The commentary talks about "in concert with the addresses
assigned in the relevant linker script", except there is no
linker script for softmmu, nor has there been for some time.
(Do not confuse the user-only linker script editing that was
removed in the previous patch, because user-only does not
use this code_gen_buffer allocation method.)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adjustment was random and unnecessary. The user mode
startup code in probe_guest_base() will choose a value for
guest_base that allows the host qemu binary to not conflict
with the guest binary.
With modern distributions, this isn't even used, as the default
is PIE, which does the same job in a more portable way.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Remove mention of config-host.ld from make distclean
Coverity points out (CID 1421984) that we are leaking the
memory returned by qemu_allocate_irqs(). We can avoid this
leak by switching to using qdev_init_gpio_in(); the base
class finalize will free the irqs that this allocates under
the hood.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20200323151715.29454-1-peter.maydell@linaro.org
[Maintainer edit: replace `DEVICE(dev)` by `ds` --js]
Signed-off-by: John Snow <jsnow@redhat.com>
While working on the Tulip driver i tried to write some Teledisk images to
a floppy image which didn't work. Turned out that Teledisk checks the written
data by issuing a READ command to the FDC but running the DMA controller
in VERIFY mode. As we ignored the DMA request in that case, the DMA transfer
never finished, and Teledisk reported an error.
The i8257 spec says about verify transfers:
3) DMA verify, which does not actually involve the transfer of data. When an
8257 channel is in the DMA verify mode, it will respond the same as described
for transfer operations, except that no memory or I/O read/write control signals
will be generated.
Hervé proposed to remove all the dma_mode_ok stuff from fdc to have a more
clear boundary between DMA and FDC, so this patch also does that.
Suggested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Block layer patches:
- Fix another case of mirror block job deadlocks
- Minor fixes
# gpg: Signature made Fri 27 Mar 2020 15:18:37 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Remove unused fields from BDRVQcow2State
mirror: Wait only for in-flight operations
Revert "mirror: Don't let an operation wait for itself"
nvme: Print 'cqid' for nvme_del_cq
block: fix bdrv_root_attach_child forget to unref child_bs
block/iscsi:use the flags in iscsi_open() prevent Clang warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
mirror_wait_for_free_in_flight_slot() just picks a random operation to
wait for. However, a MirrorOp is already in s->ops_in_flight when
mirror_co_read() waits for free slots, so if not enough slots are
immediately available, an operation can end up waiting for itself, or
two or more operations can wait for each other to complete, which
results in a hang.
Fix this by adding a flag to MirrorOp that tells us if the request is
already in flight (and therefore occupies slots that it will later
free), and picking only such operations for waiting.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1794692
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326153628.4869-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clang static code analyzer show warning:
block/iscsi.c:1920:9: warning: Value stored to 'flags' is never read
flags &= ~BDRV_O_RDWR;
^ ~~~~~~~~~~~~
In iscsi_allocmap_init() only checks BDRV_O_NOCACHE, which
is the same in both of flags and bs->open_flags.
We can use the flags instead bs->open_flags to prevent Clang warning.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200311032927.35092-1-kuhn.chenqun@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit 6f8bbb374b we enabled building with the gcrypt library
on the the Debian 'x86 host', which was based on Debian Stretch.
Later in commit 698a71edbe we upgraded the Debian base image to
Buster.
Apparently Debian Stretch was listing gcrypt as a QEMU dependency,
but this is not the case anymore in Buster, so we need to install
it manually (it it not listed by 'apt-get -s build-dep qemu' in
the common debian10.docker anymore). This fixes:
$ ../configure $QEMU_CONFIGURE_OPTS
ERROR: User requested feature gcrypt
configure was not able to find it.
Install gcrypt devel >= 1.5.0
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-3-philmd@redhat.com>
Message-Id: <20200323161514.23952-9-alex.bennee@linaro.org>
While debugging check-acceptance failures I found an instability in
the mips64el test case. Briefly the test case:
retry.py -n 100 -c -- ./mips64el-softmmu/qemu-system-mips64el \
-display none -vga none -serial mon:stdio \
-machine malta -kernel ./vmlinux-4.7.0-rc1.I6400 \
-cpu I6400 -smp 8 -vga std \
-append "printk.time=0 clocksource=GIC console=tty0 console=ttyS0 panic=-1" \
--no-reboot
Reports about a 9% failure rate:
Results summary:
0: 91 times (91.00%), avg time 5.547 (0.45 varience/0.67 deviation)
-6: 9 times (9.00%), avg time 3.394 (0.02 varience/0.13 deviation)
Ran command 100 times, 91 passes
When re-run with "--accel tcg,thread=single" the instability goes
away.
Results summary:
0: 100 times (100.00%), avg time 17.318 (249.76 varience/15.80 deviation)
Ran command 100 times, 100 passes
Which seems to indicate there is some aspect of the MIPS MTTCG fixes
that has been missed. Ideally we would fix that but I'm afraid I don't
have time to investigate and am not super familiar with the
architecture anyway. In lieu of someone tracking down the failure lets
disable it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <20200323161514.23952-7-alex.bennee@linaro.org>
Deep inside the FreeBSD netmap headers we end up including stdatomic.h
which clashes with qemu's atomic functions which are modelled along
the C11 standard. To avoid a massive rename lets just ifdef around the
problem.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200326170121.13045-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Block patches for 5.0-rc1:
- Fix qemu-img convert with a host device or iscsi target
- Use-after-free fix in mirror
- Some minor qcow2 fixes
- Minor sheepdog fix
- Minor qemu-img check report fix
# gpg: Signature made Thu 26 Mar 2020 14:28:26 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-03-26:
iotests/138: Test leaks/corruptions fixed report
iotests: Add poke_file_[bl]e functions
qemu-img: Fix check's leak/corruption fix report
sheepdog: Consistently set bdrv_has_zero_init_truncate
qcow2: Avoid feature name extension on small cluster size
qcow2: List autoclear bit names in header
qcow2: Comment typo fixes
block: trickle down the fallback image creation function use to the block drivers
block: pass BlockDriver reference to the .bdrv_co_create
block/mirror: fix use after free of local_err
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that qemu-img check reports the number of leaks and corruptions
fixed in its JSON report (after a successful run).
While touching the _unsupported_imgopts line, adjust the note on why
data_file does not work with this test: The current comment sounds a bit
like it is a mistake for qemu-img check not to check external data
files' refcounts. But there are no such refcounts, so it is no mistake.
Just say that qemu-img check does not do much for external data files,
and this is why this test does not work with them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200324172757.1173824-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similarly to peek_file_[bl]e, we may want to write binary integers into
a file. Currently, this often means messing around with poke_file and
raw binary strings. I hope these functions make it a bit more
comfortable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Code-suggested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324172757.1173824-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are two problems with qemu-img check's report on how many leaks
and/or corruptions have been fixed:
(1) ImageCheck.has_leaks_fixed and ImageCheck.has_corruptions_fixed are
only true when ImageCheck.leaks or ImageCheck.corruptions (respectively)
are non-zero. qcow2's check implementation will set the latter to zero
after it has fixed leaks and corruptions, though, so leaks-fixed and
corruptions-fixed are actually never reported after successful repairs.
We should always report them when they are non-zero, just like all the
other fields of ImageCheck.
(2) After something has been fixed and we run the check a second time,
leaks_fixed and corruptions_fixed are taken from the first run; but
has_leaks_fixed and has_corruptions_fixed are not. The second run
actually cannot fix anything, so with (1) fixed, has_leaks_fixed and
has_corruptions_fixed will always be false here. (With (1) unfixed,
they will at least be false on successful runs, because then the number
of leaks and corruptions found in the second run should be 0.)
We should save has_leaks_fixed and has_corruptions_fixed just like we
save leaks_fixed and corruptions_fixed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324172757.1173824-2-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
block_int.h claims that .bdrv_has_zero_init must return 0 if
.bdrv_has_zero_init_truncate does likewise; but this is violated if
only the former callback is provided if .bdrv_co_truncate also exists.
When adding the latter callback, it was mistakenly added to only one
of the three possible sheepdog instantiations.
Fixes: 1dcaf527
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324174233.1622067-5-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As the feature name table can be quite large (over 9k if all 64 bits
of all three feature fields have names; a mere 8 features leaves only
8 bytes for a backing file name in a 512-byte cluster), it is unwise
to emit this optional header in images with small cluster sizes.
Update iotest 036 to skip running on small cluster sizes; meanwhile,
note that iotest 061 never passed on alternative cluster sizes
(however, I limited this patch to tests with output affected by adding
feature names, rather than auditing for other tests that are not
robust to alternative cluster sizes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200324174233.1622067-4-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The feature table is supposed to advertise the name of all feature
bits that we support; however, we forgot to update the table for
autoclear bits. While at it, move the table to read-only memory in
code, and tweak the qcow2 spec to name the second autoclear bit.
Update iotests that are affected by the longer header length.
Fixes: 88ddffae
Fixes: 93c24936
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324174233.1622067-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of checking the .bdrv_co_create_opts to see if we need the
fallback, just implement the .bdrv_co_create_opts in the drivers that
need it.
This way we don't break various places that need to know if the
underlying protocol/format really supports image creation, and this way
we still allow some drivers to not support image creation.
Fixes: fd17146cd9
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1816007
Note that technically this driver reverts the image creation fallback
for the vxhs driver since I don't have a means to test it, and IMHO it
is better to leave it not supported as it was prior to generic image
creation patches.
Also drop iscsi_create_opts which was left accidentally.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-3-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
[mreitz: Fixed alignment, and moved bdrv_co_create_opts_simple() and
bdrv_create_opts_simple from block.h into block_int.h]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Combo Migration/HMP/virtiofs pull
Small fixes all around.
Ones that are noticeable:
a) Igor's migration compatibility fix affecting older machine types
has been seen in the wild
b) Philippe's autconverge fix should fix an intermittently
failing migration test.
c) Mao's makes a small change to the output of 'info
migrate_parameters' for tls-authz.
# gpg: Signature made Wed 25 Mar 2020 13:14:48 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200325b:
migration: use "" instead of (null) for tls-authz
migration/ram: fix use after free of local_err
migration/colo: fix use after free of local_err
vl.c: fix migration failure for 3.1 and older machine types
tools/virtiofsd/passthrough_ll: Fix double close()
hmp/vnc: Fix info vnc list leak
tests/migration: Reduce autoconverge initial bandwidth
xbzrle: update xbzrle doc
hmp-cmd: fix a missing_break warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The page isn't (necessarily) present in the host /proc/self/maps,
and even if it might be it isn't present in page_flags, and even
if it was it might not have the same set of page permissions.
The easiest thing to do, particularly when it comes to the
"[vsyscall]" note at the end of line, is to special case it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-5-richard.henderson@linaro.org>
[lv: remove trailing space]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch fixes two problems:
- it cleanups linux-user variants (for instance ppc64-linux-user
and ppc64le-linux-user)
- it removes the .o file when it removes the .d file, otherwise the .o
file is never updated
Fixes: 5f29856b85 ("linux-user, configure: improve syscall_nr.h dependencies checking")
Fixes: 4d6a835dea ("linux-user: introduce parameters to generate syscall_nr.h")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200325075757.1959961-1-laurent@vivier.eu>
run:
(qemu) info migrate_parameters
announce-initial: 50 ms
...
announce-max: 550 ms
multifd-compression: none
xbzrle-cache-size: 4194304
max-postcopy-bandwidth: 0
tls-authz: '(null)'
Migration parameter 'tls-authz' is used to provide the QOM ID
of a QAuthZ subclass instance that provides the access control
check, default is NULL. But the empty string is not a valid
object ID, so use "" instead of the default. Although it will
fail when lookup an object with ID "", it is harmless, just
consistent with tls_creds.
As a bonus, this patch also fixed the bad indentation on the
last line and removed 'has_tls_authz' redundant check in
'hmp_info_migrate_parameters'.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <119f539a9f4d198bc3bcced46b8280520d60bc51.1585100802.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Richard Henderson