QEMU object model is scarse in documentation. Some calls are
recursive, and it might be hard to figure out even trivial issues.
We can avoid developers to waste time in a debugging session by
displaying a simple error message.
This commit is also similar to e02bdf1cec ("Display more helpful
message when an object type is missing").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200121110349.25842-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To ease review/modifications of this Makefile, group generic
objects first, then system-mode specific ones, and finally
peripherals (which are only used in system-mode).
No logical changes introduced here.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200118140619.26333-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restrict all the system emulation and tools objects with a
Makefile IF (CONFIG_SOFTMMU OR CONFIG_TOOLS) check.
Using the same description over and over is not very helpful.
Use it once, just before the if() block.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200118140619.26333-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU user-mode also requires the qom/ objects, it is not only
used by "system emulation and qemu-img". As we will use a big
if() block, move it upper in the "Common libraries for tools
and emulators" section.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200118140619.26333-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only require libfdt for system emulation, in a small set
of architecture:
4077 # fdt support is mandatory for at least some target architectures,
4078 # so insist on it if we're building those system emulators.
4079 fdt_required=no
4080 for target in $target_list; do
4081 case $target in
4082 aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu|riscv*-softmmu)
4083 fdt_required=yes
Do not build libfdt if we did not manually specified --enable-fdt,
or have one of the platforms that require it in our target list.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200118140619.26333-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GCC9 is confused by this comment when building with CFLAG
-Wimplicit-fallthrough=2:
hw/net/imx_fec.c: In function ‘imx_eth_write’:
hw/net/imx_fec.c:906:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
906 | if (unlikely(single_tx_ring)) {
| ^
hw/net/imx_fec.c:912:5: note: here
912 | case ENET_TDAR: /* FALLTHROUGH */
| ^~~~
cc1: all warnings being treated as errors
Rewrite the comments in the correct place, using 'fall through'
which is recognized by GCC and static analyzers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191218192526.13845-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by GCC9 when building with CFLAG -Wimplicit-fallthrough=2:
hw/timer/aspeed_timer.c: In function ‘aspeed_timer_set_value’:
hw/timer/aspeed_timer.c:283:24: error: this statement may fall through [-Werror=implicit-fallthrough=]
283 | if (old_reload || !t->reload) {
| ~~~~~~~~~~~^~~~~~~~~~~~~
hw/timer/aspeed_timer.c:287:5: note: here
287 | case TIMER_REG_STATUS:
| ^~~~
cc1: all warnings being treated as errors
Add the missing fall through comment.
Fixes: 1403f36447
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191218192526.13845-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:
hw/display/tcx.c: In function ‘tcx_dac_writel’:
hw/display/tcx.c:453:26: error: this statement may fall through [-Werror=implicit-fallthrough=]
453 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:454:9: note: here
454 | default:
| ^~~~~~~
hw/display/tcx.c: In function ‘tcx_dac_readl’:
hw/display/tcx.c:412:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
412 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:413:5: note: here
413 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Give a hint to GCC by adding the missing fall through comments.
Fixes: 55d7bfe22
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20191218192526.13845-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:
audio/audio.c: In function ‘audio_pcm_init_info’:
audio/audio.c:306:14: error: this statement may fall through [-Werror=implicit-fallthrough=]
306 | sign = 1;
| ~~~~~^~~
audio/audio.c:307:5: note: here
307 | case AUDIO_FORMAT_U8:
| ^~~~
cc1: all warnings being treated as errors
Similarly to e46349414, add the missing fall through comment to
hint GCC.
Fixes: 2b9cce8c8c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191218192526.13845-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When adding new devices implementing QOM interfaces, we might
forgot to add the Kconfig dependency that pulls the required
objects in when building.
Since QOM dependencies are resolved at runtime, we don't get any
link-time failures, and QEMU aborts while starting:
$ qemu ...
Segmentation fault (core dumped)
(gdb) bt
#0 0x00007ff6e96b1e35 in raise () from /lib64/libc.so.6
#1 0x00007ff6e969c895 in abort () from /lib64/libc.so.6
#2 0x00005572bc5051cf in type_initialize (ti=0x5572be6f1200) at qom/object.c:323
#3 0x00005572bc505074 in type_initialize (ti=0x5572be6f1800) at qom/object.c:301
#4 0x00005572bc505074 in type_initialize (ti=0x5572be6e48e0) at qom/object.c:301
#5 0x00005572bc506939 in object_class_by_name (typename=0x5572bc56109a) at qom/object.c:959
#6 0x00005572bc503dd5 in cpu_class_by_name (typename=0x5572bc56109a, cpu_model=0x5572be6d9930) at hw/core/cpu.c:286
Since the caller has access to the qdev parent/interface names,
we can simply display them to avoid starting a debugger:
$ qemu ...
qemu: missing interface 'fancy-if' for object 'fancy-dev'
Aborted (core dumped)
This commit is similar to e02bdf1cec ("Display more helpful message
when an object type is missing").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200118162348.17823-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle bit 1 write, then post event to monitor.
Suggested by Paolo, declear a new event, using GUEST_PANICKED could
cause upper layers to react by shutting down or rebooting the guest.
In advance for extention, add GuestPanicInformation in event message.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add bit 1 for pvpanic. This bit means that guest hits a panic, but
guest wants to handle error by itself. Typical case: Linux guest runs
kdump in panic. It will help us to separate the abnormal reboot from
normal operation.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200114023102.612548-2-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RISC-V Patches for the 5.0 Soft Freeze, Part 1
This patch set contains a handful of collected fixes that I'd like to target
for the 5.0 soft freeze (I know that's a long way away, I just don't know what
else to call these):
* A fix for a memory leak initializing the sifive_u board.
* Fixes to privilege mode emulation related to interrupts and fstatus.
Notably absent is the H extension implementation. That's pretty much reviewed,
but not quite ready to go yet and I didn't want to hold back these important
fixes. This boots 32-bit and 64-bit Linux (buildroot this time, just for fun)
and passes "make check".
# gpg: Signature made Tue 21 Jan 2020 22:55:28 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf1:
target/riscv: update mstatus.SD when FS is set dirty
target/riscv: fsd/fsw doesn't dirty FP state
target/riscv: Fix tb->flags FS status
riscv: Set xPIE to 1 after xRET
riscv/sifive_u: fix a memory leak in soc_realize()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtiofsd first pull v2
Import our virtiofsd.
This pulls in the daemon to drive a file system connected to the
existing qemu virtiofsd device.
It's derived from upstream libfuse with lots of changes (and a lot
trimmed out).
The daemon lives in the newly created qemu/tools/virtiofsd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
drop the docs while we discuss where they should live
and we need to redo the manpage in anything but texi
# gpg: Signature made Thu 23 Jan 2020 16:45:18 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200123b: (108 commits)
virtiofsd: add some options to the help message
virtiofsd: stop all queue threads on exit in virtio_loop()
virtiofsd/passthrough_ll: Pass errno to fuse_reply_err()
virtiofsd: Convert lo_destroy to take the lo->mutex lock itself
virtiofsd: add --thread-pool-size=NUM option
virtiofsd: fix lo_destroy() resource leaks
virtiofsd: prevent FUSE_INIT/FUSE_DESTROY races
virtiofsd: process requests in a thread pool
virtiofsd: use fuse_buf_writev to replace fuse_buf_write for better performance
virtiofsd: add definition of fuse_buf_writev()
virtiofsd: passthrough_ll: Use cache_readdir for directory open
virtiofsd: Fix data corruption with O_APPEND write in writeback mode
virtiofsd: Reset O_DIRECT flag during file open
virtiofsd: convert more fprintf and perror to use fuse log infra
virtiofsd: do not always set FUSE_FLOCK_LOCKS
virtiofsd: introduce inode refcount to prevent use-after-free
virtiofsd: passthrough_ll: fix refcounting on remove/rename
libvhost-user: Fix some memtable remap cases
virtiofsd: rename inode->refcount to inode->nlookup
virtiofsd: prevent races with lo_dirp_put()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add following options to the help message:
- cache
- flock|no_flock
- norace
- posix_lock|no_posix_lock
- readdirplus|no_readdirplus
- timeout
- writeback|no_writeback
- xattr|no_xattr
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
dgilbert: Split cache, norace, posix_lock, readdirplus off
into our own earlier patches that added the options
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On guest graceful shutdown, virtiofsd receives VHOST_USER_GET_VRING_BASE
request from VMM and shuts down virtqueues by calling fv_set_started(),
which joins fv_queue_thread() threads. So when virtio_loop() returns,
there should be no thread is still accessing data in fuse session and/or
virtio dev.
But on abnormal exit, e.g. guest got killed for whatever reason,
vhost-user socket is closed and virtio_loop() breaks out the main loop
and returns to main(). But it's possible fv_queue_worker()s are still
working and accessing fuse session and virtio dev, which results in
crash or use-after-free.
Fix it by stopping fv_queue_thread()s before virtio_loop() returns,
to make sure there's no-one could access fuse session and virtio dev.
Reported-by: Qingming Su <qingming.su@linux.alibaba.com>
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
lo_copy_file_range() passes -errno to fuse_reply_err() and then fuse_reply_err()
changes it to errno again, so that subsequent fuse_send_reply_iov_nofree() catches
the wrong errno.(i.e. reports "fuse: bad error value: ...").
Make fuse_send_reply_iov_nofree() accept the correct -errno by passing errno
directly in lo_copy_file_range().
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@linux.alibaba.com>
dgilbert: Sent upstream and now Merged as aa1185e153f774f1df65
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
lo_destroy was relying on some implicit knowledge of the locking;
we can avoid this if we create an unref_inode that doesn't take
the lock and then grab it for the whole of the lo_destroy.
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add an option to control the size of the thread pool. Requests are now
processed in parallel by default.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that lo_destroy() is serialized we can call unref_inode() so that
all inode resources are freed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running with multiple threads it can be tricky to handle
FUSE_INIT/FUSE_DESTROY in parallel with other request types or in
parallel with themselves. Serialize FUSE_INIT and FUSE_DESTROY so that
malicious clients cannot trigger race conditions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce a thread pool so that fv_queue_thread() just pops
VuVirtqElements and hands them to the thread pool. For the time being
only one worker thread is allowed since passthrough_ll.c is not
thread-safe yet. Future patches will lift this restriction so that
multiple FUSE requests can be processed in parallel.
The main new concept is struct FVRequest, which contains both
VuVirtqElement and struct fuse_chan. We now have fv_VuDev for a device,
fv_QueueInfo for a virtqueue, and FVRequest for a request. Some of
fv_QueueInfo's fields are moved into FVRequest because they are
per-request. The name FVRequest conforms to QEMU coding style and I
expect the struct fv_* types will be renamed in a future refactoring.
This patch series is not optimal. fbuf reuse is dropped so each request
does malloc(se->bufsize), but there is no clean and cheap way to keep
this with a thread pool. The vq_lock mutex is held for longer than
necessary, especially during the eventfd_write() syscall. Performance
can be improved in the future.
prctl(2) had to be added to the seccomp whitelist because glib invokes
it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fuse_buf_writev() only handles the normal write in which src is buffer
and dest is fd. Specially if src buffer represents guest physical
address that can't be mapped by the daemon process, IO must be bounced
back to the VMM to do it by fuse_buf_copy().
Signed-off-by: Jun Piao <piaojun@huawei.com>
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Define fuse_buf_writev() which use pwritev and writev to improve io
bandwidth. Especially, the src bufs with 0 size should be skipped as
their mems are not *block_size* aligned which will cause writev failed
in direct io mode.
Signed-off-by: Jun Piao <piaojun@huawei.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Marc-André Lureau