Extend the hash benchmark so that it can validate all algorithms
supported by QEMU instead of being limited to sha256.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently if you attampt to create too large file with luks you
get the following error message:
Formatting 'test.luks', fmt=luks size=17592186044416 key-secret=sec0
qemu-img: test.luks: Could not resize file: File too large
While for raw format the error message is
qemu-img: test.img: The image size is too large for file format 'raw'
The reason for this is that qemu-img checks for errono of the failure,
and presents the later error when it is -EFBIG
However crypto generic code 'swallows' the errno and replaces it
with -EIO.
As an attempt to make it better, we can make luks driver,
detect -EFBIG and in this case present a better error message,
which is what this patch does
The new error message is:
qemu-img: error creating test.luks: The requested file size is too large
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1534898
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We can delete the redundant type conversion if
we set the the AES_KEY parameter with 'const' in
qcrypto_cipher_aes_ecb_(en|de)crypt() function.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Change condition from QCRYPTO_SECRET_FORMAT_RAW
to QCRYPTO_SECRET_FORMAT_BASE64 in if-operator, because
this is potential error if you add another format value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes the condition-check done by the "loaded" property
getter, such that the property returns true even when the
secret is loaded by the 'file' option.
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
ppc patch queue for 2020-04-07
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
# gpg: Signature made Thu 07 May 2020 06:00:55 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.1-20200507:
target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9
spapr_nvdimm: Tweak error messages
spapr_nvdimm.c: make 'label-size' mandatory
target/ppc: Add support for Radix partition-scoped translation
target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation
target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool
target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation
spapr: Don't allow unplug of NVLink2 devices
target/ppc: Assert if HV mode is set when running under a pseries machine
target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault()
target/ppc: Enforce that the root page directory size must be at least 5
spapr: Drop CAS reboot flag
spapr/cas: Separate CAS handling from rebuilding the FDT
spapr: Simplify selection of radix/hash during CAS
ppc/pnv: Add support for NMI interface
ppc/spapr: tweak change system reset helper
spapr: Don't check capabilities removed between CAS calls
target/ppc: Improve syscall exception logging
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting with Clang v9, -Wtype-limits is implemented and triggers a
few "result of comparison is always true" errors when compiling PPC32
targets.
The comparisons seem to be necessary only on PPC64, since the
else branch in PPC32 only has a "g_assert_not_reached();" in all cases.
This patch restructures the code so that the actual if/else is done on a
local flag variable, that is set accordingly for PPC64, and always
true for PPC32.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20200505183818.32688-2-dbuono@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The restrictions here (which are checked at pre-plug time) are PAPR
specific, rather than being inherent to the NVDIMM devices. Adjust the
error messages to be clearer about this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pseries machine does not support NVDIMM modules without label.
Attempting to do so, even if the overall block size is aligned with
256MB, will seg fault the guest kernel during NVDIMM probe. This
can be avoided by forcing 'label-size' to always be present for
sPAPR NVDIMMs.
The verification was put before the alignment check because the
presence of label-size affects the alignment calculation, so
it's not optimal to warn the user about an alignment error,
then about the lack of label-size, then about a new alignment
error when the user sets a label-size.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200413203628.31636-1-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Radix tree translation model currently supports process-scoped
translation for the PowerNV machine (Hypervisor mode) and for the
pSeries machine (Guest mode). Guests running under an emulated
Hypervisor (PowerNV machine) require a new type of Radix translation,
called partition-scoped, which is missing today.
The Radix tree translation is a 2 steps process. The first step,
process-scoped translation, converts an effective Address to a guest
real address, and the second step, partition-scoped translation,
converts a guest real address to a host real address.
There are difference cases to covers :
* Hypervisor real mode access: no Radix translation.
* Hypervisor or host application access (quadrant 0 and 3) with
relocation on: process-scoped translation.
* Guest OS real mode access: only partition-scoped translation.
* Guest OS real or guest application access (quadrant 0 and 3) with
relocation on: both process-scoped translation and partition-scoped
translations.
* Hypervisor access in quadrant 1 and 2 with relocation on: both
process-scoped translation and partition-scoped translations.
The radix tree partition-scoped translation is performed using tables
pointed to by the first double-word of the Partition Table Entries and
process-scoped translation uses tables pointed to by the Process Table
Entries (second double-word of the Partition Table Entries).
Both partition-scoped and process-scoped translations process are
identical and thus the radix tree traversing code is largely reused.
However, errors in partition-scoped translations generate hypervisor
exceptions.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200403140056.59465-5-clg@kaod.org>
[dwg: Fixup from Greg Kurz folded in]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ppc_radix64_walk_tree() routine walks through the nested radix
tables to look for a PTE.
Split it in two and introduce a new routine ppc_radix64_next_level()
which we will use for partition-scoped Radix translation when
translating the process tree addresses. The prototypes are slightly
change to use a 'AddressSpace *' parameter, instead of a 'PowerPCCPU *'
which is not required, and to return an error code instead of a PTE
value. It clarifies error handling in the callers.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200403140056.59465-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is moving code under a new ppc_radix64_xlate() routine shared by
the MMU Radix page fault handler and the 'get_phys_page_debug' PPC
callback. The difference being that 'get_phys_page_debug' does not
generate exceptions.
The specific part of process-scoped Radix translation is moved under
ppc_radix64_process_scoped_xlate() in preparation of the future support
for partition-scoped Radix translation. Routines raising the exceptions
now take a 'cause_excp' bool to cover the 'get_phys_page_debug' case.
It should be functionally equivalent.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200403140056.59465-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, we can't properly handle unplug of NVLink2 devices, because we
don't have code to tear down their special memory resources. There's not
a lot of impetus to implement that: since hardware NVLink2 devices can't
be hot unplugged, the guest side drivers don't usually support unplug
anyway.
Therefore, simply prevent unplug of NVLink2 devices.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The CAS reboot flag is false by default and all the locations that
could set it to true have been dropped. This means that all code
blocks depending on the flag being set is dead code and the other
code blocks should be executed always.
Just do that and drop the now uneeded CAS reboot flag. Fix a
comment on the way to make checkpatch happy.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994893.478799.11772512888322840990.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment "ibm,client-architecture-support" ("CAS") is implemented
in SLOF and QEMU assists via the custom H_CAS hypercall which copies
an updated flatten device tree (FDT) blob to the SLOF memory which
it then uses to update its internal tree.
When we enable the OpenFirmware client interface in QEMU, we won't need
to copy the FDT to the guest as the client is expected to fetch
the device tree using the client interface.
This moves FDT rebuild out to a separate helper which is going to be
called from the "ibm,client-architecture-support" handler and leaves
writing FDT to the guest in the H_CAS handler.
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200310050733.29805-3-aik@ozlabs.ru>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994229.478799.2178881312094922324.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The guest can select the MMU mode by setting bits 0-1 of byte 24
in OV5 to to 0b00 for hash or 0b01 for radix. As required by the
architecture, we terminate the boot process if any other value
is found there.
The usual way to negotiate features in OV5 is basically ANDing
the bitfield provided by the guest and the bitfield of features
supported by QEMU, previously populated at machine init.
For some not documented reason, MMU is treated differently : bit 1
of byte 24 (the radix/hash bit) is cleared from the guest OV5 and
explicitely set in the final negotiated OV5 if radix was requested.
Since the only expected input from the guest is the radix/hash bit
being set or not, it seems more appropriate to handle this like we
do for XIVE.
Set the radix bit in spapr->ov5 at machine init if it has a chance
to work (ie. power9, either TCG or a radix capable KVM) and rely
exclusively on spapr_ovec_intersect() to set the radix bit in
spapr->ov5_cas.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514993621.478799.4204740354545734293.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than have the helper take an optional vector address
override, instead have its caller modify env->nip itself.
This is more consistent when adding pnv nmi support, and also
with mce injection added later.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200325144147.221875-2-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We currently check if some capability in OV5 was removed by the guest
since the previous CAS, and we trigger a CAS reboot in that case. This
was required because it could call for a device-tree property or node
removal, that we didn't support until recently (see commit 6787d27b04
"spapr: add option vector handling in CAS-generated resets" for details).
Now that we render a full FDT at CAS and that SLOF is able to handle
node removal, we don't need to do a CAS reset in this case anymore.
Also, this check can only return true if the guest has already called
CAS since the last full system reset (otherwise spapr->ov5_cas is
empty). Linux doesn't do that so this can be considered as dead code
for the vast majority of existing setups.
Drop the check. Since the only use of the ov5_cas_old variable is
precisely the check itself, drop the variable as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514993021.478799.10928618293640651819.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
system calls (at least in Linux) use registers r3-r8 for inputs, so
include those registers in the dump.
This also adds a mode for PAPR hcalls, which have a different calling
convention.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200317054918.199161-1-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Merge tpm 2020/05/06 v1
# gpg: Signature made Wed 06 May 2020 15:16:17 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-05-06-1:
hw: add compat machines for 5.1
hw/arm/virt: Remove the compat forcing tpm-tis-device PPI to off
tpm: tpm-tis-device: set PPI to false by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the benefit of compatibility of function pointer types,
we have standardized on int32_t and int64_t as the integral
argument to tcg expanders.
We converted most of them in 474b2e8f0f, but missed the rotates.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have this same parameter for GVecGen2i, GVecGen3,
and GVecGen3i. This will make some SVE2 insns easier
to parameterize.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The gen_gvec_dupi switch is unnecessary with the new function.
Replace it with a local gen_gvec_dup_imm that takes care of the
register to offset conversion and length arguments.
Drop zero_vec and use use gen_gvec_dup_imm with 0.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a version of tcg_gen_dup_* that takes both immediate and
a vector element size operand. This will replace the set of
tcg_gen_gvec_dup{8,16,32,64}i functions that encode the element
size within the function name.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull request for RegisterAPI
This is a single patch to add support to the RegisterAPI for different
data sizes.
# gpg: Signature made Wed 06 May 2020 00:08:15 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-reg-to-apply-20200505:
hw/core/register: Add register_init_block8 helper.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Testing and gdbstub updates:
- travis: drop macosx, tweak ppc64 native
- cirrus: fix FreeBSD, guard against future breakage
- gdbstub: support socket debug for linux-user
- gdbstub: add multiarch tests
- gdbstub: fixes for m68k
# gpg: Signature made Wed 06 May 2020 09:33:17 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-060520-1:
target/m68k: fix gdb for m68xxx
tests/tcg: add a multiarch linux-user gdb test
tests/guest-debug: use the unix socket for linux-user tests
gdbstub/linux-user: support debugging over a unix socket
gdbstub: eliminate gdbserver_fd global
tests/tcg: drop inferior.was_attached() test
tests/tcg: better trap gdb failures
gdbstub: Introduce gdb_get_float64() to get 64-bit float registers
configure: favour gdb-multiarch if we have it
.travis.yml: reduce the load on [ppc64] GCC check-tcg
.cirrus.yml: bootstrap pkg unconditionally
.cirrus.yml: bump FreeBSD to the current stable release
.travis.yml: drop MacOSX
.travis.yml: show free disk space at end of run
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently "cf-core.xml" is sent to GDB when using any m68k flavor. Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.
This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:
(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes): \
00000000000[...]0000
With this patch: qemu-system-m68k -M none -cpu m68020 -s -S
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
When the gdbstub code was converted to the new API we missed a few
snafus in the various guests. Add a simple gdb test script which can
be used on all our linux-user guests to check for obvious failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-9-alex.bennee@linaro.org>
Philippe Mathieu-Daudé