This property has been deprecated since QEMU 5.0 by commit 22062e54bb.
We only kept a legacy hack that internally converts "compat" into the
official "max-cpu-compat" property of the pseries machine type.
According to our deprecation policy, we could have removed it for QEMU 5.2
already. Do it now ; since ppc_cpu_parse_featurestr() now just calls the
generic parent_parse_features handler, drop it as well.
Users are supposed to use the "max-cpu-compat" property of the pseries
machine type instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201131103.897430-1-groug@kaod.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All users are passing &error_abort already. Document the fact
that spapr_drc_attach() should only be passed a free DRC, which
is supposedly the case if appropriate checking is done earlier.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_pre_plug() already guarantees that the slot for the given core
ID is available. It is thus safe to assume that spapr_find_cpu_slot()
returns a slot during plug. Turn the error path into an assertion.
It is also safe to assume that no device is attached to the corresponding
DRC and that spapr_drc_attach() shouldn't fail.
Pass &error_abort to spapr_drc_attach() and simplify error handling.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-4-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is hot-plugged, we set its compat mode to match the boot
CPU, which was either set by machine reset or by CAS. This is currently
handled in the plug handler after the core got realized. Potential errors
of ppc_set_compat() are propagated to the hot-plug logic.
Handling errors this late in the hot-plug sequence is generally frown
upon. Ideally, we should do sanity checks in a pre-plug handler and pass
&error_abort to ppc_set_compat() in the plug handler.
We can filter out some error cases of ppc_set_compat() by calling
ppc_check_compat() at pre-plug. But ppc_set_compat() also sets the
compat register in KVM, and KVM doesn't provide any API that would
allow to check valid compat mode settings beforehand.
However, at this point we know that the compat mode was already
successfully set for the boot CPU. Since this all boils down to
setting a register with the very same value that was valid
for the boot CPU, it should definitely not fail for hot-plugged
CPUS.
Pass &error_abort to ppc_set_compat().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This hack registers dummy VMState entries of ICPs in order to
support migration of old pseries machine types that used to
create all smp.max_cpus possible ICPs at machine init.
Part of the work is to unregister the dummy entries when plugging
an actual vCPU core, and to register them back when unplugging the
core. The code that unregisters the dummy ICPs in spapr_core_plug()
is misplaced: if ppc_set_compat() fails afterwards, the hotplug
operation will be cancelled and the dummy ICPs won't be registered
back since the unplug handler isn't called.
Unregister the dummy ICPs at the end of spapr_core_plug().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
I have been keeping those logging messages in an ugly form for
while. Make them clean !
Beware not to activate all of them, this is really verbose.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201123163717.1368450-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to the PowerISA v3.1 reference, Table 68 "Actions for xscmpudp
- Part 1: Compare Unordered", whenever one of the two operands is a NaN
the SO bit is set while the other three bits are cleared.
Apply the same change to xscmpuqp.
The respective ordered counterparts are unaffected.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <20201112230130.65262-2-thatlemon@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
hw/ppc/ppc.c: In function ‘ppc6xx_set_irq’:
hw/ppc/ppc.c:118:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
118 | if (level) {
| ^
hw/ppc/ppc.c:123:9: note: here
123 | case PPC6xx_INPUT_INT:
| ^~~~
According to the discussion, a break statement needs to be added here.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20201116024810.2415819-7-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
target/ppc/mmu_helper.c: In function ‘dump_mmu’:
target/ppc/mmu_helper.c:1351:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
1351 | if (ppc64_v3_radix(env_archcpu(env))) {
| ^
target/ppc/mmu_helper.c:1358:5: note: here
1358 | default:
| ^~~~~~~
Use "qemu_log_mask(LOG_UNIMP**)" instead of the TODO comment.
And add the break statement to fix it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20201116024810.2415819-8-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There can be only one TPM proxy at a time. This is currently
checked at plug time. But this can be detected at pre-plug in
order to error out earlier.
This allows to get rid of error handling in the plug handler.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-9-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We currently detect that a PHB index is already in use at plug time.
But this can be decteted at pre-plug in order to error out earlier.
This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-8-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Pre-plug of a memory device, be it an NVDIMM or a PC-DIMM, ensures
that the memory slot is available and that addresses don't overlap
with existing memory regions. The corresponding DRCs in the LMB
and PMEM namespaces are thus necessarily attachable at plug time.
Pass &error_abort to spapr_drc_attach() in spapr_add_lmbs() and
spapr_add_nvdimm(). This allows to greatly simplify error handling
on the plug path.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PHB acts as the hotplug handler for PCI devices. It does some
sanity checks on DR enablement, PCI bridge chassis numbers and
multifunction. These checks are currently performed at plug time,
but they would best sit in a pre-plug handler in order to error
out as early as possible.
Create a spapr_pci_pre_plug() handler and move all the checking
there. Add a check that the associated DRC doesn't already have
an attached device. This is equivalent to the slot availability
check performed by do_pci_register_device() upon realization of
the PCI device.
This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR XIVE device is created by the machine in spapr_irq_init().
The latter overrides any value provided by the user with -global for
the "nr-irqs" and "nr-ends" properties with strictly positive values.
It seems reasonable to assume these properties should never be 0,
which wouldn't make much sense by the way.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120174646.619395-2-groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This check can be done in a much shorter way in meson.build. And while
we're at it, rename the #define to HAVE_SYS_KCOV_H to match the other
HAVE_someheader_H symbols that we already have.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-6-thuth@redhat.com>
[lv: s/signal/kcov/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Address translation is an architectural thing (not hardware
related). Move the helpers from hw/ to target/.
As physical address and KVM are specific to system mode
emulation, restrict this file to softmmu, so it doesn't
get compiled for user-mode emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-2-f4bug@amsat.org>
Introduce cpu_supports_isa() which takes a CPUMIPSState
argument, more useful at runtime when the CPU is created
(no need to call the extensive object_class_by_name()).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207215257.4004222-3-f4bug@amsat.org>
Greg Kurz