Move the log_dirty check into vhost_section.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that the olf vhost_set_memory code is gone, the _nop and _add
callbacks are identical and can be merged. The _del callback is
no longer needed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove the old update mechanism, vhost_set_memory, and the functions
and flags it used.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Compare the sections list that's just been generated, and if it's
different from the old one regenerate the region list.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
As sections are reported by the listener to the _nop and _add
methods, add them to the temporary section list but now merge them
with the previous section if the new one abuts and the backend allows.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_verify_ring_mappings() were used to verify that
rings are still accessible and related memory hasn't
been moved after flatview is updated.
It was doing checks by mapping ring's GPA+len and
checking that HVA hadn't changed with new memory map.
To avoid maybe expensive mapping call, we were
identifying address range that changed and were doing
mapping only if ring was in changed range.
However it's not neccessary to perform ring's GPA
mapping as we already have its current HVA and all
we need is to verify that ring's GPA translates to
the same HVA in updated flatview.
This will allow the following patches to simplify the range
comparison that was previously needed to avoid expensive
verify_ring_mapping calls.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
with modifications by:
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor spotted that there's a race, where a region that's unref'd
in a _del callback might be free'd before the set_mem_table call in
the _commit callback, and thus the vhost might end up using free memory.
Fix this by building a complete temporary sections list, ref'ing every
section (during add and nop) and then unref'ing the whole list right
at the end of commit.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The loading time of a VM is quite significant when its virtio
devices use a large amount of virt-queues (e.g. a virtio-serial
device with max_ports=511). Most of the time is spend in the
creation of all the required event notifiers (ioeventfd and memory
regions).
This patch pack all the changes to the memory regions in a
single memory transaction.
Reported-by: Sitong Liu
Reported-by: Xiaoling Gao
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
The virtio_bus_set_host_notifier function no longer calls
event_notifier_cleanup when a event notifier is removed.
The commit updates the code to match the new behavior and calls
virtio_bus_cleanup_host_notifier after the notifier was de-assign
and no longer in use.
This change is a preparation to allow executing the
virtio_bus_set_host_notifier function in a memory region
transaction.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 0750b06021.
Follow up patches are reworking the memory listeners, the new mechanism
will add its own set of traces.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To make our efforts on QEMU testing easier to consume by contributors,
let's add a document. For example, Patchew reports build errors on
patches that should be relatively easy to reproduce with a few steps, and
it is much nicer if there is such a documentation that it can refer to.
This focuses on how to run existing tests and how to write new test
cases, without going into the frameworks themselves.
The VM based testing section is moved from tests/vm/README which now
is a single line pointing to the new doc.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180201022046.9425-1-famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is a new protocol driver that exclusively opens a host NVMe
controller through VFIO. It achieves better latency than linux-aio by
completely bypassing host kernel vfs/block layer.
$rw-$bs-$iodepth linux-aio nvme://
----------------------------------------
randread-4k-1 10.5k 21.6k
randread-512k-1 745 1591
randwrite-4k-1 30.7k 37.0k
randwrite-512k-1 1945 1980
(unit: IOPS)
The driver also integrates with the polling mechanism of iothread.
This patch is co-authored by Paolo and me.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20180116060901.17413-4-famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Now that CoQueues can use a QemuMutex for thread-safety, there is no
need for curl to roll its own coroutine queue. Coroutines can be
placed directly on the queue instead of using a list of CURLAIOCBs.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180203153935.8056-6-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
qemu_co_queue_next does not need to release and re-acquire the mutex,
because the queued coroutine does not run immediately. However, this
does not hold for qemu_co_enter_next. Now that qemu_co_queue_wait
can synchronize (via QemuLockable) with code that is not running in
coroutine context, it's important that code using qemu_co_enter_next
can easily use a standardized locking idiom.
First of all, qemu_co_enter_next must use aio_co_wake to restart the
coroutine. Second, the function gains a second argument, a QemuLockable*,
and the comments of qemu_co_queue_next and qemu_co_queue_restart_all
are adjusted to clarify the difference.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180203153935.8056-5-pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
There are cases in which a queued coroutine must be restarted from
non-coroutine context (with qemu_co_enter_next). In this cases,
qemu_co_enter_next also needs to be thread-safe, but it cannot use
a CoMutex and so cannot qemu_co_queue_wait. Use QemuLockable so
that the CoQueue can interchangeably use CoMutex or QemuMutex.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180203153935.8056-4-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
QemuLockable is a polymorphic lock type that takes an object and
knows which function to use for locking and unlocking. The
implementation could use C11 _Generic, but since the support is
not very widespread I am instead using __builtin_choose_expr and
__builtin_types_compatible_p, which are already used by
include/qemu/atomic.h.
QemuLockable can be used to implement lock guards, or to pass around
a lock in such a way that a function can release it and re-acquire it.
The next patch will do this for CoQueue.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180203153935.8056-3-pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Using "fedora:latest" makes behavior different depending on when you
actually pulled the image from the docker repository. In my case,
the supposedly "latest" image was a Fedora 25 download from 8 months
ago, and the new "test-debug" test was failing.
Use "27" to improve reproducibility and make it clear when the image
is obsolete.
Cc: Fam Zheng <famz@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1515755504-21341-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Implements the Windows Hypervisor Platform accelerator (WHPX) target. Which
acts as a hypervisor accelerator for QEMU on the Windows platform. This enables
QEMU much greater speed over the emulated x86_64 path's that are taken on
Windows today.
1. Adds support for vPartition management.
2. Adds support for vCPU management.
3. Adds support for MMIO/PortIO.
4. Registers the WHPX ACCEL_CLASS.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1516655269-1785-4-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we have separate handler on POLLHUP, which drops data
after closing the connection we need to fix this test, because
it sends data and instantly close the socket creating race condition.
In some cases on other end of socket client closes it faster than
reads data. To prevent it I suggest to close socket after recieving.
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Message-Id: <20180201134831.17709-1-klim.kireev@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will exercise the memfd memory backend and should generally be
better for testing than memory-backend-file (thanks to anonymous files
and sealing).
If memfd is available, it is preferred.
However, in order to check that file & memfd backends both work
correctly, the read-guest-mem test is checked explicitly for each.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180201132757.23063-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new memory backend, similar to hostmem-file, except that it
doesn't need to create files. It also enforces memory sealing.
This backend is mainly useful for sharing the memory with other
processes.
Note that Linux supports transparent huge-pages of shmem/memfd memory
since 4.8. It is relatively easier to set up THP than a dedicate
hugepage mount point by using "madvise" in
/sys/kernel/mm/transparent_hugepage/shmem_enabled.
Since 4.14, memfd allows to set hugetlb requirement explicitly.
Pending for merge in 4.16 is memfd sealing support for hugetlb backed
memory.
Usage:
-object memory-backend-memfd,id=mem1,size=1G
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180201132757.23063-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux commit 749df87bd7bee5a79cef073f5d032ddb2b211de8 (v4.14-rc1)
added a new flag MFD_HUGETLB to memfd_create() that specify the file
to be created resides in the hugetlbfs filesystem. This is the
generic hugetlbfs filesystem not associated with any specific mount
point.
hugetlbfs does not support sealing operations in v4.14, therefore
specifying MFD_ALLOW_SEALING with MFD_HUGETLB will result in EINVAL.
However, I added sealing support in "[PATCH v3 0/9] memfd: add sealing
to hugetlb-backed memory" series, queued in -mm tree for v4.16.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180201132757.23063-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If no one joins the thread, its associated memory is leaked.
Reported-by: CheneyLin <linzc@zju.edu.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dr. David Alan Gilbert