event for the app to examine.
+ * \returns SDL_APP_FAILURE to terminate with an error, SDL_APP_SUCCESS to
+ *          terminate with success, SDL_APP_CONTINUE to continue.
+ *
+ * \threadsafety This function may get called concurrently with
+ *               SDL_AppIterate() or SDL_AppQuit() for events not pushed from
+ *               the main thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_AppInit
+ * \sa SDL_AppIterate
+ */
+extern SDLMAIN_DECLSPEC SDL_AppResult SDLCALL SDL_AppEvent(void *appstate, SDL_Event *event);
+
+/**
+ * App-implemented deinit entry point for SDL_MAIN_USE_CALLBACKS apps.
+ *
+ * Apps implement this function when using SDL_MAIN_USE_CALLBACKS. If using a
+ * standard "main" function, you should not supply this.
+ *
+ * This function is called once by SDL before terminating the program.
+ *
+ * This function will be called in all cases, even if SDL_AppInit requests
+ * termination at startup.
+ *
+ * This function should not go into an infinite mainloop; it should
+ * deinitialize any resources necessary, perform whatever shutdown activities,
+ * and return.
+ *
+ * You do not need to call SDL_Quit() in this function, as SDL will call it
+ * after this function returns and before the process terminates, but it is
+ * safe to do so.
+ *
+ * The `appstate` parameter is an optional pointer provided by the app during
+ * SDL_AppInit(). If the app never provided a pointer, this will be NULL. This
+ * function call is the last time this pointer will be provided, so any
+ * resources to it should be cleaned up here.
+ *
+ * This function is called by SDL on the main thread.
+ *
+ * \param appstate an optional pointer, provided by the app in SDL_AppInit.
+ * \param result the result code that terminated the app (success or failure).
+ *
+ * \threadsafety SDL_AppEvent() may get called concurrently with this function
+ *               if other threads that push events are still active.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_AppInit
+ */
+extern SDLMAIN_DECLSPEC void SDLCALL SDL_AppQuit(void *appstate, SDL_AppResult result);
+
+#endif  /* SDL_MAIN_USE_CALLBACKS */
+
+
+/**
+ * The prototype for the application's main() function
+ *
+ * \param argc an ANSI-C style main function's argc.
+ * \param argv an ANSI-C style main function's argv.
+ * \returns an ANSI-C main return code; generally 0 is considered successful
+ *          program completion, and small non-zero values are considered
+ *          errors.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef int (SDLCALL *SDL_main_func)(int argc, char *argv[]);
+
+/**
+ * An app-supplied function for program entry.
+ *
+ * Apps do not directly create this function; they should create a standard
+ * ANSI-C `main` function instead. If SDL needs to insert some startup code
+ * before `main` runs, or the platform doesn't actually _use_ a function
+ * called "main", SDL will do some macro magic to redefine `main` to
+ * `SDL_main` and provide its own `main`.
+ *
+ * Apps should include `SDL_main.h` in the same file as their `main` function,
+ * and they should not use that symbol for anything else in that file, as it
+ * might get redefined.
+ *
+ * This function is only provided by the app if it isn't using
+ * SDL_MAIN_USE_CALLBACKS.
+ *
+ * Program startup is a surprisingly complex topic. Please see
+ * [README-main-functions](README-main-functions), (or
+ * docs/README-main-functions.md in the source tree) for a more detailed
+ * explanation.
+ *
+ * \param argc an ANSI-C style main function's argc.
+ * \param argv an ANSI-C style main function's argv.
+ * \returns an ANSI-C main return code; generally 0 is considered successful
+ *          program completion, and small non-zero values are considered
+ *          errors.
+ *
+ * \threadsafety This is the program entry point.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDLMAIN_DECLSPEC int SDLCALL SDL_main(int argc, char *argv[]);
+
+/**
+ * Circumvent failure of SDL_Init() when not using SDL_main() as an entry
+ * point.
+ *
+ * This function is defined in SDL_main.h, along with the preprocessor rule to
+ * redefine main() as SDL_main(). Thus to ensure that your main() function
+ * will not be changed it is necessary to define SDL_MAIN_HANDLED before
+ * including SDL.h.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Init
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_SetMainReady(void);
+
+/**
+ * Initializes and launches an SDL application, by doing platform-specific
+ * initialization before calling your mainFunction and cleanups after it
+ * returns, if that is needed for a specific platform, otherwise it just calls
+ * mainFunction.
+ *
+ * You can use this if you want to use your own main() implementation without
+ * using SDL_main (like when using SDL_MAIN_HANDLED). When using this, you do
+ * *not* need SDL_SetMainReady().
+ *
+ * \param argc the argc parameter from the application's main() function, or 0
+ *             if the platform's main-equivalent has no argc.
+ * \param argv the argv parameter from the application's main() function, or
+ *             NULL if the platform's main-equivalent has no argv.
+ * \param mainFunction your SDL app's C-style main(). NOT the function you're
+ *                     calling this from! Its name doesn't matter; it doesn't
+ *                     literally have to be `main`.
+ * \param reserved should be NULL (reserved for future use, will probably be
+ *                 platform-specific then).
+ * \returns the return value from mainFunction: 0 on success, otherwise
+ *          failure; SDL_GetError() might have more information on the
+ *          failure.
+ *
+ * \threadsafety Generally this is called once, near startup, from the
+ *               process's initial thread.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_RunApp(int argc, char *argv[], SDL_main_func mainFunction, void *reserved);
+
+/**
+ * An entry point for SDL's use in SDL_MAIN_USE_CALLBACKS.
+ *
+ * Generally, you should not call this function directly. This only exists to
+ * hand off work into SDL as soon as possible, where it has a lot more control
+ * and functionality available, and make the inline code in SDL_main.h as
+ * small as possible.
+ *
+ * Not all platforms use this, it's actual use is hidden in a magic
+ * header-only library, and you should not call this directly unless you
+ * _really_ know what you're doing.
+ *
+ * \param argc standard Unix main argc.
+ * \param argv standard Unix main argv.
+ * \param appinit the application's SDL_AppInit function.
+ * \param appiter the application's SDL_AppIterate function.
+ * \param appevent the application's SDL_AppEvent function.
+ * \param appquit the application's SDL_AppQuit function.
+ * \returns standard Unix main return value.
+ *
+ * \threadsafety It is not safe to call this anywhere except as the only
+ *               function call in SDL_main.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC int SDLCALL SDL_EnterAppMainCallbacks(int argc, char *argv[], SDL_AppInit_func appinit, SDL_AppIterate_func appiter, SDL_AppEvent_func appevent, SDL_AppQuit_func appquit);
+
+
+#if defined(SDL_PLATFORM_WINDOWS)
+
+/**
+ * Register a win32 window class for SDL's use.
+ *
+ * This can be called to set the application window class at startup. It is
+ * safe to call this multiple times, as long as every call is eventually
+ * paired with a call to SDL_UnregisterApp, but a second registration attempt
+ * while a previous registration is still active will be ignored, other than
+ * to increment a counter.
+ *
+ * Most applications do not need to, and should not, call this directly; SDL
+ * will call it when initializing the video subsystem.
+ *
+ * If `name` is NULL, SDL currently uses `(CS_BYTEALIGNCLIENT | CS_OWNDC)` for
+ * the style, regardless of what is specified here.
+ *
+ * \param name the window class name, in UTF-8 encoding. If NULL, SDL
+ *             currently uses "SDL_app" but this isn't guaranteed.
+ * \param style the value to use in WNDCLASSEX::style.
+ * \param hInst the HINSTANCE to use in WNDCLASSEX::hInstance. If zero, SDL
+ *              will use `GetModuleHandle(NULL)` instead.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_RegisterApp(const char *name, Uint32 style, void *hInst);
+
+/**
+ * Deregister the win32 window class from an SDL_RegisterApp call.
+ *
+ * This can be called to undo the effects of SDL_RegisterApp.
+ *
+ * Most applications do not need to, and should not, call this directly; SDL
+ * will call it when deinitializing the video subsystem.
+ *
+ * It is safe to call this multiple times, as long as every call is eventually
+ * paired with a prior call to SDL_RegisterApp. The window class will only be
+ * deregistered when the registration counter in SDL_RegisterApp decrements to
+ * zero through calls to this function.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_UnregisterApp(void);
+
+#endif /* defined(SDL_PLATFORM_WINDOWS) */
+
+/**
+ * Callback from the application to let the suspend continue.
+ *
+ * This function is only needed for Xbox GDK support; all other platforms will
+ * do nothing and set an "unsupported" error message.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_GDKSuspendComplete(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#include <SDL3/SDL_close_code.h>
+
+#if !defined(SDL_MAIN_HANDLED) && !defined(SDL_MAIN_NOIMPL)
+    /* include header-only SDL_main implementations */
+    #if defined(SDL_MAIN_USE_CALLBACKS) || defined(SDL_MAIN_NEEDED) || defined(SDL_MAIN_AVAILABLE)
+        /* platforms which main (-equivalent) can be implemented in plain C */
+        #include <SDL3/SDL_main_impl.h>
+    #endif
+#endif
+
+#endif /* SDL_main_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_main_impl.h

@@ -0,0 +1,151 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/* WIKI CATEGORY: Main */
+
+#ifndef SDL_main_impl_h_
+#define SDL_main_impl_h_
+
+#ifndef SDL_main_h_
+#error "This header should not be included directly, but only via SDL_main.h!"
+#endif
+
+/* if someone wants to include SDL_main.h but doesn't want the main handing magic,
+   (maybe to call SDL_RegisterApp()) they can #define SDL_MAIN_HANDLED first.
+   SDL_MAIN_NOIMPL is for SDL-internal usage (only affects implementation,
+   not definition of SDL_MAIN_AVAILABLE etc in SDL_main.h) and if the user wants
+   to have the SDL_main implementation (from this header) in another source file
+   than their main() function, for example if SDL_main requires C++
+   and main() is implemented in plain C */
+#if !defined(SDL_MAIN_HANDLED) && !defined(SDL_MAIN_NOIMPL)
+
+    /* the implementations below must be able to use the implement real main(), nothing renamed
+       (the user's main() will be renamed to SDL_main so it can be called from here) */
+    #ifdef main
+        #undef main
+    #endif
+
+    #ifdef SDL_MAIN_USE_CALLBACKS
+
+        #if 0
+            /* currently there are no platforms that _need_ a magic entry point here
+               for callbacks, but if one shows up, implement it here. */
+
+        #else /* use a standard SDL_main, which the app SHOULD NOT ALSO SUPPLY. */
+
+            /* this define makes the normal SDL_main entry point stuff work...we just provide SDL_main() instead of the app. */
+            #define SDL_MAIN_CALLBACK_STANDARD 1
+
+            int SDL_main(int argc, char **argv)
+            {
+                return SDL_EnterAppMainCallbacks(argc, argv, SDL_AppInit, SDL_AppIterate, SDL_AppEvent, SDL_AppQuit);
+            }
+
+        #endif  /* platform-specific tests */
+
+    #endif  /* SDL_MAIN_USE_CALLBACKS */
+
+
+    /* set up the usual SDL_main stuff if we're not using callbacks or if we are but need the normal entry point,
+       unless the real entry point needs to be somewhere else entirely, like Android where it's in Java code */
+    #if (!defined(SDL_MAIN_USE_CALLBACKS) || defined(SDL_MAIN_CALLBACK_STANDARD)) && !defined(SDL_MAIN_EXPORTED)
+
+        #if defined(SDL_PLATFORM_PRIVATE_MAIN)
+            /* Private platforms may have their own ideas about entry points. */
+            #include "SDL_main_impl_private.h"
+
+        #elif defined(SDL_PLATFORM_WINDOWS)
+
+            /* these defines/typedefs are needed for the WinMain() definition */
+            #ifndef WINAPI
+                #define WINAPI __stdcall
+            #endif
+
+            typedef struct HINSTANCE__ * HINSTANCE;
+            typedef char *LPSTR;
+            typedef wchar_t *PWSTR;
+
+            /* The VC++ compiler needs main/wmain defined, but not for GDK */
+            #if defined(_MSC_VER) && !defined(SDL_PLATFORM_GDK)
+
+                /* This is where execution begins [console apps] */
+                #if defined(UNICODE) && UNICODE
+                    int wmain(int argc, wchar_t *wargv[], wchar_t *wenvp)
+                    {
+                        (void)argc;
+                        (void)wargv;
+                        (void)wenvp;
+                        return SDL_RunApp(0, NULL, SDL_main, NULL);
+                    }
+                #else /* ANSI */
+                    int main(int argc, char *argv[])
+                    {
+                        (void)argc;
+                        (void)argv;
+                        return SDL_RunApp(0, NULL, SDL_main, NULL);
+                    }
+                #endif /* UNICODE */
+
+            #endif /* _MSC_VER && ! SDL_PLATFORM_GDK */
+
+            /* This is where execution begins [windowed apps and GDK] */
+
+            #ifdef __cplusplus
+            extern "C" {
+            #endif
+
+            #if defined(UNICODE) && UNICODE
+            int WINAPI wWinMain(HINSTANCE hInst, HINSTANCE hPrev, PWSTR szCmdLine, int sw)
+            #else /* ANSI */
+            int WINAPI WinMain(HINSTANCE hInst, HINSTANCE hPrev, LPSTR szCmdLine, int sw)
+            #endif
+            {
+                (void)hInst;
+                (void)hPrev;
+                (void)szCmdLine;
+                (void)sw;
+                return SDL_RunApp(0, NULL, SDL_main, NULL);
+            }
+
+            #ifdef __cplusplus
+            } /* extern "C" */
+            #endif
+
+            /* end of SDL_PLATFORM_WINDOWS impls */
+
+        #else /* platforms that use a standard main() and just call SDL_RunApp(), like iOS and 3DS */
+            int main(int argc, char *argv[])
+            {
+                return SDL_RunApp(argc, argv, SDL_main, NULL);
+            }
+
+            /* end of impls for standard-conforming platforms */
+
+        #endif /* SDL_PLATFORM_WIN32 etc */
+
+    #endif /* !defined(SDL_MAIN_USE_CALLBACKS) || defined(SDL_MAIN_CALLBACK_STANDARD) */
+
+    /* rename users main() function to SDL_main() so it can be called from the wrappers above */
+    #define main    SDL_main
+
+#endif /* SDL_MAIN_HANDLED */
+
+#endif /* SDL_main_impl_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_messagebox.h

@@ -0,0 +1,226 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryMessagebox
+ *
+ * SDL offers a simple message box API, which is useful for simple alerts,
+ * such as informing the user when something fatal happens at startup without
+ * the need to build a UI for it (or informing the user _before_ your UI is
+ * ready).
+ *
+ * These message boxes are native system dialogs where possible.
+ *
+ * There is both a customizable function (SDL_ShowMessageBox()) that offers
+ * lots of options for what to display and reports on what choice the user
+ * made, and also a much-simplified version (SDL_ShowSimpleMessageBox()),
+ * merely takes a text message and title, and waits until the user presses a
+ * single "OK" UI button. Often, this is all that is necessary.
+ */
+
+#ifndef SDL_messagebox_h_
+#define SDL_messagebox_h_
+
+#include <SDL3/SDL_stdinc.h>
+#include <SDL3/SDL_error.h>
+#include <SDL3/SDL_video.h>      /* For SDL_Window */
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Message box flags.
+ *
+ * If supported will display warning icon, etc.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef Uint32 SDL_MessageBoxFlags;
+
+#define SDL_MESSAGEBOX_ERROR                    0x00000010u /**< error dialog */
+#define SDL_MESSAGEBOX_WARNING                  0x00000020u /**< warning dialog */
+#define SDL_MESSAGEBOX_INFORMATION              0x00000040u /**< informational dialog */
+#define SDL_MESSAGEBOX_BUTTONS_LEFT_TO_RIGHT    0x00000080u /**< buttons placed left to right */
+#define SDL_MESSAGEBOX_BUTTONS_RIGHT_TO_LEFT    0x00000100u /**< buttons placed right to left */
+
+/**
+ * SDL_MessageBoxButtonData flags.
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef Uint32 SDL_MessageBoxButtonFlags;
+
+#define SDL_MESSAGEBOX_BUTTON_RETURNKEY_DEFAULT 0x00000001u /**< Marks the default button when return is hit */
+#define SDL_MESSAGEBOX_BUTTON_ESCAPEKEY_DEFAULT 0x00000002u /**< Marks the default button when escape is hit */
+
+/**
+ * Individual button data.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_MessageBoxButtonData
+{
+    SDL_MessageBoxButtonFlags flags;
+    int buttonID;       /**< User defined button id (value returned via SDL_ShowMessageBox) */
+    const char *text;   /**< The UTF-8 button text */
+} SDL_MessageBoxButtonData;
+
+/**
+ * RGB value used in a message box color scheme
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_MessageBoxColor
+{
+    Uint8 r, g, b;
+} SDL_MessageBoxColor;
+
+/**
+ * An enumeration of indices inside the colors array of
+ * SDL_MessageBoxColorScheme.
+ */
+typedef enum SDL_MessageBoxColorType
+{
+    SDL_MESSAGEBOX_COLOR_BACKGROUND,
+    SDL_MESSAGEBOX_COLOR_TEXT,
+    SDL_MESSAGEBOX_COLOR_BUTTON_BORDER,
+    SDL_MESSAGEBOX_COLOR_BUTTON_BACKGROUND,
+    SDL_MESSAGEBOX_COLOR_BUTTON_SELECTED,
+    SDL_MESSAGEBOX_COLOR_COUNT                    /**< Size of the colors array of SDL_MessageBoxColorScheme. */
+} SDL_MessageBoxColorType;
+
+/**
+ * A set of colors to use for message box dialogs
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_MessageBoxColorScheme
+{
+    SDL_MessageBoxColor colors[SDL_MESSAGEBOX_COLOR_COUNT];
+} SDL_MessageBoxColorScheme;
+
+/**
+ * MessageBox structure containing title, text, window, etc.
+ *
+ * \since This struct is available since SDL 3.2.0.
+ */
+typedef struct SDL_MessageBoxData
+{
+    SDL_MessageBoxFlags flags;
+    SDL_Window *window;                 /**< Parent window, can be NULL */
+    const char *title;                  /**< UTF-8 title */
+    const char *message;                /**< UTF-8 message text */
+
+    int numbuttons;
+    const SDL_MessageBoxButtonData *buttons;
+
+    const SDL_MessageBoxColorScheme *colorScheme;   /**< SDL_MessageBoxColorScheme, can be NULL to use system settings */
+} SDL_MessageBoxData;
+
+/**
+ * Create a modal message box.
+ *
+ * If your needs aren't complex, it might be easier to use
+ * SDL_ShowSimpleMessageBox.
+ *
+ * This function should be called on the thread that created the parent
+ * window, or on the main thread if the messagebox has no parent. It will
+ * block execution of that thread until the user clicks a button or closes the
+ * messagebox.
+ *
+ * This function may be called at any time, even before SDL_Init(). This makes
+ * it useful for reporting errors like a failure to create a renderer or
+ * OpenGL context.
+ *
+ * On X11, SDL rolls its own dialog box with X11 primitives instead of a
+ * formal toolkit like GTK+ or Qt.
+ *
+ * Note that if SDL_Init() would fail because there isn't any available video
+ * target, this function is likely to fail for the same reasons. If this is a
+ * concern, check the return value from this function and fall back to writing
+ * to stderr if you can.
+ *
+ * \param messageboxdata the SDL_MessageBoxData structure with title, text and
+ *                       other options.
+ * \param buttonid the pointer to which user id of hit button should be
+ *                 copied.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ShowSimpleMessageBox
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_ShowMessageBox(const SDL_MessageBoxData *messageboxdata, int *buttonid);
+
+/**
+ * Display a simple modal message box.
+ *
+ * If your needs aren't complex, this function is preferred over
+ * SDL_ShowMessageBox.
+ *
+ * `flags` may be any of the following:
+ *
+ * - `SDL_MESSAGEBOX_ERROR`: error dialog
+ * - `SDL_MESSAGEBOX_WARNING`: warning dialog
+ * - `SDL_MESSAGEBOX_INFORMATION`: informational dialog
+ *
+ * This function should be called on the thread that created the parent
+ * window, or on the main thread if the messagebox has no parent. It will
+ * block execution of that thread until the user clicks a button or closes the
+ * messagebox.
+ *
+ * This function may be called at any time, even before SDL_Init(). This makes
+ * it useful for reporting errors like a failure to create a renderer or
+ * OpenGL context.
+ *
+ * On X11, SDL rolls its own dialog box with X11 primitives instead of a
+ * formal toolkit like GTK+ or Qt.
+ *
+ * Note that if SDL_Init() would fail because there isn't any available video
+ * target, this function is likely to fail for the same reasons. If this is a
+ * concern, check the return value from this function and fall back to writing
+ * to stderr if you can.
+ *
+ * \param flags an SDL_MessageBoxFlags value.
+ * \param title UTF-8 title text.
+ * \param message UTF-8 message text.
+ * \param window the parent window, or NULL for no parent.
+ * \returns true on success or false on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_ShowMessageBox
+ */
+extern SDL_DECLSPEC bool SDLCALL SDL_ShowSimpleMessageBox(SDL_MessageBoxFlags flags, const char *title, const char *message, SDL_Window *window);
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_messagebox_h_ */

Source/3rdParty/SDL_net/Xcode/iOS/SDL3.framework/Headers/SDL_metal.h

@@ -0,0 +1,107 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2025 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ * # CategoryMetal
+ *
+ * Functions to creating Metal layers and views on SDL windows.
+ *
+ * This provides some platform-specific glue for Apple platforms. Most macOS
+ * and iOS apps can use SDL without these functions, but this API they can be
+ * useful for specific OS-level integration tasks.
+ */
+
+#ifndef SDL_metal_h_
+#define SDL_metal_h_
+
+#include <SDL3/SDL_video.h>
+
+#include <SDL3/SDL_begin_code.h>
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * A handle to a CAMetalLayer-backed NSView (macOS) or UIView (iOS/tvOS).
+ *
+ * \since This datatype is available since SDL 3.2.0.
+ */
+typedef void *SDL_MetalView;
+
+/**
+ *  \name Metal support functions
+ */
+/* @{ */
+
+/**
+ * Create a CAMetalLayer-backed NSView/UIView and attach it to the specified
+ * window.
+ *
+ * On macOS, this does *not* associate a MTLDevice with the CAMetalLayer on
+ * its own. It is up to user code to do that.
+ *
+ * The returned handle can be casted directly to a NSView or UIView. To access
+ * the backing CAMetalLayer, call SDL_Metal_GetLayer().
+ *
+ * \param window the window.
+ * \returns handle NSView or UIView.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Metal_DestroyView
+ * \sa SDL_Metal_GetLayer
+ */
+extern SDL_DECLSPEC SDL_MetalView SDLCALL SDL_Metal_CreateView(SDL_Window *window);
+
+/**
+ * Destroy an existing SDL_MetalView object.
+ *
+ * This should be called before SDL_DestroyWindow, if SDL_Metal_CreateView was
+ * called after SDL_CreateWindow.
+ *
+ * \param view the SDL_MetalView object.
+ *
+ * \since This function is available since SDL 3.2.0.
+ *
+ * \sa SDL_Metal_CreateView
+ */
+extern SDL_DECLSPEC void SDLCALL SDL_Metal_DestroyView(SDL_MetalView view);
+
+/**
+ * Get a pointer to the backing CAMetalLayer for the given view.
+ *
+ * \param view the SDL_MetalView object.
+ * \returns a pointer.
+ *
+ * \since This function is available since SDL 3.2.0.
+ */
+extern SDL_DECLSPEC void * SDLCALL SDL_Metal_GetLayer(SDL_MetalView view);
+
+/* @} *//* Metal support functions */
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include <SDL3/SDL_close_code.h>
+
+#endif /* SDL_metal_h_ */