The timer controller include 8 sets of 32-bit decrement counters, based on
either PCLK or 1MHZ clock and the design of timer controller between AST2600
and AST2700 are almost the same.
TIMER0 – TIMER7 has their own individual control and interrupt status register.
In other words, users are able to set timer control in register TMC10 with
different TIMER base address and clear timer control and interrupt status in
register TMC14 with different TIMER base address.
Introduce new "aspeed_2700_timer_read" and "aspeed_2700_timer_write" callback
functions and a new ast2700 class to support AST2700.
The base address of TIMER0 to TIMER7 as following.
Base Address of Timer 0 = 0x12C1_0000
Base Address of Timer 1 = 0x12C1_0040
Base Address of Timer 2 = 0x12C1_0080
Base Address of Timer 3 = 0x12C1_00C0
Base Address of Timer 4 = 0x12C1_0100
Base Address of Timer 5 = 0x12C1_0140
Base Address of Timer 6 = 0x12C1_0180
Base Address of Timer 7 = 0x12C1_01C0
The register address space of each TIMER is "0x40" , and uses the following
formula to get the index and register of each TIMER.
timer_index = offset >> 6;
timer_offset = offset & 0x3f;
The TMC010 is a counter control set and interrupt status register. Write "1" to
TMC10[3:0] will set the specific bits to "1". Introduce a new
"aspeed_2700_timer_set_ctrl" function to handle this register behavior.
The TMC014 is a counter control clear and interrupt status register, to clear
the specific bits to "0", it should write "1" to TMC14[3:0] on the same bit
position. Introduce a new "aspeed_2700_timer_clear_ctrl" function to handle
this register behavior. TMC014 does not support read operation.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24).
According to the design of AST2600 EVB, the Write Protected pin is active
high by default. To support it, introduces a new "sdhci_wp_inverted"
property in ASPEED MACHINE State and set it true for AST2600 EVB
and set "wp_inverted" property true of sdhci-generic model.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241114094839.4128404-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24). However, some boards are
design Write Protected pin active high. In other words, write enable the bit 19
should be 0 and write protected the bit 19 should be 1 at the
Present State Register (0x24). To support it, introduces a new "wp-inverted"
property and set it false by default.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241114094839.4128404-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Because the RNMI interrupt trap handler address is implementation defined.
We add the 'rnmi-interrupt-vector' and 'rnmi-exception-vector' as the property
of the harts. It’s very easy for users to set the address based on their
expectation. This patch also adds the functionality to handle the RNMI signals.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
semihosting, plugin and doc updates:
- log a guest_error for failed semihosting open()
- clean up semihosting includes to reduce build duplication
- re-factor misc device initialisation to fail with &error_exit
- propagate Error * to gdbserver_start sub-functions
- fix 32-bit build of plugins and re-enable by default
- ensure IRQs don't preempt io recompiled instructions
- remove usage of gcc_struct to enable clang builds
- enable clang/lld to build plugins on windows
- various small kdoc typo fixes
- add perl scripts to editorconfig
- remove unused field from MemoryRegion
- make kdoc script a dependency so doc rebuilds get triggered
- expand developer documentation:
- notes on git-publish
- describe usage of b4
- setting up build dependencies
- codebase layout
- add a glossary of common terms
- optimise the windows ndis script
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeKO8sACgkQ+9DbCVqe
# KkTbBQf9HRlspCl2r5a8K9O1ymylKiZ653OBWMStGTQ8xPXeLDFhT+ION34VBgBh
# LXHEcjIHn24cN2s1BO5+xJs0nzqYe7UEAK6JQmdX3/HEuf8VmaVslvhm+nCWKoIL
# JQbsHno92wh6vvTWQu53zijEuG5HdBseWiwQKHbE1oSRc2CikG70o902AL9zXAsp
# mpUYWxUmWwg5uQATztp4XfylJBcSX3SiVgv22jXLqBj9drXPftl/E33fcWXxTj5f
# AM3kz9fxaCfo5+znmYw3R1tT/Hv52Q6hW+oNAm34XeWp1/+ho27QMRrpIi/dpdwX
# mCbvJwI75sCnD91p9NW7vZIYZJKsLg==
# =SLCY
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Jan 2025 06:15:23 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-gdb-plugins-doc-updates-170125-1' of https://gitlab.com/stsquad/qemu: (37 commits)
scripts/nsis.py: Run dependency check for each DLL file only once
docs: add a glossary
docs/devel: add a codebase section
docs/devel: add information on how to setup build environments
docs/devel: add b4 for patch retrieval
docs/devel: add git-publish for patch submitting
docs/sphinx: include kernel-doc script as a dependency
include/exec: remove warning_printed from MemoryRegion
include/exec: fix some copy and paste errors in kdoc
tests/qtest: fix some copy and paste errors in kdoc
editorconfig: update for perl scripts
plugins: fix kdoc annotation
plugins: enable linking with clang/lld
docs/devel/style: add a section about bitfield, and disallow them for packed structures
win32: remove usage of attribute gcc_struct
accel/tcg: also suppress asynchronous IRQs for cpu_io_recompile
configure: reenable plugins by default for 32-bit hosts
contrib/plugins/hotpages: fix 32-bit build
contrib/plugins/hwprofile: fix 32-bit build
contrib/plugins/cflow: fix 32-bit build
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* rust: miscellaneous changes
* target/i386: small code generation improvements
* target/i386: various cleanups and fixes
* cpu: remove env->nr_cores
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmeBoIgUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOD2gf+NK7U1EhNIrsbBsbtu2i7+tnbRKIB
# MTu+Mxb2wz4C7//pxq+vva4bgT3iOuL9RF19PRe/63CMD65xMiwyyNrEWX2HbRIJ
# 5dytLLLdef3yMhHh2x1uZfm54g12Ppvn9kulMCbPawrlqWgg1sZbkUBrRtFzS45c
# NeYjGWWSpBDe7LtsrgSRYLPnz6wWEiy3tDpu2VoDtjrE86UVDXwyzpbtBk9Y8jPi
# CKdvLyQeO9xDE5OoXMjJMlJeQq3D9iwYEprXUqy+RUZtpW7YmqMCf2JQ4dAjVCad
# 07v/kITF4brGCVnzDcDA6W7LqHpBu1w+Hn23yLw3HEDDBt11o9JjQCl9qA==
# =xIQ4
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jan 2025 17:34:48 EST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (38 commits)
i386/cpu: Set and track CPUID_EXT3_CMP_LEG in env->features[FEAT_8000_0001_ECX]
i386/cpu: Set up CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()
cpu: Remove nr_cores from struct CPUState
i386/cpu: Hoist check of CPUID_EXT3_TOPOEXT against threads_per_core
i386/cpu: Track a X86CPUTopoInfo directly in CPUX86State
i386/topology: Introduce helpers for various topology info of different level
i386/topology: Update the comment of x86_apicid_from_topo_ids()
i386/cpu: Drop cores_per_pkg in cpu_x86_cpuid()
i386/cpu: Drop the variable smp_cores and smp_threads in x86_cpu_pre_plug()
i386/cpu: Extract a common fucntion to setup value of MSR_CORE_THREAD_COUNT
target/i386/kvm: Replace ARRAY_SIZE(msr_handlers) with KVM_MSR_FILTER_MAX_RANGES
target/i386/kvm: Clean up error handling in kvm_arch_init()
target/i386/kvm: Return -1 when kvm_msr_energy_thread_init() fails
target/i386/kvm: Clean up return values of MSR filter related functions
target/i386/confidential-guest: Fix comment of x86_confidential_guest_kvm_type()
target/i386/kvm: Drop workaround for KVM_X86_DISABLE_EXITS_HTL typo
target/i386/kvm: Only save/load kvmclock MSRs when kvmclock enabled
target/i386/kvm: Remove local MSR_KVM_WALL_CLOCK and MSR_KVM_SYSTEM_TIME definitions
target/i386/kvm: Add feature bit definitions for KVM CPUID
i386/cpu: Mark avx10_version filtered when prefix is NULL
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This started as a clean-up to properly pass a Error handler to the
gdbserver_start so we could do the right thing for command line and
HMP invocations.
Now that we have cleaned up foreach_device_config_or_exit() in earlier
patches we can further simplify by it by passing &error_fatal instead
of checking the return value. Having a return value is still useful
for HMP though so tweak the return to use a simple bool instead.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-11-alex.bennee@linaro.org>
The CPUState structure is declared in "hw/core/cpu.h",
the EXCP_HALTED definition in "exec/cpu-common.h".
Both headers are indirectly include by "cpu.h". In
order to remove "cpu.h" from "semihosting/console.h",
explicitly include them in console.c, otherwise we'd
get:
../semihosting/console.c:88:11: error: incomplete definition of type 'struct CPUState'
88 | cs->exception_index = EXCP_HALTED;
| ~~^
../semihosting/console.c:88:31: error: use of undeclared identifier 'EXCP_HALTED'
88 | cs->exception_index = EXCP_HALTED;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250103171037.11265-5-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-7-alex.bennee@linaro.org>
Now that we use a functional interface to query whether the opcode
is supported, we can drop the TCG_OPF_NOT_PRESENT bit mapping from
TCG_TARGET_HAS_foo in tcg-opc.h
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The br, mb, goto_tb and exit_tb opcodes do not have
register operands, only constants, flags, or labels.
Remove the special case in opcode_args_ct by including
TCG_OPF_NOT_PRESENT in the flags for these opcodes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we're no longer assigning to TCGOpDef.args_ct,
we can make the array constant.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a new function, opcode_args_ct, to look up the argument
set for an opcode. We lose the ability to assert the correctness
of the map from TCGOpcode to constraint sets at startup, but we can
still validate at runtime upon lookup.
Rename process_op_defs to process_constraint_sets, as it now does
nothing to TCGOpDef.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Process each TCGConstraintSetIndex first. Allocate TCGArgConstraint
arrays based on those. Only afterward process the TCGOpcodes and
share those TCGArgConstraint arrays.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that tcg-target-opc.h.inc is unconditional,
we can move these out of the generic header.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In addition, add empty files for mips, sparc64 and tci.
Make the include unconditional within tcg-opc.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make these features unconditional, as they're used by most
tcg backends anyway. Merge tcg-ldst.c.inc and tcg-pool.c.inc
into tcg.c and mark some of the functions unused, so that
when the features are not used we won't get Werrors.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To be used by some integer operations instead of,
or in addition to, a trailing constant argument.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are not particularly useful outside of optimization passes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the replacement, drop the TCGType - TCG_TYPE_V64 adjustment,
except for the call to tcg_out_vec_op. Pass type to tcg_gen_op[1-6],
so that all integer opcodes gain the type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Xen regression fixes and cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmeIxhcSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVEbKoP/iqQ+PhbwT9+xz6lxW+g1Dx+YGrT/ugp
# d3xHn9AEkR0EHC42J6RB/llyWbKVD/IIhYwUk5GDm+4InGrtuQDhG6UqWxqvIRht
# 0JuZvVm7x5akmKv73igxNqZHVg0ZEAS+EllBUaBYWj0pvpMbBK93Sdz9PXKxA7Nm
# dPeFrOpL2TAmnDCH1UuBbXypHEjAghmv7WFphMtk6qLX+wYVaK3F2J/ed2TNyT0V
# LliOdQH0Pxt445SSVJIZRe9bW3FH7qyvZV1gCnxSnqPUlN7vBhpjzgl4hWEzVYcp
# 7X21ZAD9kPc81DJjYucbLjAbrqSmlDrJqL05qtRigfPcnqz2NoKrYxhj8B0F8mgt
# 1IbymPyeab5gk5Hi1QgMmG5eobDDaglDSxpq6gRfJBiJW+1adif00z/HVvt5onS0
# uQ6i6w5NzQciBX77muAb2ZDEMysjk+3wSJMMpkfl90D0kjlMqeWWs4FH9ThasjC+
# EhQioUD0euedgnzOSfQjNNtAW4gzv9rcShkcV84bjxP/0Es+Pgx9f6wtCUTzdeqy
# Cid8/72lHIgrkZGfpv8BBZkA1XP09vgtUGKyAWm4yHOcB57l8cNiL1nKtqoCLwkQ
# 8JWFWzFeEY19KoiRGY5saH6ExeOx8fmc/lYwqImZqFqvuFX4Vf2RJdTIRIYr7g05
# 2QffxFmskg+A
# =Wz0V
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jan 2025 03:40:55 EST
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'pull-xenfv-20250116' of git://git.infradead.org/users/dwmw2/qemu:
system/runstate: Fix regression, clarify BQL status of exit notifiers
hw/xen: Fix errp handling in xen_console
hw/xen: Use xs_node_read() from xenstore_read_str() instead of open-coding it
hw/xen: Use xs_node_read() from xen_netdev_get_name()
hw/xen: Use xs_node_read() from xen_console_get_name()
hw/xen: Use xs_node_read() from xs_node_vscanf()
xen: do not use '%ms' scanf specifier
hw/xen: Add xs_node_read() helper function
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ4hk/QAKCRAfewwSUazn
# 0WagAQDgJaWBLQxZkyQR2FQm3WHg3Uf/qolab9nDGo3b2BpixgD/RdvZf+mZpAwf
# 2ipAQ7g5GqGTKtTAdqO/aBAqTCZCqQU=
# =7KKt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jan 2025 20:46:37 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250116' of https://gitlab.com/bibo-mao/qemu:
hw/intc/loongarch_ipi: Use alternative implemation for cpu_by_arch_id
hw/intc/loongson_ipi: Add more input parameter for cpu_by_arch_id
hw/intc/loongarch_ipi: Remove property num-cpu
hw/intc/loongarch_ipi: Get cpu number from possible_cpu_arch_ids
hw/intc/loongson_ipi: Remove property num_cpu from loongson_ipi_common
hw/intc/loongson_ipi: Remove num_cpu from loongson_ipi_common
hw/intc/loongarch_ipi: Implement realize interface
target/loongarch: Add page table walker support for debugger usage
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vmclock device addresses the problem of live migration with
precision clocks. The tolerances of a hardware counter (e.g. TSC) are
typically around ±50PPM. A guest will use NTP/PTP/PPS to discipline that
counter against an external source of 'real' time, and track the precise
frequency of the counter as it changes with environmental conditions.
When a guest is live migrated, anything it knows about the frequency of
the underlying counter becomes invalid. It may move from a host where
the counter running at -50PPM of its nominal frequency, to a host where
it runs at +50PPM. There will also be a step change in the value of the
counter, as the correctness of its absolute value at migration is
limited by the accuracy of the source and destination host's time
synchronization.
The device exposes a shared memory region to guests, which can be mapped
all the way to userspace. In the first phase, this merely advertises a
'disruption_marker', which indicates that the guest should throw away any
NTP synchronization it thinks it has, and start again.
Because the region can be exposed all the way to userspace, applications
can still use time from a fast vDSO 'system call', and check the
disruption marker to be sure that their timestamp is indeed truthful.
The structure also allows for the precise time, as known by the host, to
be exposed directly to guests so that they don't have to wait for NTP to
resync from scratch.
The values and fields are based on the nascent virtio-rtc specification,
and the intent is that a version (hopefully precisely this version) of
this structure will be included as an optional part of that spec. In the
meantime, a simple ACPI device along the lines of VMGENID is perfectly
sufficient and is compatible with what's being shipped in certain
commercial hypervisors.
Linux guest support was merged into the 6.13-rc1 kernel:
https://git.kernel.org/torvalds/c/205032724226
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <07fd5e2f529098ad4d7cab1423fe9f4a03a9cc14.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Migration state transfer interface is only used by vhost-user-fs,
so the interface needs to be defined only when vhost is built.
But I need to use this interface with virtio-net and vhost is not always
enabled, and to avoid undefined reference error during build, define stub
functions for vhost_supports_device_state(), vhost_save_backend_state() and
vhost_load_backend_state().
Cc: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20250115135044.799698-2-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split the code into separate functions to allow using the
common CPER filling code by different error sources.
The generic code was moved to ghes_record_cper_errors(),
and ghes_gen_err_data_uncorrectable_recoverable() now contains
only a logic to fill the Generic Error Data part of the record,
as described at:
ACPI 6.2: 18.3.2.7.1 Generic Error Data
The remaining code to generate a memory error now belongs to
acpi_ghes_record_errors() function.
A further patch will give it a better name.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <68d9f787d8c4fc8d1dbc227d6902fe801e42dea9.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This gives user flexibility to turn off FS1GP for debug purpose.
It is also useful for future nesting feature. When host IOMMU doesn't
support FS1GP but vIOMMU does, nested page table on host side works
after turning FS1GP off in vIOMMU.
This property has no effect when vIOMMU is in legacy mode or x-flts=off
in scalable modme.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-20-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VTD spec, stage-1 page table could support 4-level and
5-level paging.
However, 5-level paging translation emulation is unsupported yet.
That means the only supported value for aw_bits is 48. So default
aw_bits to 48 when stage-1 translation is turned on.
For legacy and scalable modes, 48 is the default choice for modern
OS when both 48 and 39 are supported. So it makes sense to set
default to 48 for these two modes too starting from QEMU 9.2.
Use pc_compat_9_1 to handle the compatibility for machines before
9.2.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-17-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to spec, Page-Selective-within-Domain Invalidation (11b):
1. IOTLB entries caching second-stage mappings (PGTT=010b) or pass-through
(PGTT=100b) mappings associated with the specified domain-id and the
input-address range are invalidated.
2. IOTLB entries caching first-stage (PGTT=001b) or nested (PGTT=011b)
mapping associated with specified domain-id are invalidated.
So per spec definition the Page-Selective-within-Domain Invalidation
needs to flush first stage and nested cached IOTLB entries as well.
We don't support nested yet and pass-through mapping is never cached,
so what in iotlb cache are only first-stage and second-stage mappings.
Add a tag pgtt in VTDIOTLBEntry to mark PGTT type of the mapping and
invalidate entries based on PGTT type.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20241212083757.605022-11-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jamin Lin