Existing code missed to set a parent for the quiesce and hotplug event.
While this didn't matter in practise, new introspection APIs basically now
do an object_unref(object_new(T)), which loops forever.
When trying to remove the event facility bus, the code tries to
unparent all childs on the bus, so they are properly deleted and therefore removed.
As object_unparent() on these child devices doesn't work, as there is no parent,
we loop forever.
Let's fix this by adding the event facility as a parent. Also switch from
object_initialize to object_new, so the only valid reference is in fact the
parent property. This makes it more obvious when the device (state) is actually
gone (and how the reference counting works).
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some gcc versions (e.g. Fedora 22 gcc 5.1.1) seem to use floating
point registers for spilling and filling of general purpose registers.
As the BIOS does not activate the AFP register setting of CR0 this can
cause data exception program checks.
Disallow floating point in the BIOS as a simple solution.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-2-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
# gpg: Signature made Thu 01 Oct 2015 20:02:33 BST using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
* remotes/cody/tags/block-pull-request:
block: mirror - fix full sync mode when target does not support zero init
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set the Microblaze CPU PC in the reset instead of setting it
in the realize. This is required as the PC is zeroed in the
reset function and causes problems in some situations.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
During mirror, if the target device does not support zero init, a
mirror may result in a corrupted image for sync="full" mode.
This is due to how the initial dirty bitmap is set up prior to copying
data - we did not mark sectors as dirty that are unallocated. This
means those unallocated sectors are skipped over on the target, and for
a device without zero init, invalid data may reside in those holes.
If both of the following conditions are true, then we will explicitly
mark all sectors as dirty:
1.) sync = "full"
2.) bdrv_has_zero_init(target) == false
If the target does support zero init, but a target image is passed in
with data already present (i.e. an "existing" image), it is assumed the
data present in the existing image is valid data for those sectors.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 91ed4bc5bda7e2b09eb508b07c83f4071fe0b3c9.1443705220.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
And do not issue an error_report in that case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc_compat_2_4() doesn't exist, and we shouldn't create one. Add a
comment explaining why the function doesn't exist and why pc_compat_*()
functions are deprecated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This inserts a read and write protected page between RAM and QEMU
memory, for file-backend RAM.
This makes it harder to exploit QEMU bugs resulting from buffer
overflows in devices using variants of cpu_physical_memory_map,
dma_memory_map etc.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
This inserts a read and write protected page between RAM and QEMU
memory. This makes it harder to exploit QEMU bugs resulting from buffer
overflows in devices using variants of cpu_physical_memory_map,
dma_memory_map etc.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment we first allocate RAM, sometimes more than necessary for
alignment reasons. We then free the extra RAM.
Rework this to avoid the temporary allocation: reserve the
range by mapping it with PROT_NONE, then use just the
necessary range with MAP_FIXED.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
When packet is truncated during receiving, we drop the packets but
neither discard the descriptor nor add and signal used
descriptor. This will lead several issues:
- sg mappings are leaked
- rx will be stalled if a lots of packets were truncated
In order to be consistent with vhost, fix by discarding the descriptor
in this case.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtqueue_discard() to discard a descriptor and
unmap the sgs. This will be used by the patch that will discard
descriptor when packet is truncated.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
migration/next for 20150930
# gpg: Signature made Wed 30 Sep 2015 09:24:02 BST using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20150930:
migration: Disambiguate MAX_THROTTLE
qmp/hmp: Add throttle ratio to query-migrate and info migrate
migration: Dynamic cpu throttling for auto-converge
migration: Parameters for auto-converge cpu throttling
cpu: Provide vcpu throttling interface
migration: yet more possible state transitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All error conditions that target_mprotect checks are also checked
by target_mmap. EACCESS cannot happen because we are just removing
PROT_WRITE. ENOMEM should not happen because we are modifying a
whole VMA (and we have bigger problems anyway if it happens).
Fixes a Coverity false positive, where Coverity complains about
target_mprotect's return value being passed to tb_invalidate_phys_range.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
qemu has already considered about some targets may have no traditional
signals. And openrisc's setup_frame() is dummy, but it can be supported
by setup_rt_frame().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Migration has a define for MAX_THROTTLE. Update comment to clarify that this is
used for throttling transfer speed. Hopefully this will prevent it from being
confused with a guest cpu throttling entity.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Remove traditional auto-converge static 30ms throttling code and replace it
with a dynamic throttling algorithm.
Additionally, be more aggressive when deciding when to start throttling.
Previously we waited until four unproductive memory passes. Now we begin
throttling after only two unproductive memory passes. Four seemed quite
arbitrary and only waiting for two passes allows us to complete the migration
faster.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Add migration parameters to allow the user to adjust the parameters
that control cpu throttling when auto-converge is in effect. The added
parameters are as follows:
x-cpu-throttle-initial : Initial percantage of time guest cpus are throttled
when migration auto-converge is activated.
x-cpu-throttle-increment: throttle percantage increase each time
auto-converge detects that migration is not making progress.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Provide a method to throttle guest cpu execution. CPUState is augmented with
timeout controls and throttle start/stop functions. To throttle the guest cpu
the caller simply has to call the throttle set function and provide a percentage
of throttle time.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
On destination, we move from INMIGRATE to FINISH_MIGRATE. Add that to
the list of allowed states.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Migration queue
# gpg: Signature made Tue 29 Sep 2015 07:13:55 BST using RSA key ID 854083B6
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/for-juan-201509:
ram_find_and_save_block: Split out the finding
Move dirty page search state into separate structure
migration: Use g_new() & friends where that makes obvious sense
migration: qemu-file more size_t'ifying
migration: size_t'ify some of qemu-file
Init page sizes in qtest
Split out end of migration code from migration_thread
migration/ram.c: Use RAMBlock rather than MemoryRegion
vmstate: Remove redefinition of VMSTATE_UINT32_ARRAY
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442231491-23352-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This is a start on using size_t more in qemu-file and friends;
it fixes up QEMUFilePutBufferFunc and QEMUFileGetBufferFunc
to take size_t lengths and return ssize_t return values (like read(2))
and fixes up all the different implementations of them.
Note that I've not yet followed this deeply into bdrv_ implementations.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-5-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This patch allows to run example given by open_by_handle_at(2):
The following shell session demonstrates the use of these two programs:
$ echo 'Can you please think about it?' > cecilia.txt
$ ./t_name_to_handle_at cecilia.txt > fh
$ ./t_open_by_handle_at < fh
open_by_handle_at: Operation not permitted
$ sudo ./t_open_by_handle_at < fh # Need CAP_SYS_ADMIN
Read 31 bytes
$ rm cecilia.txt
Now we delete and (quickly) re-create the file so that it has the same
content and (by chance) the same inode.[...]
$ stat --printf="%i\n" cecilia.txt # Display inode number
4072121
$ rm cecilia.txt
$ echo 'Can you please think about it?' > cecilia.txt
$ stat --printf="%i\n" cecilia.txt # Check inode number
4072121
$ sudo ./t_open_by_handle_at < fh
open_by_handle_at: Stale NFS file handle
See the man page for source code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently, __target_cmsg_nxthdr compares a pointer derived from
target_cmsg against the msg_control field of target_msgh (through
subtraction). This failed for me when emulating i386 code under x86_64,
because pointers in the host address space and pointers in the guest
address space were not the same. This patch passes the initial value of
target_cmsg into __target_cmsg_nxthdr.
I found and fixed two more related bugs:
- __target_cmsg_nxthdr now returns the new cmsg pointer instead of the
old one.
- tgt_space (in host_to_target_cmsg) doesn't count "sizeof (struct
target_cmsghdr)" twice anymore.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of creating a temporary copy for the whole environment and
the arguments, directly copy everything to the target stack.
For this to work, we have to change the order of stack creation and
copying the arguments.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The system mode binaries provide a similar alias
and it makes common options like --version and --help
work as expected.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As suggested by Laurent, use EXIT_SUCCESS and EXIT_FAILURE from
stdlib.h instead of numeric values.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds better support for diagnosing option
parser errors. The previous implementation just printed
the usage text and exited when a bad option or argument
was found. This made it very difficult to determine why
the usage was being displayed and it was doubly confusing
for cases like '--help' (it wasn't clear that --help was
actually an error).
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This option is already available on the system mode
binaries. It would be better if long options were
supported (i.e. --help), but this is okay for now.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
cocoa queue:
* fix stuck-key bug if keys were down when QEMU lost focus
* prompt the user whether they really meant to quit
* remove the 'open image file' dialog box we used to display
if the user started QEMU without arguments
# gpg: Signature made Fri 25 Sep 2015 23:17:19 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-cocoa-20150925-1:
ui/cocoa.m: remove open dialog code
ui/cocoa.m: prevent stuck key situation
ui/cocoa.m: verify with user before quitting QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Removes the open dialog code that runs when no arguments are supplied with QEMU.
Not everyone needs a hard drive or cdrom to boot their target. A user might only
need to use their target's bios to do work. With that said, this patch removes
the unneeded open dialog code.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 33856864-321C-4367-9170-FB0BF81E789B@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the user puts QEMU in the background while holding
down a key, QEMU will not receive the keyup event when
the user lets go of the key. When the user goes back to
QEMU, QEMU will think the key is still down causing
stuck key symptoms. This patch fixes this problem by
releasing all down keys when QEMU goes into the
background.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 7A3FA6EE-84C8-4422-A786-C899B7229D32@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch prevents the user from accidentally quitting QEMU by pushing
Command-Q or by pushing the close button on the main window. When
the user does one of these two things, a dialog box appears verifying
with the user if he or she wants to quit QEMU.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 29169A74-0347-47F5-934F-A5AD24C225CA@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Christian Borntraeger