We already have 030 for that in general, but this tests very specific
cases of both jobs finishing concurrently.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for what happens when you call bdrv_replace_child_noperm()
for various drain situations ({old,new} child {drained,not drained}).
Most importantly, if both the old and the new child are drained, the
parent must not be undrained at any point.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, bdrv_replace_child_noperm() undrains the parent until it is
completely undrained, then re-drains it after attaching the new child
node.
This is a problem with bdrv_drop_intermediate(): We want to keep the
whole subtree drained, including parents, while the operation is
under way. bdrv_replace_child_noperm() breaks this by allowing every
parent to become unquiesced briefly, and then redraining it.
In fact, there is no reason why the parent should become unquiesced and
be allowed to submit requests to the new child node if that new node is
supposed to be kept drained. So if anything, we have to drain the
parent before detaching the old child node. Conversely, we have to
undrain it only after attaching the new child node.
Thus, change the whole drain algorithm here: Calculate the number of
times we have to drain/undrain the parent before replacing the child
node then drain it (if necessary), replace the child node, and then
undrain it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_drop_intermediate() calls BdrvChildRole.update_filename(). That
may poll, thus changing the graph, which potentially breaks the
QLIST_FOREACH_SAFE() loop.
Just keep the whole subtree drained. This is probably the right thing
to do anyway (dropping nodes while the subtree is not drained seems
wrong).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The same change as commit 2b23f28639 ('block/copy-on-read: Fix
permissions for inactive node') made for the copy-on-read driver can be
made for bdrv_filter_default_perms(): Retaining the old permissions from
the BdrvChild if it is given complicates things unnecessarily when in
the end this only means that the options set in the c == NULL case (i.e.
during child creation) are retained.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This test case is motivated by commit 2b23f28639 ('block/copy-on-read:
Fix permissions for inactive node'). Instead of just testing
copy-on-read on migration, let's stack all sorts of filter nodes on top
of each other and try if the resulting VM can still migrate
successfully. For good measure, put everything into an iothread, because
why not?
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
234 implements functions that are useful for doing migration between two
VMs. Move them to iotests.py so that other test cases can use them, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The code path for -device drive=<node-name> or without a drive=...
option for empty drives, which is supposed to be used with -blockdev
differs enough from the -drive based path with a user-owned
BlockBackend, so we want to test both paths at least for the basic tests
implemented by TestInitiallyFilled and TestInitiallyEmpty.
This would have caught the bug recently fixed for inserting read-only
nodes into a scsi-cd created without a drive=... option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We're getting a ridiculous number of child classes of
TestInitiallyFilled and TestInitiallyEmpty that differ only in a few
attributes that we want to test in all combinations.
Instead of explicitly writing down every combination, let's use a loop
and create those classes dynamically.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
We'll need some connection parameters to be available all the time to
implement nbd reconnect. So, let's refactor them: define additional
parameters in BDRVNBDState, drop them from function parameters, drop
nbd_client_init and separate options parsing instead from nbd_open.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190618114328.55249-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Drop useless 'if' before object_unref]
Signed-off-by: Eric Blake <eblake@redhat.com>
To implement reconnect we need several states for the client:
CONNECTED, QUIT and two different CONNECTING states. CONNECTING states
will be added in the following patches. This patch implements CONNECTED
and QUIT.
QUIT means, that we should close the connection and fail all current
and further requests (like old quit = true).
CONNECTED means that connection is ok, we can send requests (like old
quit = false).
For receiving loop we use a comparison of the current state with QUIT,
because reconnect will be in the same loop, so it should be looping
until the end.
Opposite, for requests we use a comparison of the current state with
CONNECTED, as we don't want to send requests in future CONNECTING
states.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The normal libqtest library functions should never depend on global_qtest.
Pass in the test state via parameter instead. And while we're at it,
also rename this function to qtest_qmp_assert_success() to make it clear
that it is part of libqtest.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190813093047.27948-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
No test is using hmp() anymore, and since this function uses the disliked
global_qtest variable, we should also make sure that nobody adds new code
with this function again. qtest_hmp() should be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190813093047.27948-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The libqos library functions should never depend on global_qtest,
since these functions might be used in tests that track multiple
test states. So let's use the test state of the QPCIDevice instead.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190813093047.27948-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The libqos library functions should never depend on global_qtest,
since these functions might be used in tests that track multiple
test states. Pass around a pointer to the QTestState instead.
Message-Id: <20190814195920.32023-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch fix a multifd migration bug in migration speed calculation, this
problem can be reproduced as follows:
1. start a vm and give a heavy memory write stress to prevent the vm be
successfully migrated to destination
2. begin a migration with multifd
3. migrate for a long time [actually, this can be measured by transferred bytes]
4. migrate cancel
5. begin a new migration with multifd, the migration will directly run into
migration_completion phase
Reason as follows:
Migration update bandwidth and s->threshold_size in function
migration_update_counters after BUFFER_DELAY time:
current_bytes = migration_total_bytes(s);
transferred = current_bytes - s->iteration_initial_bytes;
time_spent = current_time - s->iteration_start_time;
bandwidth = (double)transferred / time_spent;
s->threshold_size = bandwidth * s->parameters.downtime_limit;
In multifd migration, migration_total_bytes function return
qemu_ftell(s->to_dst_file) + ram_counters.multifd_bytes.
s->iteration_initial_bytes will be initialized to 0 at every new migration,
but ram_counters is a global variable, and history migration data will be
accumulated. So if the ram_counters.multifd_bytes is big enough, it may lead
pending_size >= s->threshold_size become false in migration_iteration_run
after the first migration_update_counters.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564741121-1840-1-git-send-email-ivanren@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The purpose of the calculation is to find a HostPage which is partially
dirty.
* fixup_start_addr points to the start of the HostPage to discard
* run_start points to the next HostPage to check
While in the middle stage, there would two cases for run_start:
* aligned with HostPage means this is not partially dirty
* not aligned means this is partially dirty
When it is aligned, no work and calculation is necessary. run_start
already points to the start of next HostPage and is ready to continue.
When it is not aligned, the calculation could be simplified with:
* fixup_start_addr = QEMU_ALIGN_DOWN(run_start, host_ratio)
* run_start = QEMU_ALIGN_UP(run_start, host_ratio)
By doing so, run_start always points to the next HostPage to check.
fixup_start_addr always points to the HostPage to discard.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190806004648.8659-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In postcopy-ram.c, we provide three functions to discard certain
RAMBlock range:
* postcopy_discard_send_init()
* postcopy_discard_send_range()
* postcopy_discard_send_finish()
Currently, we allocate/deallocate PostcopyDiscardState for each RAMBlock
on sending discard information to destination. This is not necessary and
the same data area could be reused for each RAMBlock.
This patch defines PostcopyDiscardState a static variable. By doing so:
1) avoid memory allocation and deallocation to the system
2) avoid potential failure of memory allocation
3) hide some details for their users
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190724010721.2146-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
LOADVM_QUIT allows a command to quit all layers of nested loadvm loops,
while current return value check is not that proper even it works now.
Current return value check "ret & LOADVM_QUIT" would return true if
bit[0] is 1. This would be true when ret is -1 which is used to indicate
an error of handling a command.
Since there is only one place return LOADVM_QUIT and no other
combination of return value, use "ret == LOADVM_QUIT" would be more
proper.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718064257.29218-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Max Reitz