Eric Blake a15fcc3cf6 qapi: Add new clone visitor
We have a couple places in the code base that want to deep-clone
one QAPI object into another, and they were resorting to serializing
the struct out to QObject then reparsing it.  A much more efficient
version can be done by adding a new clone visitor.

Since cloning is still relatively uncommon, expose the use of the
new visitor via a QAPI_CLONE() macro that takes care of type-punning
the underlying function pointer, rather than generating lots of
unused functions for types that won't be cloned.  And yes, we're
relying on the compiler treating all pointers equally, even though
a strict C program cannot portably do so - but we're not the first
one in the qemu code base to expect it to work (hello, glib!).

The choice of adding a fourth visitor type deserves some explanation.
On the surface, the clone visitor is mostly an input visitor (it
takes arbitrary input - in this case, another QAPI object - and
creates a new QAPI object during the course of the visit).  But
ever since commit da72ab0 consolidated enum visits based on the
visitor type, using VISITOR_INPUT would cause us to run
visit_type_str(), even though for cloning there is nothing to do
(we just copy the enum value across, without regards to its mapping
to strings).   Also, since our input happens to be a QAPI object,
we can also satisfy the internal checks for VISITOR_OUTPUT.  So in
the end, I settled with a new VISITOR_CLONE, and chose its value
such that many internal checks can use 'v->type & mask', sticking
to 'v->type == value' where the difference matters.

Note that we can only clone objects (including alternates) and lists,
not built-ins or enums.  The visitor core hides integer width from
the actual visitor (since commit 04e070d), and as long as that's the
case, we can't clone top-level integers.  Then again, those can
always be cloned by direct copy, since they are not objects with
deep pointers, so it's no real loss.  And restricting cloning to
just objects and lists is cleaner than restricting it to non-integers.
As such, I documented that the clone visitor is for direct use only
by code internal to QAPI, and should not be used on incomplete objects
(other than a hack to work around the fact that we allow NULL in place
of "" in visit_type_str() in other output visitors).  Note that as
written, the clone visitor will never fail on a complete object.

Scalars (including enums) not at the root of the clone copy just fine
with no additional effort while visiting the scalar, by virtue of a
g_memdup() each time we push another struct onto the stack.  Cloning
a string requires deduplication of a pointer, which means it can also
provide the guarantee of an input visitor of never producing NULL
even when still accepting NULL in place of "" the way the QMP output
visitor does.

Cloning an 'any' type could be possible by incrementing the QObject
refcnt, but it's not obvious whether that is better than implementing
a QObject deep clone.  So for now, we document it as unsupported,
and intentionally omit the .type_any() callback to let a developer
know their usage needs implementation.

Add testsuite coverage for several different clone situations, to
ensure that the code is working.  I also tested that valgrind was
happy with the test.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
2016-06-16 18:39:03 +02:00
2016-05-20 15:07:46 +01:00
2016-07-01 14:38:54 +02:00
2016-07-06 10:52:04 +02:00
2016-06-29 16:49:41 +02:00
2016-06-14 13:34:50 +02:00
2016-07-01 16:06:57 +01:00
2016-07-06 10:52:04 +02:00
2016-07-06 10:52:03 +02:00
2016-07-06 10:52:04 +02:00
…
…
2016-02-04 17:41:30 +00:00
2016-02-04 17:41:30 +00:00
2016-02-04 17:41:30 +00:00
2016-02-04 17:41:30 +00:00
…
…
2016-02-04 17:41:30 +00:00
2016-06-16 18:39:03 +02:00
2016-07-06 10:52:04 +02:00
2016-05-19 16:42:30 +02:00
2016-02-04 17:41:30 +00:00
2016-06-16 18:39:04 +02:00
2016-05-30 14:03:59 +10:00
…
2016-02-04 17:41:30 +00:00
2016-07-06 10:52:03 +02:00
2016-06-16 18:39:03 +02:00
2016-02-04 17:41:30 +00:00
2016-06-28 21:14:12 +01:00
2016-06-28 21:14:12 +01:00
2016-07-04 14:50:58 +03:00
2016-06-07 18:19:25 +03:00
…
2016-02-04 17:41:30 +00:00
2016-05-20 15:07:46 +01:00
2016-02-04 17:41:30 +00:00
2016-05-12 12:35:25 +01:00
2016-01-29 15:07:23 +00:00
2016-02-06 20:44:10 +02:00
2016-07-04 14:50:00 +03:00
2016-06-16 18:39:03 +02:00

         QEMU README
         ===========

QEMU is a generic and open source machine & userspace emulator and
virtualizer.

QEMU is capable of emulating a complete machine in software without any
need for hardware virtualization support. By using dynamic translation,
it achieves very good performance. QEMU can also integrate with the Xen
and KVM hypervisors to provide emulated hardware while allowing the
hypervisor to manage the CPU. With hypervisor support, QEMU can achieve
near native performance for CPUs. When QEMU emulates CPUs directly it is
capable of running operating systems made for one machine (e.g. an ARMv7
board) on a different machine (e.g. an x86_64 PC board).

QEMU is also capable of providing userspace API virtualization for Linux
and BSD kernel interfaces. This allows binaries compiled against one
architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a
different architecture ABI (e.g. the Linux x86_64 ABI). This does not
involve any hardware emulation, simply CPU and syscall emulation.

QEMU aims to fit into a variety of use cases. It can be invoked directly
by users wishing to have full control over its behaviour and settings.
It also aims to facilitate integration into higher level management
layers, by providing a stable command line interface and monitor API.
It is commonly invoked indirectly via the libvirt library when using
open source applications such as oVirt, OpenStack and virt-manager.

QEMU as a whole is released under the GNU General Public License,
version 2. For full licensing details, consult the LICENSE file.


Building
========

QEMU is multi-platform software intended to be buildable on all modern
Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety
of other UNIX targets. The simple steps to build QEMU are:

  mkdir build
  cd build
  ../configure
  make

Complete details of the process for building and configuring QEMU for
all supported host platforms can be found in the qemu-tech.html file.
Additional information can also be found online via the QEMU website:

  http://qemu-project.org/Hosts/Linux
  http://qemu-project.org/Hosts/W32


Submitting patches
==================

The QEMU source code is maintained under the GIT version control system.

   git clone git://git.qemu-project.org/qemu.git

When submitting patches, the preferred approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
guidelines set out in the HACKING and CODING_STYLE files.

Additional information on submitting patches can be found online via
the QEMU website

  http://qemu-project.org/Contribute/SubmitAPatch
  http://qemu-project.org/Contribute/TrivialPatches


Bug reporting
=============

The QEMU project uses Launchpad as its primary upstream bug tracker. Bugs
found when running code built from QEMU git or upstream released sources
should be reported via:

  https://bugs.launchpad.net/qemu/

If using QEMU via an operating system vendor pre-built binary package, it
is preferable to report bugs to the vendor's own bug tracker first. If
the bug is also known to affect latest upstream code, it can also be
reported via launchpad.

For additional information on bug reporting consult:

  http://qemu-project.org/Contribute/ReportABug


Contact
=======

The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC

 - qemu-devel@nongnu.org
   http://lists.nongnu.org/mailman/listinfo/qemu-devel
 - #qemu on irc.oftc.net

Information on additional methods of contacting the community can be
found online via the QEMU website:

  http://qemu-project.org/Contribute/StartHere

-- End
S
Description
Original Xbox Emulator for Windows, macOS, and Linux (Active Development)
Readme GPL-2.0
720 MiB
0 Stars 1 Watchers 0 Forks
Languages
C 82.3%
C++ 6.9%
Python 3.5%
Dylan 2.7%
Shell 1.5%
Other 2.9%