The existing tries to round up the number of pages but @pages is always
calculated as the rounded up value minus one which makes ctz64() always
return 0 and have create.levels always set 1.
This removes wrong "-1" and allows having more than 1 levels. This becomes
handy for >128GB guests with standard 64K pages as this requires blocks
with zone order 9 and the popular limit of CONFIG_FORCE_MAX_ZONEORDER=9
means that only blocks up to order 8 are allowed.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
libfdt failures when creating the FDT should cause QEMU to terminate.
Let's use the _FDT() macro which does just that instead of propagating
the error to the caller. spapr_populate_pci_child_dt() no longer needs
to return a value in this case.
Note that, on the way, this get rids of the following nonsensical lines:
g_assert(!ret);
if (ret) {
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All other users in hw/ppc already consider an error when building
the FDT to be fatal, even on hotplug paths. There's no valid reason
for spapr_pci to behave differently. So let's used the common _FDT()
helper which terminates QEMU when libfdt fails.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The OV5_MMU_RADIX_300 requires special handling in the CAS negotiation
process. It is cleared from the option vector of the guest before
evaluating the changes and re-added later. But, when testing for a
possible CAS reset :
spapr->cas_reboot = spapr_ovec_diff(ov5_updates,
ov5_cas_old, spapr->ov5_cas);
the bit OV5_MMU_RADIX_300 will each time be seen as removed from the
previous OV5 set, hence generating a reset loop.
Fix this problem by also clearing the same bit in the ov5_cas_old set.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER9, the Client Architecture Support (CAS) negotiation process
determines whether the guest operates in XIVE Legacy compatibility or
in XIVE exploitation mode. Now that we have initial guest support for
the XIVE interrupt controller, let's fix the bits definition which have
evolved in the latest specs.
The platform advertises the XIVE Exploitation Mode support using the
property "ibm,arch-vec-5-platform-support-vec-5", byte 23 bits 0-1 :
- 0b00 XIVE legacy mode Only
- 0b01 XIVE exploitation mode Only
- 0b10 XIVE legacy or exploitation mode
The OS asks for XIVE Exploitation Mode support using the property
"ibm,architecture-vec-5", byte 23 bits 0-1:
- 0b00 XIVE legacy mode Only
- 0b01 XIVE exploitation mode Only
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit b55d295e3e added the possibility to support HPT resizing with KVM.
In the case of PR, we need to pass the userspace address of the HPT to KVM
using the SDR1 slot.
This is handled by kvmppc_update_sdr1() which uses CPU_FOREACH() to update
all CPUs. It is hence not needed to call kvmppc_update_sdr1() for each CPU.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Building strings with g_strdup_printf() instead of snprintf() is
a QEMU common practice.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_phb_get_loc_code() either returns a non-null pointer, or aborts
if g_strdup_printf() failed to allocate memory.
Signed-off-by: Greg Kurz <groug@kaod.org>
[dwg: Grammatical fix to commit message]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
g_strdup_printf() either returns a non-null pointer, or aborts if it
failed to allocate memory.
Signed-off-by: Greg Kurz <groug@kaod.org>
[dwg: Grammatical fix to commit message]
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch removes the qdev_get_machine() calls that are made in
spapr.c in situations where we can get an existing pointer for
the MachineState by either passing it as an argument to the function
or by using other already available pointers.
The following changes were made:
- spapr_node0_size: static function that is called two times:
at spapr_setup_hpt_and_vrma and ppc_spapr_init. In both cases we can
pass an existing MachineState pointer to it.
- spapr_build_fdt: MachineState pointer can be retrieved from
the existing sPAPRMachineState pointer.
- spapr_boot_set: the opaque in the first arg is a sPAPRMachineState
pointer as we can see inside ppc_spapr_init:
qemu_register_boot_set(spapr_boot_set, spapr);
We can get a MachineState pointer from it.
- spapr_machine_device_plug and spapr_machine_device_unplug_request: the
MachineState, sPAPRMachineState, MachineClass and sPAPRMachineClass pointers
can all be retrieved from the HotplugHandler pointer.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds a simplistic emulation of the Sun GEM ethernet controller
found in Apple ASICs.
Currently we only support the Apple UniNorth 1.x variant, but the
other Apple or Sun variants should mostly be a matter of adding
PCI IDs options.
We have a very primitive emulation of a single Broadcom 5201 PHY
which is supported by the MacOS driver.
This model brings out-of-the-box networking to MacOS 9, and all
versions of OS X I tried with the mac99 platform.
Further improvements from Mark:
- Remove sungem.h file, moving constants into sungem.c as required
- Switch to using tracepoints for debugging
- Split register blocks into separate memory regions
- Use arrays in SunGEMState to hold register values
- Add state-saving support
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
HMP pull 2017-09-14
# gpg: Signature made Thu 14 Sep 2017 15:57:30 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-hmp-20170914:
hmp: introduce 'info memory_size_summary' command
qmp: introduce query-memory-size-summary command
hmp: extend "info numa" with hotplugged memory information
tests/hmp: test "none" machine with memory
dump: do not dump non-existent guest memory
hmp: fix "dump-quest-memory" segfault (arm)
hmp: fix "dump-quest-memory" segfault (ppc)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It does not really make sense to dump memory that is not there.
Moreover, that fixes a segmentation fault when calling dump-guest-memory
with no filter for a machine with no memory defined.
New behaviour is:
(qemu) dump-guest-memory /dev/null
dump: no guest memory to dump
(qemu) dump-guest-memory /dev/null 0 4096
dump: no guest memory to dump
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170913142036.2469-4-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Running QEMU with
qemu-system-aarch64 -M none -nographic -m 256
and executing
dump-guest-memory /dev/null 0 8192
results in segfault
Fix by checking if we have CPU, and exit with
error if there is no CPU:
(qemu) dump-guest-memory /dev/null
this feature or command is not currently supported
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20170913142036.2469-3-lvivier@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Running QEMU with
qemu-system-ppc64 -M none -nographic -m 256
and executing
dump-guest-memory /dev/null 0 8192
results in segfault
Fix by checking if we have CPU, and exit with
error if there is no CPU:
(qemu) dump-guest-memory /dev/null
this feature or command is not currently supported
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20170913142036.2469-2-lvivier@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Nowdays we use libusb for usb-host, so we don't have different code
for linux vs. bsd any more. So there is little reason to have the
HOST_USB variable, we can just write things directly into the Makefile
and avoid a pointless indirection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20170908111217.21985-2-kraxel@redhat.com
The existing XHCI code reads the Event Ring Segment Table Base Address
Register (ERSTBA) every time when it is changed. However zero is its
default state so one would think that zero there means it is not in use.
This adds a check for ERSTBA in addition to the existing check for
the Event Ring Segment Table Size Register (ERSTSZ).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 20170911065606.40600-1-aik@ozlabs.ru
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some termcaps (found using SLES11SP1) use [? sequences. According to man
console_codes (http://linux.die.net/man/4/console_codes) the question mark
is a nop and should simply be ignored.
This patch does exactly that, rendering screen output readable when
outputting guest serial consoles to the graphical console emulator.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 20170829113818.42482-1-agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio-gpu can trigger the assert added by commit "6905b93447 console:
add same surface replace pre-condition" in multihead setups (where
surface can be NULL for secondary displays). Allow surface being NULL.
Fixes: 6905b93447
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170906142109.2685-1-kraxel@redhat.com
Remove pixman switches from configure, should not be needed any more,
configure can figure by itself whenever pixman is needed or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-3-kraxel@redhat.com
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Don't reset window layout information (passed via virtio_gpu_ui_info) on
device reset, so the user interface window layout will be kept intact
over reboots. The head size and position was commented out already, so
this patch just drops the dead code. Additionally the enabled head mask
must be kept so multihead setups work properly too.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1460595
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170906142058.2460-1-kraxel@redhat.com
GCC 4.7.2 on SunOS reports that the values assigned to array members are not
real constants:
target/m68k/fpu_helper.c:32:5: error: initializer element is not constant
target/m68k/fpu_helper.c:32:5: error: (near initialization for 'fpu_rom[0]')
rules.mak:66: recipe for target 'target/m68k/fpu_helper.o' failed
Convert the array to make_floatx80_init() to fix it.
Replace floatx80_pi-like constants with make_floatx80_init() as they are
defined as make_floatx80().
This fixes build on SmartOS (Joyent).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170904212306.3020-1-n54@gmx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
ppc patch queue 2017-09-08
This is the first batch of ppc related patches for qemu-2.11, and it's
accumulated quite a few things. Includes:
* A cleanup to handling of ppc cpu models from Igor
* First parts of fixes to handling of guest vs. host SMT modes from
Sam Bobroff
* Preliminary patches towards supporting the Sam460 board from
Balaton Zoltan
* Several fixes for hotplug logic
* Assorted other fixes and cleanups
# gpg: Signature made Fri 08 Sep 2017 06:28:42 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.11-20170908: (40 commits)
ppc: spapr: Move VCPU ID calculation into sPAPR
ppc: remove non implemented cpu models
ppc: drop caching ObjectClass from PowerPCCPUAlias
ppc: simplify cpu model lookup by PVR
ppc: replace inter-function cyclic dependency/recurssion with 2 simple lookups
ppc: make cpu alias point only to real cpu models
ppc: make cpu_model translation to type consistent
ppc: use macros to make cpu type name from string literal
target/ppc: Remove old STATUS file
PPC: KVM: Support machine option to set VSMT mode
spapr: fallback to raw mode if best compat mode cannot be set during CAS
hw/nvram/spapr_nvram: Device can not be created by the users
hw/ppc/spapr_cpu_core: Add a proper check for spapr machine
ppc4xx: Export ECB and PLB emulation
ppc4xx_i2c: Move to hw/i2c
ppc4xx_i2c: QOMify
ppc4xx: Split off 4xx I2C emulation from ppc405_uc to its own file
ppc4xx: Make MAL emulation more generic
ppc4xx: Move MAL from ppc405_uc to ppc4xx_devs
spapr_iommu: Realloc guest visible TCE table when hot(un)plugging vfio-pci
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The callback is called on select.
Furthermore, the next patch introduced a new callback, so rename the
function type with a generic name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new slot_reserved_mask bitmask to PCIBus indicating whether or not each
PCI slot on the bus is reserved. Ensure that it is initialised to zero to
maintain the existing behaviour that all slots are available by default, and
add the additional check with appropriate error reporting to
do_pci_register_device().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This compat property sole function is to prevent the device from being
instantiated. Instead of requiring an extra compat property, check if
fw_cfg has DMA enabled.
fw_cfg is a built-in device that is initialized very early by the
machine init code. We have at least one other device that also
assumes fw_cfg_find() can be safely used on realize: pvpanic.
This has the additional benefit of handling other cases properly, like:
$ qemu-system-x86_64 -device vmgenid -machine none
qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
$ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.9 -global fw_cfg.dma_enabled=off
qemu-system-x86_64: -device vmgenid: vmgenid requires DMA write support in fw_cfg, which this machine type does not provide
$ qemu-system-x86_64 -device vmgenid -machine pc-i440fx-2.6 -global fw_cfg.dma_enabled=on
[boots normally]
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Moved vmgenid from uncategorized to misc category in QEMU help menu
Signed-off-by: Yoni Bettan <ybettan@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In vtd_switch_address_space() we did the memory region switch, however
it's possible that the caller of it has not taken the BQL at all. Make
sure we have it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To enable hotplugging of a newly created pcie-pci-bridge,
we need to tell firmware (e.g. SeaBIOS) to reserve
additional buses or IO/MEM/PREF space for pcie-root-port.
Additional bus reservation allows us to hotplug pcie-pci-bridge into this root port.
The number of buses and IO/MEM/PREF space to reserve are provided to the device via
a corresponding property, and to the firmware via new PCI capability.
The properties' default values are -1 to keep default behavior unchanged.
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On PCI init PCI bridges may need some extra info about bus number,
IO, memory and prefetchable memory to reserve. QEMU can provide this
with a special vendor-specific PCI capability.
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>