We sometime get kernel panic with some devices on Aarch64
hosts. Alex Williamson suggests it might be broken PCIe
root complex. Add trace event to record the latest I/O
access before crashing. In case, assert our accesses are
aligned.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Change the confuse "VFIO IOMMU check failed" error message by
the explicit "VFIO IOMMU Type1 is not supported" once.
Example on POWER:
$ qemu-system-ppc64 -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw
qemu-system-ppc64: -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw: VFIO IOMMU Type1 is not supported
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
From the specification chapter 3.1.8 "AQA - Admin Queue Attributes"
the Admin Submission Queue Size field is a 0’s based value:
Admin Submission Queue Size (ASQS):
Defines the size of the Admin Submission Queue in entries.
Enabling a controller while this field is cleared to 00h
produces undefined results. The minimum size of the Admin
Submission Queue is two entries. The maximum size of the
Admin Submission Queue is 4096 entries.
This is a 0’s based value.
This bug has never been hit because the device initialization
uses a single command synchronously :)
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-15-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Just for consistency, following the example documented since
commit e3fe3988d7 ("error: Document Error API usage rules"),
return a boolean value indicating an error is set or not.
Directly pass errp as the local_err is not requested in our
case. This simplifies a bit nvme_create_queue_pair().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201029093306.1063879-12-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
The "block/nvme.h" header is shared by both the NVMe block
driver and the NVMe emulated device. Add the 'F:' entry on
both sections, so all maintainers/reviewers are notified
when it is changed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20200701140634.25994-1-philmd@redhat.com>
qemu_semihosting_console_init uses semihosting.chardev which is set
by qemu_semihosting_connect_chardevs. Thus qemu_semihosting_connect_chardevs
has to be called first.
Both have to be called after processing -serial and friends though, so
that the semihosting console can connect to a multiplexer as in
"-serial mon:stdio -semihosting-config chardev=serial0"
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: 619985e937 ("semihosting: defer connect_chardevs a little more to use serialx", 2020-07-27)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should be checking that the device is trying to read from RAM, before
filling the region with data. Otherwise, we will try to populate
nonsensical addresses in RAM for callbacks on PIO/MMIO reads. We did
this originally, however the final version I sent had the line commented
out..
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code had all sorts of issues. We used a loop similar to
address_space_write_rom, but I did not remove a "break" that only made
sense in the context of the switch statement in the original code. Then,
after the loop, we did a separate qtest_memwrite over the entire DMA
access range, defeating the purpose of the loop. Additionally, we
increment the buf pointer, and then try to g_free() it. Fix these
problems.
Reported-by: OSS-Fuzz (Issue 26725)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: OSS-Fuzz (Issue 26691)
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This series adds support for migration to RISC-V QEMU and expands the
Microchip PFSoC to allow unmodified HSS and Linux boots.
# gpg: Signature made Tue 03 Nov 2020 15:19:45 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20201103:
target/riscv/csr.c : add space before the open parenthesis '('
hw/riscv: microchip_pfsoc: Hook the I2C1 controller
hw/riscv: microchip_pfsoc: Correct DDR memory map
hw/riscv: microchip_pfsoc: Map the reserved memory at address 0
hw/riscv: microchip_pfsoc: Connect the SYSREG module
hw/misc: Add Microchip PolarFire SoC SYSREG module support
hw/riscv: microchip_pfsoc: Connect the IOSCB module
hw/misc: Add Microchip PolarFire SoC IOSCB module support
hw/riscv: microchip_pfsoc: Connect DDR memory controller modules
hw/misc: Add Microchip PolarFire SoC DDR Memory Controller support
hw/riscv: microchip_pfsoc: Document where to look at the SoC memory maps
target/riscv: Add sifive_plic vmstate
target/riscv: Add V extension state description
target/riscv: Add H extension state description
target/riscv: Add PMP state description
target/riscv: Add basic vmstate description of CPU
target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit
hw/riscv: virt: Allow passing custom DTB
hw/riscv: sifive_u: Allow passing custom DTB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MIPSR6 (not only MIPS32R6) processors support unaligned access in
hardware, so set MO_UNALN in their default_tcg_memop_mask. Btw, new
Loongson-3 (such as Loongson-3A4000) also support unaligned access,
since both old and new Loongson-3 use the same binaries, we can simply
set MO_UNALN for all Loongson-3 processors.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1604053541-27822-3-git-send-email-chenhc@lemote.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201023122633.19466-1-chetan4windows@gmail.com>
[PMD: Added hw/mips/ prefix in subject]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
In addition, fix two error format problems found by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
+ fprintf(stderr,"%s attributes=0x%02x begin=%u size=%d\n",
^
ERROR: line over 90 characters
+ fprintf(stderr, "%d, %s (%u, %d)\n", i, commit->path ? commit->path : "(null)", commit->param.rename.cluster, commit->action);
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA12620.6030705@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
pylint complains about the use of super with the current class and
instance as arguments in VM.__init__():
iotests.py:546:8: R1725: Consider using Python 3 style super() without arguments (super-with-arguments)
No reason not to follow the advice and make it happy, so let's do this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-4-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When run with Python 3.9, pylint incorrectly warns about things like
Optional[foo] because it doesn't recognise Optional as unsubscriptable.
This is a known pylint bug:
https://github.com/PyCQA/pylint/issues/3882
Just disable this check to get rid of the warnings.
Disabling this shouldn't make us miss any real bug because mypy also
has a similar check ("... is not indexable").
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-3-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 1847a4a8c2 clarified that event_wait() can return None (though
only with timeout=0) and commit f12a282ff4 annotated it as returning
Optional[QMPMessage].
Type checks in wait_migration() fail because of the unexpected optional
return type:
iotests.py:750: error: Value of type variable "Msg" of "log" cannot be "Optional[Dict[str, Any]]"
iotests.py:751: error: Value of type "Optional[Dict[str, Any]]" is not indexable
iotests.py:754: error: Value of type "Optional[Dict[str, Any]]" is not indexable
Fortunately, the non-zero default timeout is used in the event_wait()
call, so we can make mypy happy by just asserting this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-2-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" modified
aio_poll() in util/aio-posix.c to avoid an assertion failure. This
change is missing in util/aio-win32.c.
Apply the changes to util/aio-posix.c to util/aio-win32.c too.
This fixes an assertion failure on Windows whenever QEMU exits.
$ ./qemu-system-x86_64.exe -machine pc,accel=tcg -display gtk
**
ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion failed:
(in_aio_context_home_thread(ctx))
Bail out! ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion
failed: (in_aio_context_home_thread(ctx))
Fixes: 9ce44e2ce2 ("qmp: Move dispatcher to a coroutine")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201021064033.8600-1-vr_qemu@t-online.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The latest SD card image [1] released by Microchip ships a Linux
kernel with built-in PolarFire SoC I2C driver support. The device
tree file includes the description for the I2C1 node hence kernel
tries to probe the I2C1 device during boot.
It is enough to create an unimplemented device for I2C1 to allow
the kernel to continue booting to the shell.
[1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Philippe Mathieu-Daudé