The 'status' field for the migration is updated normally using
an atomic operation from the migration thread.
Most readers of it aren't that careful, and in most cases it doesn't
matter.
In query_migrate->fill_source_migration_info the 'state'
is read twice; the first time to decide which state fields to fill in,
and then secondly to copy the state to the status field; that can end up
with a status that's inconsistent; e.g. setting up the fields
for 'setup' and then having an 'active' status. In that case
libvirt gets upset by the lack of ram info.
The symptom is:
libvirt.libvirtError: internal error: migration was active, but no RAM info was set
Read the state exactly once in fill_source_migration_info.
This is a possible fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=2074205
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220413113329.103696-1-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Previously migration didn't have an easy way to cleanup the listening
transport, migrate recovery only allows to execute once. That's done with a
trick flag in postcopy_recover_triggered.
Now the facility is already there.
Drop postcopy_recover_triggered and instead allows a new migrate-recover to
release the previous listener transport.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-8-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We used to use postcopy_try_recover() to replace migration_incoming_setup() to
setup incoming channels. That's fine for the old world, but in the new world
there can be more than one channels that need setup. Better move the channel
setup out of it so that postcopy_try_recover() only handles the last phase of
switching to the recovery phase.
To do that in migration_fd_process_incoming(), move the postcopy_try_recover()
call to be after migration_incoming_setup(), which will setup the channels.
While in migration_ioc_process_incoming(), postpone the recover() routine right
before we'll jump into migration_incoming_process().
A side benefit is we don't need to pass in QEMUFile* to postcopy_try_recover()
anymore. Remove it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-7-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This variable, along with its helpers, is used to detect whether multiple
channel will be supported for migration. In follow up patches, there'll be
other capability that requires multi-channels. Hence move it outside multifd
specific code and make it public. Meanwhile rename it from "multifd" to
"multi_channels" to show its real meaning.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-5-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This boolean flag shows whether the current page during migration is triggered
by postcopy or not. Then in ram_save_host_page() and deeper stack we'll be
able to have a reference on the priority of this page.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-4-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We used to release it right after migrate_fd_connect(). That's not good
enough when there're more than one socket pair required, because it'll be
needed to establish TLS connection for the rest channels.
One example is multifd, where we copied over the hostname for each channel
but that's actually not needed.
Keeping the hostname until the cleanup phase of migration.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220331150857.74406-2-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup checkpatch error; don't need to check for NULL
around g_free
The migration precopy testing helper function always expects the
migration to run to a completion state. There will be test scenarios
for TLS where expect either the client or server to fail the migration.
This expands the helper to cope with these scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-12-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are alot of different scenarios to test with migration due to the
wide number of parameters and capabilities available. To enable sharing
of the basic precopy test scenario, we need to be able to set arbitrary
parameters and capabilities before the migration is initiated, but don't
want to have all this logic in the common helper function. Solve this
by defining two hooks that can be provided by the test case, one before
migration starts and one after migration finishes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-10-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The migration TLS code has a check mandating that a hostname be
available when starting a TLS session. This is expected when using
x509 credentials, but is bogus for PSK and anonymous credentials
as neither involve hostname validation.
The TLS crdentials object gained suitable error reporting in the
case of TLS with x509 credentials, so there is no longer any need
for the migration code to do its own (incorrect) validation.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-7-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
QAPI patches patches for 2022-04-21
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmJhZgISHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTuZQP/iesk/r4ytyk+q+ksNCQHTZl4B4uZcbI
# TgbA1dwbwkKOfNaqByKZzXvbymL9Y4RpZavZ0i1qa3hK5orKHThLK4omRaFD+SPp
# sH53TeTgkG/UNUQk00dim1BzuWJefqFo1rYSqvTzaXVPyx1Q9Gk9193q5zDTlMJs
# w6UKD+q+Yxne9aoi1IH2NzzEKElHz7MMFeBDsnxDbkedzBxY1Ka05IOI2ucXhJ7X
# mYTZxHsrjncW4qJNkf57u9y4faNDIBeT3vkFqBaIeTXSSqm+xO1rkLanGOLQKtIM
# zD6JDMcqsIkZttEy0QCOrjKvMueWaOTZsS0sbdCC+JpBAbyVeS83kmRyYwEhyGre
# FJzf81zcEH6FtnDYudWWUT7hKV6sHWbw+4ho5WTkCYnr/Cfqr3TyDbSW+f/eIxUK
# vaujP/8MTypS4p0mx4QfM2/eO05oZHwEaslOn0gkg7siAJWuC7KUkkWSwz6ZNZCp
# qj/+jtDRGhvB4bGFusciqwtbnLNtVPX2meUuVxK74lmKa00+zXraNFfvGIxfzzC0
# pJ6weJj2jMLo5OEsZ2xWfNqhDigFQYxbGR8X3N2hg5GZTx1k5WXx7mRz3GlAwd8Q
# /4hcTBXKTFxDNxXqzL2eHBtaruKHjnHoVo2eAodyF+9FqErInjr/wisVm6I+R8NR
# Z94UBs8lvMIC
# =a3AD
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 07:11:14 AM PDT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2022-04-21' of git://repo.or.cz/qemu/armbru:
qapi: Fix version of cpu0-id field
qapi: Fix typo
qapi: Fix documentation for query-xen-replication-status
docs: qapi: Remove outdated reference to simple unions
qapi-schema: test: add a unit test for parsing array alternates
qapi-schema: test: add a qapi-schema-test for array alternates
qapi-schema: support alternates with array type
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
`cpu_pc` at this point does not necessary point to the current
instruction (i.e., the wait instruction being translated), so it's
incorrect to calculate the new value of `cpu_pc` based on this. It must
be updated with `ctx->base.pc_next`, which contains the correct address
of the next instruction.
This change fixes the wait instruction skipping the subsequent branch
when used in an idle loop like this:
0: wait
bra.b 0b
brk // should be unreachable
Signed-off-by: Tomoaki Kawada <i@yvt.jp>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417060224.2131788-1-i@yvt.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target-arm queue:
* hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF
* versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem
* versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s
* xlnx-zynqmp: Connect 4 TTC timers
* exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq
* realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
* hw/core/irq: remove unused 'qemu_irq_split' function
* npcm7xx: use symbolic constants for PWRON STRAP bit fields
* virt: document impact of gic-version on max CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJhPSUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3hAsD/4qzZK6LFL4kFH6E4z3tWIn
# ErHrfPGUt/SEfHLP+stQP/loFgkR1SNzcrIZ/HiDCB/W+IqQKuP+tHin2lMhO1tR
# KM6suUO1In2hoxfzimVta4F4GVN8ifY69qUYhaRxcBYSUpRXDNFJGsRIeT5JeUMd
# SArZUifRs7JUo25rIkg5Y+YZE37dmiA5gcuswtoLPa/UlDVqRxihLnItySmeutsc
# /Y8d/iym/ydlhvtL1OUt1KKYeg4ykrPzJCfvopsT2xgkwwB0PYci8//fa5IrRVlp
# Uw6yDssZrDIcXfVz88rdriILaszicCv8lOhTH6I74oXCatiyvi4BEzW8uGqVS8wt
# ff+AaKvGqb5t4GKKhCdpL2NzDwKBGWZHuruACs9IfvMkz62HE12Vr99qAKdQ3s93
# QnFIyUKg90mGkvKy8336zX3hnWjPH8wTASOXbNrgnt6GVLkqwy9ibug5kS+n77eJ
# BnkE5p3OfMVJ5a4o+iZbbDJKfzhNUHDSMIBbG1jRNzax1RgxOBtHFSqP5jmbpm+S
# agyr8h+Md0Tx1dwZKxdCGyvcbSZiG2WxRnci3dyT4MqYY1t1GEpOfcs1EN+CYKwG
# iuezZzJopjOFGaXQaB3OvbvCKxuroHKG61SmDmx+5OkfAxhrqe4ulwYij4jhsyhH
# t8zGzDOKLakv3li90xCX/w==
# =Rke9
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 04:16:53 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220421' of https://git.linaro.org/people/pmaydell/qemu-arm: (31 commits)
hw/arm: Use bit fields for NPCM7XX PWRON STRAPs
hw/misc: Add PWRON STRAP bit fields in GCR module
hw/arm/virt: impact of gic-version on max CPUs
hw/core/irq: remove unused 'qemu_irq_split' function
hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ'
hw/arm/exynos4210: Drop Exynos4210Irq struct
hw/arm/exynos4210: Put combiners into state struct
hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs()
hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs
hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners
hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines
hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs()
hw/arm/exynos4210: Delete unused macro definitions
hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c
hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct
hw/arm/exynos4210: Put external GIC into state struct
hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c
hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[]
hw/arm/exynos4210: Coalesce board_irqs and irq_table
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pylint upgraded recently (2.13.z) and having a pylint: disable comment
in the middle of an argument field causes it some grief (It appears to
stop parsing when it encounters it, causing some syntax problems). Since
the duplicate line threshold was bumped up in 22305c2a08, we don't
need this workaround anymore. Drop it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Now that we are fully switched over to the new QMP library, move it back
over the old namespace. This is being done primarily so that we may
upload this package simply as "qemu.qmp" without introducing confusion
over whether or not "aqmp" is a new protocol or not.
The trade-off is increased confusion inside the QEMU developer
tree. Sorry!
Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp";
not out of necessity, but just to remove any traces of the "aqmp"
name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Copy the docstrings out of qemu.qmp, adjusting them as necessary to
more accurately reflect the current state of this class.
(Licensing: This is copying and modifying GPLv2-only licensed docstrings
into a GPLv2-only file.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
After this patch, qemu.aqmp.legacy.QEMUMonitorProtocol no longer
inherits from qemu.qmp.QEMUMonitorProtocol. To do this, several
inherited methods need to be explicitly re-defined.
(Licensing: This is copying and modifying GPLv2-only code into a
GPLv2-only file.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220330172812.3427355-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The next several commits copy some code from qemu.qmp to qemu.aqmp, then
delete qemu.qmp. In the interim, to prevent test failures, the duplicate
code detection needs to be silenced to prevent bisect problems with CI
testing.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20220330172812.3427355-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
aqmp-tui, the async QMP text user interface tool, is presently licensed
as GPLv2+. I intend to include this tool as an add-on to an LGPLv2+
library package hosted on PyPI.org. I've selected LGPLv2+ to maximize
compatibility with other licenses while retaining a copyleft license.
To keep licensing matters simple, I'd like to relicense this tool as
LGPLv2+ as well in order to keep the resultant license of the hosted
release files simple -- even if library users won't "link against" this
command line tool.
Therefore, I am asking permission to loosen the license.
Niteesh is effectively the sole author of this code, with scattered
lines from myself.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Message-id: 20220325200438.2556381-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
qmp-shell is presently licensed as GPLv2 (only). I intend to include
this tool as an add-on to an LGPLv2+ library package hosted on
PyPI.org. I've selected LGPLv2+ to maximize compatibility with other
licenses while retaining a copyleft license.
To keep licensing matters simple, I'd like to relicense this tool as
LGPLv2+ as well in order to keep the resultant license of the hosted
release files simple -- even if library users won't "link against" this
command line tool.
Therefore, I am asking permission from the current authors of this
tool to loosen the license. At present, those people are:
- John Snow (me!), 411/609
- Luiz Capitulino, Author, 97/609
- Daniel Berrangé, 81/609
- Eduardo Habkost, 10/609
- Marc-André Lureau, 6/609
- Fam Zheng, 3/609
- Cleber Rosa, 1/609
(All of which appear to have been written under redhat.com addresses.)
Eduardo's fixes are largely automated from 2to3 conversion tools and may
not necessarily constitute authorship, but his signature would put to
rest any questions.
Cleber's changes concern a single import statement change. Also won't
hurt to ask.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Fam Zheng <fam@euphon.net>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Eduardo Habkost <eduardo@habkost.net>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20220325200438.2556381-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I am the sole author of all of the async QMP code (python/qemu/aqmp)
with the following exceptions:
python/qemu/aqmp/qmp_shell.py and python/qemu/aqmp/legacy.py were
written by Luiz Capitulino (et al) and are already licensed separately
as GPLv2 (only).
aqmp_tui.py was written by Niteesh Babu G S and is licensed as GPLv2+.
I wish to relicense as LGPLv2+ in order to provide as much flexibility
as I reasonably can, while retaining a copyleft license. It is my belief
that LGPLv2+ is a suitable license for the Python ecosystem that aligns
with the goals and philosophy of the QEMU project.
The intent is to eventually drop legacy.py, leaving only library code
that is LGPLv2+.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220325200438.2556381-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The legacy.py module is heavily based on the QMP module by Luiz
Capitulino (et al) which is licensed as explicit GPLv2-only. The async
QMP package is currently licensed similarly, but I intend to relicense
the async package to the more flexible LGPLv2+.
In preparation for that change, make the license on legacy.py explicit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220325200438.2556381-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We don't have to maintain compatibility with both QMP libraries anymore,
so we can just remove the old exception. While we're here, take
advantage of the extra fields present in the VMLaunchFailure exception
that machine.py now raises.
(Note: I'm leaving the logging suppression here unchanged. I had
suggested previously we use filters to scrub the PID out of the logging
information so it could just be diffed as part of the iotest output, but
that meant *always* scrubbing PID from logger output, which defeated the
point of even offering that information in the output to begin with.
Ultimately, I decided it's fine to just suppress the logger temporarily.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The old code is kind of wrong. Say it's 1649309843.000001 seconds past
the epoch. Prints "1649309843.1". 9us later, it prints "1649309843.10".
Should really use %06lu for the microseconds part.
Use GDateTime instead, as suggested by Daniel.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the introduction of guest-exec in/out/err redirections in commit
a1853dca74 ("qga: guest-exec simple stdin/stdout/stderr redirection"),
some execution state variables are handled with atomic ops. However,
there are no threads involved in this code (and glib sources are
dispatched in the same thread), and no other obvious reason to use them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-40-marcandre.lureau@redhat.com>
Richard Henderson