VR_DestroyRenderer() freed projections without nulling it, and
VR_GetView() indexed it with no initialized check - a latent
use-after-free if VR_GetView were ever called between a destroy and
the next VR_InitRenderer. Not currently reachable (VR_DestroyRenderer
is only called from inside VR_InitRenderer, synchronously followed by
reallocation), but cheap to close off.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
INVR_Vibrate()'s channel selection was `i & chan` (bitwise AND) inside
a loop over i in [0,2), instead of just using chan directly as the
index. For chan=0 (left controller, per the only call site iterating
j in [0,2)), i & 0 is always 0, so the "if (channel)" check was never
true and vibration_channel_duration/intensity were never set - the
left controller silently never vibrated. chan=1 (right) happened to
work by coincidence (i=1 gives 1 & 1 == 1). chan is now used directly
as the array index, with no loop needed.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
FromConfigString() indexed parts[0]/parts[1] from SplitString() with
no check that at least 2 parts were produced - a malformed/truncated
line in a hand-edited controls.ini (no '-') was an OOB vector access.
Separately, DEVICE_ID_ANY (-1) didn't round-trip correctly:
ToConfigString() formats it as e.g. "-1-5", but splitting that on '-'
produces "", "1", "5" instead of "-1", "5" - deviceId decoded to 0 and
keyCode to 1 instead of 5. Rather than special-casing the negative
sign to make it round-trip, just reject DEVICE_ID_ANY mappings
outright - it's not something we want to support, and the whole ANY
concept is likely going away. Preserves the existing (tested) behavior
of tolerating a MultiInputMapping string and parsing just its first
mapping, via atoi()'s stop-at-first-non-digit behavior.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
The memmove length was computed from size_ after ExtendByOne() had
already bumped it, so it moved (oldSize - pos + 1) elements instead of
(oldSize - pos) - reading one uninitialized element past the old data
and writing one element past the new logical size. Currently masked
by ExtendByOne()'s growth policy always leaving capacity slack, but
a real overflow waiting for that assumption to not hold. Now captures
the old size before extending.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
next_crlf_offset() called peek() one byte past the currently buffered
data whenever a '\r' was the very last byte received (a normal TCP
fragmentation boundary) - peek() has no way to signal "not enough
data yet" and just asserts. Now checks there's actually a next byte
before peeking.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
next() would read a truncated lead byte's "second byte" unconditionally,
even when that byte was actually the string's null terminator - leaving
index_ one past the terminator, so a subsequent end()/next() call read
one byte out of bounds. Now checks for the terminator before consuming
it, returning INVALID without advancing past it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
RIFFReader::ReadData() trusted its count argument completely and
memcpy'd straight from the internal buffer with no bounds check.
Hardened it to clamp against the buffer and zero-fill any shortfall,
as defense in depth.
The actual reachable bug was in BackgroundAudio.cpp: it read a WAV
'smpl' chunk into a vector sized by GetCurrentChunkSize(), then
unconditionally indexed smplData[28] (and, for the loop array,
smplData[36]) with no check that the chunk was actually that large -
a short/corrupt chunk in a game's background-music WAV caused a heap
OOB read. Also fixes &smplData[0] being UB when the chunk is empty.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
LoadZIMPtr() writes width[]/height[]/image[] as arrays (one entry per
mip level, up to ZIM_MAX_MIP_LEVELS) whenever the file has
ZIM_HAS_MIPS set, per its documented contract - but this caller passed
plain scalar locals. A texture-replacement .zim file with that flag
set caused multiple out-of-bounds stack writes. Now passes properly
sized arrays and only uses level 0, matching the existing "we don't
support ZIM mips yet" behavior. Also fixes a pre-existing leak of
image[0] on the "changed since header read" error path.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
These dereferenced get()'s result unconditionally, unlike the
two/three-arg "OrDefault" overloads which check. Hit on externally
sourced JSON: UI/Store.cpp reads the remote homebrew-store listing,
UI/DriverManagerScreen.cpp reads user-supplied GPU driver package
metadata - a field simply missing from either crashed the app instead
of failing gracefully.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
hTriggerEvent/criticalSection/logPending_ were only initialized when
useThread_ was true, but Log() falls back to SendToThread() (which
uses all three) whenever the console isn't open yet, regardless of
useThread_. With useThread_ false, that meant an uninitialized
CRITICAL_SECTION and a null logPending_ write. Dead path today (only
reachable via a commented-out line), but now initializes unconditionally.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
SetFileLogPath() and Shutdown() closed/reassigned fp_ without holding
logFileLock_, while LogLine() only locked around the actual fprintf,
after already reading fp_ unlocked. A concurrent SetFileLogPath() or
Shutdown() could close the FILE* mid-write from another thread. Now
all three paths hold logFileLock_ across the check-and-use of fp_.
Also fixes fp_ being left dangling (non-null but closed) if
SetFileLogPath() runs while File output is disabled.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
The notify_one chain (each waiter wakes exactly one more) was correct
but fragile and non-obvious. notify_all is simpler and just as cheap
here since Arrive() is not a hot path.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
SimpleParallelTask/LoopRangeTask never overrode Cancellable(), so a
ThreadManager::Teardown() racing with an in-flight parallel loop would
drop them without ever calling counter_->Count(), leaving anyone
blocked in WaitableCounter::Wait() stuck forever. Cancel() now counts
down the same as a normal completion.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
AndroidHwScale defaults to 0 instead of the old device/resolution-based heuristic (which is
removed along with DefaultAndroidHwScale()).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
...
- ~ThreadManager() never stopped worker threads before freeing the
global context. If Teardown() wasn't reached before process exit
(e.g. an early return between Init() and a caller's shutdown path),
the still-running threads kept touching freed mutexes/queues/condvars,
causing intermittent crashes on exit. The destructor now tears down
if still initialized.
- Teardown() silently leaked any non-cancellable task still sitting in
a queue (global or per-thread) at shutdown time - such tasks were
never run nor released, since nothing drains those queues once the
worker threads have been marked cancelled/joined. Now every queued
task is properly cancelled-or-warned and released.
- Added an assert against a divide-by-zero in EnqueueTask's round-robin
fallback, which would trigger if Init() were ever called with zero
compute threads.
- Removed Task::id()/Kind() and ThreadManager::TryCancelTask(), which
were unused dead code (TryCancelTask was a no-op with no callers).
- Fixed a stale comment on EnqueueTaskOnThread referencing a parameter
that doesn't exist, and an auto-typed ternary that misleadingly read
like a deque array copy (it's a pointer, not a copy).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L4QAoxV2KY7ek4PcZw3WvY
Our Qt backend has long been left behind and doesn't even support Vulkan
currently. There would be a lot of work to make it viable, and I don't
think anyone is really interested.
ImGui on SDL will soon fulfill the need for a more classic user interface
with a menu bar on Linux, and on Mac we already have a native UI.
Windows/MainWindowMenu.cpp's Load/Save/Clear Symbol Map menu actions
mutated g_symbolMap directly from the WinMain thread; route them through
Core_RunOnCPUThread like the rest of the debugger. Windows/MainWindow.cpp's
WM_USER_GET_MODULE_INFO handler read it directly too; guard with
g_frameMutex. Windows/main.cpp's SortSymbols() calls turn out to already be
safe as-is - both notifications that trigger them (BOOT_DONE,
SYMBOL_MAP_UPDATED) are only ever fired from the CPU/NativeFrame thread -
so just fix the stale comment claiming reliance on the (now removed)
internal lock.
With those covered, every remaining caller is either on the CPU/NativeFrame
thread already or routes through Core_RunOnCPUThread/g_frameMutex, so
SymbolMap's internal recursive_mutex is redundant - remove it and all ~40
lock_guard call sites. Qt's mainwindow.cpp still pokes at g_symbolMap
directly and unguarded (a pre-existing issue, out of scope - Qt isn't a
maintained backend), but removing the lock doesn't change its public API,
so it still builds.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
Core_RunLoopUntil() is only reached while a game is actually loaded and
running (via EmuScreen). Anything calling Core_RunOnCPUThread() while at
the main menu with no game loaded would hang forever waiting for a queue
that was never drained. Call Core_ProcessCPUQueue() directly from
NativeFrame(), just before screenManager->render(), so it always runs;
Core_RunLoopUntil() still also drains it for the tight-spin-while-stepping
case once a game is running.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
Every caller either runs on the CPU thread already, routes mutations
through Core_RunOnCPUThread, or holds g_frameMutex for reads - audited
across WebSocket subscribers, the legacy Win32 debugger, ImDebugger, and
the JIT/interpreter backends. Also renames GetMemCheckLocked to
FindMemCheckInRange since it no longer implies a lock is held.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
Debugger windows (register list, disassembly view, memory view, breakpoint/
thread/module/stack lists, watch list) read CPU-thread-owned state directly
from the GUI thread's WM_PAINT/list-fill handlers, racing against the CPU
thread. Routing every read through Core_RunOnCPUThread would be too slow for
something invoked continuously on paint/list-refresh.
Add g_frameMutex (Core.h/Core.cpp), held by NativeFrame() only across the
span where it actually touches that state (running the CPU, processing
breakpoints, running the ImGui debugger) - not across input handling or the
present/frame-pacing waits. Debugger windows now hold the same mutex while
reading, giving synchronized reads without the round-trip cost of queuing
to the CPU thread.
CtrlRegisterList::onPaint() goes back to always reading live values (now
safe under the lock) and grays them out by color alone while the core is
running, rather than the earlier snapshot-caching approach.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
memory.read_u8/u16/u32/read/readString/write_u8/u16/u32/write/search all
validated their address/size parameters (and, for search, the rest of its
param parsing) after already queuing onto the CPU thread. None of that
depends on CPU-thread-owned state, so do it upfront instead and fail fast
without a round trip through the queue for requests we already know are
invalid.
Also, for memory.read and memory.readString, only the raw memory copy
(which needs replacements/emuhacks disabled) now happens on the CPU
thread - the base64 encoding itself happens back on the WebSocket thread
afterward, so a large read no longer blocks the CPU thread's frame pump
for the encoding work too.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
The Win32 debugger dialogs mutate CPU-thread-owned state (breakpoints,
symbol map, registers, memory, kernel threads) directly from the GUI
thread with no synchronization, same problem the WebSocket debugger had.
Route all of these through Core_RunOnCPUThread instead, following the
same pattern used there.
Also drops two forced-pause (Core_Break/Core_WaitInactive/Core_Resume)
dances in CtrlMemView::onChar and DumpMemoryWindow's dump handler, now
unnecessary since Core_RunOnCPUThread works whether the CPU is running
or already stepping.
Modal dialogs (MessageBox, InputBox_GetString, BreakpointWindow::exec,
etc.) are kept outside any queued callback so they never block the CPU
thread on user input. Pure reads/painting (disassembly formatting,
search, list reloads, onPaint) are intentionally left as-is for now.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
Same treatment as the other subscribers: thread list/wake/stop, function and
data symbol list/add/remove/rename/scan, and backtrace now route their
kernel thread, symbol map, and disassembly manager access through
Core_RunOnCPUThread() instead of touching that state directly from the
WebSocket handler thread.
Memory::IsValidRange() checks that only depend on the request's own
address/size params (not on anything CPU-thread-owned) stay outside the
queued callback and fail fast, rather than making a pointless round trip
through the CPU thread for a request already known to be invalid.
hle.func.scan carries the same unbounded-range caveat already noted for
memory.search: no cap on 'size' beyond valid memory range.
Replaced remaining `auto` locals with concrete types.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
Every memory.read*/write*/search endpoint used to call LockMemoryAndCPU(),
which - unless the CPU was already stepping - busy-waited for coreState to
settle, force-paused a running game with Core_Break(), and blocked on
Core_WaitInactive() before touching memory, just to get exclusive access
from the WebSocket handler thread. It also took MIPSComp::jitLock around
saving/restoring emuhack ops for the same reason.
Now the whole body of each handler runs inside Core_RunOnCPUThread(), so
none of that is needed for CPU-thread exclusivity: reads/writes happen
inline on the CPU thread itself, whether the game is running or stepping,
without ever pausing it. Confirmed live that memory reads/search now
complete while coreState stays CORE_RUNNING_CPU throughout - no more
stepping flicker on every debugger memory poll.
Kept Memory::MemoryInitedLock (guards against Memory::Shutdown() racing in
from a different thread, e.g. the UI thread stopping the game - unrelated
to the WebSocket-thread-vs-CPU-thread problem) and MIPSComp::jitLock around
the emuhack save/restore (guards against a UI-triggered CPU core switch,
also a different thread than the one Core_RunOnCPUThread targets).
Same caveats as previous conversions: memory.read for a very large 'size'
now base64-encodes on the CPU thread itself, and memory.search still has no
size cap - both will now block the CPU thread's own frame pump for their
duration on a large enough request. Noted inline, not fixed here.
Replaced remaining `auto` locals with concrete types.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
CPUCoreSubscriber through the CPU thread
Continues the pattern started with SteppingSubscriber: route breakpoint,
disassembly, symbol, and register access through Core_RunOnCPUThread()
instead of touching that state directly from the WebSocket handler thread.
Two intentional exceptions, matching the reasoning already used for
cpu.stepInto's "not currently stepping" branch:
- cpu.stepping's Core_Break() call stays unqueued - it's what makes the CPU
thread start reaching the queue drain point in the first place.
- cpu.status stays unqueued - it's meant to be a cheap, frequently-pollable
status check, and its "pc" field is already documented as inaccurate unless
stepping. Matches how SteppingBroadcaster already reads the same state
directly from the WebSocket thread.
Where a handler's response doesn't depend on anything the queued lambda
computed (plain add/remove endpoints), moved req.Respond() back out after
the Core_RunOnCPUThread() call for readability - the JSON building and
socket write happen later in Finish() regardless of where Respond() is
called, so there's no thread-safety difference either way, just clarity
about what actually needs to run on the CPU thread.
memory.searchDisasm carries the same caveat flagged for memory.search: its
scan range has no size cap, so if the CPU is stepping, a very large range
will now block the CPU thread's own frame pump for the scan's duration
rather than running unqueued on the WebSocket thread as before. Not fixed
here - noted in a comment at the call site.
Replaced remaining `auto` locals in these three files with concrete types.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
Extends the cpu.stepInto treatment to cpu.stepOver, cpu.stepOut, cpu.runUntil,
and cpu.nextHLE: each now routes its breakpoint/stepping manipulation through
Core_RunOnCPUThread() instead of touching it directly from the WebSocket
handler thread. cpu.runUntil didn't have an explicit "must be stepping"
guard to begin with; since the CPU-thread queue is now drained unconditionally
at the top of every Core_RunLoopUntil() iteration (not just while stepping),
queuing from it is safe regardless of current core state.
Also corrects a stale comment on Core_RunOnCPUThread() left over from before
the drain point moved from Core_ProcessStepping() to the top of
Core_RunLoopUntil() - it's not limited to the stepping/paused case.
Replaced remaining `auto` locals in this file with concrete types.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
The WebSocket debugger's cpu.stepInto handler ran entirely on the WebSocket
handler thread, directly manipulating breakpoints and stepping state (via
Core_RequestCPUStep, g_breakpoints.SetSkipFirst, etc.) that's otherwise only
ever touched from the CPU thread (the one that calls Core_RunLoopUntil, and
thus indirectly NativeFrame).
Adds Core_RunOnCPUThread() - queues a function to run on the CPU thread and
blocks the caller until it's done. The queue is drained at the top of
Core_RunLoopUntil()'s loop, so it's reached continuously (in a tight spin)
while the CPU is stepping/paused, and at least once per call even while fully
running.
cpu.stepInto is the first consumer: once the CPU is already stepping, the
breakpoint/stepping manipulation is now routed through Core_RunOnCPUThread
instead of happening directly on the WebSocket thread. The "not currently
stepping" path still calls Core_Break() directly from the WebSocket thread,
since it's already documented free-threaded and is what makes the CPU thread
start reaching the queue-drain point in the first place.
More WebSocket debugger commands can be converted the same way going forward.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH
DisassemblyManager used to fuse lui+addiu/load/store into single pseudo-
instructions ("li", fused loads/stores) for display. This only applied to a
handful of opcodes, complicated DisassemblyManager, and was the root cause of
a stepping bug: Core_PerformCPUStep's Into/Over cases treated stepSize as a
byte count, while the WebSocket cpu.stepInto handler computed it as an
instruction count (needed to step over a whole fused macro in one go) - so a
plain, non-fused stepInto silently executed zero instructions.
Removed the fusion logic entirely (DisassemblyMacro, DISTYPE_MACRO) - every
disassembly line is now exactly one 4-byte instruction. With that,
"how many instructions does this line span" is always 1, so the
getInstructionSizeAt() byte-size queries in the legacy Windows and ImGui
debuggers are gone too; step requests just pass 1. Core_RequestCPUStep's
stepSize is now consistently in instructions everywhere.
Also fixes the PPSSPPHeadless build, broken since 0ed1f3e added
OpenWebDebugger() (which calls System_LaunchUrl) without a headless stub.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Hqm11k99viLfbJm2MkH4BH