Even if the VM is already stopped, we cannot assume that all data has
already been successfully flushed to disk. The flush during the previous
vm_stop() could have failed.
Run bdrv_flush_all() unconditionally so that we get an error each time
if the block device isn't really flushed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch adds a efficient encoding for zero blocks by
adding a new flag indicating a block is completely zero.
additionally bdrv_write_zeros() is used at the destination
to efficiently write these zeroes. depending on the implementation
this avoids that the destination target gets fully provisioned.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
s->qcow and s->qcow_filename are allocated but not freed on error. Fix the
possible leaks, remove unnecessary check for bdrv_new(), propagate ret code of
bdrv_create() and also the one of enable_write_target().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BH will be used outside big lock, so introduce lock to protect
between the writers, ie, bh's adders and deleter. The lock only
affects the writers and bh's callback does not take this extra lock.
Note that for the same AioContext, aio_bh_poll() can not run in
parallel yet.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Load the virtio.c state into vring.c when we start dataplane mode and
vice versa when stopping dataplane mode. This patch makes it possible
to start and stop dataplane any time while the guest is running.
This will eventually allow us to go back to QEMU main loop for
bdrv_drain_all() and live migration. In the meantime, this patch makes
the dataplane lifecycle more robust but should make no visible
difference. It may be useful in the virtio-net dataplane effort.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use pkg-config to determine the version and library dependency
for GlusterFS block driver.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The initial version did just PC. I didn't bother to separate out
generic parts, because I don't like to abstract from a single case.
Now we have two cases, PC and PowerMac, and I'm about to add more.
Time to do it right.
To ease review, this commit changes the code in-place, and the next
commit reorders it for better readability.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372254743-15808-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
libqtest's qtest_init() connecting to the qtest socket triggers reset.
This was coded in the hope we could use the same QEMU process for
multiple tests that way. Never used. Injects an extra reset even
when it's not used, and that can mess up tests such as the one of
-boot once I'm about to add. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372254743-15808-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When monitor_flush() is invoked repeatedly outside the monitor_unblocked()
callback, for example from tlb_info() -> ... -> print_pte(), several
watches may be added for the same event.
This is no problem per se because the extra monitor_unblocked() callbacks
are harmless if mon->outbuf is empty, the watches will be removed
gradually. However a big number of watches can grow "gpollfds" without
limit in glib_pollfds_fill(), triggering a -1/EINVAL condition in
g_poll().
Keep at most one such watch, by following the pattern observable in eg.
commits c874ea97 and c3d6b96e. The change has no effect when
monitor_unblocked() calls monitor_flush() (when the watch can either be
removed or renewed 1-for-1), but non-callback contexts won't create an
additional watch when the monitor already has one.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=970047
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1373998781-29561-3-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The g_io_channel_write_chars() documentation states,
bytes_written: The number of bytes written. This can be nonzero even if
the return value is not G_IO_STATUS_NORMAL. [...]
io_channel_send() could lose such bytes before.
Furthermore, the (status == G_IO_STATUS_EOF) condition used to evaluate to
constant false whenever it was reached. When that condition actually held,
it always led to -1 / EINVAL. This patch (almost) distinguishes
G_IO_STATUS_EOF only when no bytes have been written, and then treats it
as an error.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1373998781-29561-2-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Basing the alarm off the rtc_clock was silly. It leads to horrible
spinning in the guest after being suspended and resumed, as it tries
to catch up with lost ticks.
This requires adding an accessor for reading the vm_clock too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
vfio: enhanced VGA quirks + AER error containment
# gpg: Signature made Wed 17 Jul 2013 05:39:38 PM CDT using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
# By Alex Williamson (1) and Vijay Mohan Pandarathil (1)
# Via Alex Williamson
* awilliam/tags/vfio-for-qemu-1.6:
vfio: QEMU-AER: Qemu changes to support AER for VFIO-PCI devices
vfio-pci: VGA quirk update
Message-id: 20130717224939.4763.87264.stgit@bling.home
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Peter Lieven (4) and Ronnie Sahlberg (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
iscsi: factor out sector conversions
iscsi: assert that sectors are aligned to LUN blocksize
iscsi: remove support for misaligned nb_sectors in aio_readv
iscsi: fix -ENOSPC in iscsi_create()
Fix iSCSI crash on SG_IO with an iovector
Message-id: 1374073524-8469-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pc: don't access fw cfg if NULL
virtio-net: add feature bit for any header s/g
net: add support of mac-programming over macvtap in QEMU side
pci: fix BRDIGE typo
pci-bridge: update mappings for migration/restore
Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
access_size_min can be 1 because erroneous accesses must not crash
QEMU, they should trigger exceptions in the guest or just return
garbage (depending on the CPU). I am not sure I understand the
comment: placing a 4-byte field at the last byte of a region
makes no sense (unless impl.unaligned is true), and that is
why memory.c:access_with_adjusted_size does not bother with
minimums larger than the remaining length.
access_size_max can be mr->ops->valid.max_access_size because memory.c
can and will still break accesses bigger than
mr->ops->impl.max_access_size.
Reported-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This restore the behavior prior to b018ddf633 which accidentally changed
the return code to 0. Specifically guests probing for register existence
were affected by this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Brown paper bag for me. Originally commit 803c0816 came before commit
2c9b15c. When the order was inverted, I left in the NULL initialization
of mr->owner.
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e3127ae0 introduced a problem where we're passing a
hwaddr* to qemu_ram_ptr_length() but it wants a ram_addr_t*;
this will cause problems on 32 bit hosts and in any case
provokes a clang warning on MacOSX:
CC arm-softmmu/exec.o
exec.c:2164:46: warning: incompatible pointer types passing 'hwaddr *'
(aka 'unsigned long long *') to parameter of type 'ram_addr_t *'
(aka 'unsigned long *')
[-Wincompatible-pointer-types]
return qemu_ram_ptr_length(raddr + base, plen);
^~~~
exec.c:1392:63: note: passing argument to parameter 'size' here
static void *qemu_ram_ptr_length(ram_addr_t addr, ram_addr_t *size)
^
Since this function is only used in one place, change its
prototype to pass a hwaddr* rather than a ram_addr_t*,
rather than contorting the calling code to get the type right.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Riku Voipio <riku.voipio@linaro.org>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They're all wrong since (at least) Paolo's big source tree
reorganization. Need to shuffle some event declarations around to
keep them under the correct source file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Dropped event Unused since
mirror_cow 884fea4
paio_complete 47e6b25
paio_cancel 47e6b25
usb_ehci_data 0ce668b
megasas_qf_dequeue never used
megasas_handle_frame never used
megasas_io_continue never used
megasas_iovec_map_failed never used
megasas_dcmd_map_failed never used
milkymist_softusb_mouse_event 4c15ba9
xen_map_block 6506e4f
xen_unmap_block 6506e4f
qemu_spice_start 67be672
qemu_spice_stop 67be672
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Broken in milkymist-minimac.c from the start (commit 0742454),
faithfully moved to milkymist-minimac2.c (commit 57aa265).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Simple script to drop unused events and fix up source file comments.
The next few commits put it to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 9f328977 changes qmp_send_key() to accept key codes in hex,
but the document wasn't updated. The items of keys list is union
now, not enum.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
if the blocksize of an iSCSI LUN is bigger than the BDRV_SECTOR_SIZE
it is possible that sector_num or nb_sectors are not correctly
aligned.
to avoid corruption we fail requests which are misaligned.
Signed-off-by: Peter Lieven <pl@kamp.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this hask is not working (anymore). support for misaligned offsets should
be handled at the block layer.
Signed-off-by: Peter Lieven <pl@kamp.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't assume that SG_IO is always invoked with a simple buffer,
check the iovec_count and if it is >= 1 then we need to pass an array
of iovectors to libiscsi instead of just a plain buffer.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In qmp-marshal.c the dealloc visitor calls use the same errp
pointer of the input visitor calls. This means that if any of
the input visitor calls fails, then the dealloc visitor will
return early, before freeing the object's memory.
Here's an example, consider this code:
int qmp_marshal_input_block_passwd(Monitor *mon, const QDict *qdict, QObject **ret)
{
[...]
char * device = NULL;
char * password = NULL;
mi = qmp_input_visitor_new_strict(QOBJECT(args));
v = qmp_input_get_visitor(mi);
visit_type_str(v, &device, "device", errp);
visit_type_str(v, &password, "password", errp);
qmp_input_visitor_cleanup(mi);
if (error_is_set(errp)) {
goto out;
}
qmp_block_passwd(device, password, errp);
out:
md = qapi_dealloc_visitor_new();
v = qapi_dealloc_get_visitor(md);
visit_type_str(v, &device, "device", errp);
visit_type_str(v, &password, "password", errp);
qapi_dealloc_visitor_cleanup(md);
[...]
return 0;
}
Consider errp != NULL when the out label is reached, we're going
to leak device and password.
This patch fixes this by always passing errp=NULL for dealloc
visitors, meaning that we always try to free them regardless of
any previous failure. The above example would then be:
out:
md = qapi_dealloc_visitor_new();
v = qapi_dealloc_get_visitor(md);
visit_type_str(v, &device, "device", NULL);
visit_type_str(v, &password, "password", NULL);
qapi_dealloc_visitor_cleanup(md);
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Lieven