46e1fbb788
Initial texture work. Bugfix indexed drawing
2018-01-27 15:10:17 +01:00
bd6818198a
More GLRenderManager
2018-01-27 15:10:17 +01:00
267b9a6598
Profiler: Separately track texture hashing.
...
Since it's slow and was lumped into updatestate.
2017-12-30 10:14:35 -08:00
025a806ab4
GPU: Remove FBO auto-download hack.
...
See #6261 . This should be replaced now with block transfer detection,
which is faster and doesn't cause crashes.
Games that previously required this setting should use block transfer
instead. If that doesn't work, it's a bug.
2017-12-25 11:17:59 -08:00
5c1dad9909
Remove more obsolete ifdefs
2017-12-19 17:59:00 +01:00
299cb007c2
Add a comment, revert a reporting change.
2017-12-10 02:05:25 +01:00
b75c8b72c6
Fix another little inconsistency (two uniforms were merged for bad reasons)
2017-12-07 21:39:09 +01:00
9468b3d073
Add a missing break that would explain the odd AUTO mipmap test results on D3D11 and Vulkan...
2017-11-21 15:18:31 +01:00
7ab6956828
The UNKNOWN(3) mip selection mode seems to act like CONST. Keep that working.
2017-11-20 12:39:01 +01:00
971995fa3d
Move aniso to the sampler cache key.
2017-11-15 19:07:41 +01:00
909fb6b3a4
Cleanups
2017-11-15 16:31:17 +01:00
313223364c
Buildfix, update comments slightly
2017-11-15 14:21:17 +01:00
65275c29b7
Share UpdateSamplingParams between D3D11 and Vulkan. Support lod bias in Vulkan.
2017-11-15 14:21:17 +01:00
f564c59248
Mipmaps: Disable LOD bias in slope mode as that's not how it works.
...
Works around #9772
2017-11-15 14:21:17 +01:00
2c27b3b56b
Fix texture conversion.
2017-11-14 02:35:14 +01:00
9fbcc01afa
TexCache: Remove simple 0/1 alpha check.
...
No practical optimizations have come of this, so it's a waste of time.
Slows down Vulkan too.
2017-11-12 16:17:46 -08:00
1f33907f20
TexCache: Warning fix.
2017-11-05 17:59:34 -08:00
79208f105c
Merge pull request #10055 from unknownbrackets/vulkan-minor
...
Vulkan: Correct logicop dirtying
2017-11-05 22:41:11 +01:00
7ae451db1f
TexCache: Detect textures in FBO gutters.
...
If it's not even within the framebuffer's bufferWidth, we can just go to
the RAM as normal and skip the FBO.
Fixes #10045 .
2017-11-05 13:03:09 -08:00
78b5565035
GPU: Properly Release() FBOs.
...
In case we end up wanting to use those reference counts, let's use the
right API.
2017-11-05 12:45:02 -08:00
d19d8a8bb8
NEON-optimize CLUT loads
2017-08-15 16:02:31 +02:00
96ed8564ab
Add some missing fragment shader state changes.
2017-08-14 11:36:07 +02:00
f66ffb9ffe
GPU: Fix negative mip levels with const workaround.
...
Might've crashed if it hit a negative level before.
2017-05-31 21:42:07 -07:00
34fe95192f
GPU: Cleanup some gstate accesses.
2017-05-26 19:03:04 -07:00
1b05a54800
Remove the Mipmap setting. One step forward for #8171
2017-05-26 10:21:20 +02:00
c4d1863ded
GPU: Consistently bias const mip levels.
...
Since SLOPE is just a more complicated CONST, we can treat them the same.
2017-05-12 20:30:47 -07:00
6aad8ff2a2
GPU: Correct const mip 0 detection.
...
The other clause was mip 1.
2017-04-22 18:19:43 -07:00
6b9b26f521
Forgot to fix this accessor too
2017-04-03 18:06:49 +02:00
5a8e9c4f71
Port some accessors over from #9255 to be able to catch these changes and dirty state later.
2017-04-03 17:04:58 +02:00
32a07b9aa9
Texcache: Sprinkle comments on the secondary cache.
2017-03-26 10:18:43 -07:00
c8187dd35c
If an entry already exists in the secondary texture cache, delete it properly. Fixes #9503
2017-03-26 18:33:11 +02:00
bc31415bfc
Texcache: Fix "reuse changed textures".
...
Broken by 9876365
2017-03-25 15:30:58 -07:00
bb39c2e458
Texcache: Rehash textures after mem invalidation.
...
Before, we were doing this when we enqueued. We need to at least do this
when an invalidation is triggered.
2017-03-25 11:49:15 -07:00
7fb7a4877d
Texcache: Cleanup last bound tex invalidation.
...
When we're deleting, we're always about to bind a new tex.
2017-03-25 11:42:24 -07:00
18484bed3d
D3D11: Correct non-palette 16 bit textures on Win7.
...
These weren't being expanded.
2017-03-18 20:10:21 -07:00
41dacb792c
Texcache: Reduce duplicated expand32 code.
2017-03-18 20:09:38 -07:00
404c61d77d
Minor typo fixes.
2017-03-18 11:51:05 -07:00
d0ea5ed72b
Texcache: Always mark videos as freq changing.
...
This prevents scaling of the first frame in some cases, when later frames
would also not be scaled. Improves performance and reduces frame
mismatch.
2017-03-18 11:49:30 -07:00
30ff5d6cdb
Texcache: Apply freq change flag to minihash fail.
...
Previously, by mistake, only full hash fails could flag a frequently
changing texture - minihash checks skipped this, causing scaling
performance issues.
Fixes #9125 .
2017-03-18 11:44:06 -07:00
bea6d787c0
Texcache: Cleanup some code formatting.
...
Makes it more readable. No functional impact.
2017-03-18 11:43:26 -07:00
98763655e7
Plug a memory leak in the GLES texture cache. Fixes #9089
2017-02-23 22:41:13 +01:00
8eb668ea59
D3D11: Enable pixel depth rounding. GL: Fix a crash bug
2017-02-23 20:40:53 +01:00
0954ecf28c
D3D11: Expand 16-bit texture formats to 32-bit if they are not supported, like on Windows 7. Part of issue #9317
2017-02-22 17:31:01 +01:00
f24b1495ba
Assorted texture format cleanup, prep for supporting D3D11 on Win7
2017-02-22 16:23:04 +01:00
f772066c54
Remove some unnecessary error handling paths
2017-02-21 11:29:51 +01:00
78abf7453c
Add some comments and a sanity check, fix a minor leak
2017-02-21 10:58:21 +01:00
195eb94c8e
Texcache: Keep pointers to entries instead of full entries in the map.
2017-02-20 00:45:07 +01:00
4652c6af28
Some member variable renaming to match the convention
2017-02-20 00:19:58 +01:00
f753573332
Unify HandleTextureChange
2017-02-20 00:13:21 +01:00
f15e25c4b5
Centralize SetTexture
2017-02-20 00:05:23 +01:00
Henrik Rydgård