Sideload builds used to dlopen a bundled libMoltenVK.dylib, which was
only worth having while they could still fall back to OpenGL. Now both
variants link the static MoltenVK from ios/MoltenVK and call Vulkan
directly. PPSSPP_VK_STATIC replaces the IOS_APP_STORE checks in the
Vulkan loader (the iOS libretro core still loads at runtime).
The static MoltenVK needs iOS 15.0, so that's now the deployment target
for all iOS builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The app now always uses the Metal view controller with Vulkan (MoltenVK),
for both the App Store and sideload builds. The GL view controller is gone,
and Common/GPU/OpenGL (except GLFeatures, used by the shader generators) and
GPU/GLES are no longer compiled for it. PPSSPP_API_ANY_GL is now off for
all of iOS except the libretro core, which still uses GLES.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Now that EGL is ours rather than GLSurfaceView's, the swap interval can be set,
so turning vsync off (and fast-forward without skipping flips) works on Android
GL too. Not in VR, where OpenXR presents, and not with a config whose minimum
swap interval is 1.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
MoltenVK doesn't support a sampler mipLodBias (the portability subset's
samplerMipLodBias is false), so the PSP's LOD bias did nothing on Mac and
iOS, and biased textures came out a mip level blurrier than on OpenGL and
the PSP: MLB's signs and crowd, Burnout Legends, MediEvil, Ridge Racer 2.
Query the portability subset, and where the bias is missing, pass the auto
mode bias to texture() from a uniform instead.
VK_ENABLE_BETA_EXTENSIONS, which declares the portability subset, is now
defined for App Store iOS builds too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It needs GL 4.3 or GLES 3.1. On Apple's GL 4.1 every depth texture bind (Cars
Race-O-Rama's depal from depth, for one) raised GL_INVALID_ENUM, which then
showed up at whatever checked glGetError next. Without the mode a
depth-stencil texture samples depth, so nothing else changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
GLRFramebuffer's destructor binds the default framebuffer, while the queue
runner's cache still had the previous one as bound. A following readback from
that framebuffer skipped the bind and read the default framebuffer instead.
Cars Race-O-Rama and MX vs ATV Reflex recreate framebuffers every few frames,
so their luminance readback came back as zeros on about half the frames and
their brightness adaptation went wrong on GL. Now GL reads the same values as
Vulkan.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With MSAA, a framebuffer textured as CLUT indices was read resolved, so the
indices along edges were averages of the samples and looked up wrong colors.
Dragon Ball Z: Tenkaichi Tag Team draws its outlines from a CLUT32 lookup of
its framebuffer, and they came out noisy and miscolored. Copy each pixel's
first sample with texelFetch into a temporary buffer and look up that.
This needs the multisampled color images to be sampled, and transitioned
back to attachment layout before rendering to them again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The GE's blend terms are floor((2c+1)(2f+1)/1024), which truncates, while the
hardware multiplies by f/255 and rounds, so every pass of a fixed color blend
chain came out up to a level brighter. God Eater Burst's bloom is many such
passes and ended up far too bright.
For additive FIXA/FIXB blends that aren't just 0 and 0xFFFFFF, the shader
now computes the src term exactly and lowers it by 0.5 - (2B+1)/1024, and the
blend constant is the GE's dst factor (2B+1)/512, so the hardware's rounding
of the sum lands on the GE's floor (except where the src term would go below
zero). Blend constants are passed as floats to make that possible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
InitSwapchain deliberately refuses the 270 degree pre-transform. The driver
then reports VK_SUBOPTIMAL_KHR on every present, which we counted towards
recreating the swapchain - and the new one got the same treatment, so in
reverse landscape we rebuilt it every single frame.
Remember that the mismatch is ours and stop treating SUBOPTIMAL as a reason
to recreate when it is. Any other cause still counts.
Split out of the Android rotation work, where it was found: it's a
platform-independent Vulkan fix and stands on its own.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01152igCdjTNhT29qvphPyPC
The EGL path from the previous commit is now the only one, so GLSurfaceView
and everything that existed to serve it are gone:
- NativeRenderer.java and NativeGLSurfaceView.java, deleted.
- The javaGL branches in PpssppActivity. GL and Vulkan now share one
lifecycle: a plain SurfaceView, startRenderLoopThread() when the surface
arrives, joinRenderLoopThread() when it goes away.
- The "androidJavaGL" queryConfig, and the AndroidNativeEGL setting and its
developer-tools checkbox.
- displayInit/displayRender, and with them the "Second time, joining the
emuthread and starting it up again" dance - restarting the emu thread from
inside a JNI callback because a lost context was only observable as a
second onSurfaceCreated.
- GraphicsContext::NotifyContextLost, which existed solely because that join
drained the render queue on a thread with no current context. The render
thread now joins the emu thread with the context still current, so the
drain is real work and nothing has to be skipped.
- g_emuThread, now that nothing starts an emu thread outside the render loop.
Three things displayInit/displayRender did that nothing else did, moved
rather than dropped:
- EnterVR and the per-frame StartVRRender/UpdateVRInput/FinishVRRender hooks
now live in RenderLoopThread's GL branch. Java's GL thread could simply
return early and wait for the next vsync when the VR session was inactive;
this loop drives itself, so that case sleeps 16ms instead of spinning.
Not tested - no headset here.
- RECREATE_VIEWS after the emu thread starts, as before. Vulkan never did
this, so it's a candidate for removal when the two paths converge.
- The thin3d error callback, which surfaces GL errors as OSD messages. That
one moved into AndroidEGLGraphicsContext::InitSurface, next to the rest of
the context's own setup, matching WindowsGLContext.
Tested on a nubia Z2464N (Unisoc UMS9632, Mali-G57, Android 15): cold start,
UI, booting a homebrew, backgrounding and resuming both in the menu and
in-game, and a density change, which destroys and recreates the activity the
way a rotation does. Every cycle tears the EGL context down and builds a new
one, and the renderer comes back with FBOs and textures intact. The config
ladder's first choice, RGBA8888 D24S8, is what the Java chooser landed on
here too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01152igCdjTNhT29qvphPyPC
First step towards removing JavaGL. The point isn't EGL itself - it's who
owns the render thread. With GLSurfaceView, Java creates the thread and the
context and calls us back, so a lost context is only observable after the
fact as a second onSurfaceCreated. That's what forces displayInit to tear
down and restart the emu thread from inside a JNI callback, and to call
NotifyContextLost first because the queue is about to be drained on a thread
with no context. None of that is needed when we own EGL: the render thread
joins the emu thread itself, with the context still current, so the drain is
real work rather than something to skip.
AndroidEGLGraphicsContext subclasses OpenGLGraphicsContext (whose own
InitSurface assumes someone else already made a context current) and adds
display/config/surface/context plus a swap function. With it, GL reuses the
Vulkan lifecycle wholesale: queryConfig("androidJavaGL") returns false, so
Java builds a plain SurfaceView and starts the native render loop when a
surface arrives - including all of the surface/pause ordering fixes from the
previous branch. runVulkanRenderLoop/requestExitVulkanRenderLoop are now
runRenderLoop/requestExitRenderLoop and serve both backends; the thread they
spawn branches on NeedsSeparateEmuThread, because the two backends split the
work in opposite directions (Vulkan: this thread is the main loop and the
render manager spawns the render thread; GL: this thread *is* the render
thread and spawns the emu thread).
Deliberately a port, not an improvement:
- GLES client version still follows NativeRenderer - 3 for VR, 2 otherwise.
Not a cap; GLES3 is detected from GL_VERSION at runtime.
- No swap-interval function. GLSurfaceView gave us no way to set one, so
PresentMode::IMMEDIATE has always been ignored here, and honoring it now
would be a behavior change. Worth revisiting once this path is the only one.
The config ladder does take the user's word that Mali 400 and the Xperia Play
are no longer a factor: it asks for RGBA8888/D24S8 and falls back twice,
rather than reproducing GLSurfaceView's ask-for-nothing default that the
comments in PpssppActivity.onCreate exist to explain. ANativeWindow's format
is set from EGL_NATIVE_VISUAL_ID, which is the proper fix for the EGL_BAD_MATCH
those comments describe.
Off by default, behind Developer tools / Graphics / "Use native EGL instead
of GLSurfaceView" (OpenGL backend, Android only). Needs an app restart, since
the context is chosen in NativeApp.init.
Builds for arm64-v8a and on Windows; NOT yet run on a device.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01152igCdjTNhT29qvphPyPC
Apple's OpenGL runs on Metal, which has no logic ops, and ignores glLogicOp.
Emulate them in the shader like MoltenVK does, which fixes OutRun's water
(without the BlueToAlpha compat flag) on macOS.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
glBlitFramebuffer obeys the scissor test, which stays enabled between render
passes with the last pass's rectangle. Resizing a framebuffer after drawing to
a small one copied only that corner, so FF Type-0's battle screen turned into
the red overlay. Disable it around the blit and restore it.
Also fixes Assassin's Creed Bloodlines, Split/Second, Super Stardust's bloom
and MotorStorm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PreprocessSteps moved the clear of an empty clear pass into the next render
pass on the same framebuffer, stopping only at copies out of it. Resizing a
framebuffer clears the new one, copies the old contents in, then renders, so
the clear landed after the copy and wiped it. Stop at any copy, blit or
readback that touches the framebuffer.
Fixes black or missing layers in Asphalt Urban GT 2, FF Type-0, Street Riders,
Kurohyou, Split/Second and Super Stardust.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EmuThread_Join drains the render queue on the calling thread. On Android
that is either the UI thread with no GL context (NativeApp.shutdown), or
the GL thread with a brand new context after the old one was lost
(displayInit the second time). The skip flag was only set once the emu
thread reached NativeShutdownGraphics, so everything queued before that
ran for real, against nothing or against the wrong context.
Add GraphicsContext::NotifyContextLost() and call it before the join in
both places. skipGLCalls_ is now atomic, since it's set from one thread
and read from another.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
If InitSurface failed, the thread returned but stayed joinable, so the next
surface was refused as "Already running" until the next pause. Tell a live
thread from a finished one with renderLoopRunning, and reap the latter.
Also make VulkanGraphicsContext::InitSurface clean up when it fails after
creating the draw context. Callers don't call ShutdownSurface on failure,
so draw_ (with its render manager) and the surface leaked, and the next
attempt overwrote the pointer.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Read as an integer, a float's bits are its log2 with the mantissa a
straight line between powers of two, scaled by 2^23, and writing an
integer back is the matching exp2. That's exactly the GE's
approximation, without log2/exp2/floor. pspPow now also returns 1 for
e <= 0 itself, so the callers drop their checks. Shader languages
without integers fall back to a true pow.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Pipelines still in the compile queue weren't in flight yet, so the
shader cache load could stop waiting (and the spinner) early.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
There's no swapchain, so reading the backbuffer asserted. Fail the
readback, and have gpu.buffer.screenshot fall back to the displayed
framebuffer.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
These own GPU objects, memory or refcounts in their destructors (or assert
there that they were torn down), so a copy would double-free. Nothing copies
them today; this keeps it that way. The manager base classes cover every
backend's subclass.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- The texture and fragment test caches dropped their GLRTexture objects on
DeviceLost without queueing them for deletion, leaking them on every
Android background/resume. The deleter already skips the GL calls when
the context is gone.
- GLRenderManager::ThreadEnd cleared unsubmitted init and render steps
without freeing the data they own. Run them through the dry run instead,
which now also frees stereo matrices and shader code.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
GLSLtoSPV takes an optional SPIRVCache, keyed on a 32-bit hash of the
source, stage and variant, plus the source length. A changed shader
simply misses. thin3d's shaders and the other fixed ones use a global
cache in PSP/SYSTEM/CACHE/vulkan_spirv.cache, loaded on first use and
saved after graphics init, when a game's cache is saved, and at
shutdown; it's flushed once it reaches 32 entries, about twice what a
session compiles, so outdated ones don't pile up. Game shaders keep
theirs in the .vkshadercache, ahead of the shader IDs so that the
compiles on load find it (version 60), and only what the session used
is saved.
A cold glslang costs about 40ms before its first shader here, and
0.3-0.9ms per shader after that.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Executables outside a bundle (headless) found no Vulkan library. Also try
the app bundle built next to them, the Vulkan SDK's install and Homebrew's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A frame that never draws to the backbuffer never acquires an image, but
its final submit still waited on the acquire semaphore, which nothing
signals, hanging the GPU. Skip the swap for such frames when finishing
them. This replaces the check for a frame with no steps at all, which
could also set it partway through a frame that acquires later.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
For when there's nothing to present to. Instead of a surface and swapchain,
it renders into images of its own through the VulkanPresentation interface
libretro uses, picking the graphics queue without a surface. Acquiring and
presenting signal and wait on the frame's semaphores with empty submits.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
DrawEngineGLES already knows that every index it generates is below the
decoded/transformed vertex count, but only passed the count to
glDrawElements. Drivers that need the vertex range before vertex
shading, like Mesa's Panfrost, then scan the index data on the CPU for
every draw, and their min/max caches can't help since the index push
buffer is rewritten every frame.
Only used for single-instance draws on desktop GL or GLES3, and only
when the caller provides the range, so other DrawIndexed callers are
unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The name and value columns were hardcoded at x=17 and x=77. The control has
a fixed width in the dialog and can not be widened, so the 8 hex digits of a
GPR only just fit - and once the register list got a vertical scrollbar, the
~17px it takes off the client width pushed the last digits off the edge.
Derive the value column from the client width each paint instead, pulling it
in far enough for a whole value to fit and clipping anything longer rather
than letting it spill. Same for the category tab labels.
Float registers print with %g rather than %f: in a column that narrow, a
clipped %f of a large value is worse than useless (1e20 would read as
100000000), while %g keeps six significant digits and stays short for the
values you normally see.
imgui 1.92 hands the backend a list of dirty rectangles when its font atlas
grows, but thin3d could only replace a whole mip level, so every new glyph
re-uploaded the entire atlas.
Adds DrawContext::UpdateTextureRegions, taking a batch of regions so each
backend can submit them together:
- Vulkan: packs the regions into the push pool and issues a single
vkCmdCopyBufferToImage from the init command buffer, transitioning only
the level being written.
- OpenGL: new TEXTURE_SUBIMAGE init step. The existing sub-image path is a
render command needing an active render pass and a texture slot, which
doesn't fit here. Rows are packed caller-side since GLES2 lacks
GL_UNPACK_ROW_LENGTH.
- D3D11: UpdateSubresource with a box, no staging texture needed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
TextureCacheGLES passed a hardcoded 0.0f instead of key.aniso, so the
Anisotropic Filtering setting did nothing at all on the OpenGL backend, even
though GPU_USE_ANISOTROPY was advertised and D3D11/Vulkan both honor it. Looks
like it was left behind by the 2017 render manager refactor.
The queue runner now clamps to the device maximum it already queried into
maxAnisotropyLevel_ (until now unused), and only touches the parameter when the
extension is actually supported - the anisotropy branch there has been dead
since every caller passed 0.0f, so this is the first time it runs.
0.0f keeps its meaning of "don't care" for the CLUT/fragment-test/thin3d
callers; the texture cache now passes 1.0f when the setting is off, so turning
it off takes effect on already-uploaded textures instead of only new ones.
TexCache: Never use anisotropic filtering for CLUT8-indexed textures
What gets sampled for those is palette indices, depalettized by the shader
afterwards - averaging indices across an anisotropic footprint produces garbage
colors. Affects all backends, not just the GL one that just started honoring
key.aniso.
TexCache: Clear key.aniso wherever filtering is forced to nearest
It was only cleared in the two places inside the AUTO_MAX_QUALITY branch, so the
TEX_FILTER_AUTO path (pixel-mapped textures, the ugly color test heuristic), the
FORCE_NEAREST setting and the replacement-texture override could all end up
requesting nearest filtering with anisotropy still on.
Doing it in the switch that applies forceFiltering covers every path, so it
can't drift apart again.
GLES: Only record the applied anisotropy, and log skipped draws
The queue runner updated tex->anisotropy even when it skipped the call because
the value was 0.0f ("don't care") - harmless while nothing ever set anisotropy,
but now it would make the tracked state disagree with GL, so a later request for
the value it thinks is set would be wrongly skipped.
Also log when a draw is skipped for a missing vertex shader. The failure is
cached per shader ID, so without it geometry silently disappears for the rest of
the session after the one-shot OSD message.
Nothing has generated or used a geometry shader since the GS paths were removed
- GeometryShaderGenerator is gone, and ShaderWriter's BeginGSMain/EndGSMain had
no callers at all. Removes ShaderStage::Geometry and everything hanging off it:
the GS preambles and GSMain helpers in ShaderWriter, the stage mappings in all
three thin3d backends, the D3D11 geometry shader plumbing (curGS_, the pipeline
and module members, gs_4_0 compilation), CreateGeometryShaderD3D11, the unused
PipelineFlags::USES_GEOMETRY_SHADER and PipelineManagerVulkan's
UsesGeometryShader().
Also stop enabling the Vulkan geometryShader device feature, since we no longer
have any use for it.
Kept on purpose: the device feature is still listed in the feature dumps (like
other capabilities we don't use), and the Vulkan shader cache header keeps its
now-always-zero geometry shader count so the on-disk format stays compatible.
VulkanGraphicsContext::InitSurface() threw away VulkanContext::InitSurface()'s
VkResult and carried on, so a failed surface init surfaced as
_dbg_assert_(GetAvailablePresentModes().size() > 0) in the VKContext
constructor rather than as a graphics error with the usual backend fallback.
The vkCreate*SurfaceKHR failure path in ReinitSurface() didn't log anything
either, so the assert was the only trace of it.
Now ReinitSurface() logs and sets init_error_ for all three ways it can bail
(surface creation, ChooseQueue, present mode enumeration), InitSurface()
checks the result, and MainThreadFunc() passes the message back out instead of
writing it to a local it then drops - Windows/main.cpp was reporting
"Failed to initialize main thread function." to the user.
Also deletes the Application on that failure path, which was leaked.
GLRenderManager is documented as "emu thread records, render thread executes",
but GL has to record device object creation as init steps rather than just doing
it, and InitGPU() runs on the ExecLoader thread - GPU_GLES's constructor builds
DrawEngineGLES, whose InitDeviceObjects() reaches initSteps_ through
CreatePushBuffer and CreateInputLayout. The emu thread is still drawing the
loading screen into the same FastVec until the loader thread is joined, so two
concurrent push_uninitialized() can both reallocate, and one writes its step into
a freed buffer - losing a shader or buffer creation, or scribbling an owned
pointer into freed memory.
frameData_[].activePushBuffers is genuinely three-threaded too: inserted into by
whoever creates a push buffer, erased on the render thread via GLDeleter, and
walked on the render thread each frame.
A mutex each, uncontended in practice. Note this makes the existing access safe
rather than fixing the layering - Vulkan avoids the problem by creating objects
directly and deferring the rest to FinishInitOnMainThread, which GPU_GLES has
never had. Moving GL's device object creation there would be the better fix.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Vd8ntC2brCUtCrDJMqLbs8
The loop queue-deleted the VkPipeline and nulled the slot without deleting the
Promise the array owns - DestroyVariantsInstant right below it shows the intended
ownership. That's one leaked Promise per destroyed variant per cached pipeline,
on every MSAA or resolution change.
It also wrote pipeline[] without taking mutex_, which the header documents as
protecting that array and which the render thread holds while reading and
replacing the same slots in PerformRenderPass. The two have to be fixed together:
the missing delete was the only thing keeping this a leak rather than a
use-after-free.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Vd8ntC2brCUtCrDJMqLbs8
GetRenderPass() looks up and inserts into renderPasses_ from the main thread
(EndCurRenderStep, CreateGraphicsPipeline) and from the render thread
(PerformBindFramebufferAsRenderTarget), unsynchronized. The render thread really
does insert rather than only hit: PreprocessSteps rewrites the load actions to
CLEAR when it merges a clear-only pass into a later one, after the main thread
already looked up the pre-merge key. DenseHashMap::Insert can Grow(), which
reallocates the buckets out from under a concurrent Get().
VKRRenderPass::Get() has the same problem one level down - it creates the passes
lazily and is called from both threads on the same object, so two threads hitting
an empty slot each create a pass and one gets overwritten and leaked, while the
sample-count branch can queue a pass for deletion that the other thread is about
to hand to vkCreateGraphicsPipelines.
A mutex each. Handing the VKRRenderPass pointer out from under the map lock is
fine, entries are only ever erased all at once in DestroyDeviceObjects.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Vd8ntC2brCUtCrDJMqLbs8
This is a leftover from the old "native" library. Its only users are the Win32 GE
debugger's preview windows, which call glsl_create_source/destroy/bind/unbind and
read four locations off the struct.
Everything else was dead: glsl_create was declared but never defined anywhere,
which made the entire file-loading and auto-reload half of glsl_recompile
unreachable (glsl_create_source always passes empty filenames), along with the
mtime fields, AutoCharArrayBuf and the VFS/stat includes. glsl_attrib_loc,
glsl_uniform_loc and glsl_get_program had no callers, and the active_programs set
was written and never read. The unused convenience locations cost a
glGetUniformLocation round trip each at link time.
The bug: the vertex shader was leaked when its own compile failed - the fragment
path right below it already deleted it correctly. Failed links leaked the program
object too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Vd8ntC2brCUtCrDJMqLbs8
The Intel workaround sscanf'd "Build %d.%d.%d.%d" against glGetString(GL_VERSION),
which reads like "4.5.0 - Build 26.20.100.7870" - sscanf literals have to match
from the start, so it never returned 4 and HasIntelDualSrcBug was never consulted.
It's been inert since it was written, and the drivers it targeted are long gone.
Removing it orphaned the two helpers, so those go too.
Separately, when gl3stubInit() fails we left ver[0] at 3 while clearing GLES3.
Extension enumeration keys off the version, not the flag, so it went on to call
glGetStringi - one of the very entry points whose absence makes gl3stubInit()
fail. Drop back to 2.0 on that path, like the branch above it already does, and
null-check what glGetStringi hands back.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Vd8ntC2brCUtCrDJMqLbs8
* TransitionDepthStencilImageAuto set dstAccessMask to TRANSFER_READ_BIT for
TRANSFER_DST_OPTIMAL. The color path and this function's own source-side switch
both use TRANSFER_WRITE_BIT - it's a copy-paste from the TRANSFER_SRC case two
lines up. Every depth copy and blit went through it.
* VulkanMayBeAvailable's per-device loop did anyGood = !blacklisted, overwriting
the verdict from earlier devices, so a blacklisted GPU enumerated after a good
one hid the Vulkan backend entirely. Hybrid-GPU machines are exactly what the
blacklist targets.
* The instance extension scan stopped as soon as it found the platform surface
extension, so a driver reporting that before VK_KHR_surface made us give up
with "Platform surface extension not found". Enumeration order isn't specified.
* CreateDevice only logged when vkCreateDevice failed, then carried on to report
success, call VulkanSetAvailable(true) and build a VMA allocator on a null
device behind an assert that's live in release builds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Vd8ntC2brCUtCrDJMqLbs8
