Add -cpu a64fx to use A64FX processor when -machine virt option is
specified. In addition, add a64fx to the Supported guest CPU types
in the virt.rst document.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a definition for the Fujitsu A64FX processor.
The A64FX processor does not implement the AArch32 Execution state,
so there are no associated AArch32 Identification registers.
For SVE, the A64FX processor supports only 128,256 and 512bit vector
lengths.
The Identification register values are defined based on the FX700,
and have been tested and confirmed.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We now have a complete MVE emulation, so we can enable it in our
Cortex-M55 model by setting the ID registers to match those of a
Cortex-M55 with full MVE support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VRINT insns, which round floating point inputs
to integer values, leaving them in floating point format.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT instruction which converts between single
and half precision floating point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT which converts from floating-point to integer
using a rounding mode specified by the instruction. We implement
this similarly to the Neon equivalents, by passing the required
rounding mode as an extra integer parameter to the helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VCVT insns which convert between floating and fixed
point. As with the Neon equivalents, these use essentially the same
constant encoding as right-shift-by-immediate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMV, VMINNMV, VMAXNMAV, VMINNMAV insns. These
calculate the maximum or minimum of floating point elements across a
vector, starting with a value in a general purpose register and
returning the result there.
The pseudocode silences a possible SNaN in the accumulating result
on every iteration (by calling FPConvertNaN), but we do it only
on the input ra, because if none of the inputs to float*_maxnum
or float*_minnum are SNaNs then the result can't be an SNaN.
Note that we can't use the float*_maxnuma() etc functions we defined
earlier for VMAXNMA and VMINNMA, because we mustn't take the absolute
value of the starting general-purpose register value, which could be
negative.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In commit a777d60334 we added an assertion to parts_silence_nan() that
prohibits calling float*_silence_nan() when in default-NaN mode.
This ties together a property of the output ("do we generate a default
NaN when the result is a NaN?") with an operation on an input ("silence
this input NaN").
It's true that most of the time when in default-NaN mode you won't
need to silence an input NaN, because you can just produce the
default NaN as the result instead. But some functions like
float*_maxnum() are defined to be able to work with quiet NaNs, so
silencing an input SNaN is still reasonable. In particular, the
upcoming implementation of MVE VMAXNMV would fall over this assertion
if we didn't delete it.
Delete the assertion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMAXNMA and VMINNMA insns; these are 2-operand, but
the destination register must be the same as one of the source
registers.
We defer the decode of the size in bit 28 to the individual insn
patterns rather than doing it in the format, because otherwise we
would have a single insn pattern that overlapped with two groups (eg
VMAXNMA with the VMULH_S and VMULH_U groups). Having two insn
patterns per insn seems clearer than a complex multilevel nesting
of overlapping and non-overlapping groups.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VCADD insn. Note that here the size bit is the
opposite sense to the other 2-operand fp insns.
We don't check for the sz == 1 && Qd == Qm UNPREDICTABLE case,
because that would mean we can't use the DO_2OP_FP macro in
translate-mve.c.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the MVE VADD (floating-point) insn. Handling of this is
similar to the 2-operand integer insns, except that we must take care
to only update the floating point exception status if the least
significant bit of the predicate mask for each element is active.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Quoting Peter Maydell:
These MEMTX_* aren't from the memory transaction API functions;
they're just being used by gicd_readl() and friends as a way to
indicate a success/failure so that the actual MemoryRegionOps
read/write fns like gicv3_dist_read() can log a guest error.
Arguably this is a bit of a misuse of the MEMTX_* constants and
perhaps we should have gicd_readl etc return a bool instead.
Follow his suggestion and replace the MEMTX_* constants by
boolean values, simplifying a bit the gicv3_dist_read() /
gicv3_dist_write() handlers.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210826180704.2131949-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU load/store API (docs/devel/loads-stores.rst) uses the 'q'
suffix for 64-bit accesses. Rename the current 'll' suffix to
have the GIC dist accessors better match the rest of the codebase.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210826180704.2131949-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First RISC-V PR for QEMU 6.2
- Add a config for Shakti UART
- Fixup virt flash node
- Don't override users supplied ISA version
- Fixup some CSR accesses
- Use g_strjoinv() for virt machine PLIC string config
- Fix an overflow in the SiFive CLINT
- Add 64-bit register access helpers
- Replace tcg_const_* with direct constant usage
# gpg: Signature made Wed 01 Sep 2021 03:08:48 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210901-2: (33 commits)
target/riscv: Use {get,dest}_gpr for RVV
target/riscv: Tidy trans_rvh.c.inc
target/riscv: Use {get,dest}_gpr for RVD
target/riscv: Use {get,dest}_gpr for RVF
target/riscv: Use gen_shift_imm_fn for slli_uw
target/riscv: Use {get,dest}_gpr for RVA
target/riscv: Reorg csr instructions
target/riscv: Fix hgeie, hgeip
target/riscv: Fix rmw_sip, rmw_vsip, rmw_hsip vs write-only operation
target/riscv: Use {get, dest}_gpr for integer load/store
target/riscv: Use get_gpr in branches
target/riscv: Use extracts for sraiw and srliw
target/riscv: Use DisasExtend in shift operations
target/riscv: Add DisasExtend to gen_unary
target/riscv: Move gen_* helpers for RVB
target/riscv: Move gen_* helpers for RVM
target/riscv: Use gen_arith for mulh and mulhu
target/riscv: Remove gen_arith_div*
target/riscv: Add DisasExtend to gen_arith*
target/riscv: Introduce DisasExtend and new helpers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The device uses the guest-supplied stream number unchecked, which can
lead to guest-triggered out-of-band access to the UASDevice->data3 and
UASDevice->status3 fields. Add the missing checks.
Fixes: CVE-2021-3713
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Chen Zhe <chenzhe@huawei.com>
Reported-by: Tan Jingguo <tanjingguo@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210818120505.1258262-2-kraxel@redhat.com>
Introduce csrr and csrw helpers, for read-only and write-only insns.
Note that we do not properly implement this in riscv_csrrw, in that
we cannot distinguish true read-only (rs1 == 0) from any other zero
write_mask another source register -- this should still raise an
exception for read-only registers.
Only issue gen_io_start for CF_USE_ICOUNT.
Use ctx->zero for csrrc.
Use get_gpr and dest_gpr.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210823195529.560295-19-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Shuuichirou Ishii