U-Boot queries the FIFO water level to reduce checking status register
when doing PIO SD card operation.
Report a FIFO water level of 1 when data is ready, to prevent the code
from trying to read 0 words from the FIFO each time.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Message-id: 20220520124200.2112699-1-uwu@icenowy.me
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix when building HVF on macOS Aarch64:
target/arm/hvf/hvf.c:586:15: error: unknown type name 'ARMCPRegInfo'; did you mean 'ARMCPUInfo'?
const ARMCPRegInfo *ri;
^~~~~~~~~~~~
ARMCPUInfo
target/arm/cpu-qom.h:38:3: note: 'ARMCPUInfo' declared here
} ARMCPUInfo;
^
target/arm/hvf/hvf.c:589:14: error: implicit declaration of function 'get_arm_cp_reginfo' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
ri = get_arm_cp_reginfo(arm_cpu->cp_regs, key);
^
target/arm/hvf/hvf.c:589:12: warning: incompatible integer to pointer conversion assigning to 'const ARMCPUInfo *' (aka 'const struct ARMCPUInfo *') from 'int' [-Wint-conversion]
ri = get_arm_cp_reginfo(arm_cpu->cp_regs, key);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
target/arm/hvf/hvf.c:591:26: error: no member named 'type' in 'struct ARMCPUInfo'
assert(!(ri->type & ARM_CP_NO_RAW));
~~ ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/assert.h:99:25: note: expanded from macro 'assert'
(__builtin_expect(!(e), 0) ? __assert_rtn(__func__, __ASSERT_FILE_NAME, __LINE__, #e) : (void)0)
^
target/arm/hvf/hvf.c:591:33: error: use of undeclared identifier 'ARM_CP_NO_RAW'
assert(!(ri->type & ARM_CP_NO_RAW));
^
1 warning and 4 errors generated.
Fixes: cf7c6d1004 ("target/arm: Split out cpregs.h")
Reported-by: Duncan Bayne <duncan@bayne.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220525161926.34233-1-philmd@fungible.com
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1029
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hppa: Fix serial port pass-through
This series fixes the SeaBIOS-hppa firmware and the serial ports setup code in
qemu so that it reflects the real hardware and allows serial port pass-through
from the host to guests.
Tested with Linux guests.
v2: Changes suggested by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
- Split out hppa_hardware.h restoration to an own patch
- Drop unneccesary checks for serial_hd(x)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYpH5NAAKCRD3ErUQojoP
# X0p3APsHdN4SDIVHJ3vjfzrvmuJ8rEUzsK4COdlgWBUT4jgVBgEApk9jj6X0ZfkI
# bUVVQAOqHZbgXhEeiHNVWbsPfEqsqQw=
# =aj8q
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 28 May 2022 03:28:04 AM PDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-serial-fix-pull-request' of https://github.com/hdeller/qemu-hppa:
hppa: Fix serial port assignments and pass-through
hppa: Sync contents of hppa_hardware.h header file with SeaBIOS-hppa
New SeaBIOS-hppa version 6
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes the serial ports in the emulation to behave as on original
hardware.
On the real hardware, the LASI UART is serial port #0 and the DINO UART
is serial port #1. This is fixed in SeaBIOS-hppa firmware v6, which is
why at least this firmware version is required.
The serial port addresses in hppa/hppa_hardware.h have to be swapped,
and when creating the virtual serial ports the correct port addresses
are used.
This patch now for example allows to specify on the qemu command line:
-serial mon:stdio -serial /dev/ttyS4
to use the emulated ttyS0 in the guest for console output, and pass
ttyS4 from the host to ttyS1 in the guest.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The hppa_hardware.h header file holds many constants for addresses and
offsets which are needed while building the firmware (SeaBIOS-hppa) and
while setting up the virtual machine in QEMU.
That's why this header file needs to be in sync between both source code
repositories. This patch adds a comment mentioning this dependency at
the top of this file and restores some DINO relevant offsets.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
qemu_open_old() uses qemu_open_internal() which handles special
"/dev/fdset/" path for monitor fd sets, set CLOEXEC, and uses Error
reporting (and some O_DIRECT special error casing).
The monitor fdset handling is unnecessary for qga, use
qga_open_cloexec() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-9-marcandre.lureau@redhat.com>
QGA calls qemu_open_old() in various places. Calling qemu_open() instead
isn't a great alternative, as it has special "/dev/fdset" handling and
depends on QEMU internal monitor data structures.
Instead, provide a simple helper for QGA needs, with Error* support. The
following patches will make use of it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-6-marcandre.lureau@redhat.com>
ppc patch queue for 2022-05-26:
Most of the changes are enhancements/fixes made in TCG ppc emulation
code. Several bugs fixes were made across the board as well.
Changes include:
- tcg and target/ppc: VSX MMA implementation, fixes in helper
declarations to use call flags, memory ordering, tlbie and others
- pseries: fixed stdout-path setting with -machine graphics=off
- pseries: allow use of elf parser for kernel address
- other assorted fixes and improvements
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYo/yvgAKCRA82cqW3gMx
# ZMeRAQCWmqz4OyiJ9mjENYT8eIgIQWo9RzhFe4nNAaOqrNei/gD7Bx1Ut4qsLY9Z
# 30wMgf/t89dXLW66zaZO+mCvEMHPsgw=
# =U8gx
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 26 May 2022 02:35:58 PM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220526' of https://gitlab.com/danielhb/qemu: (34 commits)
linux-user: Add PowerPC ISA 3.1 and MMA to hwcap
target/ppc: Implemented [pm]xvbf16ger2*
target/ppc: Implemented pmxvf*ger*
target/ppc: Implemented xvf16ger*
target/ppc: Implemented xvf*ger*
target/ppc: Implemented pmxvi*ger* instructions
target/ppc: Implemented xvi*ger* instructions
target/ppc: Implement xxm[tf]acc and xxsetaccz
target/ppc: Implement lwsync with weaker memory ordering
tcg/ppc: Optimize memory ordering generation with lwsync
tcg/ppc: ST_ST memory ordering is not provided with eieio
target/ppc: Fix eieio memory ordering semantics
target/ppc: declare vmsumsh[ms] helper with call flags
target/ppc: declare vmsumuh[ms] helper with call flags
target/ppc: declare vmsum[um]bm helpers with call flags
target/ppc: introduce do_va_helper
target/ppc: declare xxextractuw and xxinsertw helpers with call flags
target/ppc: declare xvxsigsp helper with call flags
target/ppc: declare xscvspdpn helper with call flags
target/ppc: Use TCG_CALL_NO_RWG_SE in fsel helper
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the following PowerISA v3.1 instructions:
xxmfacc: VSX Move From Accumulator
xxmtacc: VSX Move To Accumulator
xxsetaccz: VSX Set Accumulator to Zero
The PowerISA 3.1 mentions that for the current version of the
architecture, "the hardware implementation provides the effect of ACC[i]
and VSRs 4*i to 4*i + 3 logically containing the same data" and "The
Accumulators introduce no new logical state at this time" (page 501).
For now it seems unnecessary to create new structures, so this patch
just uses ACC[i] as VSRs 4*i to 4*i+3 and therefore move to and from
accumulators are no-ops.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524140537.27451-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The generated eieio memory ordering semantics do not match the
instruction definition in the architecture. Add a big comment to
explain this strange instruction and correct the memory ordering
behaviour.
Signed-off: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Richard Henderson