This patch adds a new 'coroutine' flag to QMP command definitions that
tells the QMP dispatcher that the command handler is safe to be run in a
coroutine.
The documentation of the new flag pretends that this flag is already
used as intended, which it isn't yet after this patch. We'll implement
this in another patch in this series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-9-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This way, a monitor command handler will still be able to access the
current monitor, but when it yields, all other code code will correctly
get NULL from monitor_cur().
This uses a hash table to map the coroutine pointer to the current
monitor of that coroutine. Outside of coroutine context, we associate
the current monitor with the leader coroutine of the current thread.
Approaches to implement some form of coroutine local storage directly in
the coroutine core code have been considered and discarded because they
didn't end up being much more generic than the hash table and their
performance impact on coroutines not using coroutine local storage was
unclear. As the block layer uses a coroutine per I/O request, this is a
fast path and we have to be careful. It's safest to just stay out of
this path with code only used by the monitor.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-8-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The current monitor is updated relatively early in the command handling
code even though only the command handler actually needs it.
The current monitor will become coroutine-local later, so we can only
update it when we know in which coroutine the command will be exectued.
Move it to handle_hmp_command() where this information will be
available.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A new function called spapr_numa_define_associativity_domains()
is created to calculate the associativity domains and change
the associativity arrays considering user input. This is how
the associativity domain between two NUMA nodes A and B is
calculated:
- get the distance D between them
- get the correspondent NUMA level 'n_level' for D. This is done
via a helper called spapr_numa_get_numa_level()
- all associativity arrays were initialized with their own
numa_ids, and we're calculating the distance in node_id ascending
order, starting from node id 0 (the first node retrieved by
numa_state). This will have a cascade effect in the algorithm because
the associativity domains that node 0 defines will be carried over to
other nodes, and node 1 associativities will be carried over after
taking node 0 associativities into account, and so on. This
happens because we'll assign assoc_src as the associativity domain
of dst as well, for all NUMA levels beyond and including n_level.
The PPC kernel expects the associativity domains of the first node
(node id 0) to be always 0 [1], and this algorithm will grant that
by default.
Ultimately, all of this results in a best effort approximation for
the actual NUMA distances the user input in the command line. Given
the nature of how PAPR itself interprets NUMA distances versus the
expectations risen by how ACPI SLIT works, there might be better
algorithms but, in the end, it'll also result in another way to
approximate what the user really wanted.
To keep this commit message no longer than it already is, the next
patch will update the existing documentation in ppc-spapr-numa.rst
with more in depth details and design considerations/drawbacks.
[1] https://lore.kernel.org/linuxppc-dev/5e8fbea3-8faf-0951-172a-b41a2138fbcf@gmail.com/
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-5-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the first guest visible change introduced in
spapr_numa.c. The previous settings of both reference-points
and maxdomains were too restrictive, but enough for the
existing associativity we're setting in the resources.
We'll change that in the following patches, populating the
associativity arrays based on user input. For those changes
to be effective, reference-points and maxdomains must be
more flexible. After this patch, we'll have 4 distinct
levels of NUMA (0x4, 0x3, 0x2, 0x1) and maxdomains will
allow for any type of configuration the user intends to
do - under the scope and limitations of PAPR itself, of
course.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pSeries machine does not support asymmetrical NUMA
configurations. This doesn't make much of a different
since we're not using user input for pSeries NUMA setup,
but this will change in the next patches.
To avoid breaking existing setups, gate this change by
checking for legacy NUMA support.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The changes to come to NUMA support are all guest visible. In
theory we could just create a new 5_1 class option flag to
avoid the changes to cascade to 5.1 and under. The reality is that
these changes are only relevant if the machine has more than one
NUMA node. There is no need to change guest behavior that has
been around for years needlesly.
This new helper will be used by the next patches to determine
whether we should retain the (soon to be) legacy NUMA behavior
in the pSeries machine. The new behavior will only be exposed
if:
- machine is pseries-5.2 and newer;
- more than one NUMA node is declared in NUMA state.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The cas_check_pvr() function has two purposes:
- finding the "best" logical PVR, ie. the most recent one supported by
the guest for this CPU type
- checking if the guest supports the real PVR of this CPU type, which
is just an optional extra information to workaround the lack of
support for "compat" mode in PR KVM
This logic doesn't need error reporting, really. If we don't find a
suitable logical PVR, we return the special value 0 which is definitely
not a valid PVR. Let the caller decide on whether it should error out
or not.
This doesn't change the behavior.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-6-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", indicate success / failure with a
return value. Since ppc_set_compat() is called from a VMState handler,
let's make it an int so that it propagates any negative errno returned
by kvmppc_set_compat(). Do the same for ppc_set_compat_all() for
consistency, even if it isn't called in a context where a negative errno
is required on failure.
This will allow to simplify error handling in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-3-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The nested KVM code does not yet support HPT guests. Calling the
KVM_CAP_PPC_ALLOC_HTAB ioctl currently leads to KVM setting the guest
as HPT and erroneously executing code in L1 that should only run in
hypervisor mode, leading to an exception in the L1 vcpu thread when it
enters the nested guest.
This can be reproduced with -machine max-cpu-compat=power8 in the L2
guest command line.
The KVM code has since been modified to fail the ioctl when running in
a nested environment so QEMU needs to be able to handle that. This
patch provides an error message informing the user about the lack of
support for HPT in nested guests.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20200911043123.204162-1-farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU supports a 48-bit physical address range, but we don't currently
expose it in the '-cpu max' ID registers (you get the same range as
Cortex-A57, which is 44 bits).
Set the ID_AA64MMFR0.PARange field to indicate 48 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201001160116.18095-1-peter.maydell@linaro.org
Move the KVM PMU setup part of fdt_add_pmu_nodes() to
virt_cpu_post_init(), which is a more appropriate location. Now
fdt_add_pmu_nodes() is also named more appropriately, because it
no longer does anything but fdt node creation.
No functional change intended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we compile without KVM support !defined(CONFIG_KVM) we generate
stubs for functions that the linker will still encounter. Sometimes
these stubs can be executed safely and are placed in paths where they
get executed with or without KVM. Other functions should never be
called without KVM. Those functions should be guarded by kvm_enabled(),
but should also be robust to refactoring mistakes. Putting a
g_assert_not_reached() in the function should help. Additionally,
the g_assert_not_reached() calls may actually help the linker remove
some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't
necessary at all - the only caller is in kvm.c
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "BCM2835 ARM Peripherals" datasheet [*] chapter 2
("Auxiliaries: UART1 & SPI1, SPI2"), list the register
sizes as 3/8/16/32 bits. We assume this means this
peripheral allows 8-bit accesses.
This was not an issue until commit 5d971f9e67 which reverted
("memory: accept mismatching sizes in memory_region_access_valid").
The model is implemented as 32-bit accesses (see commit 97398d900c,
all registers are 32-bit) so replace MemoryRegionOps.valid as
MemoryRegionOps.impl, and re-introduce MemoryRegionOps.valid
with a 8/32-bit range.
[*] https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Fixes: 97398d900c ("bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201002181032.1899463-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Original commit did not allocate IRQs for the SMMUv3 in the irqmap
effectively using irq 0->3 (shared with other devices). Assuming
original intent was to allocate unique IRQs then add an allocation
to the irqmap.
Fixes: e9fdf45324 ("hw/arm: Add arm SBSA reference machine, devices part")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-3-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix integer handling issues handling issue reported by Coverity:
hw/ssi/npcm7xx_fiu.c: 162 in npcm7xx_fiu_flash_read()
>>> CID 1432730: Integer handling issues (NEGATIVE_RETURNS)
>>> "npcm7xx_fiu_cs_index(fiu, f)" is passed to a parameter that cannot be negative.
162 npcm7xx_fiu_select(fiu, npcm7xx_fiu_cs_index(fiu, f));
hw/ssi/npcm7xx_fiu.c: 221 in npcm7xx_fiu_flash_write()
218 cs_id = npcm7xx_fiu_cs_index(fiu, f);
219 trace_npcm7xx_fiu_flash_write(DEVICE(fiu)->canonical_path, cs_id, addr,
220 size, v);
>>> CID 1432729: Integer handling issues (NEGATIVE_RETURNS)
>>> "cs_id" is passed to a parameter that cannot be negative.
221 npcm7xx_fiu_select(fiu, cs_id);
Since the index of the flash can not be negative, return an
unsigned type.
Reported-by: Coverity (CID 1432729 & 1432730: NEGATIVE_RETURNS)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200919132435.310527-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cmp_vec opcode is mandatory; this symbol is unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the two arguments are identical, this can be reduced to
dup_vec or to mov_vec from a tcg_constant_vec.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The definition of INDEX_op_dupi_vec is that it operates on
units of tcg_target_ulong -- in this case 32 bits. It does
not work to use this for a uint64_t value that happens to be
small enough to fit in tcg_target_ulong.
Fixes: d2fd745fe8
Fixes: db432672dc
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The previous change wrongly stated that 32-bit avx2 should have
used VPBROADCASTW. But that's a 16-bit broadcast and we want a
32-bit broadcast.
Fixes: 7b60ef3264
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are easier to set and test when they have their own fields.
Reduce the size of alias_index and sort_index to 4 bits, which is
sufficient for TCG_MAX_OP_ARGS. This leaves only the bits indicating
constants within the ct field.
Move all initialization to allocation time, rather than init
individual fields in process_op_defs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used for anything, really. All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Kevin Wolf