Make ich9_lpc_update_pic take care only of GSIs 0-15, and
ich9_lpc_update_apic take care only of GSIs 16-23. Assert
that they are called with the correct GSI indices.
Reviewed-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An asserted pirq can be disabled and the corresponding GSIs
should then go down to 0. However, because of the conditional in
ich9_lpc_update_by_pirq, the legacy 8259 pin could remain stuck to 1.
Reviewed-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ICH9 SMB bridge can be created using qdev API despite existence of helper
function. The type name is needed for such creation. Using a preprocessor
alias instead the string type name itself is preferable.
The patch makes the alias accessible through the header.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The port92 device has outgouing IRQ line A20. Currently the IRQ is referenced
by a pointer which normally is set during machine initialization. The
pointer is never changed at runtime. Hence, common GPIO model can be applied
to A20 IRQ line. Note that checking for IRQ to be connected as in
previous version of code is not required qemu_set_irq will do it.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i8042 device has outgouing IRQ line A20. Currently the IRQ is referenced
by a pointer which normally is set during machine initialization. The pointer
is never changed at runtime. So common GPIO model can be applied to A20 IRQ
line. Note that checking for IRQ to be connected as in previous version
of code is not required because qemu_set_irq will do it.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, Q35 instance is configured using direct access to structure fields.
The patch uses property interface to set the fields.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During creation of Q35 instance several parameters are set using direct access.
It violates Qemu device model. Correctly, the parameters should be handled as
object properties.
The patch adds four link type properties for fields:
mch.ram_memory
mch.pci_address_space
mch.system_memory
mch.address_space_io
And, it adds two size type properties for fields:
mch.below_4g_mem_size
mch.above_4g_mem_size
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev API can be used to create CFI pflash devices despite existance of helper
functions. The type name is needed in course of such creation. Using the
preprocessor alias instead of the string literal itself is preferable.
The patch makes the aliases accessible through the header.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vmport device is identified by the string literal. Using a
preprocessor alias instead is preferable.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The speaker device needs pointer to ISA PIT device to operate. But according to
qdev-properties.h, properties of pointer type should be avoided. It seems a
link type property is a good substitution.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop building linux-user targets on HPPA or m68k host systems
and add safe_syscall support for i386, aarch64, arm, ppc64 and
s390x.
# gpg: Signature made Tue 28 Jun 2016 19:31:16 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0
* remotes/riku/tags/pull-linux-user-20160628: (24 commits)
linux-user: Provide safe_syscall for ppc64
linux-user: Provide safe_syscall for s390x
linux-user: Provide safe_syscall for aarch64
linux-user: Provide safe_syscall for arm
linux-user: Provide safe_syscall for i386
linux-user: fix x86_64 safe_syscall
linux-user: don't swap NLMSG_DATA() fields
linux-user: fd_trans_host_to_target_data() must process only received data
linux-user: add missing return in netlink switch statement
linux-user: update get_thread_area/set_thread_area strace
linux-user: fix clone() strace
linux-user: add socket() strace
linux-user: add socketcall() strace
linux-user: Support F_GETPIPE_SZ and F_SETPIPE_SZ fcntls
linux-user: Fix wrong type used for argument to rt_sigqueueinfo
linux-user: Create a hostdep.h for each host architecture
user-exec: Remove unused code for OSX hosts
user-exec: Delete now-unused hppa and m68k cpu_signal_handler() code
configure: Don't allow user-only targets for unknown CPU architectures
configure: Don't override ARCH=unknown if enabling TCI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
mirror_do_read intends to return the number of sectors processed after
the starting sector, without regard to how many sectors were processed
before the starting sector due to alignment.
Clean up the comments and code to hopefully illustrate this more clearly.
This also fixes an issue in initialization where if the mirror buffer size
is initialized to smaller than the number of sectors being requested for
transfer, we report back an incorrectly large number to the caller.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466625064-11280-2-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This adds commandline support for the logging level of the
gluster protocol driver, output to stdout. The option is 'debug',
e.g.:
-drive filename=gluster://192.168.15.180/gv2/test.qcow2,debug=9
Debug levels are 0-9, with 9 being the most verbose, and 0 representing
no debugging output. The default is the same as it was before, which
is a level of 4. The current logging levels defined in the gluster
source are:
0 - None
1 - Emergency
2 - Alert
3 - Critical
4 - Error
5 - Warning
6 - Notice
7 - Info
8 - Debug
9 - Trace
(From: glusterfs/logging.h)
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
upcoming libnfs will have support for a read cache that can
significantly help to speed up requests since libnfs by design
circumvents the kernel cache.
Example:
qemu -cdrom nfs://127.0.0.1/iso/my.iso?pagecache=1024
The pagecache parameters takes the maximum amount of pages to
cache. A page in libnfs is always the NFS_BLKSIZE which is
4KB.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1463662083-20814-3-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
if we open a NFS export with disabled cache we should refuse
the readahead feature as it will cache data inside libnfs.
If a export was opened with readahead enabled it should
futher not be allowed to disable the cache while running.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1463662083-20814-2-git-send-email-pl@kamp.de
Signed-off-by: Jeff Cody <jcody@redhat.com>
GlusterFS 3.8 contains support for SEEK_DATA and SEEK_HOLE. This makes
it possible to detect sparse areas in files.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Adds two events to trace syscalls in syscall emulation mode (*-user):
* guest_user_syscall: Emitted before the syscall is emulated; contains
the syscall number and arguments.
* guest_user_syscall_ret: Emitted after the syscall is emulated;
contains the syscall number and return value.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 146651712411.12388.10024905980452504938.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In get_page_addr_code(), if the guest program counter turns out not to
be in ROM or RAM, we can't handle executing from it, and we call
cpu_abort(). This results in the message
qemu: fatal: Trying to execute code outside RAM or ROM at 0x08000000
followed by a guest register dump, and then QEMU dumps core.
This situation happens in one of two cases:
(1) a guest kernel bug, where it jumped off into nowhere
(2) a user command line mistake, where they tried to run an image for
board A on a QEMU model of board B, or where they didn't provide
an image at all, and QEMU executed through a ROM or RAM full of
NOP instructions and then fell off the end
In either case, a core dump of QEMU itself is entirely useless, and
only confuses users into thinking that this is a bug in QEMU rather
than a bug in the guest or a problem with their command line. (This
is a variation on the general idea that we shouldn't assert() on
something the user can accidentally provoke.)
Replace the cpu_abort() with something that explains the situation
a bit better and exits QEMU without dumping core.
(See LP:1062220 for several examples of confused users.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1466442425-11885-1-git-send-email-peter.maydell@linaro.org
The AVX2 optimization test assumes that the object format
is ELF and the system has the readelf utility. If this isn't
true then configure might fail or emit a warning (since in
a pipe "foo | bar >/dev/null 2>&1" does not redirect the
stderr of foo, only of bar). Adjust the check so that if
we don't have readelf or don't have an ELF object then we
just don't enable the AVX2 optimization.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1466287502-18730-3-git-send-email-pmaydell@chiark.greenend.org.uk
The probe we do to determine what flags to use to make the usermode
executables use a non-default text address has some flaws:
* we run it even if we're not building the user binaries
* we don't expect "ld --verbose" to fail
The combination of these two results in a harmless but
ugly "ld: unknown option: --verbose" message when running
configure on OSX.
Improve the probe to only run when we need it and to fail
nicely when even the backstop 'ld --verbose' approach fails.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1466287502-18730-2-git-send-email-pmaydell@chiark.greenend.org.uk
Monitor ioeventfds for all virtqueues in the device's AioContext. This
is not true multiqueue because requests from all virtqueues are
processed in a single IOThread. In the future it will be possible to
use multiple IOThreads when the QEMU block layer supports multiqueue.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466511196-12612-7-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The batch notification BH needs to know which virtqueues to notify when
multiqueue is enabled. Use a bitmap to track the virtqueues with
pending notifications.
At this point there is only one virtqueue so hard-code virtqueue index
0. A later patch will switch to real virtqueue indices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466511196-12612-3-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Attempting to cancel a dma_blk_io() request causes an abort(3):
void bdrv_aio_cancel(BlockAIOCB *acb)
{
...
while (acb->refcnt > 1) {
if (acb->aiocb_info->get_aio_context) {
aio_poll(acb->aiocb_info->get_aio_context(acb), true);
} else if (acb->bs) {
aio_poll(bdrv_get_aio_context(acb->bs), true);
} else {
abort();
}
}
...
}
This happens because DMAAIOCB->bs is NULL and
dma_aiocb_info.get_aio_context() is also NULL.
This patch trivially implements dma_aiocb_info.get_aio_context() by
fetching the DMAAIOCB->ctx field.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466451417-27988-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# gpg: Signature made Tue 28 Jun 2016 04:29:53 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
vmxnet3: Fix reading/writing guest memory specially when behind an IOMMU
rtl8139: save/load RxMulOk counter (again)
Change net/socket.c to use socket_*() functions
net: mipsnet: check transmit buffer size before sending
net: fix qemu_announce_self not emitting packets
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tracing configurations error out currently as follows:
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c: In function ‘aspeed_scu_read’:
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:9: error: implicit declaration of function ‘qemu_log_mask’ [-Werror=implicit-function-declaration]
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:9: error: nested extern declaration of ‘qemu_log_mask’ [-Werror=nested-externs]
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:23: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:130:23: note: each undeclared identifier is reported only once for each function it appears in
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c: In function ‘aspeed_scu_write’:
/home/travis/build/pranith/qemu/hw/misc/aspeed_scu.c:154:23: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
This is caused by a missing header file. Fix it.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20160627215304.821-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a PCI device lives behind an IOMMU, it should use 'pci_dma_*' family of
functions when any transfer from/to guest memory is required while
'cpu_physical_memory_*' family of functions completely bypass any MMU/IOMMU in
the system.
vmxnet3 in some places was using 'cpu_physical_memory_*' family of functions
which works fine with the default QEMU setup where IOMMU is not enabled but
fails miserably when IOMMU is enabled. This commit converts all such instances
in favor of 'pci_dma_*'
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit 9d29cdeaac (rtl8139: port
TallyCounters to vmstate) introduced in incompatibility in the v4
format as it omitted the RxOkMul counter.
There are presumably no users that were impacted by the v4 to v4'
breakage, so increase the save version to 5 and re-add the field,
keeping backward compatibility with v4'.
We can't have a field conditional on the section version in
vmstate_tally_counters since this version checked would not be the
section version (but the version defined in this structure). So, move
all the fields into the main state structure.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. Thetask was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Paolo Bonzini