- do not abuse memory_region_allocate_system_memory and split the memory
according to KVM memslots in KVM code instead (Paolo, Igor)
- change splitting to split at 4TB (Christian)
- do not claim s390 (31bit) support in configure (Thomas)
- sclp error checking (Janosch, Claudio)
- new s390 pci maintainer (Matt, Collin)
- fix s390 pci (again) (Matt)
# gpg: Signature made Mon 30 Sep 2019 12:52:51 BST
# gpg: using RSA key 117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" [full]
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20190930:
s390/kvm: split kvm mem slots at 4TB
s390: do not call memory_region_allocate_system_memory() multiple times
kvm: split too big memory section on several memslots
kvm: clear dirty bitmaps from all overlapping memslots
kvm: extract kvm_log_clear_one_slot
configure: Remove s390 (31-bit mode) from the list of supported CPUs
s390x: sclp: Report insufficient SCCB length
s390x: sclp: fix error handling for oversize control blocks
s390x: sclp: boundary check
s390x: sclp: refactor invalid command check
s390: PCI: fix IOMMU region init
MAINTAINERS: Update S390 PCI Maintainer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of splitting at an unaligned address, we can simply split at
4TB.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
s390 was trying to solve limited KVM memslot size issue by abusing
memory_region_allocate_system_memory(), which breaks API contract
where the function might be called only once.
Beside an invalid use of API, the approach also introduced migration
issue, since RAM chunks for each KVM_SLOT_MAX_BYTES are transferred in
migration stream as separate RAMBlocks.
After discussion [1], it was agreed to break migration from older
QEMU for guest with RAM >8Tb (as it was relatively new (since 2.12)
and considered to be not actually used downstream).
Migration should keep working for guests with less than 8TB and for
more than 8TB with QEMU 4.2 and newer binary.
In case user tries to migrate more than 8TB guest, between incompatible
QEMU versions, migration should fail gracefully due to non-exiting
RAMBlock ID or RAMBlock size mismatch.
Taking in account above and that now KVM code is able to split too
big MemorySection into several memslots, partially revert commit
(bb223055b s390-ccw-virtio: allow for systems larger that 7.999TB)
and use kvm_set_max_memslot_size() to set KVMSlot size to
KVM_SLOT_MAX_BYTES.
1) [PATCH RFC v2 4/4] s390: do not call memory_region_allocate_system_memory() multiple times
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190924144751.24149-5-imammedo@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Max memslot size supported by kvm on s390 is 8Tb,
move logic of splitting RAM in chunks upto 8T to KVM code.
This way it will hide KVM specific restrictions in KVM code
and won't affect board level design decisions. Which would allow
us to avoid misusing memory_region_allocate_system_memory() API
and eventually use a single hostmem backend for guest RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190924144751.24149-4-imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On IBM Z, KVM in the kernel is only implemented for 64-bit mode, and
with regards to TCG, we also only support 64-bit host CPUs (see the
check at the beginning of tcg/s390/tcg-target.inc.c), so we should
remove s390 (without "x", i.e. the old 31-bit mode CPUs) from the
list of supported CPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190928190334.6897-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190927:
hw/arm/boot: Use the IEC binary prefix definitions
hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
tests/tcg: add linux-user semihosting smoke test for ARM
target/arm: remove run-time semihosting checks for linux-user
target/arm: remove run time semihosting checks
target/arm: handle A-profile semihosting at translate time
target/arm: handle M-profile semihosting at translate time
tests/tcg: clean-up some comments after the de-tangling
target/arm: fix CBAR register for AArch64 CPUs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/tcg/arm/Makefile.target
qapi-gen.py crashes when it can't open the main schema file, and when
it can't read from any schema file. Lazy.
Change QAPISchema.__init__() to take a file name instead of a file
object. Move the open code from _include() to __init__(), so it's
used for the main schema file, too.
Move the read into the try for good measure, and rephrase the error
message.
Reporting open or read failure for the main schema file needs a
QAPISourceInfo representing "no source". Make QAPISourceInfo cope
with fname=None.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-27-armbru@redhat.com>
check_if()'s errors don't point to the offending part of the
expression. For instance:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' makes no sense
Other check_FOO() do, with the help of a @source argument. Make
check_if() do that, too. The example above improves to:
tests/qapi-schema/alternate-branch-if-invalid.json:2: 'if' condition ' ' of 'data' member 'branch' makes no sense
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190927134639.4284-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Have check_exprs() call check_keys() later, so its error messages gain
an "in definition" line.
Both check_keys() and check_name_is_str() check the definition's name
is a string. Since check_keys() now runs after check_name_is_str()
rather than before, its check is dead. Bury it. Checking values in
check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-21-armbru@redhat.com>
Split check_flags() off check_keys() and have check_exprs() call it
later, so its error messages gain an "in definition" line. Tweak the
error messages.
Checking values in a function named check_keys() is unclean anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-20-armbru@redhat.com>
Move check_if() from check_keys() to check_exprs() and call it later,
so its error messages gain an "in definition" line.
Checking values in a function named check_keys() is unclean anyway.
The original sin was commit 0545f6b887 "qapi: Better error messages
for bad expressions", which checks the value of key 'name'. More
sinning in commit 2cbf09925a "qapi: More rigorous checking for type
safety bypass", commit c818408e44 "qapi: Implement boxed types for
commands/events", and commit 967c885108 "qapi: add 'if' to top-level
expressions". This commit does penance for the latter. The next
commits will do penance for the others.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-19-armbru@redhat.com>
QAPISchemaCommand.check() and QAPISchemaEvent().check() check 'data'
is present when 'boxed': true. That's context-free. Move to
check_command() and check_event().
Tweak the error message while there.
check_exprs() & friends now check exactly what qapi-code-gen.txt calls
the second layer of syntax.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-18-armbru@redhat.com>
When we introduced the QAPISchema intermediate representation (commit
ac88219a6c), we took a shortcut: we left check_exprs() & friends
alone instead of moving semantic checks into the
QAPISchemaFOO.check(). The .check() assert check_exprs() did its job.
Time to finish the conversion job. Move exactly the context-sensitive
checks to the .check(). They replace assertions there. Context-free
checks stay put.
Fixes the misleading optional tag error demonstrated by test
flat-union-optional-discriminator.
A few other error message improve.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-17-armbru@redhat.com>
check_name() consists of check_name_is_str() and check_name_str().
check_union() relies on the latter to catch optional discriminators.
The next commit will replace that by a more straightforward check.
Inlining check_name() into check_union() now should make that easier
to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-16-armbru@redhat.com>
check_type() checks the array's contents, then peels off the array and
falls through to the "not array" code without resetting allow_array
and allow_dict to False. Works because the peeled value is a string,
and allow_array and allow_dict aren't used then. Tidy up anyway:
recurse instead, defaulting allow_array and allow_dict to False.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-14-armbru@redhat.com>
The checks for reserved names are spread far and wide. Move one from
add_name() to new check_defn_name_str(). This is a first step towards
collecting them all in dedicated name checking functions next to
check_name().
While there, drop the quotes around the meta-type in
check_name_str()'s error messages: "'command' uses ... name 'NAME'"
becomes "command uses ... name 'NAME'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-13-armbru@redhat.com>
Split check_name() into check_name_is_str() and check_name_str(), keep
check_name() as a wrapper.
Move add_name()'s call into its caller check_exprs(), and inline.
This permits delaying check_name_str() there, so its error message
gains an "in definition" line.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-10-armbru@redhat.com>
Most check_FOO() take the thing being checked as first argument.
check_name(), check_type(), check_known_keys() don't. Clean that up.
While there, drop a "Todo" comment that should have been dropped in
commit 87adbbffd4 "qapi: add a dictionary form for TYPE".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-9-armbru@redhat.com>
We report name clashes like this:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: 'name' (member of Sub) collides with 'name' (member of Base)
The "(member of Sub)" is redundant with "In struct 'Sub'". Comes from
QAPISchemaMember.describe(). Pass info to it, so it can detect the
redundancy and avoid it. Result:
struct-base-clash.json: In struct 'Sub':
struct-base-clash.json:5: member 'name' collides with member 'name' of type 'Base'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-8-armbru@redhat.com>
Starting error messages with a capital letter complicates things when
text can get interpolated both at the beginning and in the middle of
an error message. The next patch will do that. Switch to lower case
to keep it simpler.
For what it's worth, the GNU Coding Standards advise the message
"should not begin with a capital letter when it follows a program name
and/or file name, because that isn’t the beginning of a sentence. (The
sentence conceptually starts at the beginning of the line.)"
While there, avoid breaking lines containing multiple arguments in the
middle of an argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-7-armbru@redhat.com>
QAPISchemaMember.check_clash() checks for member names that map to the
same c_name(). Takes care of rejecting duplicate names.
It also checks a naming rule: no uppercase in member names. That's a
rather odd place to do it. Enforcing naming rules is
check_name_str()'s job.
qapi-code-gen.txt specifies the name case rule applies to the name as
it appears in the schema. check_clash() checks c_name(name) instead.
No difference, as c_name() leaves alone case, but unclean.
Move the name case check into check_name_str(), less the c_name().
New argument @permit_upper suppresses it. Pass permit_upper=True for
definitions (which are not members), and when the member's owner is
whitelisted with pragma name-case-whitelist.
Bonus: name-case-whitelist now applies to a union's inline base, too.
Update qapi/qapi-schema.json pragma to whitelist union CpuInfo instead
of CpuInfo's implicit base type's name q_obj_CpuInfo-base.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-6-armbru@redhat.com>
We take pains to include the offending expression in error messages,
e.g.
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
But not always:
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Instead of improving them one by one, report the offending expression
whenever it is known, like this:
tests/qapi-schema/enum-if-invalid.json: In enum 'TestIfEnum':
tests/qapi-schema/enum-if-invalid.json:2: 'if' condition must be a string or a list of strings
Error messages that mention the offending expression become a bit
redundant, e.g.
tests/qapi-schema/alternate-any.json: In alternate 'Alt':
tests/qapi-schema/alternate-any.json:2: alternate 'Alt' member 'one' cannot use type 'any'
I'll take care of that later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-5-armbru@redhat.com>
We track source locations with a dict of the form
{'file': FNAME, 'line': LINENO, 'parent': PARENT}
where PARENT is None for the main file, and the include directive's
source location for included files.
This is serviceable enough, but the next commit will add information,
and that's going to come out cleaner if we turn this into a class. So
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-4-armbru@redhat.com>
QAPISchemaMember.owner is the name of the defining entity. That's a
confusing name when an object type inherits members from a base type.
Rename it to .defined_in. Rename .set_owner() and ._pretty_owner() to
match.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-3-armbru@redhat.com>
When we introduced the QAPISchema intermediate representation (commit
ac88219a6c), we took a shortcut: we left check_exprs() & friends
alone instead of moving semantic checks into the
QAPISchemaFOO.check(). check_exprs() still checks and reports errors,
and the .check() assert check_exprs() did the job. There are a few
gaps, though.
QAPISchemaArrayType.check() neglects to assert the element type is not
an array. Add the assertion.
QAPISchemaObjectTypeVariants.check() neglects to assert the tag member
is not optional. Add the assertion.
It neglects to assert the tag member is not conditional. Add the
assertion.
It neglects to assert we actually have variants. Add the assertion.
It asserts the variants are object types, but neglects to assert they
don't have variants. Tighten the assertion.
QAPISchemaObjectTypeVariants.check_clash() has the same issue.
However, it can run only after .check(). Delete the assertion instead
of tightening it.
QAPISchemaAlternateType.check() neglects to assert the branch types
don't conflict. Fixing that isn't trivial, so add just a TODO comment
for now. It'll be resolved later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190927134639.4284-2-armbru@redhat.com>
If a command is disabled an error is reported. But due to usage of
error_setg() the class of the error is GenericError which does not
help callers in distinguishing this case from a case where a qmp
command fails regularly due to other reasons.
We used to use class CommandDisabled until the great error
simplification (commit de253f1491 for QMP and commit 93b91c59db for
qemu-ga, both v1.2.0).
Use CommandNotFound error class, which is close enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <faeb030e6a1044f0fd88208edfdb1c5fafe5def9.1567171655.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Test update squashed in, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Refactoring of LUKS support to facilitate keyslot updates
No current functional change is expected with this series.
# gpg: Signature made Fri 27 Sep 2019 10:58:54 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/qcrypto-next-pull-request:
qcrypto-luks: more rigorous header checking
qcrypto-luks: simplify the math used for keyslot locations
qcrypto-luks: extract store key function
qcrypto-luks: extract check and parse header
qcrypto-luks: extract store and load header
qcrypto-luks: purge unused error codes from open callback
qcrypto-luks: use the parsed encryption settings in QCryptoBlockLUKS
qcrypto-luks: pass keyslot index rather that pointer to the keyslot
qcrypto-luks: simplify masterkey and masterkey length
qcrypto-luks: don't overwrite cipher_mode in header
qcrypto-luks: rename some fields in QCryptoBlockLUKSHeader
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we're booting a Linux kernel directly into Non-Secure
state on a CPU which has Secure state, then make sure we
set the NSACR CP11 and CP10 bits, so that Non-Secure is allowed
to access the FPU. Otherwise an AArch32 kernel will UNDEF as
soon as it tries to use the FPU.
It used to not matter that we didn't do this until commit
fc1120a7f5, where we implemented actually honouring
these NSACR bits.
The problem only exists for CPUs where EL3 is AArch32; the
equivalent AArch64 trap bits are in CPTR_EL3 and are "0 to
not trap, 1 to trap", so the reset value of the register
permits NS access, unlike NSACR.
Fixes: fc1120a7f5
Fixes: https://bugs.launchpad.net/qemu/+bug/1844597
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190920174039.3916-1-peter.maydell@linaro.org
Now we do all our checking at translate time we can make cpu_loop a
little bit simpler. We also introduce a simple linux-user semihosting
test case to defend the functionality. The out-of-tree softmmu based
semihosting tests are still more comprehensive.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-6-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marc-André Lureau