AST1030 integrates one set of Parallel GPIO Controller
with maximum 151 control pins, which are 21 groups
(A~U, exclude pin: M6 M7 Q5 Q6 Q7 R0 R1 R4 R5 R6 R7 S0 S3 S4
S5 S6 S7 ) and the group T and U are input only.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220525053444.27228-3-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Background:
AspeedMachineClass.uart_default specifies the serial console UART, which
usually corresponds to the "stdout-path" in the device tree.
The default value is UART5, since most boards use UART5 for this:
amc->uart_default = ASPEED_DEV_UART5;
Users can override AspeedMachineClass.uart_default in their board's machine
class init to specify something besides UART5. For example, for fuji-bmc:
amc->uart_default = ASPEED_DEV_UART1;
We only connect this one UART, of the 5 UART's on the AST2400 and AST2500
and the 13 UART's on the AST2600 and AST1030, to a serial device that QEMU
users can use. None of the other UART's are initialized, and the only way
to override this attribute is by creating a specialized board definition,
requiring QEMU source code changes and rebuilding.
The result of this is that if you want to get serial console output on a
board that uses UART3, you need to add a board definition. This was
encountered by Zev in OpenBMC. [1]
Changes:
This commit initializes all of the UART's present on each Aspeed chip with
serial devices and allows the QEMU user to connect as many or few as they
like to serial devices. For example, you can still run QEMU and just connect
stdout to the machine's default UART, without specifying any additional
serial devices:
qemu-system-arm -machine fuji-bmc \
-drive file=fuji.mtd,format=raw,if=mtd \
-nographic
However, if you don't want to add a special machine definition, you can now
manually configure UART1 to connect to stdout and get serial console output,
even if the machine's default is UART5:
qemu-system-arm -machine ast2600-evb \
-drive file=fuji.mtd,format=raw,if=mtd \
-serial null -serial mon:stdio -display none
In the example above, the first "-serial null" argument is connected to
UART5, and "-serial mon:stdio" is connected to UART1.
Another example: you can get serial console output from Wedge100, which uses
UART3, by reusing the palmetto AST2400 machine and rewiring the serial
device arguments:
qemu-system-arm -machine palmetto-bmc \
-drive file=wedge100.mtd,format=raw,if=mtd \
-serial null -serial null -serial null \
-serial mon:stdio -display none
There is a slight change in behavior introduced with this change: now, each
UART's memory-mapped IO region will have a serial device model connected to
it. Previously, all reads and writes to those regions would be ineffective
and return zero values, but now some values will be nonzero, even when the
user doesn't connect a serial device backend (like a socket, file, etc). For
example, the line status register might indicate that the transmit buffer is
empty now, whereas previously it might have always indicated it was full.
[1] https://lore.kernel.org/openbmc/YnzGnWjkYdMUUNyM@hatter.bewilderbeest.net/
[2] https://github.com/facebook/openbmc/releases/download/v2021.49.0/fuji.mtd
[3] https://github.com/facebook/openbmc/releases/download/v2021.49.0/wedge100.mtd
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-6-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The AST1030 machine initialization was not respecting the Aspeed SoC
property "uart-default", which specifies which UART should be connected to
the first serial device, it was just always connecting UART5. This doesn't
change any behavior, because the default value for "uart-default" is UART5,
but it makes it possible to override this in new machine definitions using
the AST1030.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-4-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This adds the missing UART memory and IRQ mappings for the AST2400, AST2500,
AST2600, and AST1030.
This also includes the new UART interfaces added in the AST2600 and AST1030
from UART6 to UART13. The addresses and interrupt numbers for these two
later chips are identical.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220516062328.298336-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Third RISC-V PR for QEMU 7.1
* Fixes for accessing VS hypervisor CSRs
* Improvements for RISC-V Vector extension
* Fixes for accessing mtimecmp
* Add new short-isa-string CPU option
* Improvements to RISC-V machine error handling
* Disable the "G" extension by default internally, no functional change
* Enforce floating point extension requirements
* Cleanup ISA extension checks
* Resolve redundant property accessors
* Fix typo of mimpid cpu option
* Improvements for virtulisation
* Add zicsr/zifencei to isa_string
* Support for VxWorks uImage
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmKNX4sACgkQIeENKd+X
# cFRikQgAqdRtGCj9XidnHV7QJkUkckmbqp8ZLwxo3PnoNkKirO8muXlo5jt9veyz
# LGn5nx6rmKX4fjs6CAQ+pNR2Pw2qFfrQiEpQXEhK6Zg6jh576qscqgwhX9JVSmrN
# is7nxpG1J/ZtMzO70DfgzmHO8Ykf+Ca6PNM/4kBftmqsPYjD5nUu/o9RJ98jgpem
# lI3U7sHx9xdoIBUVZO6CwRpmovTAvhz7usRbtKVTSXi7+IElFweyFacxT5X5xvgm
# Wj0GhQaeOYy7sww5XfXClQCeJXJS77ZQiPIaiT0W8vKs5dhY3Eux3zqqt9hWChny
# 0vFoYwHnYS5y8cy56IKeeg0/jnZq+A==
# =NiH/
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 24 May 2022 03:43:23 PM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20220525' of github.com:alistair23/qemu: (23 commits)
hw/core: loader: Set is_linux to true for VxWorks uImage
hw/core: Sync uboot_image.h from U-Boot v2022.01
target/riscv: add zicsr/zifencei to isa_string
hw/riscv: virt: Fix interrupt parent for dynamic platform devices
target/riscv: Set [m|s]tval for both illegal and virtual instruction traps
target/riscv: Fix hstatus.GVA bit setting for traps taken from HS-mode
target/riscv: Fix csr number based privilege checking
target/riscv: Fix typo of mimpid cpu option
target/riscv: check 'I' and 'E' after checking 'G' in riscv_cpu_realize
hw/riscv/sifive_u: Resolve redundant property accessors
hw/vfio/pci-quirks: Resolve redundant property getters
target/riscv: Move/refactor ISA extension checks
target/riscv: FP extension requirements
target/riscv: Change "G" expansion
target/riscv: Disable "G" by default
target/riscv: Fix coding style on "G" expansion
hw/riscv: Make CPU config error handling generous (sifive_e/u/opentitan)
hw/riscv: Make CPU config error handling generous (virt/spike)
target/riscv: Add short-isa-string option
target/riscv: Move Zhinx* extensions on ISA string
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Zicsr/Zifencei is not in 'I' since ISA version 20190608,
thus to fully express the capability of the CPU,
they should be exposed in isa_string.
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Tested-by: Jiatai He <jiatai2021@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <YoTqwpfrodveJ7CR@Sun>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When both APLIC and IMSIC are present in virt machine, the APLIC should
be used as parent interrupt controller for dynamic platform devices.
In case of multiple sockets, we should prefer interrupt controller of
socket0 for dynamic platform devices.
Fixes: 3029fab643 ("hw/riscv: virt: Add support for generating
platform FDT entries")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-9-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the [m|s]tval CSRs are set with trapping instruction encoding
only for illegal instruction traps taken at the time of instruction
decoding.
In RISC-V world, a valid instructions might also trap as illegal or
virtual instruction based to trapping bits in various CSRs (such as
mstatus.TVM or hstatus.VTVM).
We improve setting of [m|s]tval CSRs for all types of illegal and
virtual instruction traps.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-4-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, QEMU does not set hstatus.GVA bit for traps taken from
HS-mode into HS-mode which breaks the Xvisor nested MMU test suite
on QEMU. This was working previously.
This patch updates riscv_cpu_do_interrupt() to fix the above issue.
Fixes: 86d0c45739 ("target/riscv: Fixup setting GVA")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU allowed inconsistent configurations that made floating point
arithmetic effectively unusable.
This commit adds certain checks for consistent FP arithmetic:
- F requires Zicsr
- Zfinx requires Zicsr
- Zfh/Zfhmin require F
- D requires F
- V requires D
Because F/D/Zicsr are enabled by default (and an error will not occur unless
we manually disable one or more of prerequisites), this commit just enforces
the user to give consistent combinations.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <00e7b1c6060dab32ac7d49813b1ca84d3eb63298.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
sifive_e/u and opentitan machines. It now just prints error message and
quits (without coredumps and aborts).
This is separate from spike/virt because it involves different type
(TYPE_RISCV_HART_ARRAY) on sifive_e/u and opentitan machines.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <09e61e58a7543da44bdb0e0f5368afc8903b4aa6.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
virt/spike machines. It now just prints error message and quits (without
coredumps and aborts).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d17381d3ea4992808cf1894f379ca67220f61b45.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because some operating systems don't correctly parse long ISA extension
string, this commit adds short-isa-string boolean option to disable
generating long ISA extension strings on Device Tree.
For instance, enabling Zfinx and Zdinx extensions and booting Linux (5.17 or
earlier) with FPU support caused a kernel panic.
Operating Systems which short-isa-string might be helpful:
1. Linux (5.17 or earlier)
2. FreeBSD (at least 14.0-CURRENT)
3. OpenBSD (at least current development version)
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7c1fe5f06b0a7646a47e9bcdddb1042bb60c69c8.1652181972.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
VS mode access to hypervisor CSRs should generate virtual, not illegal,
instruction exceptions.
Don't return early and indicate an illegal instruction exception when
accessing a hypervisor CSR from VS mode. Instead, fall through to the
`hmode` predicate to return the correct virtual instruction exception.
Signed-off-by: Dylan Reid <dgreid@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220506165456.297058-1-dgreid@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
clang-built s390x branch-relative-long test fails on clang-built s390x
QEMU due to the following sequence of events:
- The test zeroes out a code page, clang generates exrl+xc for this.
- do_helper_xc() is called. Clang generates exrl+xc there as well.
- Since there already exists a TB for the code in question, its page is
read-only and SIGSEGV is raised.
- host_signal_handler() calls host_signal_write() and the latter does
not recognize exrl as a write. Therefore page_unprotect() is not
called and the signal is forwarded to the test.
Fix by treating EXRL (and EX, just in case) as writes. There may be
false positives, but they will lead only to an extra page_unprotect()
call.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504114819.1729737-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 31330e6cec ("linux-user/s390x: Implement setup_sigtramp")
removed an unused field from rt_sigframe, disturbing offsets of other
fields and breaking unwinding from signal handlers (e.g. libgcc's
s390_fallback_frame() relies on this struct having a specific layout).
Restore the field and add a comment.
Reported-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Fixes: 31330e6cec ("linux-user/s390x: Implement setup_sigtramp")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220503225157.1696774-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Prior to the introduction of the prealloc-threads property, the amount
of threads used to preallocate memory was derived from the value of
smp-cpus passed to qemu, the amount of physical cpus of the host
and a hardcoded maximum value. When the prealloc-threads property
was introduced, it included a default of 1 in backends/hostmem.c and
a default of smp-cpus using the sugar API for the property itself. The
latter default is not used when the property is not specified on qemu's
command line, so guests that were not adjusted for this change suddenly
started to use the default of 1 thread to preallocate memory, which
resulted in observable slowdowns in guest boots for guests with large
memory (e.g. when using libvirt <8.2.0 or managing guests manually).
This commit restores the original behavior for these cases while not
impacting guests started with the prealloc-threads property in any way.
Fixes: 220c1fd864e9d ("hostmem: introduce "prealloc-threads" property")
Signed-off-by: Jaroslav Jindrak <dzejrou@gmail.com>
Message-Id: <20220517123858.7933-1-dzejrou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Konstantin Kostiuk