The end address calculation for NA4 mode is wrong because the address
used isn't shifted.
It doesn't watch 4 bytes but a huge range because the end address
calculation is wrong.
The solution is to use the shifted address calculated for start address
variable.
Modifications are tested on Zephyr OS userspace test suite which works
for other RISC-V boards (E31 and E34 core).
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200706084550.24117-1-amergnat@baylibre.com
Message-Id: <20200706084550.24117-1-amergnat@baylibre.com>
[ Changes by AF:
- Improve the commit title and message
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
OpenSBI is the default firmware in Qemu and has various firmware loading
options. Currently, qemu loader uses fw_jump which has a compile time
pre-defined address where fdt & kernel image must reside. This puts a
constraint on image size of the Linux kernel depending on the fdt location
and available memory. However, fw_dynamic allows the loader to specify
the next stage location (i.e. Linux kernel/U-Boot) in memory and other
configurable boot options available in OpenSBI.
Add support for OpenSBI dynamic firmware loading support. This doesn't
break existing setup and fw_jump will continue to work as it is. Any
other firmware will continue to work without any issues as long as it
doesn't expect anything specific from loader in "a2" register.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20200701183949.398134-4-atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the fdt is copied to the ROM after the reset vector. The firmware
has to copy it to DRAM. Instead of this, directly copy the device tree to a
pre-computed dram address. The device tree load address should be as far as
possible from kernel and initrd images. That's why it is kept at the end of
the DRAM or 4GB whichever is lesser.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20200701183949.398134-3-atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Problem with g_get_host_name() is that on the first call it saves
the hostname into a global variable and from then on, every
subsequent call returns the saved hostname. Even if the hostname
changes. This doesn't play nicely with guest agent, because if
the hostname is acquired before the guest is set up (e.g. on the
first boot, or before DHCP) we will report old, invalid hostname.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1845127
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On one hand "guest-fsfreeze-freeze" command, "COM+ System Application service" is
stopped, on the other hand "guest-fsfreeze-thaw" stops QGA VSS Provider service from
"COM+ Application Admin Catalog".
Invoking a series of freeze and thaw commands may result in QGA failing to stop
VSS Provider service as "COM+ System Application service" is stopped, which can
cause some delay in qga response.
In this commit StopService function was changed and VSS Provider service is now
stopped using Winsvc library API.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1549425
Signed-off-by: Basil Salman <bsalman@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This command is needed to be able to boot systemd in a container.
$ sudo systemd-nspawn -D /chroot/armhf/sid/ -b
Spawning container sid on /chroot/armhf/sid.
Press ^] three times within 1s to kill container.
systemd 245.6-2 running in system mode.
Detected virtualization systemd-nspawn.
Detected architecture arm.
Welcome to Debian GNU/Linux bullseye/sid!
Set hostname to <virt-arm>.
Failed to enqueue loopback interface start request: Operation not supported
Caught <SEGV>, dumped core as pid 3.
Exiting PID 1...
Container sid failed with error code 255.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200709072332.890440-2-laurent@vivier.eu>
Only implement IFLA_PERM_ADDRESS to fix the following error:
Unknown host QEMU_IFLA type: 54
The couple of other ones, IFLA_PROP_LIST and IFLA_ALT_IFNAME, have
been introduced to be used with RTM_NEWLINKPROP, RTM_DELLINKPROP and
RTM_GETLINKPROP that are not implemented by QEMU.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200709072332.890440-1-laurent@vivier.eu>
In new functions print_ioctl() and print_syscall_ret_ioctl(), we don't
check if lock_user() returns NULL and this would cause a segfault in
thunk_print().
If lock_user() returns NULL don't call thunk_print() but prints only the
value of the (invalid) pointer.
Tested with:
# cat ioctl.c
#include <unistd.h>
#include <sys/ioctl.h>
int main(void)
{
int ret;
ret = ioctl(STDOUT_FILENO, TCGETS, 0xdeadbeef);
ret = ioctl(STDOUT_FILENO, TCSETSF, 0xdeadbeef);
return 0;
}
# QEMU_STRACE= ./ioctl
...
578 ioctl(1,TCGETS,0xdeadbeef) = -1 errno=2 (Bad address)
578 ioctl(1,TCSETSF,0xdeadbeef) = -1 errno=2 (Bad address)
...
# QEMU_STRACE= passwd
...
623 ioctl(0,TCGETS,0x3fffed04) = 0 ({})
623 ioctl(0,TCSETSF,{}) = 0
...
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 79482e5987 ("linux-user: Add strace support for printing arguments of ioctl()")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
"tmp.tls_hostname" and "tmp.tls_creds" allocated by migrate_params_test_apply()
is forgot to free at the end of qmp_migrate_set_parameters(). Fix that.
The leak stack:
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac52447fb in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1377)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c:165)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef(/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Direct leak of 2 byte(s) in 2 object(s) allocated from:
#0 0xffffb597c20b in __interceptor_malloc (/usr/lib64/libasan.so.4+0xd320b)
#1 0xffffb52dcb1b in g_malloc (/usr/lib64/libglib-2.0.so.0+0x58b1b)
#2 0xffffb52f8143 in g_strdup (/usr/lib64/libglib-2.0.so.0+0x74143)
#3 0xaaaac5244893 in migrate_params_test_apply (/usr/src/debug/qemu-4.1.0/migration/migration.c:1382)
#4 0xaaaac52fdca7 in qmp_migrate_set_parameters (/usr/src/debug/qemu-4.1.0/qapi/qapi-commands-migration.c:192)
#5 0xaaaac551d543 in qmp_dispatch (/usr/src/debug/qemu-4.1.0/qapi/qmp-dispatch.c)
#6 0xaaaac52a0a8f in qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:125)
#7 0xaaaac52a1c7f in monitor_qmp_dispatch (/usr/src/debug/qemu-4.1.0/monitor/qmp.c:214)
#8 0xaaaac55cb0cf in aio_bh_call (/usr/src/debug/qemu-4.1.0/util/async.c:117)
#9 0xaaaac55d4543 in aio_bh_poll (/usr/src/debug/qemu-4.1.0/util/aio-posix.c:459)
#10 0xaaaac55cae0f in in aio_dispatch (/usr/src/debug/qemu-4.1.0/util/async.c:268)
#11 0xffffb52d6a7b in g_main_context_dispatch (/usr/lib64/libglib-2.0.so.0+0x52a7b)
#12 0xaaaac55d1e3b(/usr/bin/qemu-kvm-4.1.0+0x1622e3b)
#13 0xaaaac4e314bb(/usr/bin/qemu-kvm-4.1.0+0xe824bb)
#14 0xaaaac47f45ef (/usr/bin/qemu-kvm-4.1.0+0x8455ef)
#15 0xffffb4bfef3f in __libc_start_main (/usr/lib64/libc.so.6+0x23f3f)
#16 0xaaaac47ffacb(/usr/bin/qemu-kvm-4.1.0+0x850acb)
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: KeQian Zhu <zhukeqian1@huawei.com>
Reviewed-by: HaiLiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
target-arm queue:
* hw/arm/bcm2836: Remove unused 'cpu_type' field
* target/arm: Fix mtedesc for do_mem_zpz
* Add the ability to change the FEC PHY MDIO device number on i.MX25/i.MX6/i.MX7
* target/arm: Don't do raw writes for PMINTENCLR
* virtio-iommu: Fix coverity issue in virtio_iommu_handle_command()
* build: Fix various issues with building on Haiku
* target/nios2: fix wrctl behaviour when using icount
* hw/arm/tosa: Encapsulate misc GPIO handling in a device
* hw/arm/palm.c: Encapsulate misc GPIO handling in a device
* hw/arm/aspeed: Do not create and attach empty SD cards by default
# gpg: Signature made Mon 13 Jul 2020 15:08:16 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200713: (25 commits)
hw/arm/aspeed: Do not create and attach empty SD cards by default
hw/arm/palm.c: Encapsulate misc GPIO handling in a device
hw/arm/palm.c: Detabify
hw/arm/tosa: Encapsulate misc GPIO handling in a device
hw/arm/tosa.c: Detabify
hw/nios2: exit to main CPU loop only when unmasking interrupts
target/nios2: Use gen_io_start around wrctl instruction
target/nios2: in line the semantics of DISAS_UPDATE with other targets
target/nios2: add DISAS_NORETURN case for nothing more to generate
util/drm: make portable by avoiding struct dirent d_type
util/oslib-posix.c: Implement qemu_init_exec_dir() for Haiku
util/compatfd.c: Only include <sys/syscall.h> if CONFIG_SIGNALFD
bswap.h: Include <endian.h> on Haiku for bswap operations
osdep.h: For Haiku, define SIGIO as equivalent to SIGPOLL
osdep.h: Always include <sys/signal.h> if it exists
build: Check that mlockall() exists
util/qemu-openpty.c: Don't assume pty.h is glibc-only
build: Enable BSD symbols for Haiku
virtio-iommu: Fix coverity issue in virtio_iommu_handle_command()
target/arm: Don't do raw writes for PMINTENCLR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only user (iotest 205) of QemuIoInteractive provides -f argument,
so it's a bit inefficient to use qemu_io_args, which contains -f too.
And we are going to add one more test, which wants to specify -f by
hand. Let's use qemu_io_args_no_fmt.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200701105331.121670-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Blindly setting FD_CLOEXEC without a read-modify-write will
inadvertently clear any other intentionally-set bits, such as a
proposed new bit for designating a fd that must behave in 32-bit mode.
Use our wrapper function instead of an incorrect hand-rolled version.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200420175309.75894-2-eblake@redhat.com>
Reviewed-by: Colin Xu <colin.xu@intel.com>
When snprintf returns the same value as the buffer size, the final
byte was truncated to ensure a NUL terminator. Fortunately, such long
export names are unusual enough, with no real impact other than what
is displayed to the user.
Fixes: 5c86bdf120
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200622210355.414941-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Since added in commit 2bea128c3d, each SDHCI is wired with a SD
card, using empty card when no block drive provided. This is not
the desired behavior. The SDHCI exposes a SD bus to plug cards
on, if no card available, it is fine to have an unplugged bus.
Avoid creating unnecessary SD card device when no block drive
provided.
Fixes: 2bea128c3d ("hw/sd/aspeed_sdhci: New device")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200705173402.15620-1-f4bug@amsat.org
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the free-floating set of IRQs and palmte_onoff_gpios()
function with a simple QOM device that encapsulates this
behaviour.
This fixes Coverity issue CID 1421944, which points out that
the memory returned by qemu_allocate_irqs() is leaked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628214230.2592-3-peter.maydell@linaro.org
Currently we have a free-floating set of IRQs and a function
tosa_out_switch() which handle the GPIO lines on the tosa board which
connect to LEDs, and another free-floating IRQ and tosa_reset()
function to handle the GPIO line that resets the system. Encapsulate
this behaviour in a simple QOM device.
This commit fixes Coverity issue CID 1421929 (which pointed out that
the 'outsignals' in tosa_gpio_setup() were leaked), because it
removes the use of the qemu_allocate_irqs() API from this code
entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628203748.14250-3-peter.maydell@linaro.org
Remove the hardcoded tabs from hw/arm/tosa.c. There aren't
many, but since they're all in constant #defines they're not
going to go away with our usual "only when we touch a function"
policy on reformatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628203748.14250-2-peter.maydell@linaro.org
wrctl instruction on nios2 target will cause checking cpu
interrupt but tcg_handle_interrupt() will call cpu_abort()
if the CPU gets an interrupt while it's not in 'can do IO'
state, so add gen_io_start around wrctl instruction. Also
at the same time, end the onging TB with DISAS_UPDATE.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Message-id: 20200710233433.19729-3-wentong.wu@intel.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add DISAS_NORETURN case for nothing more to generate because at runtime
execution will never return from some helper call. And at the same time
replace DISAS_UPDATE in t_gen_helper_raise_exception and gen_exception
with the newly added DISAS_NORETURN.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Message-id: 20200710233433.19729-1-wentong.wu@intel.com
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Regularize our handling of <sys/signal.h>: currently we include it in
osdep.h, but only for OpenBSD, and we include it without an ifdef
guard in a couple of C files. This causes problems for Haiku, which
doesn't have that header.
Instead, check in configure whether sys/signal.h exists, and if it
does then always include it from osdep.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-5-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of assuming that all POSIX platforms provide mlockall(),
test for it in configure. If the host doesn't provide this platform
then os_mlock() will fail -ENOSYS, as it does already on Windows.
This is necessary for Haiku, which does not have mlockall().
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-4-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_MLOCKALL]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alexandre Mergnat