- Fixes#22763
The XMB's video player boots the ME in mode 3 through sceMeCore_driver's
sceMeBootStart (5dff5c50), where games get mode 2. Mode 3 only changes the
argument to ME command 0x185 (me_wrapper.prx), and the player sets the AAC
context flag at 0x2d on anything newer than a PSP-1000 and plays those
files, so sceAudiocodecInit now accepts the 0x2c/0x2d flags in mode 3.
Games still get the failure pspautotests audio/audiocodec/context records.
Also implements the two vaudio calls the player uses: a ChReserveBuffering
that routes each buffer through an ME effect (E8E78DC8), and the setter for
its parameter (504E4745). The effect isn't known, so audio goes out as is.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A vertical ScrollView that extends into the bottom inset (like a navigation bar) adds
that much space after its contents, so the end can be scrolled out from under it.
It only did that when the view reached the very bottom of the screen, and then added
the whole inset. Since 58fa522d48 inset the content area of dialog screens on
screens over 600 dp, a phone like the S21 Ultra (617 dp wide) got a 1.7 dp inset,
which turned the extra space off. Add exactly the part of the view that lies in the
inset instead, and skip the bottom shadow in that case.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
It wrote Key = Key, which for a key like PacketRelayHint that isn't its own
English text puts the key name itself in the UI of every untranslated
language. Now it takes the value from en_US.ini, falling back to the key.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An Android 11 TV played nothing over a Bluetooth headset since the switch
to Oboe, while its speakers worked. Testing on it showed AAudio with MMAP
is silent there and AAudio without MMAP works, as does OpenSL ES (also
when the headset is connected mid-game), whatever the stream usage. MMAP
should never be used for a Bluetooth route, so it's a firmware bug.
Audio settings get an Audio API choice and a Low-latency audio (MMAP)
checkbox, with hints, so other devices with the same kind of bug can be
worked around. The API defaults to OpenSL ES on TVs and before Android
8.1, where the choice isn't offered, and AAudio elsewhere. Changing them
reopens the streams right away. System Information shows the output
stream that got opened (API, MMAP or not, rate, buffers, device) and any
audio error.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Dialog screens (tabbed, two-pane, simple and the others built on
UIBaseDialogScreen) center their content at up to 1400 wide, instead of
stretching settings rows and buttons across very wide windows.
On large screens, those screens and the main screen also get an inset on all
sides, since controls right at the edge are hard to see there. It grows with
the screen's smaller dimension, from nothing at 600 to the full inset at
1000, and is always full on TVs. The game, popups, and the screens that
position things to match the game's screen (display layout, touch control
layout and tests, custom button and visual mapping) are left as they were.
The root's bounds are computed by UIScreen::GetContentBounds, since
UI::Margins can't hold widths this large.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
NativeShutdownGraphics, which Android runs whenever the app loses its
surface, destroyed the imgui context and the ImDebugger along with the
device objects, so window layout and debugger state reset on return.
Now only the device objects go there (the backend already recreates
them), and the context and debugger are torn down in NativeShutdown.
Both configs are still saved on device loss, in case the app is killed
in the background.
imgui.ini is now read and written through our File API rather than
imgui's fopen, which can't reach a memstick behind a content URI.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
POPS (the PS1 emulator) uses HOME for its menu. The touch button is hidden by
default, and HOME still has no default key mapping. It's also appended to the
custom button and gesture key lists.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
ChoiceGroups no longer have hardcoded margins. A new ChoiceGroupList holds them,
with padding and spacing that give the same look as before. Settings tabs, developer
tools, the two-pane settings columns, the pause menu and the rest put their groups in
one, and a few screens adjust its padding and spacing to their layout.
Also add the two groups in the remote disc streaming settings that were created but
never added, and make the settings search look inside groups: it only checked a tab's
direct children, so with ChoiceGroups a filter hid everything.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Grid children are given LinearLayoutParams almost everywhere, so their margins are
taken from those as well as from GridLayoutParams, which gains margins.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
SetContentGravity centers the children, or moves them to the end, when they don't
fill the layout.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Lay out children across the layout direction within the layout's bounds rather than
its measured size, which differ when a parent clamps it. And count weighted
children's margins when growing to fit them.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Nothing used it, and it didn't work: it never set its own size, centered vertically
using the width, and didn't lay out its children.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Centering gravity centered in the whole cell, ignoring the margins, so a view with
uneven margins ended up off center.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The child was measured inside its margins, then had them subtracted from its bounds
again, and the leading margin along the scroll direction was never applied, so the
end of the content couldn't be scrolled to. Also include the margins when wrapping
the content, and page horizontally by the width rather than the x position.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
MeasureBySpec compared the spec against the view's previous measurement instead of
its fixed size, so a fixed-size view larger than the space offered wasn't clamped
unless an earlier measure happened to be larger.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
LinearLayout had a public padding member that only DisplayLayoutScreen set. Make it
private with a setter, and fix the measuring: the vertical retry used the horizontal
padding, the AT_MOST retries and the weighted children ignored it, and growing to fit
weighted children counted it twice.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Part of #22669.
An in-mission cutscene starts on a black screen held for a number of updates
set by the cutscene, while its setup moves the actors at a speed given in
time. In Episode 1 Part 4 the hold is 12 updates: at 60fps the fade in starts
0.25s in, and Gabe is seen sliding across the room for 0.3s on his way to his
start position. Count the hold at 20fps, which starts the fade 0.6s in, right
after he arrives, as in the PSP footage.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
PathBrowser lists on one thread, so going up from the network folder
waited for its listing to finish (up to 8 seconds) before the drive list
showed. Pass GetFilesInDir a cancel flag that PathBrowser sets whenever
the path changes, or on destruction, and check it while waiting.
Also don't probe the drives in the drive list for game folders.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The path display says Network instead of \\, and the folder button in
the drive list gets the new I_NETWORK icon and a translated name.
images.svg also picks up I_TOGGLE_ON and I_TOGGLE_OFF, not used yet.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The drive list gets a Network entry, the path //, which lists the
servers in the shell's network folder (the old WNet enumeration finds
nothing on a modern network). Going up from \\server now lands there
instead of in the drive list.
Network listings run on a thread of their own with a deadline, since
they can block for a long time and can't be cancelled: the network
folder keeps its enumerator open for half a minute after it has found
everything, and NetShareEnum on a server that doesn't answer hangs too.
We take what has turned up after a quiet second, or after 8 seconds at
the most.
GameBrowser skips probing the servers for game folders, which would
contact each one from the UI thread.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The icon was padded to a full-width ARGB square, so a big ICON0 made the
result too large for the binder transaction. finish() threw, we caught it,
and the next finish (the back gesture) crashed with "Could not copy bitmap
to parcel blob". Scale it to launcher icon size, and if finishing still
fails, retry without the icon.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Part of #22669.
When a scripted move reaches its target, the AI only issues the next command
("face this way") two updates later, so the actor coasts for two frames before
turning. At 60fps that's 33ms: the turn starts further from the target, the slide
carries Gabe out of the 1.0 target radius, the steering seeks the target again and
he spins, ending up with his back to the camera in the Episode 1 Part 1 cutscene.
At 20fps (where the pose matches PSP footage) he coasts for 0.1s.
Hook the steering function to hold the turn rate at zero for the first 0.1s after
arriving, so every frame rate gets the 20fps outcome. Anchor heading measured in
that scene: 60fps -81 (was -150), 30fps -82 (was -116), 20fps -80, 15fps -75.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>