It looks like the ARM ARM has simplified the pseudo code for the
calculation which is done on a fixed point 9 bit integer maths. So
while adding f16 we can also clean this up to be a little less heavy
on the floating point and just return the fractional part and leave
the calle's to do the final packing of the result.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-23-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This actually covers two different sections of the encoding table:
Advanced SIMD scalar two-register miscellaneous FP16
Advanced SIMD two-register miscellaneous (FP16)
The difference between the two is covered by a combination of Q (bit
30) and S (bit 28). Notably the FRINTx instructions are only
available in the vector form.
This is just the decode skeleton which will be filled out by later
patches.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-17-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of the vectorised bitwise operations just operate on larger
chunks at a time. We can do the same for the new half-precision
operations by introducing some TWOHALFOP helpers which work on each
half of a pair of half-precision operations at once.
Hopefully all this hoop jumping will get simpler once we have
generically vectorised helpers here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-16-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Half-precision flush to zero behaviour is controlled by a separate
FZ16 bit in the FPCR. To handle this we pass a pointer to
fp_status_fp16 when working on half-precision operations. The value of
the presented FPCR is calculated from an amalgam of the two when read.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-5-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the SiI9022 (and implicitly EDID I2C) device to the ARM
Versatile Express machine, and selects the two I2C devices necessary
in the arm-softmmu.mak configuration so everything will build
smoothly.
I am implementing proper handling of the graphics in the Linux
kernel and adding proper emulation of SiI9022 and EDID makes the
driver probe as nicely as before, retrieving the resolutions
supported by the "QEMU monitor" and overall just working nice.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180227104903.21353-6-linus.walleij@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for emulating the Silicon Image SII9022 DVI/HDMI
bridge. It's not very clever right now, it just acknowledges
the switch into DDC I2C mode and back. Combining this with the
existing DDC I2C emulation gives the right behavior on the Versatile
Express emulation passing through the QEMU EDID to the emulated
platform.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180227104903.21353-5-linus.walleij@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: explictly reset ddc_req/ddc_skip_finish/ddc]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tx function of the DDC I2C slave emulation was returning 1
on all writes resulting in NACK in the I2C bus. Changing it to
0 makes the DDC I2C work fine with bit-banged I2C such as the
versatile I2C.
I guess it was not affecting whatever I2C controller this was
used with until now, but with the Versatile I2C it surely
does not work.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180227104903.21353-4-linus.walleij@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge tpm 2018/02/21 v2
# gpg: Signature made Tue 27 Feb 2018 13:50:28 GMT
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-02-21-2:
tests: add test for TPM TIS device
tests: Move common TPM test code into tpm-emu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All memory region ROM images have a base address of 0 which causes the overlapping
address check to fail if more than one memory region ROM image is present, or an
existing ROM image is loaded at address 0.
Make sure that we ignore the overlapping address check in
rom_check_and_register_reset() if this is a memory region ROM image. In particular
this fixes the "rom: requested regions overlap" error on startup when trying to
run qemu-system-sparc with a -kernel image since commit 7497638642: "tcx: switch to
load_image_mr() and remove prom_addr hack".
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Boot menu patches by Collin L. Walling
# gpg: Signature made Mon 26 Feb 2018 11:24:21 AM CET
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
* tag 'tags/s390-ccw-bios-2018-02-26':
pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes
s390-ccw: interactive boot menu for scsi
s390-ccw: use zipl values when no boot menu options are present
s390-ccw: set cp_receive mask only when needed and consume pending service irqs
s390-ccw: read user input for boot index via the SCLP console
s390-ccw: print zipl boot menu
s390-ccw: read stage2 boot loader data to find menu
s390-ccw: set up interactive boot menu parameters
s390-ccw: parse and set boot menu options
s390-ccw: move auxiliary IPL data to separate location
s390-ccw: update libc
s390-ccw: refactor IPL structs
s390-ccw: refactor eckd_block_num to use CHS
s390-ccw: refactor boot map table code
# gpg: Signature made Sun 25 Feb 2018 17:54:21 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-2.12-pull-request:
linux-user: MIPS set cpu to r6 CPU if binary is R6
linux-user, m68k: select CPU according to ELF header values
linux-user: introduce functions to detect CPU type
linux-user: Move CPU type name selection to a function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Due to a kernel bug we can never increase the size of capability
set 1, so introduce a new capability set in parallel, old userspace
will continue to use the old set, new userspace will start using
the new one when it detects a fixed kernel.
v2: don't use a define from virglrenderer, just probe it.
v3: fix compilation when virglrenderer disabled
v4: fix style warning, just use ?: op instead.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Message-id: 20180223023814.24459-1-airlied@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
From an architecture point of view, nothing can be mapped into the address
space on s390x. All there is is memory. Therefore there is also not really
an interface to communicate such information to the guest. All we can do is
specify the maximum ram address and guests can probe in that range if
memory is available and usable (TPROT).
Also memory hotplug is strange. The guest can decide at some point in
time to add / remove memory in some range. While the hypervisor can deny
to online an increment, all increments have to be predefined and there is
no way of telling the guest about a newly "hotplugged" increment. So if we
specify right now e.g.
-m 2G,slots=2,maxmem=20G
An ordinary fedora guest will happily online (hotplug) all memory,
resulting in a guest consuming 20G. So it really behaves rather like
-m 22G
There is no way to hotplug memory from the outside like on other
architectures. This is of course bad for upper management layers.
As the guest can create/delete memory regions while it is running, of
course migration support is not available and tricky to implement.
With virtualization, it is different. We might want to map something
into guest address space (e.g. fake DAX devices) and not detect it
automatically as memory. So we really want to use the maxmem and slots
parameter just like on all other architectures. Such devices will have
to expose the applicable memory range themselves. To finally be able to
provide memory hotplug to guests, we will need a new paravirtualized
interface to do that (e.g. something into the direction of virtio-mem).
This implies, that maxmem cannot be used for s390x memory hotplug
anymore and has to go. This simplifies the code quite a bit.
As migration support is not working, this change cannot really break
migration as guests without slots and maxmem don't see the SCLP
features. Also, the ram size calculation does not change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180219174231.10874-1-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
[CH: tweaked patch description, as discussed on list]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The 'bit' field of the 'S390FeatDef' structure is not applicable to all
its instances. Currently this field is not applicable, and remains
unused, iff the feature is of type S390_FEAT_TYPE_MISC. Having the value 0
specified for multiple such feature definitions was a little confusing,
as it's a perfectly legit bit value, and as the value of the bit
field is usually ought to be unique for each feature of a given
feature type.
Let us introduce a specialized macro for defining features of type
S390_FEAT_TYPE_MISC so, that one does not have to specify neither bit nor
type (as the latter is implied).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20180221165628.78946-1-pasic@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Changing the implementation of hmp_info_cpus() to call
qmp_query_cpus_fast() instead of qmp_query_cpus. This has the
following consequences:
o No further code change required for qmp_query_cpus deprecation
o HMP profits from the less disruptive cpu information retrieval
o HMP 'info cpus' won't display architecture specific data anymore,
which should be tolerable in the light of the deprecation of
query-cpus.
In order to allow 'info cpus' to be executed completely on the
fast path, monitor_get_cpu_index() has been adapted to not synchronize
the cpu state.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1518797321-28356-6-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The s390 CPU state can be retrieved without interrupting the
VM execution. Extendend the CpuInfoFast union with architecture
specific data and an implementation for s390.
Return data looks like this:
[
{"thread-id":64301,"props":{"core-id":0},
"arch":"s390","cpu-state":"operating",
"qom-path":"/machine/unattached/device[0]","cpu-index":0},
{"thread-id":64302,"props":{"core-id":1},
"arch":"s390","cpu-state":"operating",
"qom-path":"/machine/unattached/device[1]","cpu-index":1}
]
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1518797321-28356-4-git-send-email-mihajlov@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The query-cpus command has an extremely serious side effect:
it always interrupts all running vCPUs so that they can run
ioctl calls. This can cause a huge performance degradation for
some workloads. And most of the information retrieved by the
ioctl calls are not even used by query-cpus.
This commit introduces a replacement for query-cpus called
query-cpus-fast, which has the following features:
o Never interrupt vCPUs threads. query-cpus-fast only returns
vCPU information maintained by QEMU itself, which should be
sufficient for most management software needs
o Drop "halted" field as it can not be retrieved in a fast
way on most architectures
o Drop irrelevant fields such as "current", "pc" and "arch"
o Rename some fields for better clarification & proper naming
standard
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1518797321-28356-3-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Presently s390x is the only architecture not exposing specific
CPU information via QMP query-cpus. Upstream discussion has shown
that it could make sense to report the architecture specific CPU
state, e.g. to detect that a CPU has been stopped.
With this change the output of query-cpus will look like this on
s390:
[
{"arch": "s390", "current": true,
"props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0,
"qom_path": "/machine/unattached/device[0]",
"halted": false, "thread_id": 63115},
{"arch": "s390", "current": false,
"props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1,
"qom_path": "/machine/unattached/device[1]",
"halted": true, "thread_id": 63116}
]
This change doesn't add the s390-specific data to HMP 'info cpus'.
A follow-on patch will remove all architecture specific information
from there.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1518797321-28356-2-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's add proper alignment checks for a handful of instructions that
require a SPECIFICATION exception in case alignment is violated.
Introduce new wout/in functions. As we are right now only using them for
privileged instructions, we have to add ugly ifdefs to silence
compilers.
Convert STORE CPU ID right away to make use of the wout function.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180215103822.15179-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Alex Bennée