Without python3-venv, I get the following message when trying to
run the acceptance tests within the debian container:
The virtual environment was not created successfully because ensurepip is not
available. On Debian/Ubuntu systems, you need to install the python3-venv
package using the following command.
apt-get install python3-venv
You may need to use sudo with that command. After installing the python3-venv
package, recreate your virtual environment.
Let's do it as the message suggests.
And while we're at it, also add netcat here since it is required for
some of the acceptance tests.
Message-Id: <20200730141326.8260-2-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This likely affects other, less popular host architectures as well.
Less common host architectures under linux get QEMU_VMALLOC_ALIGN (from
which VIRTIO_MEM_MIN_BLOCK_SIZE is derived) define to a variable of
type uintptr, which isn't compatible with the format specifier used to
print a user message. Since this particular usage of the underlying data
seems unique to this file, the simple fix is to just cast
QEMU_VMALLOC_ALIGN to uint32_t, which corresponds to the format specifier
used.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-Id: <20200730130519.168475-1-brogers@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Fix the following runtime warning with artist framebuffer:
"write outside bounds: wants 1256x1023, max size 1280x1024"
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
It's important that the SeaBIOS hppa firmware is at least at a minimal
level to ensure proper interaction between qemu and firmware.
Implement a proper firmware version check by telling SeaBIOS via the
fw_cfg interface which minimal SeaBIOS version is required by this
running qemu instance. If the firmware detects that it's too old, it
will stop.
Signed-off-by: Helge Deller <deller@gmx.de>
Changes include:
* gcc-10 compile fix
* NetBSD boot fix due to wrong power button address
* Fix endian bug in romfile_loadint()
* Introduce SeaBIOS firmware version check
* Implement QEMU fw_cfg interface support
Required for proper version checking and gcc-10 update on Debian.
Signed-off-by: Helge Deller <deller@gmx.de>
CONFIG_XEN is generated by configure and stored in "config-target.h",
which is (obviously) only include for target-specific objects.
This is a problem for target-agnostic objects as CONFIG_XEN is never
defined and xen_enabled() is always inlined as 'false'.
Fix by following the KVM schema, defining CONFIG_XEN_IS_POSSIBLE
when we don't know to force the call of the non-inlined function,
returning the xen_allowed boolean.
Fixes: da278d58a0 ("accel: Move Xen accelerator code under accel/xen/")
Reported-by: Paul Durrant <pdurrant@amazon.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200804074930.13104-2-philmd@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
# gpg: Signature made Tue 04 Aug 2020 07:15:08 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
hw/net/net_tx_pkt: fix assertion failure in net_tx_pkt_add_raw_fragment()
colo-compare: Remove superfluous NULL-pointer checks for s->iothread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An assertion failure issue was found in the code that processes network packets
while adding data fragments into the packet context. It could be abused by a
malicious guest to abort the QEMU process on the host. This patch replaces the
affected assert() with a conditional statement, returning false if the current
data fragment exceeds max_raw_frags.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
target-arm queue:
* hw/timer/imx_epit: Avoid assertion when CR.SWR is written
* netduino2, netduinoplus2, microbit: set system_clock_scale so that
SysTick running on the CPU clock works
* target/arm: Avoid maybe-uninitialized warning with gcc 4.9
* target/arm: Fix AddPAC error indication
* Make AIRCR.SYSRESETREQ actually reset the system for the
microbit, mps2-*, musca-*, netduino* boards
# gpg: Signature made Mon 03 Aug 2020 20:29:17 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200803:
hw/timer/imx_epit: Avoid assertion when CR.SWR is written
hw/arm/nrf51_soc: Set system_clock_scale
target/arm: Avoid maybe-uninitialized warning with gcc 4.9
target/arm: Fix AddPAC error indication
msf2-soc, stellaris: Don't wire up SYSRESETREQ
hw/intc/armv7m_nvic: Provide default "reset the system" behaviour for SYSRESETREQ
include/hw/irq.h: New function qemu_irq_is_connected()
hw/arm/netduino2, netduinoplus2: Set system_clock_scale
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The imx_epit device has a software-controllable reset triggered by
setting the SWR bit in the CR register. An error in commit cc2722ec83
means that we will end up assert()ing if the guest does this, because
the code in imx_epit_write() starts ptimer transactions, and then
imx_epit_reset() also starts ptimer transactions, triggering
"ptimer_transaction_begin: Assertion `!s->in_transaction' failed".
The cleanest way to avoid this double-transaction is to move the
start-transaction for the CR write handling down below the check of
the SWR bit.
Fixes: https://bugs.launchpad.net/qemu/+bug/1880424
Fixes: cc2722ec83
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200727154550.3409-1-peter.maydell@linaro.org
The nrf51 SoC model wasn't setting the system_clock_scale
global.which meant that if guest code used the systick timer in "use
the processor clock" mode it would hang because time never advances.
Set the global to match the documented CPU clock speed for this SoC.
This SoC in fact doesn't have a SysTick timer (which is the only thing
currently that cares about the system_clock_scale), because it's
a configurable option in the Cortex-M0. However our Cortex-M0 and
thus our nrf51 and our micro:bit board do provide a SysTick, so
we ought to provide a functional one rather than a broken one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200727193458.31250-1-peter.maydell@linaro.org
GCC version 4.9.4 isn't clever enough to figure out that all
execution paths in disas_ldst() that use 'fn' will have initialized
it first, and so it warns:
/home/LiKaige/qemu/target/arm/translate-a64.c: In function ‘disas_ldst’:
/home/LiKaige/qemu/target/arm/translate-a64.c:3392:5: error: ‘fn’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
fn(cpu_reg(s, rt), clean_addr, tcg_rs, get_mem_index(s),
^
/home/LiKaige/qemu/target/arm/translate-a64.c:3318:22: note: ‘fn’ was declared here
AtomicThreeOpFn *fn;
^
Make it happy by initializing the variable to NULL.
Signed-off-by: Kaige Li <likaige@loongson.cn>
Message-id: 1596110248-7366-2-git-send-email-likaige@loongson.cn
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Clean up commit message and note which gcc version this was]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition of top_bit used in this function is one higher
than that used in the Arm ARM psuedo-code, which put the error
indication at top_bit - 1 at the wrong place, which meant that
it wasn't visible to Auth.
Fixing the definition of top_bit requires more changes, because
its most common use is for the count of bits in top_bit:bot_bit,
which would then need to be computed as top_bit - bot_bit + 1.
For now, prefer the minimal fix to the error indication alone.
Fixes: 63ff0ca94c
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200728195706.11087-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about the divergence from the pseudocode]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MSF2 SoC model and the Stellaris board code both wire
SYSRESETREQ up to a function that just invokes
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
This is now the default action that the NVIC does if the line is
not connected, so we can delete the handling code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200728103744.6909-4-peter.maydell@linaro.org
The NVIC provides an outbound qemu_irq "SYSRESETREQ" which it signals
when the guest sets the SYSRESETREQ bit in the AIRCR register. This
matches the hardware design (where the CPU has a signal of this name
and it is up to the SoC to connect that up to an actual reset
mechanism), but in QEMU it mostly results in duplicated code in SoC
objects and bugs where SoC model implementors forget to wire up the
SYSRESETREQ line.
Provide a default behaviour for the case where SYSRESETREQ is not
actually connected to anything: use qemu_system_reset_request() to
perform a system reset. This will allow us to remove the
implementations of SYSRESETREQ handling from the boards where that's
exactly what it does, and also fixes the bugs in the board models
which forgot to wire up the signal:
* microbit
* mps2-an385
* mps2-an505
* mps2-an511
* mps2-an521
* musca-a
* musca-b1
* netduino
* netduinoplus2
We still allow the board to wire up the signal if it needs to, in case
we need to model more complicated reset controller logic or to model
buggy SoC hardware which forgot to wire up the line itself. But
defaulting to "reset the system" is more often going to be correct
than defaulting to "do nothing".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200728103744.6909-3-peter.maydell@linaro.org
Mostly devices don't need to care whether one of their output
qemu_irq lines is connected, because functions like qemu_set_irq()
silently do nothing if there is nothing on the other end. However
sometimes a device might want to implement default behaviour for the
case where the machine hasn't wired the line up to anywhere.
Provide a function qemu_irq_is_connected() that devices can use for
this purpose. (The test is trivial but encapsulating it in a
function makes it easier to see where we're doing it in case we need
to change the implementation later.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200728103744.6909-2-peter.maydell@linaro.org
The netduino2 and netduinoplus2 boards forgot to set the system_clock_scale
global, which meant that if guest code used the systick timer in "use
the processor clock" mode it would hang because time never advances.
Set the global to match the documented CPU clock speed of these boards.
Judging by the data sheet this is slightly simplistic because the
SoC allows configuration of the SYSCLK source and frequency via the
RCC (reset and clock control) module, but we don't model that.
Fixes: https://bugs.launchpad.net/qemu/+bug/1876187
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200727162617.26227-1-peter.maydell@linaro.org
During migration, we release all bitmaps after storing them on disk, as
long as they are (1) stored on disk, (2) not read-only, and (3)
consistent.
(2) seems arbitrary, though. The reason we do not release them is
because we do not write them, as there is no need to; and then we just
forget about all bitmaps that we have not written to the file. However,
read-only persistent bitmaps are still in the file and in sync with
their in-memory representation, so we may as well release them just like
any R/W bitmap that we have updated.
It leads to actual problems, too: After migration, letting the source
continue may result in an error if there were any bitmaps on read-only
nodes (such as backing images), because those have not been released by
bdrv_inactive_all(), but bdrv_invalidate_cache_all() attempts to reload
them (which fails, because they are still present in memory).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200730120234.49288-2-mreitz@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The various schemas included in QEMU use a JSON-based format which
is, however, strictly speaking not valid JSON.
As a consequence, when vim tries to apply syntax highlight rules
for JSON (as guessed from the file name), the result is an unreadable
mess which mostly consist of red markers pointing out supposed errors
in, well, pretty much everything.
Using Python syntax highlighting produces much better results, and
in fact these files already start with specially-formatted comments
that instruct Emacs to process them as if they were Python files.
This commit adds the equivalent special comments for vim.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20200729185024.121766-1-abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In commit 176d2cda0d we added the @die-id field
to the CpuInstanceProperties struct, but in the process
accidentally removed the newline between the doc-comment
lines for @core-id and @thread-id.
Put the newline back in; this fixes a misformatting in the
generated HTML QMP reference manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200729191019.19168-1-peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
seabios master branch got a few bugfixes, so update
to a newer snapshot to pick them up for 5.1-rc3.
shortlog
========
Kevin O'Connor (2):
vgabios: Fix preserve memory flag in handle_1000
ldnoexec: Add script to remove ET_EXEC flag from intermediate build objects
Paul Menzel (1):
nvme: Increase `nvme_cmd_readwrite()` message log level from 3 to 5
Stefan Reiter (1):
virtio-scsi: fix boot prio detection by using correct lun
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The dtrace backend defines SDT_USE_VARIADIC as a workaround for a
conflict with a LTTng UST header file, which requires SDT_USE_VARIADIC
to be defined.
LTTng UST <lttng/tracepoint.h> breaks if included after generated dtrace
headers because SDT_USE_VARIADIC will already be defined:
#ifdef LTTNG_UST_HAVE_SDT_INTEGRATION
#define SDT_USE_VARIADIC <-- error, it's already defined
#include <sys/sdt.h>
Be more careful when defining SDT_USE_VARIADIC. This fixes the build
when both the dtrace and ust tracers are enabled at the same time.
Fixes: 27e08bab94 ("tracetool: work around ust <sys/sdt.h> include conflict")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200729153926.127083-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The simple trace backend is enabled / disabled with a call
to st_set_trace_file_enabled(). When initializing tracing
from the command-line, this must be enabled on startup.
(Prior to db25d56c01, command-line initialization of
simple trace worked because every call to st_set_trace_file
enabled tracing.)
Fixes: db25d56c01
Signed-off-by: Josh DuBois <josh@joshdubois.com>
Message-id: 20200723053359.256928-1-josh@joshdubois.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Want to send earlier but most patches just come.
- fix vhost-vdpa issues when no peer
- fix virtio-pci queue enabling index value
- forbid reentrant RX
Changes from V1:
- drop the patch that has been merged
# gpg: Signature made Tue 28 Jul 2020 09:59:41 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: forbid the reentrant RX
virtio-net: check the existence of peer before accessing vDPA config
virtio-pci: fix wrong index in virtio_pci_queue_enabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We try to go to wakeable sleep, so that, if drain begins it will break
the sleep. But what if nbd_client_co_drain_begin() already called and
s->drained is already true? We'll go to sleep, and drain will have to
wait for the whole timeout. Let's improve it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727184751.15704-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
On shutdown nbd driver may be in a connecting state. We should shutdown
it as well, otherwise we may hang in
nbd_teardown_connection, waiting for conneciton_co to finish in
BDRV_POLL_WHILE(bs, s->connection_co) loop if remote server is down.
How to reproduce the dead lock:
1. Create nbd-fault-injector.conf with the following contents:
[inject-error "mega1"]
event=data
io=readwrite
when=before
2. In one terminal run nbd-fault-injector in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./nbd-fault-injector.py 127.0.0.1:10000 nbd-fault-injector.conf;
done
3. In another terminal run qemu-io in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./qemu-io -c 'read 0 512' nbd://127.0.0.1:10000;
done
After some time, qemu-io will hang. Note, that this hang may be
triggered by another bug, so the whole case is fixed only together with
commit "block/nbd: allow drain during reconnect attempt".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727184751.15704-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It should be safe to reenter qio_channel_yield() on io/channel read/write
path, so it's safe to reduce in_flight and allow attaching new aio
context. And no problem to allow drain itself: connection attempt is
not a guest request. Moreover, if remote server is down, we can hang
in negotiation, blocking drain section and provoking a dead lock.
How to reproduce the dead lock:
1. Create nbd-fault-injector.conf with the following contents:
[inject-error "mega1"]
event=data
io=readwrite
when=before
2. In one terminal run nbd-fault-injector in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./nbd-fault-injector.py 127.0.0.1:10000 nbd-fault-injector.conf;
done
3. In another terminal run qemu-io in a loop, like this:
n=1; while true; do
echo $n; ((n++));
./qemu-io -c 'read 0 512' nbd://127.0.0.1:10000;
done
After some time, qemu-io will hang trying to drain, for example, like
this:
#3 aio_poll (ctx=0x55f006bdd890, blocking=true) at
util/aio-posix.c:600
#4 bdrv_do_drained_begin (bs=0x55f006bea710, recursive=false,
parent=0x0, ignore_bds_parents=false, poll=true) at block/io.c:427
#5 bdrv_drained_begin (bs=0x55f006bea710) at block/io.c:433
#6 blk_drain (blk=0x55f006befc80) at block/block-backend.c:1710
#7 blk_unref (blk=0x55f006befc80) at block/block-backend.c:498
#8 bdrv_open_inherit (filename=0x7fffba1563bc
"nbd+tcp://127.0.0.1:10000", reference=0x0, options=0x55f006be86d0,
flags=24578, parent=0x0, child_class=0x0, child_role=0,
errp=0x7fffba154620) at block.c:3491
#9 bdrv_open (filename=0x7fffba1563bc "nbd+tcp://127.0.0.1:10000",
reference=0x0, options=0x0, flags=16386, errp=0x7fffba154620) at
block.c:3513
#10 blk_new_open (filename=0x7fffba1563bc "nbd+tcp://127.0.0.1:10000",
reference=0x0, options=0x0, flags=16386, errp=0x7fffba154620) at
block/block-backend.c:421
And connection_co stack like this:
#0 qemu_coroutine_switch (from_=0x55f006bf2650, to_=0x7fe96e07d918,
action=COROUTINE_YIELD) at util/coroutine-ucontext.c:302
#1 qemu_coroutine_yield () at util/qemu-coroutine.c:193
#2 qio_channel_yield (ioc=0x55f006bb3c20, condition=G_IO_IN) at
io/channel.c:472
#3 qio_channel_readv_all_eof (ioc=0x55f006bb3c20, iov=0x7fe96d729bf0,
niov=1, errp=0x7fe96d729eb0) at io/channel.c:110
#4 qio_channel_readv_all (ioc=0x55f006bb3c20, iov=0x7fe96d729bf0,
niov=1, errp=0x7fe96d729eb0) at io/channel.c:143
#5 qio_channel_read_all (ioc=0x55f006bb3c20, buf=0x7fe96d729d28
"\300.\366\004\360U", buflen=8, errp=0x7fe96d729eb0) at
io/channel.c:247
#6 nbd_read (ioc=0x55f006bb3c20, buffer=0x7fe96d729d28, size=8,
desc=0x55f004f69644 "initial magic", errp=0x7fe96d729eb0) at
/work/src/qemu/master/include/block/nbd.h:365
#7 nbd_read64 (ioc=0x55f006bb3c20, val=0x7fe96d729d28,
desc=0x55f004f69644 "initial magic", errp=0x7fe96d729eb0) at
/work/src/qemu/master/include/block/nbd.h:391
#8 nbd_start_negotiate (aio_context=0x55f006bdd890,
ioc=0x55f006bb3c20, tlscreds=0x0, hostname=0x0,
outioc=0x55f006bf19f8, structured_reply=true,
zeroes=0x7fe96d729dca, errp=0x7fe96d729eb0) at nbd/client.c:904
#9 nbd_receive_negotiate (aio_context=0x55f006bdd890,
ioc=0x55f006bb3c20, tlscreds=0x0, hostname=0x0,
outioc=0x55f006bf19f8, info=0x55f006bf1a00, errp=0x7fe96d729eb0) at
nbd/client.c:1032
#10 nbd_client_connect (bs=0x55f006bea710, errp=0x7fe96d729eb0) at
block/nbd.c:1460
#11 nbd_reconnect_attempt (s=0x55f006bf19f0) at block/nbd.c:287
#12 nbd_co_reconnect_loop (s=0x55f006bf19f0) at block/nbd.c:309
#13 nbd_connection_entry (opaque=0x55f006bf19f0) at block/nbd.c:360
#14 coroutine_trampoline (i0=113190480, i1=22000) at
util/coroutine-ucontext.c:173
Note, that the hang may be
triggered by another bug, so the whole case is fixed only together with
commit "block/nbd: on shutdown terminate connection attempt".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200727184751.15704-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are going to implement non-blocking version of
nbd_establish_connection, which for a while will be used only for
nbd_reconnect_attempt, not for nbd_open, so we need to call it
separately.
Refactor nbd_reconnect_attempt in a way which makes next commit
simpler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200727184751.15704-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Thomas Huth