Hardware blits that overlap an active GPU tile are clipped to the bounds of
that tile. This change checks blits against registered PFB tiles (which are
mirrored to PGRAPH via RDI) and clips blits as needed.
The GL docs indicate that GL_LINK_STATUS will be set to false in cases where
the cached binary cannot be loaded successfully. This seems to be separate
from the listed glGetError failure modes, indicating that both likely need to
be tested.
When specifying lbr_fmt=VALUE in cpu options with an invalid VALUE, error_setg() gets triggered twice, causing an assertion failure in error_setv() which requires *errp to be NULL, preventing meaningful error messages from being displayed.
Fix this by checking visit_type_uint64()'s return value and returning early on failure, consistent with other property setters like set_string().
Fixes: 18c22d7112 (qdev-properties: Add a new macro with bitmask check for uint64_t property)
Cc: qemu-stable@nongnu.org
Signed-off-by: Zesen Liu <ftyghome@gmail.com>
Message-ID: <20251217-qdev-fix-v1-1-bd33ea463220@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Add Fixes: and Cc:]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
vhost_virtqueue_start() can exit early if the descriptor ring address is
0, assuming the virtqueue isn’t ready to start.
In this case, all cached vring information (size, physical address,
pointer) is left as-is. This is OK at first startup, when that info is
still initialized to 0, but after a reset, it will retain old (outdated)
information.
vhost_virtqueue_start() must make sure these values are (re-)set
properly before exiting.
(When using an IOMMU, these outdated values can stall the device:
vhost_dev_start() deliberately produces an IOMMU miss event for each
used vring. If used_phys contains an outdated value, the resulting
lookup may fail, forcing the device to be stopped.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251208113008.153249-1-hreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There are no functional tests for the 'fby35' machine which makes
harder to determine when something becomes deprecated or unused.
The 'fby35' machine was originally added as an example of a multi-SoC
system, with the expectation the models would evolve over time in an
heterogeneous system. This hasn't happened and no public firmware is
available to boot it. It can be replaced by the 'ast2700fc', another
multi-SoC machine based on the newer AST2700 SoCs which are excepted
to receive better support in the future.
Cc: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20251126102424.927527-1-clg@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When the XDMA, RTC and SDHCI device models of the Aspeed SoCs were
first introduced, their MMIO regions inherited of a DEVICE_NATIVE_ENDIAN
endianness. It should be DEVICE_LITTLE_ENDIAN. Fix that.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251125142631.676689-1-clg@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The error message changes from
vhost-vsock: failed to open vhost device: REASON
to
Could not open '/dev/vhost-vsock': REASON
I think the exact file name is more useful to know than the file's
purpose.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251121121438.1249498-8-armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The error message changes from
vhost-scsi: open vhost char device failed: REASON
to
Could not open '/dev/vhost-scsi': REASON
I think the exact file name is more useful to know than the file's
purpose.
We could put back the "vhost-scsi: " prefix with error_prepend(). Not
worth the bother.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251121121438.1249498-7-armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
msix_init() and msix_init_exclusive_bar() take an "unsigned short"
argument for the number of MSI-X vectors to try to use. This is big
enough for the maximum permitted number of vectors, which is 2048.
Unfortunately, we have several devices (most notably virtio) which
allow the user to specify the desired number of vectors, and which
use uint32_t properties for this. If the user sets the property to a
value that is too big for a uint16_t, the value will be truncated
when it is passed to msix_init(), and msix_init() may then return
success if the truncated value is a valid one.
The resulting mismatch between the number of vectors the msix code
thinks the device has and the number of vectors the device itself
thinks it has can cause assertions, such as the one in issue 2631,
where "-device virtio-mouse-pci,vectors=19923041" is interpreted by
msix as "97 vectors" and by the virtio-pci layer as "19923041
vectors"; a guest attempt to access vector 97 thus passes the
virtio-pci bounds checking and hits an essertion in
msix_vector_use().
Avoid this by making msix_init() and its wrapper function
msix_init_exclusive_bar() take the number of vectors as a uint32_t.
The erroneous command line will now produce the warning
qemu-system-i386: -device virtio-mouse-pci,vectors=19923041:
warning: unable to init msix vectors to 19923041
and proceed without crashing. (The virtio device warns and falls
back to not using MSIX, rather than complaining that the option is
not a valid value this is the same as the existing behaviour for
values that are beyond the MSI-X maximum possible value but fit into
a 16-bit integer, like 2049.)
To ensure this doesn't result in potential overflows in calculation
of the BAR size in msix_init_exclusive_bar(), we duplicate the
nentries error-check from msix_init() at the top of
msix_init_exclusive_bar(), so we know nentries is sane before we
start using it.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2631
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251107131044.1321637-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Per the PCI spec 3.0, in section 6.2.5.1, "Address Maps":
A 32-bit register can be implemented to support a single
memory size that is a power of 2 from 16 bytes to 2 GB.
Add a check in nvme_init_pmr(), returning an error if the
PMR region size is too small; and update the QTest.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Set the protection information format (pif) only in the formats that can
support the larger guard types, and update the current in-use format
information when the user changes it.
Signed-off-by: Keith Busch <kbusch@kernel.org>
[k.jensen: fix missing braces and wrong indentation]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Coverity complains about a possible copy-paste error in the verification
of the namespace atomic parameters (CID 1642811). While the check is
correct, the code (and the intention) is unclear.
Fix this by reworking how the parameters are verified. Peter also
identified that the realize function was not correctly erroring out if
parameters were misconfigured, so fix that too.
Lastly, change the error messages to be more describing.
Coverity: CID 1642811
Fixes: bce51b8370 ("hw/nvme: add atomic boundary support")
Fixes: 3b41acc962 ("hw/nvme: enable ns atomic writes")
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Matt Borgerson